How do I uninstall programs that have been installed from the extended ROM that do not have an entry in "Remove Programs"?
ya ... i also wanna know the same ...
alternatively what cab does what in the extended rom so that i can install them as i wish after a hard reset ...
any1? i know there are lotsa geniuses out there ...
After a hard reset, before it starts to install the programs do a soft reset... it stops all default apps from installing.
Other than that... im not sure...
Use a program like CAB manager to learn about the content of the cab-files. Or view them with winzip etc. The default ext-rom cabs have a 'no-uninstall' option, probably that's why you cannot see them in the uninstall screen. But use the previous tip: hard-reset and soft-reset before the customization starts, to end with a clean device. Then install from ext-rom what you think you need, maybe after hacking them, sonyou can uninstall them.
Greetings, M
Hi all,
I've had my S100 for a week now. It came with ROM ver 1.06 (I think) and right on the 1st day I upgraded to 1.11 and finally decided to apply Anansky's Big Storage ROM. All work perfectly even with my Jabra BT800. I've been trying many different 3rd party software. As usual, after installing and deinstalling, my unit became unstable and therefore would like to start from scratch.
In XDA's ftp site there is a Qtek 1.11 Ext ROM zip file. At first I installed all, but I think I could do away with some. Based on the filenames, some are self explanatory but I don't know which ones I can do without. Could someone be kind enough to explain?
Delete_vdisk_shortcut_WWE.sa.CAB What does this do?
Caller_ID_Magician_Generic_WWE_RC13.CAB Selft explanatory
SmartDialing_Magician_Generic_WWE_RC13.CAB I've read in other threads that some don't install this when using sw like MSVoice Commands.
PhonePad_Magician_Generic_WWE_RC12.CAB I think this contains T9 and what else? How can I edit this file to remove unwanted languages other stuff?
CAB-ArcsoftMMS-20022-Magician-Generic-ENU-08Mar05.cab I believe this is essential, right?
CV2.41.386_WWE.CAB No clue. Is it essential?
JMM101257_WWE_1004.CAB No clue. Is it essential?
BTHUSB_PATCH_AKU26.CAB Self explanatory
Version_WWE_111129.sa.CAB What is it for? Is it essential?
And does anyone know of how to delete these .cabs? I hit soft reset before it autoloaded all of those above mentioned .cabs. IS it possible to delete them or at least make them non accessible?
johnannie said:
And does anyone know of how to delete these .cabs? I hit soft reset before it autoloaded all of those above mentioned .cabs. IS it possible to delete them or at least make them non accessible?
Click to expand...
Click to collapse
If you have the Anansky ROM installed I don't think you will have the option to install the extended ROM when you do a hard reset, mine doesn't. You have to install the extended ROM seperately. You should have made a backup of your extended ROM before doing the Anansky hack. If you don't have it, maybe you can download it from the XDA ftp site. Remember only install .cab files, don't execute the autorun or you may wipe out your big storage. Even if you install all of the Ext. ROM files, they don't take up much space in the storage area (maybe 1.5 or 2 meg.) depending on your Ext. ROM.
Thanks for the responses but I would like some information from you experts on the following:
1. Which CAB files can I do away with and why?
2. How can I edit the PhonePad.CAB in order to remove unwanted languages? Any special software needed?
The Qtek 1.11 ExtROM found in this forum's FTP site has 9 CAB files. Some of them like the Caller ID is self explanatory, meaning this must definitely be installed if Caller ID is one of the functions one needs.
I just discoverd that I cannot modify the extended rom (using Total Commander, etc.) How does one unlock it so tht it may be modified?
Thanks,
Frank
fmcgirt said:
I just discoverd that I cannot modify the extended rom (using Total Commander, etc.) How does one unlock it so tht it may be modified?
Thanks,
Frank
Click to expand...
Click to collapse
It can, just try again anad again, i did it on my 4th attemps
Cheers!
Thanks for the response but I haven't had any success after several tries. I tried installing the Wizard unlock cab file and afterwards with Total Commander, I can reset the Read Only bit on all the files and copy the files to my SD card. However, I am unable to delete any files. They appear to be deleted but come back after a soft reset. I would like to especially get rid of all the operator settings files. The rest of the stuff like Skype, Anti Virus and Backgammon I can get rid of using Settings>Remove Programs.
