Hi ,
please help me my XDA is fell out of my hands & hit tge wall .
Now the screen is white with some other colour with orrizontal line .
the screen don't have furrows and breaches it seems intact.
Some help please.
It could be that a physical portion of the TFT screen has been cracked. That would explain the horizontal discoloration. You'll have to have the PPC opened up to see if there is any heavy damage to the display itself or if it's the plastic plate covering the display that you tap with your stylus.
Triband81 said:
It could be that a physical portion of the TFT screen has been cracked. That would explain the horizontal discoloration. You'll have to have the PPC opened up to see if there is any heavy damage to the display itself or if it's the plastic plate covering the display that you tap with your stylus.
Click to expand...
Click to collapse
Hi thank you for your reply.
i have opened ppc but i don't see anything .
the lcd of XDA is more lcd XDA II i?
Because i have 1 of this and I could exchange
What do you think?
Triband81 said:
It could be that a physical portion of the TFT screen has been cracked. That would explain the horizontal discoloration. You'll have to have the PPC opened up to see if there is any heavy damage to the display itself or if it's the plastic plate covering the display that you tap with your stylus.
Click to expand...
Click to collapse
Actually from what the o.p describes it may just be a loose connector - the scrambled picture / horizontal lines sound similar to the 'self test' lcd function on ipaqs, and they said there was no physical damage.
Richard
macxi said:
Triband81 said:
It could be that a physical portion of the TFT screen has been cracked. That would explain the horizontal discoloration. You'll have to have the PPC opened up to see if there is any heavy damage to the display itself or if it's the plastic plate covering the display that you tap with your stylus.
Click to expand...
Click to collapse
Hi thank you for your reply.
i have opened ppc but i don't see anything .
the lcd of XDA is more lcd XDA II i?
Because i have 1 of this and I could exchange
What do you think?
Click to expand...
Click to collapse
I honestly don't know since I haven't opened up my MDA II before. I can't say if the LCD displays for the XDA and XDA II are identical. If they have the same dimensions, then they probably are.
Good Luck
Related
My HD2 was developing an issue with it's screen, white patches were appearing. So I sent it off to O2 to be repaired, and while the problem has been fixed, it's been returned with a non-glass screen with no diamond shaped etching on it like I had on the original.
Anyone else had this?
what do you mean by diamond shaped etching? and is it still multitouch?
If you look closely on the HD2, the screen has fine diagonal lines etched on the glass which cross making what appears to be diamond shapes on the screen. The screen on mine isn't glass now, it's plastic and those fine lines aren't there. I was just wondering if anyone else had had a repair and had the same thing happen.
It is still mutlitouch. I'm just trying to decide if I should complain.
Pagnell said:
If you look closely on the HD2, the screen has fine diagonal lines etched on the glass which cross making what appears to be diamond shapes on the screen. The screen on mine isn't glass now, it's plastic and those fine lines aren't there. I was just wondering if anyone else had had a repair and had the same thing happen.
It is still mutlitouch. I'm just trying to decide if I should complain.
Click to expand...
Click to collapse
Are there any other notable differences? Is it more easily scratched, less transparent, more reflective, etc.?
If so, then yes, you should definitely complain.
as plastic is alot more prone to scratches, i would complain...
Pagnell said:
If you look closely on the HD2, the screen has fine diagonal lines etched on the glass which cross making what appears to be diamond shapes on the screen. The screen on mine isn't glass now, it's plastic and those fine lines aren't there. I was just wondering if anyone else had had a repair and had the same thing happen.
It is still mutlitouch. I'm just trying to decide if I should complain.
Click to expand...
Click to collapse
I understand this must be really annoying for you, but tbh I find it really interesting.
Is your new screen still capacitive? Does a normal stylus or other object still work on it? (ie. is it still resistive?)
I never realised you could get multitouch plastic screens....
i would definitely file a complain. you bought your hd2 with a glass screen and its weird that its plastic. yes there are diamond shaped etchings in the glass screen.
so all capacitive screens should be glass covered? hmm... interesting.
Pagnell said:
If you look closely on the HD2, the screen has fine diagonal lines etched on the glass which cross making what appears to be diamond shapes on the screen. The screen on mine isn't glass now, it's plastic and those fine lines aren't there. I was just wondering if anyone else had had a repair and had the same thing happen.
It is still mutlitouch. I'm just trying to decide if I should complain.
Click to expand...
Click to collapse
I had mine repaired and yes, the lines seem to be gone. I think this has to do with the improved hardware and not because its plastic.
f*ck that. complain, you bought the hd2 and you want it back the same way you bought it.
WHOA!
This is either a HUGE insight to something about the amount of screen blotches being received.
or
You are dealing with a crappy fix.
