Related
What i'd like to do is assign more than 1 binding to the outlook button.
Exactly the same as the "voice dial" one has as standard (press for voice dial, hold for voice memo)
What i want is (on the mail/outlook/text button) press to open outlook, hold to start new text message.
Is there a reg key to change to allow this dual use?
If not (and i'd rather not add more software to map buttons) what software will allow this? Multipress isn't really an option, as pressing the button again now will cycle through the different text settings (sms, mms, e-mail etc) and put you in whatever folder you were in last (inbox, outbox etc)
EDIT:
While i would still like to be able to do this, thanx to vijay555 who's phone tools 2 lets me start a blank sms from a today screen .lnk file
The only way to do it is using Vito Button mapper.
Button mapper supports macros as well.
Beeble
Have you read the thread about putting VJSMS on the softkeys, to start an sms straight from that key..
I'll have another related release that you'll hopefully like, coming soon.
V
carphead said:
The only way to do it is using Vito Button mapper.
Click to expand...
Click to collapse
I had to hard reset my Qtek9100 after Vito Button mapper installation, so I couldn't recommend it...
uppps another one ?¿?
Regards
vijay555 said:
Beeble
Have you read the thread about putting VJSMS on the softkeys, to start an sms straight from that key..
I'll have another related release that you'll hopefully like, coming soon.
V
Click to expand...
Click to collapse
I'll search some more later and keep an eye on your site!
Vito Button Mapper works here, but after a soft reset I get a popup message saying a certificate is missing.
Also, after installation my backlight was turned off. Went to settings and restored it and all works fine now (also after a reset... only problem is the popup)
Vito Button Mapper screwed up my softkeys.
Only in the 'Today Screen' however thats were a couple of my most used buttons were.
Now they don't work and sometimes change?
I would urge you NOT TO USE if you want to use soft keys in Today screen.
Robin
Soft keys can be configurated in the app, that is why you lost them for now...
Reconfig them:
Start -> Settings -> Buttons
Configuration drop down -> Today
Top 2 entries: Left softkey & Right softkey
Well yours must be different to mine.
When I open buttons the only choices I have are for the 5 hardware buttons.
No other choices are available????????
Robin
Is there a way to easily adjust the volume using the wheel? Or do we have to get the stylus out :?
Cheers
Just tried SPB pocket plus but it doesnt have a volume indicator, just a control which doesnt show what the volume is set to!
any clues?
What is it that you want to do?
If you move the jogwheel during a call, you can change the voulme of the speaker...
OK, But do you know how to adjust the volume when not in a call without tapping the screen? is there a way to do this please?
probably clumsier than tapping the screen, but if you have both Spb Pocket Plus and MS VoiceCommand, you can issue commands for Volume Up, Volume Down, Volume Loop, and Mute.
You can also tapp on the Comm Manager button and toggle the between (preset volume), (vibrate), and (silent).
Is there a good screen tap recorder which works with the tytn?
I tried Vitobuttonmapper which does this but it messed up all my other button assignments! I just want to be able to assign the voicedialler press and hold function to bring up the volume bubble!
Anyone found a prog which will turn a screen tap into an .exe which will be assignable to a button?
Vijay?
Anyone??????
with aebutton plus 2.4.3 beta (its now in 2.4.4 beta), if you remap the "ok" buttons after adding it, you can select it in such a way (under "\options\restore volume slider\" select "if today is active").
Now in the today screen, when you press the ok button, the volume slider will be activated. You can then use he left right up/down keys to select the volume of choice.
However, upon capturing the ok button, i have to map the ok button to close active apps when pressed twice. Pressing it once, regardless of the program in the foreground yields nothing.
To minimize, i have the use the red phone button.
I use the following mortscript:
Code:
MouseClick 160,0
Sleep 100
MouseClick 160,200
In portrait QVGA.
There's a neater way with VJKeyPress as well, but I can't remember the settings right now
If necessary it'll be easy to turn this into a seperate app.
V
vijay555 said:
If necessary it'll be easy to turn this into a seperate app.
V
Click to expand...