Frank
Isn't "ROM" short for "read only memory"?
hi, I am using Buzz's unlocker for Wizard... it made the ExtROM visible but still it is read only
I need to find how can I delete and add files to it.
Any challenging minds out there?
Total commander does not work with the jamin in my case anyway.
Tried several time with no results.
shahzadkhan15nov said:
hi, I am using Buzz's unlocker for Wizard... it made the ExtROM visible but still it is read only
I need to find how can I delete and add files to it.
Any challenging minds out there?
Click to expand...
Click to collapse
hi,
unlocker for wizard is not mine...
buzz
...well, if anyone can give me a dump of Prophet's bootloader + clean registry export, i can take a look at it..
buzz
Buzz,
Thanks for the great offer.
I can give you the clean reg but how can i get you the first part, bootloader thingie?
Regards
I have used the Wizard Extended ROM unlock program to unlock the ROM on my Prophet. I now have a copy of the Extended ROM on my SD Card. I'm not concerned about erasing the Extended ROM files, I just don't wan them installed, so I did a Hard Reset and just when it says that it will start installing the additional prorams in 3 seconds, I did a soft reset.
OK, now I have a Prophet without extended ROM. I can now install the stuff that I want.
Most of the cab files I've figured out, Does anyone know what the following extended ROM cabs do? This is from the latest Imate Jamin ROM.
Default_CAAVPPC_IMEI_2.6.77_range.CAB
Default_Imate_PPC_SA_V5.5.03.cab
Default_MP_Shortcut_MMS1_JAVA_VOICE_CV_051213.CAB
Default_PP_TSK.CAB
Default_PP_UAString.CAB
Default_PT_Signed_IconDll.sa.CAB
Default_PT_Signed_Patch_SD.sa.CAB
Thanks heaps,
Matterhorn
Default_CAAVPPC_IMEI_2.6.77_range.CAB is the anti-virus app which used to play havoc in slowing down the KJAM. Maybe this version is better but I uninstalled it using Remove Programs. About the rest I am not sure. At least you don't have Skype, backgammon and the Operator Settings files so I expect you will gain a fair amount.
Frank
you can use wince cab manager to see the content of the cab file.
Still nothing? Guess I will go the way of Matterhorn when I need to do a hard reset. Several others have not installed the Extended ROM at all and have reported significant speedup in the JAMin.
Frank
That would be me. I haven't installed one thing off the extended rom and my speed is really pretty good. You can see a video review at the link below to compare the m600 and the jamin (with no extended rom). Keep in mind I don't use mms, skype, antivirus anyway....so no big deal to leave off the ext rom. I also use adobe and don't need the clearview .pdf. Hope the video helps
http://www.howardforums.com/showthread.php?t=849592
Thanks, Mike. I don't use the stuff either except MMS once in a while but can just as easily use email for that. I presume Voice Dial is in the Extended Rom but rather have MS VC anyway and things like Connection Manager, Messaging, etc., that I want are not in the Extended ROM so I should be fine.
Now to find time to do a hard reset and re-install my apps.
Frank
Everyone has diffrent issues, I was able to delete the files from there (verified by refreshing the dir, and I recieved no read only error) but I was unable to write files to it, which I thought was very strange, I am using APA_ext_rom_unlock.exe and it does NOT give me the success msg it acts like it hasnt even ran. I updated my ROM to teh test one that was floating auround 2.8.7 whatever, and I realized too late that aWizard has no way to reflash teh extended ROM so I am without all my Cingular apps and I have all the 2.8.7 Extended rom stuff with the 1.8 Cingular OS ROM which I reverted back to. Any suggestions how I can replace my extended ROM ?
any luck so far?
Hi guys,
Are we getting any hope/luck to unlock Ext ROM for JAMin/Prophet?
I don't know how you guys are doing it. I have tried several times to delete items in my extended rom using total commander, at least 10 times and the result is the same. After the hard reset all that was deleted was re-installed after the reset.
I have contacted TC a while ago, and have not heard anything, maybe they are working on it.
