Related
I'm trying to get a net connection for my laptop over bluetooth through my Jam.
I'm on Vodafone UK & they provide software called "Connect Me" for the laptop but, of course, the list of supported phones during setup doesn't include the Jam or any PPC Phone device.
Does anyone know how else I can go about this?
Cheers,
M1
Hey. It shouldn't be too difficult. The only thing you need is to start the modem application on your Magician and (provided that you have a working GPRS connection for your provider already configured) enter the exact (!) name of this connection (on my Magician it's the GPRS connection under "ISP" - use the name of this GPRS connection, not ISP!) in Options->Use preset GPRS APN and also check the box. Then you have to go to the settings on your PC, check in your Bluetooth manager the available services and click the modem service (SSA or something). There you have to enter your name and password of the provider and as phone number (at least for german providers) *99#. In the last step, you might have to check the TCP/IP settings and set them the way your provider needs them to be. Hope it helps.
Thanks Dandie - I'll give it a go....
Nope - sorry - I'm totally baffled.
My GPRS connection on the phone is fine in normal use and is names "voda gprs".
By "the modem application" I assume you mean "Wireless Modem".
In the tools/option menu I have "Preset GPRS Connections" checked and the APN box completed as "voda gprs"
The connection type is set to bluetooth.
Whjen I press the "Start" button not a lot happens. It doesn't connect to my GPRS service.
However, if I connect to my GPRS service manually by clicking the connection icon in the bar at the top and clicking "connect GPRS" the "Connection" box in WModem turns yellow - which I assume is a good thing.
I have bluetooth turned on on my jam and my laptop (sony vaio) and the devices are already paired.
However - the laptop BT manager (Bluespace NE) only shows the following services available on my Jam: File Push/Serial/vCard & Dial up Networking.
No modem service. Clicking dial up networking gives me Dial-up networking Com 8 & Serial Port Com 10 options which I have enabled. But clicking dial up networking just pops up the options box again and doesnt seem to connect.
Launching browser on laptop having done all this = still no connection.
Jeez - I'm not new to this and have had this laptop connected to numerous mobile phones for internet access but this is driving me nuts.
I just want to make a BT link launch my browser and go but it ain't happening ;(
You're on the way. Don't give up. It's not anywhere as easy as it is with a normal mobile phone and a special application. This is the fault of MS if you ask me.
Anyway. You shouldn't connect to your GPRS connection when you use the modem. Otherwise it won't work. So disconnect on the PPC, start the modem application and select bluetooth (the APN setting is alright already). Klick on start. Now you have to initiate the connection from the PC. Connect to the dial up profile of your PPC. Then should a normal DUN dialog be displayed, allowing you to enter the password, number etc. These informations are given by your provider. The bluetooth modem might have to be configured separately in device manager of the system. (you don't need AT strings when you use the APN setting on your PPC)
I give up.
Followed these instructions to the letter - also followed MS support sheets & nothing.
Just end up with helpful error message - error 777 the modem on the remote computer is out of order.
My God - this should be soooo simple. It's a basic requirement. But I am going to have to revert to my trusty cellphone for mobile internet from laptop.
Even if I could get it to work I don't want to have to launch the Wmodem app on the Jam every time I need to connect. This is screwed up.
Grrrrarg.
Thanks for the advice anyway.
Hi,
It is a requirement to start the Wireless modem app on the Magician [if you want to use it as a modem] and set it to Bluetooth.
On the PC, go to control panel > phone and modem options and select the properties of the modem installed for the Magician - I am on XP SP2 and it is installed as a 'Standard modem over bluetooth link'.
On the advanced tab, enter +CGDCONT=1,"IP","Internet" and then set the Dial-up number in you network connection to *99# - that is it.
I am on T-Mobile [UK] and it works fine
@pcd
When you enter the AT string, you have to leave the option "Use preset GPRS connection" in the settings of the Modem app on the Magician cleared. For me, both ways worked, either by naming the (working) GPRS connection in the settings or by entering the AT string. I prefer the first solution. You can't combine them! (at least it always failed when I tried)
@MarkOne
You're damn right! It really is too complicated and could have been made much more comfortable. But once you get it to work, it's quite flexible too, since you can connect via cable, infrared and bluetooth.
