SanDisk 2GB problem... - PDA2, XDA IIi, 2020i Software Upgrading

Hello...
First off, I recently purchased a Sandisk 2GB SD from my friend who bought it from China. I checked the memory beforehand and it registered 1.939GB.
Here's an outline of what happened:
1. Tried to backup original ROM using romupdate.exe
Also, I followed instructions based on this link:
http://en.pdamobiz.com/en/forum/PDAforum_posts.asp?TID=370&PN=1
Instructions VS pictures were a little different but I used the instructions anyway.
2. Tried copying backed up ROM to HD but came up with a 0kb file. I used the ntrw.exe to copy the backup ROM.
3. Proceeded to install Asian ROM with camera fix from ftp here.
4. Placed Sandisk 2GB SD into Alpine and was asked to format it. I had it formatted.
5. Checked my memory and found out it was not anymore 1.939GB but was 970MB ONLY!!!
6. Tried formatting in desktop then digicam, but it still displayed 970MB. BTW, desktop formatting did not finish due to unknown errors.
Even in other devices, the SD now only reads 970MB, not the 1.939GB
7. Went to Sandisk website and checked recommendations for XDA IIi SD card.
There was a warning stating that XDA IIi (Alpine) was compatible upto 1GB only and recommended the 1GB SD.
Is this true? I have checked before this and IT DID REGISTER almost 2GB of storage capacity.
Has the romupdate.exe got something to do with it? If so, is it possible to return it to 2GB of capacity?
I'm kinda desperate and am hoping someone out there has an explanation and possible solution to get the 2GB capacity back.

Related

How I fixed my 2GB miniSD problems

Today I received my 2GB Sandisk miniSD card from eCost (they sell it for real cheap so I thought I get one). I formatted it with XP (using its supplied SD placeholder) to FAT32. After I placed it on the PDA it reported the following crazy results:
2 GB storage
960 MB used
970 MBs free
In other words, my Wizard (running the latest AKU2 QTek ROM from ~March 22 2006) sees the full 2GB, but can only use 1 GB!!!
I then tried to format it with XP using FAT16, but the SAME problem occured.
Thankfully, I downloaded this utility: http://pocketgear.com/software_detail.asp?id=3191 and I did a "repair" (or format) the miniSD via the PocketPC. THIS utility saved the day! It fromatted the miniSD card correctly! And now I can see and use ALL of the card.
Please note that the problem/bug might not be with XP or the PPC. It might be with the actual SD placeholder, or even the flash reader (hardware bugs). The point is, that somewhere along the way something gets screwed during the formatting. So, if you buy a miniSD 2GB and you get such or other problems, download the StorageTools utility linked above to format (or use "repair") the miniSD card directly in the PocketPC instead of using XP and a SD-placeholder/flash-reader.
BTW, I also posted a review of the QTek 9100 yesterday: http://tuxtops.com/node/749
wow! I'm reading your post and thinking I wrote it! I had the EXACT same problem. I tried another utility (that made my miniSD card unrecognizable to my kjam).....a quick format with my pc, and I was back to only about 1gb of usable space....then i stumbled across storage tools. I ran the repair, and it was fixed! ahhhhh 2gb of space....woohoo!
Same problem, diffrent solution...
I also had the same problem, but found another solution, after trying to reformat, both in ppc and pc and cardreader in printer, card was unreadable by all devices. Therefore, as a last resort, I put the card in my digital camera (nikon s2) wich recogniced the card as unformatted and kindly asked if I would like to format it... after that it worked perfectly
help!!
i got the same problem with my 2G sd card..
i formatted with my PC and now it show only 975mb in my card!!!!!!!!!
i had try to use the StorageTools to repair it via my XDA mini s.. but it still show 975MB.... any idea???
After you used StorageTools to repair the miniSD card, you need to do a soft reset for the PocketPC to recognize the rest of the card.
However, I must tell you, the only clear deal is to FORMAT the card WITH StorageTools and NOT to simply just do a repair.
Hey I have this same problem, but the link to the program is no longer any good. Does anyone know what the name of the application was.
Thanks,
Bought new card
OK- Now I do not know what to do. I just went out and bought a new 2GB scan Disk MiniSD card. When I went to install my data on it, I can only get 1GB on the card. I need 2 GB. Does anyone have any ideas on how to fix this. I thought the last card was bad, but I guess not. This happens on 8125 and in Windows. Both see the card as 2 GB but will error out when you try to add more than 1 GB.
Please help.
Thanks,
The name is that one: storagetools...
I had the same problem and using just the evaluation version of the program was good enough to format mi sd and everything it's ok!
http://storagetools.softonic.com/pocketpc
what is a better format for MiniSD 1G (prob:read/writes slow)
I have a problem with my miniSD card reading and writing WAY too slow.
I think that may have happened when I formated the card as FAT32 partition instead of FAT. This thread seems like it is a helpfull answer, but which would read and write better? Does anyone know?
Thanx in advance.

