pls help me with some of my questions
i just upgraded my xda2 mini with a qtek 1.11.00wwe rom then i restored my device after the upgrade.
now for the question: if i hard reset my device will i still have the o2 stuffs or qtek stuffs???
then, if i had qtek stuffs, will i be able to remove them and put the o2 apps back????
thanks for any reply
if you do a hard reset, you will still have qtek stuff.
To have O2 stuff, you need to have a copy of O2 extended rom (assuming you have backup before upgrading ur rom), and run the O2 CAB files accordingly. But you need to repeat this ritual after each hard reset, for reason mentioned above.
Unless, you have upgraded ur rom only, and not extended rom.
pls help me with some of my questions
i just upgraded my xda2 mini with a qtek 1.11.00wwe rom then i restored my device after the upgrade.
now for the question: if i hard reset my device will i still have the o2 stuffs or qtek stuffs???
then, if i had qtek stuffs, will i be able to remove them and put the o2 apps back????
thanks for any reply
I dont think the qtek rom will install on the mini unless extract update file and perform a few modificatins, however once you have done the update the device will have the qtek apps, if you want to have th o2 customisation you will need to perform a hard reset with the o2 ROM and then do a soft reset just after you have done the screen alignment. Next in file explorer just go to the extended ROM and make a copy of these files on your SD / pc, and once the qtek update is installed you can then readd those customisation files from the extended rom
rgds
jim
thanks for the reply
damn, i have already done the upgrade. now i am left without a internet setting for my carrier.
who is your carrier? I am sure we could find a cab file for them.
rgds
jim
I want to upgrade my 02 rom to the imate rom
which imate rom supports the aku2 patch, as o2 dont know when there going to release this support.
this is also my question, is it possible to use Imate Jasjar ROM for O2 Exec, and where i can get it , then i can use O2 software on new ROM ? Thank you.
YES!
I upgraded my O2 Exec to the new i-mate ROM and man.. it's like owning a completely different machine.
plenty of memory left ( i guess memory leaks were mostly fixed)
dazzling speed.
machine doesn't get stuck several times a day.
I am happy.
You have the official ROM. Search through it, I don't know in which thread I saw it, but the filename is: JASJAR_WWE_13076_164_10900_wwe_ship.zip
You should be able find it here using the search button.
Then you need to use a tool called maupgradeut_noid_645.exe
Also available here. It will allow to install the JASJAR ROM on O2 Exec. But I think your warrenty will voice.. unless you revert back to the O2 ROM which is downloadable from my-xda.com
MOBILER
Sorry again, i have this question, my XDA Exec is unlocked by deffault, after updated with the Imate ROM, is my Exec still unlocked ? Thank you.
yes your exec will still be unlocked. I have an exec with a Orange simcard and the latest imate rom. No problems.
hi,i have a xda exec from 02,i want to upgrade to a imate rom.where i can download this rom?,how can i read a manual to upgrade this rom?
thanks
ccoyote51 said:
hi,i have a xda exec from 02,i want to upgrade to a imate rom.where i can download this rom?,how can i read a manual to upgrade this rom?
thanks
Click to expand...
Click to collapse
From the link under i-mate in the wiki page for universal
http://wiki.xda-developers.com/index.php?pagename=Universal_Upgrades
go to ftp://ftp.clubimate.com/
Get the file JASJAR_WWE_13076_164_10900_wwe_ship.zip. About 64Mb. Unzip the file twice & you will get the readme.doc file for the instruction.
Any idea where i can find maupgradeut_noid_645.exe? Tried search and tried the ftp, no luck.
doody said:
Any idea where i can find maupgradeut_noid_645.exe? Tried search and tried the ftp, no luck.
Click to expand...
Click to collapse
I think I used this version when I upgraded O2 XDA Exec to JASJAR rom. Didn't run into any problems
Thanks for your replies and PMs, i-Mate rom is now installed
Also got fed up with waiting for O2 update and tonight loaded the imate rom and push email is working nicely . I will try and post some instructions tomorrow if I get chance.
what should be the final specs
mine are ROM 1.13.82 WWE
rom date 11/30/05
radio 1.09.00
protocol 42.42.P8
Ext ROM 1.13.188 WWE
ihave downloaded imate JASJAR_WWE_13076_164_10900_wwe_ship should I update with this my O2 EXEC
Please advise
Here is the process as promised. There isnt too much too it so hopefully you will be able to understand my ramblings.