Just curious....as I'm new to this ext rom stuff....but why don't you just "not install" the ext rom. Then use gsfinder to install whichever .cabs you want? If any? Just curious as I may be missing something. :roll:
mikewchandler said:
Just curious....as I'm new to this ext rom stuff....but why don't you just "not install" the ext rom. Then use gsfinder to install whichever .cabs you want? If any? Just curious as I may be missing something. :roll:
Click to expand...
Click to collapse
No, I think the end result would be pretty much the same. For me I would like an Extended ROM for the JAMin that includes exacty what I want installed - no Backgammon, AntiVirus, Smart Dialing, Skype and a single Operator Settings file for TMO USA. Then when I hard reset I don't have to mess with anything else, just let it go. I had my KJAM setup that way and I would like the JAMin to be the same. I would also be as close to an OEM install as I can get (without the junk) so I don't have to worry about proper default settings not being there because of some file I didn't install or installed in the wrong order. Having said all this and thinking about it more I am sure you would get to the same point doing your procedure and then installing the required .cab files in the proper order.
Now I have a question:
Wonder what would happen if I did a hard reset, then did the soft reset to stop the Ext ROM install, installed the required .cab files in order, soft reset and then restored from a Sprite BU file. Wonder would I be restoring any files that could cause problems due to an imcomplete ROM install? I guess I will have to try that first since I do hate to re-install a bunch of apps and especially have to re-enter all the reg codes.
Frank
Hi
I am a newbie to tweaking PDAs and I am expecting a new P3300 from expansys... question is how do I stop unwanted programs from ExtRom to install?
Thank you
My guess is you can't stop them from being installed in original ROM cause that's how it's built. But unofficial, custom ROM builds tend to modify ExtROM.
What can be done is accessing of ExtROM and removing programs from there, but I haven't read much on this subject. Check this for example http://forum.xda-developers.com/showthread.php?t=285519
I am not sure if it is what you want. To stop all the crap from network provider from installing after hard reset I used to soft reset the device as soon as it finishes startup. There is a message for about 2-3 sec that customization is going to install. I then press the reset button and have clean OS (except some small customizations like internet settings and some icons).
one other way to do it which worked for me. i installed Total Commander CE then in the command line I typed \Extended_ROM and it showed the contents of my ExtROM. i deleted all files from there, did a hard reset, and of course nothing was installed from extROM.
unfortunately, some unneccessary programs are in the ROM, not extROM. and there's just no way to delete them, but to create custom ROM....
hi dim4x4 and Adigital
thanks for replying, what I actually intend to do is stop installation of crap software when hard resetting (like clearvue pdf viewer)that are built in to the extended ROM. I just want to install those ones that are necessary to run the machine. I will be getting the HTC p3300.
In my case ClearView is in the ROM, not ExtROM. Try Dopod custom ROMs, they have Adobe Reader LE instead of ClearView.
dim4x4 said:
In my case ClearView is in the ROM, not ExtROM. Try Dopod custom ROMs, they have Adobe Reader LE instead of ClearView.
Click to expand...
Click to collapse
I rarely use Acrobat - infact never - is it possible to remove this from the ROM? can save 2MB space !!!
Hi all,
It's time to make an hard reset on my P3300 (in Portuguese language, unlocked ), and I've learned about not installing the files in the Ext_Rom, with a soft reset just before they begin to install.
I've also learned how to view the Ext_Rom, using Total Commander and from there install only what I want.
I want to install only what is really necessary, but my problem is that I don’t have any idea what each Cab installs, except for TomTom.
I've been searching the Forum but I haven’t find exactly what I'm looking, and that is a description of what each Cab is, what it installs, and also what do you know that is absolutely indispensable to install!
Can anyone make me this description?
Thanks in advance to all
Best regards
Anyone?
Please !!!
These are the Cab's I see with Total Commander.
Besides TT6 and TT voice what are the others?
MP_CVSDcpl_20060718.cab
MP_TT6_Voice26_PTG.cab
MP_ttn.cab
PP_DefaultPage_WWE.cab
PP_ExtVer.xml
PP_RemoveBTInk.cab
ST_PatchPeripheral.cab
Anyone please?
Thanks