Memory card

Hi!
Just got my first memory card ever - put it in but can't see or access it, not appearing in storage device.
its an 8gb mini used through an mini s adapter..
please help!!
Hi.
I had simillar problem with my card. Wizard is not like the other phones, it can't read cards which are damaged or not formatted. Obviously, yours is not damaged. Simply just access the card through your PC, format it, insert the card into the wizard (you will see no change at all so far), reset your phone and after windows mobile loads, it will ask you if you want to fomat the card - yes, format it. And there you go, you have yourself a storage device
Hope it works.
P.S.
There's also one other option, your card is too big to be handled by your device.
but it seems to be formatted
Hi. seems its formatted, although I did not format it.
I Put it into (vista) computer and it just worked. When I did a "show properties" on the card it was FAT 32 formatted.
Is there a Max limit to the size of card?
8gig mini or micro?
If it is a 8 gig micro your phone will not read it. Sorry will only ready mini sd's
not micros or mini sdhc.
even...
Hi!
even though I'm using a MicroSD adapter??
thanx
On my wiz, my card is running FatFS , not Fat32. It could make the difference, i am not sure. Since you are in a zero position, you have nothing to lose with one more format, so just format the card in your pc and restart your wizard with the card inserted. If this doesn't help, then greasemuntney is prolly right and you can't use this card.
fatfs
Hi so right
Whats FatFS??
thanx
as mentioned above the wizard does not support SDHC standard and your 8GB happens to be SDHC.
http://en.wikipedia.org/wiki/SD_Memory_Card
awwwwwwwwwww c rap
damn... so is there a firmware upgrade? or something that I can do to upgrade the phone to use sdhc??
I got this card as a present so can't swap it?
Nope, you're bagged. Phone cannot read SDHC, no matter what kind of adapters, ROMs or firmware you attempt to employ. Try selling the chip on Craigslist and use the money to buy a bunch of 2GB cards.
SDHC
ok before a final verdict that wizard wouldn't read an sd that is in sdhc format (fat32 reliant) do note that i had the same problem but googled to find two solutions that didn't work alone yet combined did !
first of all you need to change the latency of the card read in registray as follows:
[HKLM\System\StorageManager]
“PNPUnloadDelay“=dword:8196
[HKLM\System\StorageManager]
“PNPWaitIODelay“=dword:8196
Note that the 8196 should be entered as a DECIMAL value. The HEXADECIMAL (HEX) equivalent is 0×00002004.
now attached are two sdhc drivers that require (acording to uploader) to be installed cab file first for registry tweaks and then replace both files installed in windows directory with others included in driver bundle. (through instruction guide in a txt file is included within zip file)
finally reboot , yet as a disclamer do note the following your device will not be backward compatible with regular sds . (not untill you hard reset it so it would restore original dlls and setting)
Interesting. If this works for anyone besides night-mayor, please post your hardware(G3/G4)/IPL/SPL...tracking successes and failures with this method will be valuable to other users.
In fact, you can only use standard SD cards (mini or micro with mini adapter) and the maximum capacity for standard SD protocol is 4GB, but it's difficult to find 4GB Standard SD cards (micor or mini).
Most of manufacturer actually sells HC card for 4GB size, and on web stores, it's often not very precise about HC or none HC.
Good luck...
List of working 4GB Mini SD cards.
If it ain't here, it ain't working, generally speaking (it is not comprehensive). As you can see, they do make 4GB cards that aren't using the HC configuration, but they are rare. One of the replies on the thread I linked to above even mentions an 8GB kit, but it did not work.

