Hello All,
I'm a newbie in this forum so forgive me if I'm asking something that has been already asked (I've looked but couldn't find it). Does anyone know where I can find the official Qtek S200 roms, I'm hesitating a little bit to upload a non qtek rom just in case something goes wrong. I wouldn't want to end up with a € 600 phone that doesn't work.
Thanks
If you want the WWE version, I think this is the one:
ftp://xda:[email protected]_2090724_20907106_020720_QtekWWE_Ship.exe
mtrambaioli said:
Hello All,
I'm a newbie in this forum so forgive me if I'm asking something that has been already asked (I've looked but couldn't find it). Does anyone know where I can find the official Qtek S200 roms, I'm hesitating a little bit to upload a non qtek rom just in case something goes wrong. I wouldn't want to end up with a € 600 phone that doesn't work.
Thanks
Click to expand...
Click to collapse
Don't afraid of non-Qtek ROM Qtek is very lazy in update release. I got Dopod 2.15.13 on my born S200. Thу latest Qtek available is as old as 2.9.7.
The ONLY difference between the devices from differend brands is the logo on the panel. Sure.
thanks, I will give it a try
bambacik said:
If you want the WWE version, I think this is the one:
ftp://xda:[email protected]_2090724_20907106_020720_QtekWWE_Ship.exe
Click to expand...
Click to collapse
This is the latest from Qtek. However, the latest across vendors is from Dopod. To upgrade to Dopod WWE ROM follow the tread: http://forum.xda-developers.com/viewtopic.php?t=49298
Sorry in advance for the question
Just as a newbie.. I got Qtek S200 in German (bought in Switzerland) and want WWE version. I guess this thread shows the right steps. Am i right ? the procedure shown here (with the ZIP file) is good for language change ? Does the S200 will change ALL menus on Win Mobile to English ?
Thanks a lot for your answer !
PD> I saw the commercial JFAWM USB card that claims to be a simple way to do it too. What do you think ? is better for a newbie to buy it to avoid problems ? Thanka again.
Is there a newer ROM from Qtek in WWE or GER?
Upgrade tool says that i need a newer ROM for upgrade - now my XDA Neo is in Bootloader Mode
that qtek ROM is corrupt
I think the Qtek WWE ROM in ftp is the latest from Qtek & if after downloading it can be unzip, then it is not corrupt.
Can anyone enlighten newbie here what's IPL and SPL ?
I think the Qtek WWE ROM in ftp is the latest from Qtek & if after downloading it can be unzip, then it is not corrupt.
Click to expand...
Click to collapse
the file in ftp is an exe not a zip for qtek S200 ROM, which seems corrupt,
is there anyplace to get the shipped qtek ROM?
DJW said:
I think the Qtek WWE ROM in ftp is the latest from Qtek & if after downloading it can be unzip, then it is not corrupt.
Click to expand...
Click to collapse
the file in ftp is an exe not a zip for qtek S200 ROM, which seems corrupt,
is there anyplace to get the shipped qtek ROM?
Click to expand...
Click to collapse
The file in the ftp is in fact an .exe zip file (a self-exploding/executing zip file) where you can unzip it either with winzip or winrar. Try opening it with either one of them.
DJW wrote:
Quote:
I think the Qtek WWE ROM in ftp is the latest from Qtek & if after downloading it can be unzip, then it is not corrupt.
the file in ftp is an exe not a zip for qtek S200 ROM, which seems corrupt,
is there anyplace to get the shipped qtek ROM?
The file in the ftp is in fact an .exe zip file (a self-exploding/executing zip file) where you can unzip it either with winzip or winrar. Try opening it with either one of them.
Click to expand...
Click to collapse
i have twice posted that it is corrupt, you have posted twice that it is zipped, have you unzipped it?
it is corrupt now! it was good in the past.
i have twice posted that it is corrupt, you have posted twice that it is zipped, have you unzipped it?
Click to expand...
Click to collapse
I did not said whether it is corrupt or not. I only said it is a zip file & if it can be unzip then it is not corrupt. I already downloaded it before & like Lui-kim-Su mentioned, it was good in the past but not now.
Anyway, I have a copy of it & I have uploaded the file.
Here's the file: ftp://xda:[email protected]_2090724_20907106_020720_QtekWWE_Ship.exe
great, many thanks
qtek s200 WWE rom update
I got my s200 in Switzerland. Unfortunately it is in French. in order to upgrade the rom to Eng version I have tried to connect to the server. but
the ftp server site mentioned in yr forum does not work.
what do I have to do to get the latest WWE rom updtae.
jjadut
Can anyone enlighten newbie here what's IPL and SPL ?
