I need a dial tools which can add a prefix automatically. Thanks a lot!
try using pocket informant.... it has this option.
Related
Hi all!
Ok, I try it here...
Can anyone tell me, how to enter the PIN of the SIMCard to unlock my Blue Angle in C# or C++?
I would like to create a GPRS connection to the internet and have to enter the PIN first.
A code example would be nice.
Thank You
ENTER PINCODE
if your using AT commands
i think the command to enter pin code is AT+CPIN
i'm using Vb6 but i think it is somewhat similar
Mscomm1.output = "AT+CPIN="XXXX"
XXXX is the pin code hope this helps
Thanks for Your answer!
But I already tried this.
To send an AT Command to the modem, I have to open the Com Port COM2. I also have to send the DeviceIoControl command. All AT-Commands return success, even the CPIN command, but nothing happens. If I want to connect to the net, the dialog appears to enter the PIN.
Thanks for Your help.
Thanks for Your answer!
But I already tried this.
To send an AT Command to the modem, I have to open the Com Port COM2. I also have to send the DeviceIoControl command. All AT-Commands return success, even the CPIN command, but nothing happens. If I want to connect to the net, the dialog appears to enter the PIN.
Thanks for Your help.
Hi,
Have you tried to execute the "SimUnlockPhone" API in you app?
I don't know if this works but you can give it a try...
Regards.
Dear All,
I want to have the dialing and contact manager of the wm6 to be installed on wm5 , i tried to take the contact manager from faria wizard but i wasn't able to configure it specially the (file as) option
Hi All,
I have been looking for a tool that closes all open programs. I do not want a new task maneger but just an exe file that does the job.
I want to map this exe file in winsbar desktop to close all open programs. It should be just one press, no multiple actions.
Can anyone help me out?
Thanx Robert
After searching I have found:
Tascal Close All.
But it leaves Activisync running. Any other suggestions??
You could probably do this with Mortscript.
activesync cannot be closed while your device is connected via usb to your desktop.
you can try this prog. it works perfectly.
run the tool with the following parameter:
Code:
RegistrySetString.exe 4
egoist6 said:
activesync cannot be closed while your device is connected via usb to your desktop.
you can try this prog. it works perfectly.
run the tool with the following parameter:
Code:
RegistrySetString.exe 4
Click to expand...
Click to collapse
Hi,
Thanx for the advise, but when I try to run it, I get an error message saying that it is not comeplet. How do you run it?
Did you create a shortcut or did you do it in another way??
RobertdeHoop said:
Hi,
Thanx for the advise, but when I try to run it, I get an error message saying that it is not comeplet. How do you run it?
Did you create a shortcut or did you do it in another way??
Click to expand...
Click to collapse
you need to put that into a shortcut.
..#"\path\registrysetstring.exe" 4
replace .. by amount of letters incl. quotes (just in caser you're not familiar).
I am pretty sure Oxios Closeapps will do what you want, free download from here http://www.oxios.com/memory/
Thanks, but this shows the dialog box, which is an extra action. I am looking for a non visible application.
How to "attach" USB Tool and activate "Internet Sharing" automatically at startup ?
I "liberated" my XP downgraded HTC Shift and succesfully tested 3G connectivity.
The problem is that every time I restart the device, I have to:
1) enter WM
2) Attach device via USB Tool
3) Enable Internet sharing
As WM is an operating system, I guess how to do this automatically. Can I write a "bat" file to do these steps or do you have any advice to achieve this ?
Any help MUCh appreciated.
Regards.
joker197cinque said:
I "liberated" my XP downgraded HTC Shift and succesfully tested 3G connectivity.
The problem is that every time I restart the device, I have to:
1) enter WM
2) Attach device via USB Tool
3) Enable Internet sharing
As WM is an operating system, I guess how to do this automatically. Can I write a "bat" file to do these steps or do you have any advice to achieve this ?
Any help MUCh appreciated.
Regards.
Click to expand...
Click to collapse
go to wm -win start menu --settings--connection--ub to pc--enable advance network connectivity.
this should fix the problem, cheers
Unfortunately, it does not solve the problem.
I noticed that the only thing I have to do is to activate Internet Sharing.
How to do this at startup, automatically ? Has WinMo some autoexec file or startup folder ?
Thanks.
Up, please. I'm so near to surf only starting up my shift
Up. Up. Up. Up.
Yes I'm sure you can do all of that with Mort Script,
Good luck!
And don't forget to post your final results so other users would enjoy of that!
unapproachable2kx,
can you support me ?
Maybe you can just drop the shortcut for the application on the startup folder or maybe DotFred's TaskManager can help(http://www.dotfred.net/TaskMgr.htm).
wovens said:
Maybe you can just drop the shortcut for the application on the startup folder or maybe DotFred's TaskManager can help(http://www.dotfred.net/TaskMgr.htm).
Click to expand...
Click to collapse
WinMo has a startup folder (\windows\startup\) that you can create a shortcut for "Internet Sharing" inside, the problem is that you need a parameter with the shortcut to run the "Activate" conmmand in "Internet Sharing"; 'cause a normal shortcut will just run the app, then you'll have to press Activate manually (we want to automate that too); same thing for "USBTool". Unfortunaltely, I don't know the set of parameters for the shortcuts.
Or try looking for some advanced shortcut creation tools for WinMo, like in this list
http://en.handybyte.com/search/shortcut-mode/
Hi!
I have a flight instrument that is called Flymaster F1 - www.flymaster.net , and It connects to the PDA using the Bluetooth Port. It's possible to setup the flymaster using the hyper-terminal on PDA or PC. But my idea is to create a software that I can use in Windows Mobile that have the options and I only need to change the values, instead of have to write all the options manually.
The F1 commands manual: click here to download it
Do you have any idea how can I start to do it?