You need the Imate JASJAR rom file which I downloaded from
ftp://xda:[email protected]/Universal/Shipped_Complete_Updates/
The file that you need is JASJAR_WWE_13076_164_10900_wwe_ship.zip.
First thing to do is to extract the files in the exe. There are two ways you could do this.
You can do this by running the exe file this will extract the files into a temporary directory in your profile.. for example c:\documents and settings\username\Local Settings\Temp, look for a very recently created directory in there, don’t ok the error message that you get when you run the exe as it will delete the temporary files. Just copy the files out of the temp directory somewhere else.
OR
You can use winrar to extract the files from the exe. Extract all the files into a single flat directory. Remove all directory structures so that you are left with just one directory containing all the files. (didnt try this way but I presume it will work)
Then download this file
ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
Extract the .exe in there to the same directory containing all your other files.
Then you need to make a small change to one of the text files. Look in the directory for
RUU.conf
Open it in notepad and add this line
[CHECKCEID_TYPE]=1
then save it
That’s about it…..
Usual wavers at this point.. upgrading flash may lead to dead device.. do so at your own risk… invalidate warranty…etc etc
Once you have plucked up the courage connect your device up to Active sync and run the exe file that was contained in the MaUpgradeUt_noID.zip file that you downloaded.
It seemed to take around 30 mins for the whole update process.
Im just going through adding my applications again and setting up the Vodafone GPRS configuration but so far seems fine and push email works nice and fast so I am pleased I have made the change.
Hi jwarbutron,
Thanks for the walkthrough, Im following your instructions and have now started the upgrade.
I got past the screen where it tells me my current version numbers and what the new versions will be. I said OK, go for it, and now its displaying the 'Checking the information on your device .. please wait ..' screen, I presume I just wait for 30 mins or so and the upgrade is complete? There isn't a progress bar or another screen Im supposed to see?
Cheers
Nas
hanks jwarbutron,
Your procedure works like a charm Thanks once again . Pl let me know how to get original #D phone pad interface
Unfortunately it didn't work for me, I left my phone plugged in for about 4 hours, it still just displayed the checking page, and now my phone wont start. Switching it on, I see some text in portrait mode saying usb at the top, and v1.00 at the bottom.
I'll dig around this forum to see if I can find a solution.
Nas
Third attempt looks to be good though! Got the progress bar, upgrading now... :lol:
Nas
Just updated last night, and good grief the imate ROM is so much better.
Its much smoother, quicker and generally a much more pleasant experience.
Very much recommended to anyone who who has the Exec.
Cheers
Rich
Well, my upgrade completed, but I still get the portrait page with USB at the top and v1.00 at the bottom. The upgrade said it had completed successfully, is there a step I have missed?
Cheers
Nas
Im starting the upgrade again to see if I missed anything, I have the screen with the progress bar, so I know its doing *something*.
While its going, any ideas what I might of missed?
Thanks
Nas
Hi Guys Just got the latest o2 Universal rom on the machine and everything was fine apart from no SmartDial in the phone function and seems no o2 Active apps in the programe files. No worry about the o2 bloatware but want smartdial back, and without doing the upgrade again if possible ie wiping the machine after putting all my apps back on...any ideas?
Cheers
Andy
i have a wierd problem i had qtek 2020 with wm2003 and german rom, so i upgraded it to wwe wm6... it worked fine for a day, but msn refused to sign in so i installed windows live... since then it shows "no service" and phone and contacts apps fail to start but sms and gprs work fine...
i tried flashing it to wm6.1 and it works the same... i noticed one thing: after first upgrade, all data was gone but after this one all my sms and stuff (notes, etc.) were there... at this point i notice that there's one sms that can't be deleted or marked as read
also after every flashing, when i restart phonr, i get bunch of errors for apps that were in startup of previous wm...
when i checked device information, there wasn't anything standing for extrom version so i guess that's the problem but can't find any extrom upgrade files :|
thanks in advance
Which version of WM6.1 did you install and did you follow all instructions when installing?