Related
On a PC, you can go to http://wap.oa.yahoo.com, and login to your yahoo account to read your emails, etc.
If I do the same from my XDA2, it says "Unable to connect: Ensure that your modems are present and inserted correctly, and no network card present".
If I try this with any other web site (e.g. http://www.bbc.co.uk) it connects and works fine.
Does anyone else get this, and does anyone know a way around it?
Thanks!
On my XDA, http://wap.oa.yahoo.com works fine.
But WAP stinks on a capable device like the XDA or XDAII. Why not use http://www.yahoo.com instead, or set up your Inbox to download your Yahoo headers and/or messages?
can i realy do that?? setup INBOX for yahoooo???
please show me how! i couldnt even set the outlook express on PC to do that!
thanks a million.
pdhenry said:
Why not use http://www.yahoo.com instead, or set up your Inbox to download your Yahoo headers and/or messages?
Click to expand...
Click to collapse
You can only do this if you pay extra for POP3 access to Yahoo emails - which I don't want to do as this isn't my primary email account.
Also, going through http://www.yahoo.com means you get all the ads, graphics, etc. Even over a GPRS line, this makes it quite painfull.
d-o-h! said:
On a PC, you can go to http://wap.oa.yahoo.com, and login to your yahoo account to read your emails, etc.
If I do the same from my XDA2, it says "Unable to connect: Ensure that your modems are present and inserted correctly, and no network card present".
If I try this with any other web site (e.g. http://www.bbc.co.uk) it connects and works fine.
Does anyone else get this, and does anyone know a way around it?
Thanks!
Click to expand...
Click to collapse
I just got a new XDA II and I could access Yahoo without problems. After an involutary hard reset all the O2 stuff got installed (seems it was not installed the first time I used the device), and now I'm having the same problem as you're describing. Has O2 added something "clever" so that if it sees "wap" in the path, it thinks it should use a wap connection? In any case I can't find these settings and delete it. I want it to work as it did before the hard reset! Help!
Try wsp://wap.oa.yahoo.com insted of http://wap.oa.yahoo.com
HTTP = PC
WSP = WAP
8)
cheers
WSP doesn't work either. Probably because that signals even more to the computer that you're trying to establish a WAP connection, which I don't want to do and which isn't set up either. The funny thing is that it worked before the hard reset, and I never had any problems on my old XDA I.
I managed to remove all the O2 stuff from the extended ROM, and after a hard reset, I can now access http://mobile.yahoo.com/mail again! Once you access http://mobile.yahoo.com/mail, the path changes to http://wap.oa... and from this point on it complained. Until I removed the O2 stuff. So now I'm happy it works, but I'd still like to know what settings O2 infiltrated to stop it from working. Does anyone have a clue?
astryger said:
So now I'm happy it works, but I'd still like to know what settings O2 infiltrated to stop it from working. Does anyone have a clue?
Click to expand...
Click to collapse
I think it have something to do with Connection settings and or Registery settings for Browser ID string (User ID String)
example:
Of youre browser ID is "Mozilla/4.0(compatible; MSIE 4.01; Windows CE; PPC; 240x320)" Than you w'll get a diffrent page if you have something else.
After I changed my Browser ID (to see more free stuff from orange GRPS/Orange World) I cant get the colored page of Yahoo Too.
Can you post here youre Browser ID please?
To see youre browser ID string, Visit http://www.showip.com on youre PPC, and let me know please.
Cheers
I just bought an XDA2i and am having the same problem with the mobile Yahoo site. Since nobody has managed to unlock the extended ROM in XDA2i yet , I cannot remove the O2 stuff that is causing the problem (forcing a different connection for web adresses starting with "wap"). On my XDA2 i could unlock the extended ROM and remove the O2 bits, and this solved the problem. With XDA2i I'm stuck...
Dear all,
I have manage to login via OWA to my exchange server and now I want to disable the auto login (since I have save my password the first time I login). I tried clearing the internet temporary file and cookies but it still logs me in automatically. My Question, how do I disable this? Thanks.
Regards,
Kueh
Same prob months ago...
No solution a part of hard resetting
Rups
p.s. Wrote a few thing if you solve problem..
Tried changing the account password on the server to see if you get prompted on next login?
Cheers,
Martin
My company runs an exchange server that i can connect to via SLL on the web. However, I always got an invalid certificate message. On 2003 devices on ran certchk and i could synschronize my mail, calender and contacts.
Now - with my JJ - i can not get to my mail anymore because of this invalid certificate. I does not help to download the certificate to my device, since it is invalid.
Is there any reg hack, apps or whatever i can use to overcome this?
Thx
Ronaldovic,
Try exporting the root certificate from the Certificate Authority in "DER" format, copy it to the JJ and run it. This should work as the JJ is not certificate locked.
Ferg.
I did - and when i look in settings-certificates - it shows in the list of certificate but with an enddate of somewhere in 2003 (so it is not valid).