@pcd
When you enter the AT string, you have to leave the option "Use preset GPRS connection" in the settings of the Modem app on the Magician cleared. For me, both ways worked, either by naming the (working) GPRS connection in the settings or by entering the AT string. I prefer the first solution. You can't combine them! (at least it always failed when I tried)
@MarkOne
You're damn right! It really is too complicated and could have been made much more comfortable. But once you get it to work, it's quite flexible too, since you can connect via cable, infrared and bluetooth.
OMG, I got it to work, and I'm using the internet connection now on my laptop. I've had the SX-56, the MDAIII, and now the MDA Compact. I must say that I like the compact the best as it is the most practical. I have T-Mobile in the USA, and the initialization string for the bluetooth modem on my laptop is:
+CGDCONT=1,"IP","Internet3.voicestream.com"
My APN here for T-Mobile is internet3.voicestream.com. I think it's different for people who use WAP though.
Thanks guys. Now I can sign on by bluetooth, USB, and serial.
Afraid I gave up on this a long time. Nothing I tried worked and life's too short to spend several days trying to get my "phone" to work as a gsm modem.
The anansky rom upgrade, by comparison, took just under an hour (mainly as it was my first outing with a hex editor).
Mark One, I totally agree with you. I've tried everything and I can't get the bloody thing to work.... I had no problem last time with the Widcomm stack on XP but now that I've upgraded to SP2, the bloody MS Stack is driving me nuts.... Tried all the instructions here and it still won't work. It's pissing me off!
There is the option within Wmodem to use bluetooth, i have only used it over usb atm tho
http://forum.xda-developers.com/viewtopic.php?t=34570
Imp
Yeah, I guess on the PC you need the Widcomm Stack, or at least any other than Microsoft
You can find many hints in the web how to make the Widcomm stack runs under SP2.
i ve got nearly same problem but i did all the same and cant connect
ive got internal BT (toshiba), i create SSA connection (automaticaly at port com 40) , entered extra dial string command (it is 100% correct), turn on Wireless modem program at my HTC, choose bluetooth and tap start.
Maximum that i reached was that connection led turned yellow. Other 2 are black.
i tried to make direct port connection at ports from 1-10 and to install modem manually. But i could choose only standart modem cause usb modem driver dont fit.
So ... dont know what to do
Ive got the same problem at the minute, however when i browse what services are availible on my magician in "My Bluetooth Places", dial up networking isnt one of them!
Also i havent got any form of bluetooth modem installed on my pc anywhere (i.e the phone) ive tried enabling wmodem and then searching for it but i get nowhere fast
Please help i need to get this working!
Ive just been in touch with Imate (who are BRILLIANT by the way)
and i have solved my problem! here is the pdf they sent me which i followed and it worked fine!
argh .. didnt help. I have another BT browser and it is not same as u have . And it creates not bluetooth modem but only a standart 33000 kbs modem
so , i need a driver for BT modem on Jam
When your Stack on the PC supports SSA, you can install a Bluetooth modem yourself. Just go to Hardware, select "device connected", then chosse "select yourself", then "Add new hardware", then select Modem then "select Modem yourself", search for Widcomm (maybe other Stacks work aswell), select Modem and then your outgoing com port! Then you should have the Modem available.
I think the radio version 1.12 didn't work for me either. Try installing the radio 1.13 (which I would recommend anyway) and maybe also the latest ROM version (I successfully use version 1.12).
You need some patience with that crap but it works.
Chaosmage, which bt software you using?
been using mine as a modem since february.
my way is similar to one above, except that I DO NOT turn the wireless modem on.
using the XP SP2 built in stack with an MSI 6967 dongle.
in bt services in control panel, pair the devices.
on device tab, highlight the device and click properties
go to the services tab and tick the DUN service.
click ok and wait for the new hardware bubbles by the clock to disappear
In phone and modem options in the control panel, click the modems tab
open the properties for the standard modem over bluetooth link
on the advanced tab, enter at+cgdcont=1,"IP","internet" in the extra initialization field
click ok and then go to network connections
create a new connection that dials *99# using the standard modem over bluetooth link - vodafone would tell you to use a login and password of web, but that's not really needed as they don't use authentication (none of the uk networks do)
This i know works, cos it's how i do it, and also how i used to set them uo when i worked at vodafone in newbury.