I honestly have never heard of a PLASTIC CAPACITIVE LENS!?!?!
Will this be a common resolution to HD2 shatter/blotch?
there are capacative screens with plastic face...
the samsung f480 has one either
Hmmm
pkchips said:
I understand this must be really annoying for you, but tbh I find it really interesting.
Is your new screen still capacitive? Does a normal stylus or other object still work on it? (ie. is it still resistive?)
I never realised you could get multitouch plastic screens....
Click to expand...
Click to collapse
Battle to the finish.
CyberSniper said:
I had mine repaired and yes, the lines seem to be gone. I think this has to do with the improved hardware and not because its plastic.
Click to expand...
Click to collapse
That's good to know, maybe I'm wrong about it being plastic although it doesn't feel the same. Is your's definitely still glass?
Why not post some pics here ? Wanna see it. Best would be to do the pics in various angles to a light source to see what consistency it has ............
I noticed the diamond etchings on my HD2 straight out of the box brand new, still glass though.
may be we should look at tmob us screen and see it's type
Oberoth said:
there are capacative screens with plastic face...
the samsung f480 has one either
Click to expand...
Click to collapse
All capacitivie screens are made of glass - or else the technology wouldn't work since its basically a grid with electric current covering the screen, and this grid you disturb with your fingers. Plastic is NOT leading electricity so it would not work. And btw, the Samsung F480 has a Resistive touchscreen.
That's not strictly true. Neither glass nor plastic conduct electricity - but both act as a dielectric for electrostatic fields. A capacitive touch screen can theoretically work with either plastic or glass (or even air), because capacitive touch doesn't actually require that you touch the screen.
glass conduct electricity
Strictly speaking, hardly anything conducts no electricity, it's just a question of a material's resistance and therefore the amount.
Hi I have bought a Blackstone on ebay,I have noticied that the touch screen have a little gap between the top of screen and the screen below.When you press the screen going down for about 1 mm it's normal?, I don't know if you understand me, my english it's very bad...
schuldiner said:
Hi I have bought a Blackstone on ebay,I have noticied that the touch screen have a little gap between the top of screen and the screen below.When you press the screen going down for about 1 mm it's normal?, I don't know if you understand me, my english it's very bad...
Click to expand...
Click to collapse
The Blackstone has a plastic guard over the 'actual' screen. This will push in slightly. Sounds fine mate.
Regards
It shouldn't be like that. True, there is a tiny distance between digitizer and lcd, but NOT 1mm
retsam88 said:
It shouldn't be like that. True, there is a tiny distance between digitizer and lcd, but NOT 1mm
Click to expand...
Click to collapse
I daresay there was a bit of an exageration in the original post to be honest, i agree with what you say though. How would you explain it to someone if you had the issue? The screen goes down 0.15mm? A bit hard to assume in these cases i believe. It seems exagerated, If it really was 1mm, the cover would be away from the phone yes?
1mm it was a approximate distance, may be it's less than 1mm I think, but you confirm that it's present a little distance between the first layer of the screen and lcd.
Thanks
schuldiner said:
1mm it was a approximate distance, may be it's less than 1mm I think, but you confirm that it's present a little distance between the first layer of the screen and lcd.
Thanks
Click to expand...
Click to collapse
Yes mate, there is a slight gap between the screen and digitizer.
hey. i have 2 questions i would like to ask about the nexus S
the screen it self. is it 2 parts seperate ? the digitizer and the screen it self sepearte like say most HTC phones or Iphone 3gs ? or its glued to each other like iphone 4 ?
i am wondering because if i get the upper screen cracked or scratched badly and i wanted to change it. do i have to change the super amoled as well too " the inside screen ? "
my other question is the bezel around the screen. is it replacable ? or it also comes with the screen?
thanks
The bezel is removable. It just clips outif you try. I once removed mine.
Sent from my Nexus S using Tapatalk
thank u. but what about the screen it self. is it 2 parts seperate ? the digitizer and the screen it self sepearte like say most HTC phones or Iphone 3gs ? or its glued to each other like iphone 4 ?
i say this because i have small scratch on my iphone screen . was wonderinfg if i can replace the digitizer or not. because i dont want to change the super amoked screen it self . its perfect
ll_l_x_l_ll said:
hey. i have 2 questions i would like to ask about the nexus S
the screen it self. is it 2 parts seperate ? the digitizer and the screen it self sepearte like say most HTC phones or Iphone 3gs ? or its glued to each other like iphone 4 ?
i am wondering because if i get the upper screen cracked or scratched badly and i wanted to change it. do i have to change the super amoled as well too " the inside screen ? "
my other question is the bezel around the screen. is it replacable ? or it also comes with the screen?
thanks
Click to expand...
Click to collapse
I've managed to break the glass on my Nexus S. The display system is an integrated unit and is always replaced along with the bezel.