Click to collapse
That would be v. nice! would it be possible to make it landscape aware too?
(i'm to much of a thicky for mortscript..... )
The lack of hardware keys (without the keyboard attatched) on the x7501 was my biggest reservation while deciding to buy it. Now I'm having trouble with AEBPlus and HButton (would be perfect if I could use AEBPlus & assgn Hbuttons to the Long Press mode, but it doesn't work). I can't seem to get the flexibilty in button assignments like I had wiith my wizard, I think because a lot of the long keypresses are OS assigned and not UI available.
I don't want to start reg hacking in my random ways if someone has more experience, or better software ideas, and would be willing to share it.
(I keep my unit in the case without the buttons locked when it's in standby, so if I hit a hdwe key, I only have to do that once to get a specific Mortbutton menu up. 2 gestures to anything is my goal. Hbutton often can allow only 1, but I only get 2 keys out of it CommMgr/Record & Camera, my "IE" button longpress seems to be commandeered by VueFlo (cute but pretty useless). If I use that the AEBPlus doesn't seem to work on the other keys.)
UPDATE: I reinstalled AEBPlus, this time with the PC/Activesync installer instead of the cab. The cab installation I did didn't seem to change things. In any case, AEBPlus is working now.
Thanks!
Janis said:
The lack of hardware keys (without the keyboard attatched) on the x7501 was my biggest reservation while deciding to buy it. Now I'm having trouble with AEBPlus and HButton (would be perfect if I could use AEBPlus & assgn Hbuttons to the Long Press mode, but it doesn't work). I can't seem to get the flexibilty in button assignments like I had wiith my wizard, I think because a lot of the long keypresses are OS assigned and not UI available.
I don't want to start reg hacking in my random ways if someone has more experience, or better software ideas, and would be willing to share it.
(I keep my unit in the case without the buttons locked when it's in standby, so if I hit a hdwe key, I only have to do that once to get a specific Mortbutton menu up. 2 gestures to anything is my goal. Hbutton often can allow only 1, but I only get 2 keys out of it CommMgr/Record & Camera, my "IE" button longpress seems to be commandeered by VueFlo (cute but pretty useless). If I use that the AEBPlus doesn't seem to work on the other keys.)
Thanks!
Click to expand...
Click to collapse
AEButton will generally do long presses, double presses, and triple presses... if they are available. As you mention, this seems to be a hardware problem. Example, the "e" (internet) button uses the long press to activate/deactivate the motion sensor within your browser.
As a former Wizard owner, I know where you are coming from. Remapping the "e", "record", and "Win" buttons has given me about 9 quick launches, one of which is WkTask which gives another 12 on a pop-up panel--not to mention showing all open windows on the top bar. Also, the big screen makes iLauncher usable. And I still use good-ole SmallMenu. So I'm doing OK with opening things quickly. But I do miss having all those button launches from the Wizard.
Doing better
HButton and AEBPlus don't play well together at all.
I'm on AEBPlus, post flash, and don't get any long-presses, but I have 3 possiblilities on each of the buttons. Along with MortButtons and actually using the CommMgr instead of hdwe keys, I seem to be getting along well enough.
I had the basic edit commands (select all, copy, cut, paste) assigned to a key in AEBPlus, and turn on/off BT and WiFi. That's what I miss. I use MortButtons for it now, so it's a two-step process, but it works.
The problem with "long keypress'es" for many buttons like Ok/Win/VueFlo etc) is caused by keyboard driver implementation and may not be resolved on application level. The button driver returns both "key was pressed" and "keys was released" events simultaneously, right after button was phisically released. So application could not define time period button was in pressed state to decide if it was long or short keypress...
As for BPlus configuration for my Athena (I have no keyboard at al and use bplus only):
* Button 2 (40C2): (IE button)
1: Call default handler
2: "Messaging"
3: "Notes"
* Button 3 (40C3): (wireless manager)
1: Rotate Screen
2: Show Actions Menu
3: Switch Flashlight Off/On
* OK key (4075):
1: Press Green Button
2: "Contacts"
3: "Calendar"
* Windows key (405B):
1: "Notes"
2: "File Explorer"
3: Show Actions Menu
* Enter/Action (000D):
1: Call default handler
Long: Task Manager
* Volume Up (0075):
Change volume or...