Any q's, feel pree to PM!
And another question about bluetooth modem/gprs/laptop...
Even though I've read all (I guess) questions and answers here.
I want to browse over the internet using my MDAII as a bluetooth modem.
- My provider is T-mobile in the Netherlands
- MDA bluetooth is in discoverable mode
- On my Windows XP pro laptop I have paired my MDA
- I've got a bluetooth modem configured in Control panel with the string AT+CDGCONT=1,"IP","internet",0,0
- Number to dial is *99#
When I doubleclick the DUN I get a messagebox which tells me to pick up the handset, dail *99# and click OK. When I do that nothing happens and the connection is disconnected.
I tried to give in the phonenumber in a terminal window (ATD*99#), then I see CONNECT and the usual garbage, but when I close the window it is still disconnected.
A "query modem" in the modem configuration is succesfull. My laptop is able to communicate with the modem, but that is all.
What do I do wrong?
I've tried using an USB modem, but that gives the same result.
if you are using pocketplus or another program which close applications insted of minimizing them when you press the X
then i guess closing the connection windows would close the connection
Thanks for your reply.
I'm just using Wmodem on my MDA and a DUN connection on the laptop. Everything as simple as possible. The terminal window is an option from the DUN connection.
Hello all,
I know this has been covered so many times but I cant seem to get an all in one solution. I can find countless walkthroughs but no drivers anywhere.
I have Tmobile MDA compact which I want to use as a USB GPRS modem on either win xp or win 2000.
I dont have my CD so no driver. Does anyone have the USB driver or a link?
IF anyone uses this I would love to hear some success stories. I did try to do this 6 months ago on an old pc when I first got the device but no luck.
I would really find it helpfull if I could get this working today!!
Thanks!
Hi yarod_g14,
I use this for cheap, but slow internet access. You'll need to find the usb_modemdialler. I'll upload it this evening if you're still interested by then. It wasn't on the cd, found it somewhere on the web. Works great: start wireless modem (set accesspoint in the options) on the magician then connect usb start usb_modemdialer check accespoint & connect. If there's a driver too I'll upload it aswell, can't remember.
Cheers, M
Somehow attachments don't work for me.
That would be so appreciated!
Thanks very much!
If somebody needs: The HTC Modem Driver from the supplied CD, to use the Device as a modem on PC/Notebook
http://home.teleos-web.de/vschildmann/htcmodem.rar
Hi yarod_g14,
I've uploaded a tiny zip file USBModem_Dialer.zip in the \USB_modem folder. It contains an inf for the modem & the dialer itself which requirers no installation , just run it. Remember to install the modem first.
Have fun, M
I have had trouble with this up until recently.
1st make sure your gprs connection works by itself on your PPC.
I disabled active sync over usb on both my PPC and my laptop from within active sync itself.
I then loaded up the Wmodem application on my ppc and clicked "tools" in this menu i checked "preset GPRS connection" and in the APN field i entered my APN name (for me it was orangeinternet) after clicking "ok" i was back to the main program screen.....i then clicked "start" and attached my USB cable to my laptop.
My laptop (windows XP) detected a new USB device, which i gave it the modem inf file attached in the post above this then gave me a "HTC USB Modem" in device manager.
Using the USBModem_Dialer.exe application, i had a drop down box at the bottom which was named "HTC USB Modem" and i changed the APN field to my network providers APN address (orangeinternet for me) my network provider does not require a username and password so this was left blank.
I then choose "Dial" after about 10 seconds my laptop causes my gprs connection on my phone to connect and then shows a stanard dial up connection icon in the taskbar.
Hope this helps!
Imp
Thnx Impossible,
U filled in the gaps. I included them as .pwi in the new zip upload (same name & place), so everyone can benefit.
Regards, M
Is there any way of getting the Magician to be a IrDA (Infrared) modem, instead of a USB/Bluetooth modem? I need it to be IrDA for my old laptop
Hi jainoxi,
Googling around for 'modem dialer ir' I found this: http://www.pdastreet.com/forums/archive/index.php/t-39280.html
They're talking bout ir pda modem dialing mobile phones & required drivers, so maybe your wishlist is there discussed as well
Cheers, M
Hello!
