Is there a way to map a hardware button to display the Notification popup (New Mail, Voice Mail, Reminder) while in another application? I know you can go back to the Today screen and use the left Smart Button, but I would prefer to do it without leaving that screen.
I currently use SmartsKey and AEButton to remay my buttons all over the place, but from what I can tell neither of them can do this.
Any thoughts?
Related
What i'd like to do is assign more than 1 binding to the outlook button.
Exactly the same as the "voice dial" one has as standard (press for voice dial, hold for voice memo)
What i want is (on the mail/outlook/text button) press to open outlook, hold to start new text message.
Is there a reg key to change to allow this dual use?
If not (and i'd rather not add more software to map buttons) what software will allow this? Multipress isn't really an option, as pressing the button again now will cycle through the different text settings (sms, mms, e-mail etc) and put you in whatever folder you were in last (inbox, outbox etc)
EDIT:
While i would still like to be able to do this, thanx to vijay555 who's phone tools 2 lets me start a blank sms from a today screen .lnk file
The only way to do it is using Vito Button mapper.
Button mapper supports macros as well.
Beeble
Have you read the thread about putting VJSMS on the softkeys, to start an sms straight from that key..
I'll have another related release that you'll hopefully like, coming soon.
V
carphead said:
The only way to do it is using Vito Button mapper.
Click to expand...
Click to collapse
I had to hard reset my Qtek9100 after Vito Button mapper installation, so I couldn't recommend it...
uppps another one ?¿?
Regards
vijay555 said:
Beeble
Have you read the thread about putting VJSMS on the softkeys, to start an sms straight from that key..
I'll have another related release that you'll hopefully like, coming soon.
V
Click to expand...
Click to collapse
I'll search some more later and keep an eye on your site!
Vito Button Mapper works here, but after a soft reset I get a popup message saying a certificate is missing.
Also, after installation my backlight was turned off. Went to settings and restored it and all works fine now (also after a reset... only problem is the popup)
Vito Button Mapper screwed up my softkeys.
Only in the 'Today Screen' however thats were a couple of my most used buttons were.
Now they don't work and sometimes change?
I would urge you NOT TO USE if you want to use soft keys in Today screen.
Robin
Soft keys can be configurated in the app, that is why you lost them for now...
Reconfig them:
Start -> Settings -> Buttons
Configuration drop down -> Today
Top 2 entries: Left softkey & Right softkey
Well yours must be different to mine.
When I open buttons the only choices I have are for the 5 hardware buttons.
No other choices are available????????
Robin
Does anyone know a software that can toggle touch-screen feature on/off on Magitians?
I don't mean blanking the screenduring a call, but rather a program that blocks screen tapping. I want to operate my S110 with buttons without worrying about accidental screen touches.
Hi
You can always use TPenable.exe and TPdisable.exe from any Extended ROM.
Good luck
Thanks but... TPDisable.exe disables all buttons also. So, it doesn't work for me.
Hi, do a search for "mortsaver".
I know MortSaver. This program turns screen off entirely, not only touch-screen feature. So, doesn't work for me either.
amed said:
I know MortSaver. This program turns screen off entirely, not only touch-screen feature. So, doesn't work for me either.
Click to expand...
Click to collapse
As far i understud, you can configurate it to do what ever you need:
"What is it good for?
MortSaver is a combination of screensaver, keylock, and a "stay off!" function.
Screensaver:
The display's turned off, but the PPC keeps running (e.g. for audio players). In spite to other tools, MortSaver turns off the dispay again if it's been switched on by e.g. an alert or the on/off button.
Keylock: All buttons (except the one necessary for deactivation, of course) are locked, as far as it's possible to me. A few programs sadly use some undocumented tricks, which allows them to get the button presses even if they're assigned to MortSaver in the system, or set themselfes as topmost window, by which the direction pad keys will be sent to this window. Disabling MortSaver can be done either with one button or a sequence of two buttons.
"Stay off!": PocketPCs are often switched on by themselves or accidentally - by alerts (appointments, SMS, ...) or accidental button presses in your pocket. In those cases, MortSaver can turn off the device again after a selectable timespan (so you recognize MortSaver's active and the device alive).