1: Volume Up
2: Backlight Up
Long: Backlight Level 10
* Volume Down (0076):
Change volume or...
1: Volume Down
2: Backlight Down
Long: Backlight Level 1
Action menu items:
Rotate Screen
Switch BlueTooth off/on
Switch WiFi Off/On
Trigger Online
Disable "Power off if not used"...
Device Lock
Click to expand...
Click to collapse
P.S.: I reviewed this forum very occasionaly so you'd better to ask me via e-mail if any
AE, love the program but have one problem. The "ok/close" function is never "close", just always "ok".
The only way that I know of to map the OK button to really be "ok/close" is to configure an hbutton key to be "ok/close" and then use AEbplus to make that hbutton.lnk to the OK key. It's a bit convoluted and requires both programs being loaded and running (hbutton uses more memory than aebplus), but it's the only way to make it work.
Any way to fix the "ok/close" function in AEbplus? Even when there is an "X" in the upper right corner, AEbplus only minimizes the app, never closes.
Has anyone tried remapping or assigning the keyboard buttons to launch applications?
===
Is it possible to get the Half-Press-Function of the Camera-Button assigned for normal working(windows-mode, not camera-mode)??
greetz
Hi Everyone,
I would like to disable the redial capability of the green talk key on the front of my Mogul. Specifically, I would like to avoid accidental re-dials when my Mogul is bouncing around my briefcase. I have case for my Mogul, but it doesn't protect the talk key. Therefore, I simply want to disable the redial capability of the talk key, but still (hopefully) be able to answers calls by pressing it.
Any ideas?
Jay
bump
bumping once
JayUSA said:
bumping once
Click to expand...
Click to collapse
Use a program to lock like S2U2. I would not do that reg hack to my phone.
Just turn on the keylock from your control panel. It'll lock all buttons except for the power button, but the call button will still work for incoming calls.
I'm with you. I would like to disable the redial also.
I'm currently using the 'lock' function and VJDeviceLock to automatically lock it.
S2U2 has 'holes' in it and I would still get redials. Plus it is a bit of overkill for what I needed.
ScottC said:
Just turn on the keylock from your control panel. It'll lock all buttons except for the power button, but the call button will still work for incoming calls.
Click to expand...
Click to collapse
Yes, that works, but for me the danger is after I've hung up and am still using the pda functions... one false double-tap of the green button and it's star-69-ville.
Anyone know how to disable the hardware buttons for the incoming call screen?
I only want to answer/reject calls with the slider, not the hardware buttons as I sometimes touch them by accident while getting the phone out of my pocket.
I've tried PocketShield but didn't like it, although it was able to disable the hardware buttons. Any other suggestions?
Have you already tried s2u2? The slider can receive/reject incoming calls and you also have options to disable the hardware buttons. Works great on my elf.
I tried it some days ago, couldn't get it to work the way I wanted it to, mainly because I don't want to use the locking part. I always lock my device with the power button and I only wanted to have the ability to disable the hardware buttons for incoming calls.
After your message, I decided to install it again and give it another try. Changed some of the settings and I think I finally managed to get it working the way I want to!
It's a bit of a memory consuming app for just disabling the hardware buttons for incoming calls, but hey, it works
Thanks!
If anyone finds a solution without using S2U2, please let me know!
Ok, I have uninstalled S2U2 again. Even though it did do the job, it was also a memory consuming application just for disabling the answer/reject keys during incoming calls and I want to keep my device as clean as possible.
I have searched for hours trying to find a solution to this what I think is a very common problem. How many of you have accidentally accepted or rejected calls because of the hardware buttons? In my opinion, HTC should have thought about this and provide a solution for it.
Anyone with a better solution than S2U2?
Thanks for your input!
New version 1.40 of S2U2 uses MUCH less battery. I almost don't notice, it's running. Great program at least for me.