Impossible: did you set up a new dialup modem connection before to connect the jam via usb?
I mean, i tried to use the jam as a modem. I followed your step by step tutorial. But it doesn t launch any gprs connection on my phone ;(
Could anybody tell me much about this?
thx by advance
This is how I make the connection:
- disconnect magician from usb
- disconnect from gprs
- start Wireless Modem program on magician
- check connection type usb
- check tools -> options: preset gprs connection & give in accesspoint name
- press start button
- disable usb connection in PC AS
- connect magician to usb
- install modem driver
(now you should see your htc modem in the modem control panel item)
- run usbmodem_dialer
- check the modem in the lowest box & access point in the first (tmo doesn't use user/password)
- hit the connect or whatever button to set up the connection, takes about 10 seconds
Now you're connected or you'll receive an error. I noticed that sometimes I have to add a ,0 to the init string from the modem (on the pc)
Does this help?
Well these are the steps i followed but it doesn t work...
I suppose it s linked to a msg appearing when i try to acces modem options configuration tab in the xp's control pannel. It says:
The phone and modem control pannel cannot be opened. This may occur some problem in the phone service' startup (sorry for my translation, in fact my msg comes in french as it s my os language).
So i ll stop with this, i ll format my computer in a month so I hope this will resolve this =)
Thanks anyway!
OK, then good luck with your re-installation. I guess you're problem relies in that area. Too bad cause it works fine.
Regards, M
Is it something where I can use as a modem if I connect it to my notebook or computer if I don't have internet service or if I am on the road?
I have the Cingular 8125 and have the MediaNet unlimited package...is that all I need to do it or will I be charged for trying this?
Thanks!
Did your phone not come with a manual?
Modem Link uses the data connection on your phone to share the internet connection with a pc or laptop...if you don't have a data connection it's not going to do you any good.
I have medianet unlimited data plan...I did some searching yesterday ...it connected..but I couldn't browse at all...I also tried connecting with bluetooth but it kept saying Error 633
help please...
I have Tmobile and their data plan so I can speak to that. I use the Wizard as a modem and log into the GPRS network. I tried connecting via USB but was never all that successful so I tried via a bluetooth link and it works and works repeatably. First thing you have to do is establish the connection the right way, on my Dell it can be either a dial up networking connection or serial port, here you need dial up network. On Tmobile you dial in by dialing *99# and then you're logged in automatically and I can browse the net, send emails or whatever, it's like a fast dialup but slow by broadband comparisons. I'd have to say I spent a fair amount of time messing around with this using different settings, if you can log into your net then you should be able to browse. I do not use modem link however. I upgraded my ROM to the latest Tmobile rev and it was gone, just as well because I don't need it.
Modem link allows you to use the GPRS connectivity on your phone to connect your laptop/pc to the internet.
To use this you need
USB Cable for your phone OR a laptop with an InfraRed port
HTC USB Modem driver - should be on a CD provided with the phone, O2 UK provide it on a CD labelled Wireless Modem Driver.
_______________________________
Run the Modem Link application on your phone select either "IRDA COMM"(This InfraRed if you haven't guess) or "USB" as appropriate. If using USB connect the phone to the PC/Laptop now, if InfraRed align the ports now.
PC/Laptop will detect the device as Generic Serial and ask what it should do to find driver (assuming your using Windows XP), at this point you use the CD with the driver on browse to the folder containing the driver and click Next.
finish the hardware installation and your modem is ready to go.
If you want to use your GPRS connection provided by your network create a new dial up connection on your laptop set to use the HTC USB Modem as its modem, and set the phone number to *99# username should be the same as in your phones GPRS settings.
Hope this helps.
ok I accomplished setting and running as USB...I dont have infared...but I want to connect wirelessly thru my bluetooth device, "Blue Soleil" ....I'm having trouble..it say I'm connected to COM14 then it automatically disconnects and give me an error "Dialing *99#.... Error 692: There was a hardware failure in the modem (or other connecting device)."
Might not be much help but I always had issues connecting my notebook using Modem Link via Bluetooth. I don't think the BT stack thats on this device plays well with some other chipsets when it comes to modem connectivity. Could just be my experience though. I just broke down and got a short 1 foot USB cable I carry with my laptop.