Thanks to all
Here is the GERMAN:
http://rapidshare.de/files/27586025/RUU_Prophet_2090732_20907115_020720_QtekGER_Ship.rar.html
Related
Hi
Is it possible to get WM 2003 on the XDA 1. ie upgrade the 2002 version supplied with the XDA1
If so is there a step by step guide to the process.
Thanks in advance for any help
Cheers
Ric
I read this message on this forum and would like some help please
"T-mobile WM 2003 for MDA I will be available 29.Dec.03 ???"
Yes it is possible to upgrade your XDA I. I put the T-Mobile Backup-Rom provided here on my XDA I and it works perfectly. How to do it, is explained there as well. But be aware that the ROM provided there is a German one. I don't know how to change it into an English one.
C U @ Mallorca
The ENG version is here ftp://tmobile:[email protected]:21 .. but be careful as it contains the upgrade for both RSU and ROM.
ERROR 012:CHECK ERROR
Biso007 said:
The ENG version is here ftp://tmobile:[email protected]:21 .. but be careful as it contains the upgrade for both RSU and ROM.
Click to expand...
Click to collapse
Hi,
I'm trying to upgrade ma O2 XDA I from:
ROM 3.17.03 ENG (original from O2 web site)
RSU 4.21.00 (original from O2 web site)
to upgreade downloaded from
ftp://tmobile:[email protected]:21
but the InstallShield shows this errore message:
=================================
ERROR 012 : CHECK ERROR
The ROM Image that you are trying to upgrade is not compatible with your Pocket PC.
Please compare the device and upgrade information below.
Your current device information:
Model: PW10A1
ROM Version 3.17
Language : English
Your upgrade image informatin:
Model: PW10B1
ROM Version: 4.01
Language: English
Please download the compatible utility and try again.
==========================================
What means "Model: PW10B1" ?
How can i upgrade my O2 XDA I to WM2003?
thanks in advance
Marco
[/img]
your device is 900/1800mhz = the A model
the upgrade you trying to put on it is the american version hence tmobile.... which is 900/1900 the B version
gaz
EURO Upgrade
Where can i found an european wm2003 upgrade (in english, not in german)?
marco
the versions of wm2003 you can only use are:
v4.00.01, v4.00.05 & v4.00.11 no other versions of wm2003 as of yet the others are american versions.
www.yorch.net
Gaz, ur right but the A,B difference is significant only for RSU upgrades. That's why it's performed with TMO 4.01.00 file as it contains both RSU and ROM upgrades. But if you use Winzip to extract the ROM files only, I don't think it will show this error.
However, I 'm still waiting to see a kitchen option based on 4.01.00, but seems the focus now is on XDA II stuff
Is there any chance you could send me the 4.01.00 file, can't find it anywhere. Ronnie
just check 6 posts higher in this thread :wink:
Your a GOD, thanx :wink:
Hello Biso;
I downloaded the file, right clicked on it and used the winzip options to unzip it to a folder where I found a file named upgrade and a folder named English. I found the folder to contain the rsu, so I did not try to use it as you recommended, and I double clicked on the upgrade.exe file. Unfrotunately the same error message of device a and b came in and I could not continue.
What I am doing wrong.??
aabarakat said:
Hello Biso;
I downloaded the file, right clicked on it and used the winzip options to unzip it to a folder where I found a file named upgrade and a folder named English. I found the folder to contain the rsu, so I did not try to use it as you recommended, and I double clicked on the upgrade.exe file. Unfrotunately the same error message of device a and b came in and I could not continue.
What I am doing wrong.??
Click to expand...
Click to collapse
Nothing wrong, All upgrades made by operators will do such check and since your device seems to be PW10A then you will always get this error if you use the EXE method.
In the \English directory, you will find a file named NK.nbf which should have a size of 32 MB. After extracting this file, you have 2 options:
1. If you have SD card and reader/writer, put it on the SD card and flash your XDA through the bootloader.
OR
2. Use the XDAtools from this site and make the source is the NK file and the destination is the XDA flash ROM.
2. Use the XDAtools from this site and make the source is the NK file and the destination is the XDA flash ROM
Thank you very much Biso, you were of great help. I just flashed the rom and I know I will enjoy it. by the way I changed my device to qtek 1010, to have an extra 32 of ram.
BTW do you know a cool site from which I can change the skin of the phone. I just did not like the TM logo
Click to expand...
