This is my first posting so please humor me. During this step "3 - Execute the EnableRapi.cab in your phone. Wait for it to finish", my Cingular 8125 crashed. If I turn it on with a sim card, I will get this error: "Data Crahes" "Please contact your service center." This is a white screen that cannot be closed.
1- Did this happen because I forgot to remove my sim card while unlocking?
2- How do I fix it (any link would be helpful)?
I have tried hard resetting to no avail. It boots fine without a sim card.
Thanks in advance for helping me.
Please Help
Have I posted this topic in the wrong forum?
Any assistance would be greatly appreciated.
Hi superman. Problem has occured because it crashed, not the sim. (although many do remove it when they do it) Try attaching the device via activesync and running lokwiz.bat from pc desktop and see if you can superunlock it. If not take sim out and try running enablerapi.cab again and then lokwiz.bat. Good luck
Still Looking For Solution
Sorry, to keep bringing this up. meschle, Thanks for your suggestions. Unfortunately, I am still experiencing the same problem. Any other ideas are welcomed.
Re: Still Looking For Solution
superman said:
Sorry, to keep bringing this up. meschle, Thanks for your suggestions. Unfortunately, I am still experiencing the same problem. Any other ideas are welcomed.
Click to expand...
Click to collapse
What ROM is now installed on it?
You could reflash to the shipping ROM which is on the ftp, then run through the unlocking process again.
Or, just grab the 2.17 upgrader I created and flash directly to it. Most folks report that it flashes fine without first CID unlocking.
BTW, for issues such as this, you'd be better off posting in the Wizard Upgrading forum. You'd also find this issue has been encountered and resolved several times.
Summiter,
I will try your solution. I am glad I found this site. Thanks again to everyone.
Related
I have an XDA II that will not boot, simply shows "Serial, v 1.06". Went through various processes to get this far, and strangely I still get country ID errors when i try to load another version of windows mobile on it. can anyone help?
I had a simular problem with my IIi untill i removed the sim card and tried to updat without it installed, it worked for me, hope this might help.
I had a simular problem with my IIi untill i removed the sim card and tried to updat without it installed, it worked for me, hope this might help.
I unfortunately did it in the first place without a SIM card installed... anyone else have any ideas?
Thanks though!
Morning all,
I need help please gents, last night I attempted to sim unlock my MDA Vario (tmob), I used lokiwiz ver 2, but now it is simlocked completely, it also reads on start up "data crashes, contact service provider". Was working flawlessly on Tmobile before this.
I'm sure its a gen 3 as the ipl/spl is 1.06, I have tried using the new version of lokiwiz to fix it but it will not go away (unless I take sim out of course! )
In my desperation to get it fixed last night I even paid £20 to imei-check.co.uk, but they need to verify that I am who i say I am?! By sending a scan of a bill? At this point I have not received any contact from them.
Can someone please help me get this to accept sims again, any help will be much appreciated .
Thanks in advance guys.
Andy
Try once more to downgrade your phone to the 1.05_CUSTOM_ROM, then use lokiwiz02b and perform the SIM unlock again STEP-BY-STEP without having your SIM card in there! See if that works!
Thanks Junner, will try when I get home from work.
Should I have taken out sim before attempting unlock intially?
Thanks
Andy
No, it normally does not effect the unlocking process!
What I do wonder is the following: Do you use a different SIM than the phone's ROM was made for? It is highly unusual that the SIM lock will effect the card it was originally locked to!
here is the problem similar to yours
http://forum.xda-developers.com/showthread.php?t=258739&page=3
i got it solved by paying 38$ using
http://www.imei-check.co.uk
Thanks all for all your help,
I tried again but it does not work, I guess I will have to wait for imei-check to get back to me, unless anyone else has any other suggestions?
Thanks again all
Andy
Hi all,
I recently took out my sim card to replace it with a new one. However, when i placed the new one in and turned the BA on i recieved no signal, furthermore, when i put the passcode in, it said it was wrong. of course, I have punched in the right code i have always been using.
i have tired hard reseting but it still doesnt work.
Are there any other options avaliable apart from flashing a rom in again?