Media Link is Great
I use Media Link to connect my desktop to the net at home. I live in the middle of nowhere and don't see the point having my wizard and a home phone just to connect at a dial-up speed. That's right, it's not very fast...but it works. If you have T-mobile, put in the cd that you got with the MDA and open it. In the CD you will find an OEM folder that gives you instructions on where to load the driver and how to set up the connection. It turns it into a modem.
I have Cingular and based on your instructions...the CD looks the same where it has the OEM folder and driver..but the installation instructions is only for USB type connection..
I Lost the CD
Can someone post the drivers from the CD? I have lost my CD and I want to connect my computer at work to the internet.. can someone help me out? I have T-Mobile MDA and unlimited internet plant. Which btw I think the hotspot plan is stupid.. I don't use it at all but yet I still have to pay for it.. grr.. but yea any help wit the driver?
smileyaj2005 said:
Can someone post the drivers from the CD? I have lost my CD and I want to connect my computer at work to the internet.. can someone help me out? I have T-Mobile MDA and unlimited internet plant. Which btw I think the hotspot plan is stupid.. I don't use it at all but yet I still have to pay for it.. grr.. but yea any help wit the driver?
Click to expand...
Click to collapse
Please make sure you follow my articles - I've also posted a link to the drivers from my all-in-one article on all these questions ( http://forum.xda-developers.com/showthread.php?t=282780 ).
http://www.winmobiletech.com/sekalaiset/usbmodem.zip
I'm trying to get my Vario II to act as a modem to my laptop using the phone's 3G connection.
I eventually located the "generic modem" driver files to permit the phone to act as a modem to my laptop but I don't know what to do next. I've installed the driver and Windows (XP) reports that the generic modem is installed and working OK.
The downloaded files also included a program called "HTC USB Modem" and when I run this I am asked for a Username and password - and I haven't a clue what I should enter since I don't normally have to enter anything on my phone to access 3G.
Can anyone tell me how to proceed? Or tell me another way to get my phone to act as a modem to my laptop?
Cheers.
Bobby
i have the same problem, have you solve the problem ?
francesco
3G access thru PDA
u could try this...
Number: *99#
Username: your 3G access username (some telcos do not use it so leave it blank)
Password: Your 3G access password (some telcos do not use it so leave it blank)
remember to set your access point on your wireless modem before connecting.
cheers.
leo-chan said:
u could try this...
remember to set your access point on your wireless modem before connecting.
cheers.
Click to expand...
Click to collapse
That last bit threw me Leo. What exactly to you mean by this?
Your network requires you to connect to an access point. If your device came from the network it was already set up to do so. As you need to manually enter the access point (or APN) and any user/password details, you need to google for your networks GPRS Settings.
For example with Orange, their APN = orangeinternet
(with no username or password.)
@bobbyelliot
I notice you are using T-mobile Uk
Their GPRS settings are:
Mode ...................................Permanent
Security ...............................Off
Bearer .................................GPRS
Connection ..........................When Needed
IP Address ..........................149.254.001.010
Port Number ........................9201
Authentication ....................Normal
Access Point Name ..............general.t-mobile.uk
Login ..................................Automatic
User name ..........................user
Password ...........................wap
Web site http://wap.t-mobile.co.uk / or http://www.t-zones.co.uk
Thanks for these details Mike but I still can't configure my Vario II to work as wireless modem to my laptop.
When I create a new Dial-Up Networking connection (I have to do that, right?), it doesn't ask for any of this information (except the ID and password) but does ask for a telephone number - which I haven't a clue about.
Can someone give me an idiot's guide to getting the Vario to work as a (3G) modem to my laptop?
Cheers.
Bobby
type *99# for tel no
user for user name
pass for password
this is what i put for t-mobile uk
Thanks. Tried this. Would only begin to work with GPRS (not 3G). But still failed with GPRS, reporting "Please end data call first." (on my PPC). I messed about with various permutations of start/stop wireless modem etc. but I didn't manage to get a connection. Help!
Bobby
wiki
bobbyelliott said:
Thanks for these details Mike but I still can't configure my Vario II to work as wireless modem to my laptop.
When I create a new Dial-Up Networking connection (I have to do that, right?), it doesn't ask for any of this information (except the ID and password) but does ask for a telephone number - which I haven't a clue about.