[Q] Micro SD card in Desire Z

Hi,
Received Desire Z with 8GB card pre-installed already. Then I bought 32GB microSD card.
Question is about changing 8 to 32GB. If I transfer all the files into the new memory card will I need to re-install all the apps etc or it will work fine?
Does anyone have any knowledge or experience on this field?
Regards
Filippoz
I'm interesting in finding this out too. I've got a 16GB Class 2 card atm, as well as an 8GB Class 4, but that's not nearly enough. Was looking at a 32GB Class 6 online for about £70.
filipoz, where did you get yours, what class is it and how much did it cost?
Here is what I did:
- shutdown phone
-take 8GB card out
-copy all contents of old 8GB to a folder on PC.
-copy all contents from folder on PC onto new card
-put new card in
-turn phone on
I did not have to reinstall anything.
I'm pretty sure most if not all apps are stored on the internal memory.
So I have made a test and it is 5.8 - 6.0 MB/s file transfer (360mb file was transferred in 62 seconds into the memory card).
It cost me 130zł which is about 29 pounds including delivery.
Bought it on Allegro.pl which is similar to eBay.
edit: not everything went well with moving into the new card.
example 1: footsteps: Unable to find location files on your storage card. Tap to download the files from the server.
example 2: one of the games is gone ...
edit 2: so I am back with the old card 8GB, need to find out how to transfer it in a proper manner.

Class UHS I/class 10 micro sd compatibility.

Hello,
I've recently bought a Sandisk micro sd 32Gb class 10 for my HD2. The exact model is SDSDQU-032G-U46A.
I installed a rom via Native Sd method and everything ok until a couple of hours or so, and the phone hangs up. I had to pull of the battery and reboot. And then the same problem again. I released the micro sd and put in into the pc. To my surprise, the system ask me to format it
I reformatted it to fat32 but the issue is still there. I tried formatting the card with Sdformater, with minitool partition wizard, and other tools but everytime the same problem.
So finally, I thought it was a card failure and decided to ask for a refund. I received a new card, same model, and to my disappointment the new one was worse than the other one. I couldn't even install the rom, with a lot of partition errors. So I believe that there is a compatibility problem.
Anyone who has tried this card model can tell me his experience? What do you think, is it really a compatibility issue or I had bad luck?
Thank you for any help.
There is another guy having some problems with the sandisk class 10 32GB. He changed the sd, and everything worked flawlessly.
I'm not saying the sdcard is the problem, I'm saying that class 10 32GB is too good.
(Btw, I'm using the same class 10 ultra-sandisk but 16gb, and I never had a reboot on nativesd)
pepemonje said:
Hello,
I've recently bought a Sandisk micro sd 32Gb class 10 for my HD2. The exact model is SDSDQU-032G-U46A.
I installed a rom via Native Sd method and everything ok until a couple of hours or so, and the phone hangs up. I had to pull of the battery and reboot. And then the same problem again. I released the micro sd and put in into the pc. To my surprise, the system ask me to format it
I reformatted it to fat32 but the issue is still there. I tried formatting the card with Sdformater, with minitool partition wizard, and other tools but everytime the same problem.
So finally, I thought it was a card failure and decided to ask for a refund. I received a new card, same model, and to my disappointment the new one was worse than the other one. I couldn't even install the rom, with a lot of partition errors. So I believe that there is a compatibility problem.
Anyone who has tried this card model can tell me his experience? What do you think, is it really a compatibility issue or I had bad luck?
Thank you for any help.
Click to expand...
Click to collapse
Hey I think I am using the same card as yours. The model number is SDSDQUA-032G-U46A. My card is working flawlessly. I have installed both Windows Phone 7 and Boxmax ROM . The SD card has 4 partitions. However, I do have issues with my phone, but it is not related to SD card. I bought the phone one month back from eBay. Well, I was unlucky and from the first day the phone has thermal problems, which has been discussed here http://forum.xda-developers.com/showthread.php?t=982454
The seller probably sent me a refurbished piece. The phone hangs whenever I do something cpu intensive. So just a thought. Are you sure that it is problem with SD card? Or may be you can try some other ROM.
I'm pretty sure that it is the micro sd. I installed 3 different roms, all with the same result. I have tried same roms in other card and perfect.
Searching on the web I found this site http://www.sandiskcards.com/ where you can see which card is compatible with any devices. Regarding the HD2, it supports up to 32GB class 4 Sandisk micro sd. So I suppose that it's a compatiblity problem and there is nothing I can do about it.
However, there is people using a class 10 ultra-sandisk without issues at all. I'm confused.
Other who can share their experience?
Thanks.
Hey pepemonje,
did you ever try to fix permissions from within the android you are running? I had similar problems (programs being terminated and more) and tried to fix permissions from 4EXT and clockwork, but that didn't help. After fixing permissions with "NativeSDMultiboot" - "Tools" -> "Fix Permissions" those problems were mostly gone.
I'm not sure if that helps, its just a guess.
Regards
pepemonje said:
Hello,
I've recently bought a Sandisk micro sd 32Gb class 10 for my HD2. The exact model is SDSDQU-032G-U46A.
I installed a rom via Native Sd method and everything ok until a couple of hours or so, and the phone hangs up. I had to pull of the battery and reboot. And then the same problem again. I released the micro sd and put in into the pc. To my surprise, the system ask me to format it
I reformatted it to fat32 but the issue is still there. I tried formatting the card with Sdformater, with minitool partition wizard, and other tools but everytime the same problem.
So finally, I thought it was a card failure and decided to ask for a refund. I received a new card, same model, and to my disappointment the new one was worse than the other one. I couldn't even install the rom, with a lot of partition errors. So I believe that there is a compatibility problem.
Anyone who has tried this card model can tell me his experience? What do you think, is it really a compatibility issue or I had bad luck?
Thank you for any help.
Click to expand...
Click to collapse
There are reports that NativeSD roms are not working very well with the SD card formatted via the mini tool. I myself encountered your issue. There are lots of FC and hangs up. I corrected this by simply performing a full wipe of data data/factory reset via the recovery. This will wipe out your data and format your Nand cache, SD Card Ext4 partition and linux swap if any in your SD, but will not touch your FAT32 windows partition and will remain intact. After that perform a fresh install and you should be good.