Again, with certchk in 2003 devices it all worked flawlessly.
Are the certificates still be the problem now? Or is it something else?
When i sync, i get an error: 0x80072F17
Ah sorry, I read your mail but didn't really read it and assumed I knew what you were saying.
If you can get a reg editor for the JJ (I use something called "Mobile Registry Editor" which is a PC-based app and works through ActiveSync), change DWORD Value under HKCU\Software\Microsoft\Activesync\Partners\[Secure] to 0 I gather this will do it.
On the point of the certi though, can you not get the CA to issue a new certificate to the Exch box? When connecting through SSL, ActiveSync doesn;t give you a "Yeah connect, I don't care!" dialog box as OWA does.
Ferg.
got a good reg editor, but can not find the last [secure] part...what do u mean by that? For example below ..\partners i see two entries(default) and (ServerNameChanged). and two directories with strange numbers.
About the certificate thing...if i understand u correctly i will never connect if i do not have a valid certificate?
I appreciate the help!!
YEAH!!! Great, got it working, thx to u!
I just love this forum.
Glad to hear it!
I am back....
The sync goes ok now, but every time i send a new mail, it gets send twice. In my outbox on the JJ there is one email, when i receive i see two coming in (exactly the same)
Any1?
i can get it to look like its working by turning off ssl. e.g. it says sycing 20/20 emails. However when i go to messages there are none there! Similarily contacts, tasks and calendar items appear to be syncing in active sync, but they just dont show up!
Hi,
I have run into the same problem.
Used the tips on changing the registry (for which I really thank you!!!).
However, it seemed working until I realize that my Treo 700w keeps asking for the password. No matter how many times I enter my password correctly, it just keeps asking the password over and over again. It does not save my password even if I select "save password" option.
Have you run into this problem and found any workaround?
Thanks in advance. Bo.
Boryu,
Remove and re-add the server source.
I've had this a few times and it's well annoying! This seems to do the trick though.
Ferg.
same issue
i have the same issue,
i used registry editor but its not allowing me to add the reg key!!
am i doing something wrong,, and were do i add the Secure Dword?
Why don't you just renew the certificate? Just right click the website folder within IIS 6.0 and select Properties. There is a security tab (Directory Security?) within which you can renew an existing certificate.
I had the same problem getting push email to work, and renewing the certificate fixed the problem.
Why don't you just renew the certificate? Just right click the website folder within IIS 6.0 and select Properties. There is a security tab (Directory Security?) within which you can renew an existing certificate.
I had the same problem getting push email to work, and renewing the certificate fixed the problem.
ronaldovic said:
got a good reg editor, but can not find the last [secure] part...what do u mean by that? For example below ..\partners i see two entries(default) and (ServerNameChanged). and two directories with strange numbers.
About the certificate thing...if i understand u correctly i will never connect if i do not have a valid certificate?
I appreciate the help!!
Click to expand...
Click to collapse
Hi i see exactly the same, but wich value do i have to change ??
please help
thanks in advance
I try to get my mails pushed to my TyTN. Thus I enabled the appropriate services on my Exchange 2003 SP2 server, set the user permissioning and so on. I generated an P12 cert with my CA and imported it using p12import.exe on my tytn. I also installed .cer for the domain and for the CA on the mobile device. Thus I was able to sync and push. Now I am facing the following issue:
After successfully syncronizing and pushing for some hours, I regularely get an 0x85030027. Checking my certificate I can see that my p12 is gone. After reimporting it using p12import, i can change the server settings the following way to force an "reinitialisation" of the link between user settings and cert: I delete the "m" in "blabla.dynaccess.com", go forward to login information - the password is gone then - go back to the server, add the "m", go forward adding the password. Sometimes I am than able to sync again, sometimes I get an 0x85010004. In the latter case I must delete the whole server setting - loosing all my mails - and have set it once again.
Dealing with this issue now for several days and beeing unable to find any description or solution in this forum and the web, I kindly ask for any idea which could be considered beeing helpful...
PS.: Sorry for my English - it is not my native tongue ;-)
I use CACert certificate for my email and have imported it using smartphoneaddcert utiltity from Micro$oft.
Copy your certificate into \Storage\root.cer (has to be named like this) and run SPAddCert.exe, hopefully that should work
thanks for the immediate answer. i already installed my root-certificate with no probs. The issue I have is related to the individual cert for the device, generated and signed by my ca, which is trusted by the tytn. This individual one disappears after some syncs?!
I don't experience the same problem ...
I think your method is ok (Jacco in DDSL.NL) have a nice tools to import personal certificate to device...
You may also look : http://www.httpsync.net
Cheers
André
Now I can describe the problem more precise: the personal certificate disappears after every soft reset?!
I have the exact same problem !!!!
When you do a soft reset the personal Certificate disappears.