Can someone give me an idiot's guide to getting the Vario to work as a (3G) modem to my laptop?
Cheers.
Bobby
Click to expand...
Click to collapse
I am no techie but I did it by following the info on the wiki site and I have the same phone and same network. Mine works ok - have you had a try this way?
active sync
bobbyelliott said:
Thanks. Tried this. Would only begin to work with GPRS (not 3G). But still failed with GPRS, reporting "Please end data call first." (on my PPC). I messed about with various permutations of start/stop wireless modem etc. but I didn't manage to get a connection. Help!
Bobby
Click to expand...
Click to collapse
Before you dial you need to untick the usb connection in the active sync. Otherwise it thinks you want to do that instead. Have you tried that?
bobbyelliott said:
Thanks. Tried this. Would only begin to work with GPRS (not 3G). But still failed with GPRS, reporting "Please end data call first." (on my PPC). I messed about with various permutations of start/stop wireless modem etc. but I didn't manage to get a connection. Help!
Bobby
Click to expand...
Click to collapse
Open the comm manager and disable the data option (a little PDA with two arrows) then open the modem and select start. Now when it is plugged into the USB cable the PC will not recognise it as a PDA but as a modem.
Then configure a dial up connection with the options described above and it should connect OK. If not call 150 and they will talk you through it in a couple of minutes.
bobbyelliott said:
I'm trying to get my Vario II to act as a modem to my laptop using the phone's 3G connection.
I eventually located the "generic modem" driver files to permit the phone to act as a modem to my laptop but I don't know what to do next. I've installed the driver and Windows (XP) reports that the generic modem is installed and working OK.
The downloaded files also included a program called "HTC USB Modem" and when I run this I am asked for a Username and password - and I haven't a clue what I should enter since I don't normally have to enter anything on my phone to access 3G.
Can anyone tell me how to proceed? Or tell me another way to get my phone to act as a modem to my laptop?
Cheers.
Bobby
Click to expand...
Click to collapse
Bobby,
Let's try and get this working for you. I assume that you are on a T-mobile Web & Walk package and want to use the Vario II as a modem for the laptop to allow a data connection via your T-mobile 3G and GPRS access? If this is so then here goes:
- Configuring WModem on Vario II - Go to Programs and select the WModem option. select Menu - APN Settings. Ensure 'Preset GPRS connections' is ticked and in the APN box enter 'general.t-mobile.uk' then click Done.
- Modem configuring - you seem already to have done this as you have installed the drivers and say it is working - that means you also know how to start the "wireless modem" function on the Vario II in programs.
- Forget about the HTC USB Modem software - just create a new Windows XP 'connection'. I found that this software just added a level of complexity and it meant that you had to enter settings (usernames and password) manually each time.
- Create a Windows Connection on the laptop/PC:
- go to 'show all connections' then click 'create a new connection' (or follow the new connection wizard if this view is what you use).
- Select 'Connect to the Internet', then 'Set up my connection manually' then 'connect using a dial-up modem' then in the ISP Name box that comes next enter something of use like 'Vario II (T-Mob) Connection'
- In phone number enter *99#
- In username enter 'general.t-mobile.uk'
- In the password fields enter 'one2one'
- Consider unticking the bottom 2 options for default and allow all users...
- Save all the settings so far and close the wizard and dismiss the dial-up that appears.
- Change Dial-up Settings - You have created a Vario II dial-up for use by the laptop but you need to ensure that the dial-up uses the Vario II 'HTC USB Modem' and not the built-in laptop/PC modem:- Start WModem - with the Vario docked or USB connected (and activesync running OK) start the WModem (from programs) by selecting Menu - Start. This should stop activesync automatically and then your laptop/PC should see the HTC USB Modem (the Vario II with the WModem running).- On the laptop/PC go into your available connections and right-mouse select properties on the new Vario II connection. In the first (general) tab under 'Connect Using' select/tick the entry for the Vario II modem that should read 'Modem - HTC USB Modem (COM#)' - where COM# is the com port automatically set by the laptop/PC. Check the phone number. Make sure that any other modem is unticked.That should be about it and all should now work! To use the connection just set-up turn off your wireless network or unplug the network cable, then connect the Vario II with the USB lead, then start WModem (the program and menu-start!) on the Vario II, then on the laptop just double-click the connection that you created. Note that the laptop/PC will display the data connection established to the Vario II not your 3G/GPRS connection speed. I changed the settings on my Vario II USB Modem to increase the maximum speed of the connection (to the modem only) to 921600bps and also checked the Hardware features were all ticked.