PS: Mine is a sLCD version.
that ummm. dont under stand. the screen on each phone has 2 parts. inner screen and the one on top. the digitizer. some of them are glued to each other. some are not
ll_l_x_l_ll said:
that ummm. dont under stand. the screen on each phone has 2 parts. inner screen and the one on top. the digitizer. some of them are glued to each other. some are not
Click to expand...
Click to collapse
Do these links tell you anything?
I saw online selling NExus S digitalizer, so it should be separated
ll_l_x_l_ll said:
that ummm. dont under stand. the screen on each phone has 2 parts. inner screen and the one on top. the digitizer. some of them are glued to each other. some are not
Click to expand...
Click to collapse
I think these guys did a pretty good job putting it under the knife.
http://www.ifixit.com/Teardown/Nexus-S-Teardown/4365/1
lqaddict said:
I think these guys did a pretty good job putting it under the knife.
http://www.ifixit.com/Teardown/Nexus-S-Teardown/4365/1
Click to expand...
Click to collapse
from that link
"
If you shatter the front panel glass, the SAMOLED has to be replaced as well -- they're fused together"
I recently had my Galaxy S4 screen replaced because it was cracked. Now I'm having trouble with the touch. I can't move apps around in the middle section all the way across the screen. It's also not registering if I press letters in the same region unless I press fairly firm. What What could What could thus be?
A bad touch screen. Get a new one.
You Need New touch screen
,cheap touch screen make you lost more money
Touch screen what? The S4 and all other AMOLEDs don't have seperate touchscreen digitizer. You probably got a big gap between the actual screen and the glass you replaced.
The way to confirm the actual screen is defective you have to remove the glass you replaced and try to touch directly on the screen if it's ok.
ongbac said:
Touch screen what? The S4 and all other AMOLEDs don't have seperate touchscreen digitizer. You probably got a big gap between the actual screen and the glass you replaced.
The way to confirm the actual screen is defective you have to remove the glass you replaced and try to touch directly on the screen if it's ok.
Click to expand...
Click to collapse
They are seperated, they are just glued together and can be separated.
Lennyz1988 said:
They are seperated, they are just glued together and can be separated.
Click to expand...
Click to collapse
Nope dude. The glued glass on top of the screen is just protective glass. It doesn't work as touchscreen digitizer. Try it yourself, you can touch your screen even when you seperate the glass.
ongbac said:
Nope dude. The glued glass on top of the screen is just protective glass. It doesn't work as touchscreen digitizer. Try it yourself, you can touch your screen even when you seperate the glass.
Click to expand...
Click to collapse
Look for example this:
http://www.ebay.com/itm/SAMSUNG-GAL...UK_Mobiles_Accessories_RL&hash=item3a83d54070
or is this just a glass on top of it?
Lennyz1988 said:
Look for example this:
http://www.ebay.com/itm/SAMSUNG-GAL...UK_Mobiles_Accessories_RL&hash=item3a83d54070
or is this just a glass on top of it?
Click to expand...
Click to collapse
That's just a glass on top of the display man. Do you see any wires or something? I don't. How could it transmit any data about touch then?
The touch digitizer and the screen is both on the display of AMOLEDs. The glass you Crack is just. .. glass
ongbac said:
That's just a glass on top of the display man. Do you see any wires or something? I don't. How could it transmit any data about touch then?
The touch digitizer and the screen is both on the display of AMOLEDs. The glass you Crack is just. .. glass
Click to expand...
Click to collapse
Aha, ok learned something new today.
Hello, i replaced the broken screen. At now, when i tab on screen i think that something is pushing on a screen from behind. Where can be issue?
Video: youtu.be/YO-SOjJ9SuQ
The next problem with this screen is that when i sticked a tempered glass on a screen i had low sensitivity for tabs on bottom corners of the screen. Glass is sticked well.
Thank you for help me
sergejgonchar said:
Hello, i replaced the broken screen. At now, when i tab on screen i think that something is pushing on a screen from behind. Where can be issue?
Video: youtu.be/YO-SOjJ9SuQ
The next problem with this screen is that when i sticked a tempered glass on a screen i had low sensitivity for tabs on bottom corners of the screen. Glass is sticked well.
Thank you for help me
Click to expand...
Click to collapse
I don't see anything wrong with it. Just sensitive electronics.
I don't see anything wrong with it. Just sensitive electronics.
Click to expand...
Click to collapse
Hi, look at waves on screen after the tap this is what i mean
Thank you
markrulesallnow said:
I don't see anything wrong with it. Just sensitive electronics.
Click to expand...
Click to collapse
Hi, look at waves on screen after the tap this is what i mean
Thank you
Ya i see them. Have u ever pushed on an LCD screen before?