Click to collapse
Click to expand...
Click to collapse
2. Use the XDAtools from this site and make the source is the NK file and the destination is the XDA flash ROM
Thank you very much Biso, you were of great help. I just flashed the rom and I know I will enjoy it. by the way I changed my device to qtek 1010, to have an extra 32 of ram.
BTW do you know a cool site from which I can change the skin of the phone. I just did not like the TM logo
Click to expand...
Click to collapse
Hello to all of you,
Please help me to upgrade my Qtek 1010 to WM2003
device information:
Model: PW10A1
ROM Version: 3.16.70 FRA
Radio 3.19.1
1 Is it possible to update to wm2003
2 What rom update to use ,
3 Where can I get it ,
4 Is it possible to cook a rom in French ?
Thank you all for your help .
Florin
florin said:
Hello to all of you,
Please help me to upgrade my Qtek 1010 to WM2003
device information:
Model: PW10A1
ROM Version: 3.16.70 FRA
Radio 3.19.1
1 Is it possible to update to wm2003
2 What rom update to use ,
3 Where can I get it ,
4 Is it possible to cook a rom in French ?
Thank you all for your help .
Florin
Click to expand...
Click to collapse
Sorry for late reply. Dunno why nobody has replied to you yet.
I don't know if you can get a french version of ROM, but the one in English released by ATT for Siemens SX56 (A.30.09 ENG) works very good. I upgraded my Qtek 1010 from version 3.14 to wm2003 several versions cooked in Jeff's kitchen but I have so far found this to be the most stable and convenient. Not only that, many bugs in the earlier versions of wm2003 are fixed. (Multiple Reset Notification bug still exists but it can be handled by scarybear software available free at http://www.scarybearsoftware.com
You can get it if you follow this thread:
http://forum.xda-developers.com/viewtopic.php?t=5623&highlight=qtek+wm2003
I discovered that the Activesync method to flash this ROM does not work. The Program A just does not run. I used SD card method. It works.
The ATT release comes with ROM upgrade and Radio Upgrade files. If you are not having any problems with your present radio, never attempt to upgrade the Radio Stack. You can find enough dead devices if you browse through this forum.
Somewhere I read in this forum that the NK.NBF file can be extracted from the downloaded file, however I could not figure out how. I ran the application and quit before it started to flash the device. You can find the NK.NBF file in c:\Program Files\SX56 Upgrade*\...\english\ folder.
You can get the .nbf file out by just opening the .exe file with winzip. At least that's how I did it
Perhaps it can be done with winzip. I use Ultimate Zip and it does not allow it
i just change the extention from exe to zip and the file acts like any other zip file
Hi,
> Newbie: first post <
First, I want to apologize if that kind of topic had been already posted (sure it has been posted!)
I've bought an I-mate JAM in Dubai and upgraded it with the 1.06 WWE Rom proposed on the Club I-Mate site in March. I decided to change that rom in purpose to have my Jam totaly in french but I don't know how exactly because there's a lot of different roms.
Furthermore, I've tried several times to flash my "precious" with the first Fr rom proposed here but after having done the reset (after doing "d2s 80000000 04000000 in romupdate.exe"), ActiveSync do not recognize the device and I can't continue (must be guest partnership, right?).
Should I downgrade that 1.06WWE rom to an older WWE Rom first?
If not, what is the precise procedure?
Already asked? Just give me the link.
Thank you very much.
PS: 'search' function already done.
No Idea? Still waiting for an advice.
here try this file to upgrade... just place this file inside the extracted ROM of your choice and run it ...... you will get a country ID error... don't mind the error just click ok and run the file again (notice that your device will be in the bootloader mode and you should keep it that way).....
and you will find the ROM you want in the ftp...
hope that helps.....
Thanks Papa Docta,
I had this file but deleted it like a noob...thank you!
So I can download the last Qtek FR rom instead of my actual I-Mate WWE rom, fix the country id with the file, and upgrade...
Seems to be easy...TOO easy? :?
yep... download the ROM u like, doesn't have to be the imate wwe and enjoy......
Hello,
Can anyone please upload the latest Qtek S200 WWE ROM version?
Thank you!
ftp://xdaupload:[email protected]_2090724_20907106_020720_QtekWWE_Ship.exe
thanks
what's date ?
one question
can i upgrade my imate jamin with qtek rom or dopods rom ?
Am I able to use my previously backed up data (SpriteBackup) when I flash to the a different ROM? Or is the back up useless after a ROM upgrade?
Also, what different with this Qtek ROM?