Any help or suggestion will be appriciated.
Kind regards,
Jason
some help would be appriciated
jasonchiu said:
Hi all,
I recently took out my sim card to replace it with a new one. However, when i placed the new one in and turned the BA on i recieved no signal, furthermore, when i put the passcode in, it said it was wrong. of course, I have punched in the right code i have always been using.
i have tired hard reseting but it still doesnt work.
Are there any other options avaliable apart from flashing a rom in again?
Any help or suggestion will be appriciated.
Kind regards,
Jason
Click to expand...
Click to collapse
These are both known glitches in the BA with WM6
For the no signal a soft-reset should fix it, for some reason if you remove the battery and then replace, the first boot has no radio initialization, but a soft-reset after that fixes it.
As for the passcode, you have to clean your hive file to regain access to the device. You do not need to format storage, but all your registry settings for installed software will be gone. Most likely a re-install of each app will be needed.
i just went through this..i tried changing my sim card and i was freaked when i saw no radio rom installed..then i upgraded to radio 1.15 and first it worked but again i t showed the same so i went into bootloader an then soft-reset and its working till then ( about 5 softresets till now)
cheers guys, will try that out.
I have been using my T-Mobile MDA for more than 3 years, and suddenly it decided not to work on O2 anymore.
I have tried the sim in a different phone and it works.
When I try a T-mobile sim or a Virgin sim in the MDA, it works.
It won't recognize any other networks for some reason.
I have re-flashed the ROM, but still no joy.
What I've come to notice is that the IMEI number shown on the screen when you press: *#06* is different to the number printed at the back of the phone.
Could it be that T-Mobile UK are playing games, and want us to go to them to unlock our phones???
I would be very grateful to you guys if you could please help me unlock the phone again.
P.S: I have tried to use Xdadev_all_unlock, and that says "phone unlocked", but still no joy.
It seems you now have 2 IMEI numbers registered on the same network.
The IMEI number you are using, may also be 'barred/banned', for whatever reason.
You need to search the forum for the tool to change your IMEI to whats on the sticker under your battery.
Hi there Nokia3650,
thanks for your reply.
I have tried to search for the tool to change the IMEI, but couldn't find it.
Could anyone with the info on this tool please help?
Your help will be most appreciated,
Thanks,
Jas.
Vlodec, will have the best soloution to getting the IMEI changed.
I think the tool currently being used is 'loki unlocker'.
hiya Nokia 3650, thanks once again for the message.
Where would I find the tool? I have looked all over the place, but still no luck.
Do you have a copy that you could forward to me?
Hope to hear from you soon.
Kind Regards,
Jas
Jassy29, I don't have it stored on my HD, but I'll post the URL from the downloads section when I find it.
As I recal, its actualy in the charmer threads (should still be compatible, as its just a DOS batch file).
This is what you need:
http://forum.xda-developers.com/showthread.php?t=249474
Hi Nokia 3650,
Thanks for your reply, and concern. I just tried the program/software you suggested, but no luck.
It seems to some up with an error message, and resets my phone, but nothing else.
Do you know of any other software?
Would it help if I could change the IMEI back to the original? (I'll have to figure out how to do this).
Thanks again,
Jas
Still waiting for some help????
Hi people,
Is there no one out there that can help me out on this one?
I have tried to look for software to change the IMEI on the phone, back to what it was, but have had no luck.
I would be very grateful to anyone out there that can help me out on this one please please????
Regards,
Jas
HELLO???? Anyone out there capable of helping me?
I need to unlock this phone.
Why isn't anyone replying?????????
Hello people,
Havnt been here for some time. Iv got problems flashing my spv m700. I have flashed this device dozens of times with no problem, but today tried flashing new rom and it gets stuck on 0%. checked the normal things like battery seems ok but the same problem persists.
Also iv tried flashing via sd card. Gets to 1% then bums out saying Update terminate update fail with error code at top of screen sayng 00018003.
Please could someone help me as i use this for work. Best device iv used for tomtom
Many Thanks for your help in advance.
Ant
moderator,
Please close thread. problem is now sorted. used mitty with xp exploit to sort issue out.
Ant