After power on or system-caused disabling of the screensaver, MortSaver shows a countdown until the screen or device (depending on settings, also see instructions), the button(s) to deactivate it, the time, battery level, a user definable text (e.g. owner infos), and on Phone Edition devices also signal strength and hints about missed calls and SMS."
Source Official mortsaver web page:
http://www.sto-helit.de/modules/edito/content.php?id=36
I am not saying that Mortsaver does not deliver what promises. Simply I am looking for something different.
To rephrase what I need in other words:
1/ having screen on (to see what is on the screen)
2/ having device making no reaction on screen taps
3/ having all button working (slider, power, application)
I've configured my S110 to operate and run everything I need on the run by one hand using just buttins. But quite often accidental touch by finger or cloth (when I pulling it of the pocket or putting it back) stops what I run or making a second call to the person I've just talked.
Ok, now i get your meaning. Perhaps yo can ask directly to mort developer as i did many times at his own email witch you can find at his web page.
Look for Pocketmax ScreenGuard works perfectly. Costs some money though.
ScreenGuard ( http://www.pocketmax.net/screenGuard.htm ) still locks the buttons, though? Except for the green call button - and then only when you also use their PhoneAlarm app.
ScreenGuard falls close to what I am looking to. But it locks buttons and couple of times it locked "too good" - I couldn't unlock my device and needed to HR.
maybe u want to try this...
assign it to any button to lock....
to unlock, hold record button and calendar button...
i assigned it to record button for easy usage...
cheers...
nonentity said:
maybe u want to try this...
assign it to any button to lock....
to unlock, hold record button and calendar button...
i assigned it to record button for easy usage...
cheers...
Click to expand...
Click to collapse
But this one also turns screen off :-(
Hey guys... before I begin, heres what I have installed.
tcmp with various reg edits
Wisbar Advance2
Wisbar Advance Desktop
Null Keyboard
Here are my questions.
1. the volume slider no longer adjusts the system volume at the today screen. how can I fix this?
2. I was looking to have a big icon/object for the "Lock" function. How can I do that using Wisbar?
3. TCMP has enabled a secondary function for the 2 buttons below the screen--the left one for the "start" menu, and the right one for "close". After installing Wisbar, the right button still closes, but then after closing, it brings up the contact list, which is the primary function of that button (with a short press). How can I undo that?
4. The notification screen that pops up when I get a text msg, etc, is gone!(ever since Wisbar) I just see the icon on the top, but I want that screen back! how can I do that?
5. What is a good program to manually assign all buttons on the system to whatever function I want? (i.e. lock, changing the 2 buttons function, etc.)
Any help would be great!.
i'm in a phone conversation, and someone asks me if I'm available on a certain date, i would want to check my calendar to see if i'm available.
i wanted to do this yesterday but after looking for more then a minute (while the call was open) i gave up.
does anyone know how to do this or even if it is possible???
(so open my calendar during a phone conversation)
pin it to the start menu
push hardware home button. then hit calendar on home screen. hit call hardware button or phone status in task bar on touch screen to get back to dialer screen.
I have the calendar in the start program. Everyone by default also has the "Today" on line one of the start menu, which will minimize the phone, take you to home screen, and allow you to open Tasks (or in your case, calendar). Finally, use the close button (X in upper right) to close the phone. It doesn't disconnect the phone.
I have the calendar in the start program. Everyone by default also has the "Today" on line one of the start menu, which will minimize the phone, take you to home screen, and allow you to open Tasks (or in your case, calendar). Finally, use the close button (X in upper right) to close the phone. It doesn't disconnect the phone call even if you close the window (trust me, do it daily for work).
thx for the replies guys!
I'd like to disable three btutons if possible...
Those two soft keys on the keyboard (for the bottom left bottom right of the screen buttons if you know what i'm refering to; if not.. the one that closes your sms when you accidently hit it!!)
If i could get it app specific thath would be awesome; could disable those for messaging app then disable the center select from the four way directional for the emulator i use;
Problem with the meulator is that button PAUSES the game
Any suggestions? Short of ripping them off? (Totally willing; it's frustrating.)