My s200 runs very smoothly at the moment, dont know if I should upgrade at all.
Any thoughts?
garfi said:
one question
can i upgrade my imate jamin with qtek rom or dopods rom ?
Click to expand...
Click to collapse
As far as i know, yes.
My Qtek was shipped with mentioned WWE ROM (2.9.7./2.9.7.106). It was unstable and slow... After a week of use... Damn!
Now I am on Dopod's WWE 2.15.13.27/2.15.13.121, and feel good, no-more-stupid-soft-resets, feeling much faster and very stable.
If you have some good and stable ROM, I suggest not to change to this one...
i think the same !!!
the new Dopod ROM is the best
here the link :
ftp://xda:[email protected]/Pr...2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
if you need it ! here the NoVendorID crack fron Machinagod
ftp://xda:[email protected]/Pr...13121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
enjoy!!!
make sure you CID unlocked your prophet or you can't flash it 100% back to anything else.
the dopod rom sucked for me (without the extended rom is was more stable than with the extended rom).
i prefer the jamin rom.
difference beetween ?
ship and shipnovendor ?
thx.
one question,can i update my qtek s200 form CHS test rom to this Rom?
yes you can
take rom novendor
Dear friend,
there is someone can tell me how upgrade my XDA neo (german rom)with the ultimate and better WWE rom?
Which is the better english rom?
Which program I have to use?
Someone can help me, please?
I got the same problem as cucchiarellid can someone reply us plz .. ill be very thankful ..
1. download the new Dopod ROM here:
ftp://xda:[email protected]/Pr...2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
2.extract with winrar or whatever the downloaded file and replace the original "romupdateutility" with This:
ftp://xda:[email protected]/Pr...13121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
3. and run it !!!
FINISH !!!
rodigezstyle said:
1. download the new Dopod ROM here:
ftp://xda:[email protected]/Pr...2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
2.extract with winrar or whatever the downloaded file and replace the original "romupdateutility" with This:
ftp://xda:[email protected]/Pr...13121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
3. and run it !!!
FINISH !!!
Click to expand...
Click to collapse
Wrong... The second referencied file has all you need to upgrade, incluning images and NoVendor update utility on place. Just download, extract, run, follow the screens. And be patiend, there some stops during upgrade, looks like nothing happens and all hungs. Just be patient for 10-15 minutes.
Hi all;
Im agree with J-Walker
Just download the Novender and execute RomUpdateUtility
It works fine on my Qtek S200 but how can I change the language because Im French and English is not my speciality ?
Does it exist another ROM in FR?
blacriderv said:
Hi all;
Im agree with J-Walker
Just download the Novender and execute RomUpdateUtility
It works fine on my Qtek S200 but how can I change the language because Im French and English is not my speciality ?
Does it exist another ROM in FR?
Click to expand...
Click to collapse
Oooops... The ROM is WWE, it means it support locales, but the interface is English only. To get French you need French ROM (it's downgrade, not so easy as go up) or some third-party interface localisation pack.
one question, if i upgrade the rom of my qtek s200 i will lose all my data and installed programs?
Thank you
If i upgrade my xda neo to dopod ROM, is there any way to go back to my original xda Neo ROM ? By applying patch from http://www.o2-online.de/o2/kunden/technikundeinst/exclusive/xda/xdaneo/index.html?nidx=1 for instance ..
I finally unlocked extrom on JAMin for BOTH read and write acces, now i'm struggling how to make it work with my cabz? I mean every1 says there is cofig.txt or autocnfig.txt in the extrom, and i've seen one from Orange's Extrom i got from xda-dev ftp, but i dont see it in my own extrom, though the programs would install after HARDreset. Is it like ALL cabz from ExtRom are being installed or do i need to add that file?
Any help would be kindly appreciated!
From what version of the software have you extracted the extended rom??
Is it possible to upload all the cabs from that extended rom???
I-mate JAMin oz Rom, 2.13.something, latest one.
ftp://ftp.xda-developers.com/Uploads/prophet-roms/JAMin_ext_rom.zip
Thkx for the upload, but the zip only have operator settings and the file is to small. I've dumped mine S200 ext. rom and it was about 9 MB.
onesolo said:
Thkx for the upload, but the zip only have operator settings and the file is to small. I've dumped mine S200 ext. rom and it was about 9 MB.
Click to expand...
Click to collapse
Hey mate, it's all I-mate HAS in extRom, trust me. It's bout 4,5 megs. And the zip i uploaded should've had MORE than op's cabz/