I can reimport it directly, but I need to hook it up to a PC in order to validate the Certificate.
Is there no other way. This is really annoying when i'm on a trip, and I have to soft reset the device.
Does anyone know hpw this can be done differently.
Thanks
Micman
Hello,
I've just flashed the WP7-ROM for the HD2... everythings works fine till now, but I cannot connect with Exchange (there is a problem with the certificate).
But my HD7 works fine with the same Certificate... has anyone the same problem... or has anyone get exchange working?
I'm having this problem also. Does anyone have solution for this?
Mine works fine..
Checkout the time of the phone.
funky81 said:
I'm having this problem also. Does anyone have solution for this?
Click to expand...
Click to collapse
Shutdown und restart the phone... after that it works on my hd2
TMo US 3G Not working on HD2 after WP7
Hi Everyone,
I have just flashed my htc hd2 with WP7 rom.
Things are looking good.. the only problem is my tmobile 3g/data connection is not working. Can anyone help me here ?
rdashora said:
Hi Everyone,
I have just flashed my htc hd2 with WP7 rom.
Things are looking good.. the only problem is my tmobile 3g/data connection is not working. Can anyone help me here ?
Click to expand...
Click to collapse
Hi rdashora, under settings, Cellular you need to edit and enter the APN for for your service provider. You may need to search online for the correct string.
Exchange worked fine on my end...i must say that this has to be the best exchange capable Os out there. My work emails render as faithfully as they do on my desktop
Thanks, it works
rdashora said:
Hi Everyone,
I have just flashed my htc hd2 with WP7 rom.
Things are looking good.. the only problem is my tmobile 3g/data connection is not working. Can anyone help me here ?
Click to expand...
Click to collapse
Why have you posted this question in this thread?
Unfortunately, unlike iOS and Android, WP7, like WinMo before it, still does not accept unsigned certificates.
With iOS and Android, you can choose to accept te unsigned cert after viewing a warning. Microsoft still don't allow this.
To get it working you have to setup an email account that works (gmail/hotmail) and email yourself the root certificate for the exchange domain. You can then install on the device from the email. After that, you can now attach to you Exchange server.
It's a bit of a hassle and one that there's really no reason not to support along with the appropriate warnings.
worked data connection
The answer was given,
Enter cellular menu. there, add "APN" option is available. Enter here your own countrymen, the GSM operator information...
I worked very well. but too bad the app to be paid.
I still say android2.3 much better operating system.
Hello:
i have another problem related to exchange the user name name of my account has two word as "name surname". When I tried to configurate my excahnge account I cannot introduce any space on the username field.
Does anybody know any trick to solve the problem?
Any registry key to change where user name is stored? As know the automatic system of WP7 detected my username as the first part of my e-mail address (ex. [email protected] the user name detected is name.surname instead of name surname)
Any trick to force the keyboard to write spaces?
If I do not find a solution I will have to come back to 6.5 as I need my HD2 for work.
thanks in advance for your help.
romperstomper said:
Unfortunately, unlike iOS and Android, WP7, like WinMo before it, still does not accept unsigned certificates.
With iOS and Android, you can choose to accept te unsigned cert after viewing a warning. Microsoft still don't allow this.
To get it working you have to setup an email account that works (gmail/hotmail) and email yourself the root certificate for the exchange domain. You can then install on the device from the email. After that, you can now attach to you Exchange server.
It's a bit of a hassle and one that there's really no reason not to support along with the appropriate warnings.
Click to expand...
Click to collapse
lol, whats all that about, most people set up their exchange email etc with no problems what so ever, i didnt?
kata said:
Hello:
i have another problem related to exchange the user name name of my account has two word as "name surname". When I tried to configurate my excahnge account I cannot introduce any space on the username field.
Does anybody know any trick to solve the problem?
Any registry key to change where user name is stored? As know the automatic system of WP7 detected my username as the first part of my e-mail address (ex. [email protected] the user name detected is name.surname instead of name surname)
Any trick to force the keyboard to write spaces?
If I do not find a solution I will have to come back to 6.5 as I need my HD2 for work.
thanks in advance for your help.
Click to expand...
Click to collapse
That is weird, you say ur username has a space in it? I didnt think that was possible??? I would contact ur IT dept on that one.
Yes, my user name has a space in it. but not just mine also all the rest of my organization. Everybody gets the user name as 'name surname'. I already contact IT department and they told me they will not change nothing for security policy.
I have had 5 windows mobile phone, 3 androids and several symbian and I never got any problem, it was always possible to wirte my user name with the space. :-(
Hi, I'm having the same problem now. I was running either BOYPPCs or HD2Os (i can't remember) NODO rom and I could sync with my companies exchange no problems. However I installed the mango beta yesterday and now I have a certificate error, I tried going back to XBMODs nodo rom and it didn't work either. I know all these roms come from the same base, but could there be different certificates floating around?