Hope this helps - let me know if you have a problema and I'd be glad to help more. The connection works seemlessly on my laptop and basic surfing and e-mail is really quite fast - way quicker than a 56k dial-up that we all used to have!
Regards
Tony, you beat me to it!
Good description on how to setup wmodem.
Imp
hi, this is NOT my guide just posted it here cos i cannot remeber the exact link ( it is from universal forum); i did everything according to this steps and all is good been using my hermes as modem since i got it yesterday hehe
so here is the guide and u need to have the driver mentioned in this thread.
have fun it works for me so it should work for u.
access point for t-mob uk : general.t-mobile.uk
user: user
pass: wap
-------------------------------------------------------------------------
You must have from your network provider: the internet access point name, your user name and password.
Download and unzip the attached file in a folder on your desktop
1- Disconnect the device from your desktop
2- On the ActiveSync icon on your desktop, open "Connection Settings". Uncheck "Allow USB Connection".
3- On your device: Go to "Beam" (in Settings/Connections), and uncheck "Receive all Incoming beams".
4- Then in Programs, click on "Wireless Modem". With the Connection type on USB, click on "Start".
5- Now, connect your device to the desktop. The "Found New Hardware Wizard" starts on your desktop. Click "Install from a specific location", then "Don’t search. I will choose…", then click on "Modems", and "Have Disk…" and go to the folder where you unzipped the attached file.
The HTC USB Modem will be shown in the compatible hardware: click to install. Continue if you receive the alert of the software not passing the Windows XP compatibility test (Continue anyway). Finish.
6- Now, in Control Panel of your desktop, open "Phone and Modem Options". Select the "HTC USB Modem" and click on "Properties". In the "Advanced" tab type for "Extra initialization commands":
AT+CGDCONT=1,”IP”,”xxx”,””,0,0
where xxx is your internet access point.
Click Ok to finish.
7- On your device (always open in the Wireless Modem program), click on Tools/Options. Check the Preset GPRS connections and write in the APN, your network provider internet access point.
8- Finally, on your desktop, go to "Network Connections" and click "Create a new connection". Choose "Connect to the internet", then "Set up my connection manually". Click "Connect using a dial-up modem", then give a name to your ISP. In phone number type *99#. Get username and password from your network provider.
Better keep a shortcut of this connection on your desktop for quick access.
Each time you want to use your device as a modem:
Disconnect your device
Disable ActiveSync from your desktop by unchecking the “Allow USB connection”
Open Wireless Modem on your device and push on Start (with the Connection Type on USB)
Connect your device, then dial from your desktop using the shortcut you created
PS: Remember to enable ActiveSync once you’ve finished.
managed to find the USB driver/file so i attached
sorry was too lazy to reply as I really can't remember the whole wireless modem ****...
moved on to wm6 now, internet sharing is a breeze.
T-Mobile Charges for Vario use as modem
Hi,
I set up the Vario II as described above and it worked fine. What I don't understand is why T-Mobile should charge more (£7 per month extra, or thereabouts) simply because a laptop is included in the system. Surely, provided you don't go over your limit for W&W (1 Gig) then why should they worry?
Am I likely to be charged extra, simply for accessing what I can already access from my Vario ii, but using a laptop as the "front-end"?
Cheers,
Ken
harrogate22 said:
Hi,
I set up the Vario II as described above and it worked fine. What I don't understand is why T-Mobile should charge more (£7 per month extra, or thereabouts) simply because a laptop is included in the system. Surely, provided you don't go over your limit for W&W (1 Gig) then why should they worry?
Am I likely to be charged extra, simply for accessing what I can already access from my Vario ii, but using a laptop as the "front-end"?
Cheers,
Ken
Click to expand...
Click to collapse
u need to exceed the limit of 2gb i guess to be warn but then you can still you ur w&w. i been using my vario a lot never had any problems with t-mob
if your using a updated rom you dont have the option of a WModem do you?