[Q] Weird MicroSd issue

Hello world,
I'll try to make it as short and accurate as possible. I have an S5 SM-G900F and until recently I was using a 32 GB micro sd card (formated in Fat32) that i had on my S2.
A while back the card just unmounted and died (i tested in another phones + on 2 pcs through card reader).
1st i bought a 64 GB card on ebay (a cheap one) and when receiving it I had 2 issues: the card was slow to read/write and no matter what method was used and how many files were transfered, after a reboot it would only display the first +/- 7.5 GB. The remaining folders remained, but with no files in them. I thought the card was defective and got myself a new one but went for a 128GB this time Read/write speed were correct but i still had this +/- 7.5 gb limit on it. I do not have any phones to test this time, due to the capacity, but on several computers, the size of the microsd card was correct and when connected through USB OTG when i had more that 10gb files on it, they displayed and played just fine (movies and music). It appears that the phone just "deletes" files going over the 7.5 GB threshold. I used the following methods to copy files to the card:
1. USB cable and MTP.
2. Card reader
3. Over wifi using ES File Manager
I thought that maybe the stock kitkat rom i had was the problem so i upgraded to a stock lollipop 5.0 (spanish one) but i have the same issue. I even tried unrooting the phone.
Has anyone ever encountered this kind of issue? Does anyone have any suggestion to try resolving this?
Feeling desperate here
can anybody help? please
murpheus said:
Hello world,
I'll try to make it as short and accurate as possible. I have an S5 SM-G900F and until recently I was using a 32 GB micro sd card (formated in Fat32) that i had on my
..........
Has anyone ever encountered this kind of issue? Does anyone have any suggestion to try resolving this?
Feeling desperate here
Click to expand...
Click to collapse
Hi :good:,
Sorry to hear that you are faced with a Defective SD Card. Stop buying from ebay as the sellers most of the times are not authentic and the electronic products you buy will be fake from inside but looks absolutely genuine from outside.
Currently ONLY 'SanDisk' and 'Samsung' produces 128GB mmc card.
Try to reformat the Card as Full Format in Windows and check if it works.
if not then Delete the Card partition from Windows. Put it in the phone and it will be identified as Damaged Card. Go ahead with clicking the message and the Phone will Auto Partition and Auto Format the card.
If its still not working... then you are married with a Damaged Card.
Check if you are accessing the SD Card Folder over WiFi not the Phone internal memory Folder which is anyways will be much lesser. KitKat do not allow accessing the SD Card to 3rd Party Apps but there are few tricks here in XDA (search for it) which will overcome that.
Happy Troubleshooting.

Categories

Resources