Since your previous post S2U2 1.4 has been released. This is supposed to address the issues you mention.
can you tell me how you have set your settings for just disabling the hardware buttons for incoming calls in s2u2 ? Thanks
I've used AE Button Plus to disable the 'Answer Call' an 'End Call' hardware keys as I had the same annoying problem of accidentally rejecting a call when taking the device out of my pocket. This works well for me and have now enabled the keys to turn wifi and bluetooth off and on with 3 taps.
Thanks everyone!
I wasn't aware of the latest S2U2 version and I almost gave it another try until I read Anfloyd's post.
I did look at AE Button Plus before, but didn't think it was capable of doing what I wanted: disable the hardware buttons during incoming calls, but still have them functional when there isn't an incoming call (such as showing the phone dial screen which it does by default).
When I looked at the AE Button Plus website, I noticed I couldn't configure the buttons based on the current active screen/program. So, even though I knew I could disable the hardware buttons, I thought I would then loose the whole functionality of them..and that would make the answer and reject buttons on my device useless.
BUT, after reading your message Anfloyd, it got me thinking..I don't need to configure it based on the current screen/program. I can just disable the buttons for 1 tap..and assign programs for them for 3 taps for example.
So, now I have this:
- 1 tap: do nothing. This way, both the answer and reject buttons are not working during incoming calls and I can only use the slider to accept/reject calls.
- 3 taps for answer button: start the phone application.
- 3 taps for reject button: nothing yet, but I'll find something
This is a solution I can work with! I have only tested it for a short time, so if it turns out that AE Button Plus is causing problems I'll give the latest S2U2 another try, but so far this seems to be working just fine.
Thanks again for your input!
ChrisVDD, those options can be found in the S2U2 settings. I don't have S2U2 installed anymore so I don't remember the exact settings. I just disabled all locking features that I didn't need, selected to disable the hardware buttons and chose to use the slider. Give it a try, you should be able to sort it out. If you can't, let me know and I'll install S2U2 again to see what settings you need.
My config in AEBplus
left hardware key
1 tab do nothing
2 press green key
right hardware key
1 tab do nothing
2 press red key
3 rotate display
PhaseIV said:
My config in AEBplus
left hardware key
1 tab do nothing
2 press green key
right hardware key
1 tab do nothing
2 press red key
3 rotate display
Click to expand...
Click to collapse
Would you so kind please and tell me how to configure more than 1 actions to a button.
When I choose green phone button i can only say disable, but dont now how to get another function to work with same button.
I would like to have :
tap 1x = do nothing,
tap 3x = start phone application (normal behaviour.
Would you so kind please and tell me how to configure more than 1 actions to a button.
When I choose green phone button i can only say disable, but dont now how to get another function to work with same button.
I would like to have :
tap 1x = do nothing,
tap 3x = start phone application (normal behaviour.
Click to expand...
Click to collapse
First, select and hold "Green Phone button".
Then do this from top to bottom:
3. Handle by AEBPlus
1. Single press
1. None
..and select Ok
Then select and hold "Green Phone button" again.
Do this from top to bottom:
3. Handle by AEBPlus
3. Triple press
13. Press Green Button
..and select Ok
Then File > Save and Exit
That's it
GryphonLeon said:
First, select and hold "Green Phone button".
Then do this from top to bottom:
3. Handle by AEBPlus
1. Single press
1. None
..and select Ok
Then select and hold "Green Phone button" again.
Do this from top to bottom:
3. Handle by AEBPlus
3. Triple press
13. Press Green Button
..and select Ok
Then File > Save and Exit
That's it
Click to expand...
Click to collapse
Thank you for your fast reply, now It works like I wanted it to do.
Is it possible to end call using red hardware button but not to ignore it before answering? I tried AEBplus and it works like it should but that's not all I needed.
danum said:
Since your previous post S2U2 1.4 has been released. This is supposed to address the issues you mention.
Click to expand...
Click to collapse
The problem I have with s2u2 is that I cannot mute incoming calls... The voulme buttons are locked... the touch screen is locked and mute on face down also does not work....
Maybe A_C will allow us which buttons to lock in the next release...