Hi all, I need a help how can I downgrade thw Wallaby 5.17 which so pain in the ass back to wallaby 5.15?
I get the nb0 file which I got from xdatools. But after i tried to reflash using SD nethod nothing happen. So I else I have to do?
I just want to downgrade from rom 4.00.16 back to 4.00.11. I ve already use the Wallaby patch.nb2 but I only could get through until the menu restore from Sd which I think that is the only menu I should choose to get the new nb1 file from SD. But nothing happen eather. It only running back to it main manu each time I replace the SD card which contain the nb2 files with the nb1 file.
Thanks in advance
I need to restore my Polaris to the Default ROM that comes with it. The pin that holds the micro SD card in place is broken and I need to return the phone for service. I had the German ROM on the phone.
Does anyone know how I can restore the fone to Factory settings and ROM?
Help
http://forum.xda-developers.com/showthread.php?t=381600
Download the original rom, and install it as cooked roms
After restore the original spl.
How do I restore the original spl?
I downloaded the ROM now but the original SPL is what??
See second post in the suggested HOW TO thread...
Hi,
I have a little issue: I HSPL my HD2 no problem with . It's just my phone have a hardware problem & I wanna go back to Original SPL 1.42000. I found the original rom made for my branded handy
extract and rename the .nbh
format sdcard in proper format.
neither in sync nor in bootloader mode. Invalid vendor ID. Rom Upgrade issue for me.
How can I uninstall the HSPL ?
PS/ I tried all words given by bepe and other's concerning issues. I didn't found it. I must sent back my phone soon for warrantly reason...
Did you try to install the ROM from HTC website or did you find an Orange specific ROM?
It is an orange specific rom. cause it is a branded handy.
I even try from HTC website one but no satisfaction. I think it is normal by this one ?
I have a non branded "german" device.
I decided to go back from the HSPL to the stock SPL.
I wanted to flash with the Turkey 1.61 rom to have after this procedure the newest radio 2.07 on it.
I have followed the steps from bepe
But my SD card has a "goldcard" file on it.
Go to the HSPL thread and see my post #383
http://forum.xda-developers.com/showthread.php?t=611433
I have noted down all outputs during flashing.
At least I would give it a try and use a "Goldcard" to get back your original rom.
Hope it helps & Good luck!
dingolino
doudaix said:
Hi,
I have a little issue: I HSPL my HD2 no problem with . It's just my phone have a hardware problem & I wanna go back to Original SPL 1.42000. I found the original rom made for my branded handy
extract and rename the .nbh
format sdcard in proper format.
neither in sync nor in bootloader mode. Invalid vendor ID. Rom Upgrade issue for me.
How can I uninstall the HSPL ?
PS/ I tried all words given by bepe and other's concerning issues. I didn't found it. I must sent back my phone soon for warrantly reason...
Click to expand...
Click to collapse
In addition to what the previous poster described:
One can definitely flash the original ROM using the SD card to uninstall HSPL.
Many people do it by accident...
That being said, one question: Are you sure you have the correct ROM file?
You know, the error you mention only arises if you have to answer "no" to that question.
doudaix said:
Hi,
I have a little issue: I HSPL my HD2 no problem with . It's just my phone have a hardware problem & I wanna go back to Original SPL 1.42000. I found the original rom made for my branded handy
extract and rename the .nbh
format sdcard in proper format.
neither in sync nor in bootloader mode. Invalid vendor ID. Rom Upgrade issue for me.
How can I uninstall the HSPL ?
PS/ I tried all words given by bepe and other's concerning issues. I didn't found it. I must sent back my phone soon for warrantly reason...
Click to expand...
Click to collapse
SD card should be formated FAT32. The original one is FAT16
What does it exactly mean: "One can definitely flash the original ROM using the SD card to uninstall HSPL"
We can uninstall HSPL by loading the .nbh from the official ROM from htc website from fat32 formated sd card ?
If the answer is yes, I have done it many times but no satisfaction.
Yes I use the proper and official htc and/or orange .nbh.
How to get out please.
tictac0566 said:
In addition to what the previous poster described:
One can definitely flash the original ROM using the SD card to uninstall HSPL.
Many people do it by accident...
That being said, one question: Are you sure you have the correct ROM file?
You know, the error you mention only arises if you have to answer "no" to that question.
Click to expand...
Click to collapse
doudaix said:
What does it exactly mean: "One can definitely flash the original ROM using the SD card to uninstall HSPL"
We can uninstall HSPL by loading the .nbh from the official ROM from htc website from fat32 formated sd card ?
If the answer is yes, I have done it many times but no satisfaction.
Yes I use the proper and official htc and/or orange .nbh.
How to get out please.
Click to expand...
Click to collapse
looks like the good way. is the nbh file calla LEOING.nbg in your SD card ?
doudaix said:
What does it exactly mean: "One can definitely flash the original ROM using the SD card to uninstall HSPL"
We can uninstall HSPL by loading the .nbh from the official ROM from htc website from fat32 formated sd card ?
If the answer is yes, I have done it many times but no satisfaction.
Yes I use the proper and official htc and/or orange .nbh.
How to get out please.
Click to expand...
Click to collapse
If you do all steps in the correct way, flashing the original nbh with the SD card will definitely overwrite HSPL with stock SPL.
It has happened to quite a lot of people who were not aware of the fact that this happens when flashing a stock ROM with this method.
When you get a wrong carrier ID error message, you don´t have the right ROM, as the device will only allow to flash ROMs with the correct CID, be it HTC or operator stock ROMs.
Did you check the SPL version after the process with the SD card? If it says 1.42.0000, why don´t you try flashing with the original RUU?
yes confirm
tictac0566 said:
If you do all steps in the correct way, flashing the original nbh with the SD card will definitely overwrite HSPL with stock SPL.
It has happened to quite a lot of people who were not aware of the fact that this happens when flashing a stock ROM with with this method.
When you get a wrong carrier ID error message, you don´t have the right ROM, as the device will only allow to flash ROMs with the correct CID, be it HTC or operator stock ROMs.
Did you check the SPL version after the process with the SD card? If it says 1.42.0000, why don´t you try flashing with the original RUU?
Click to expand...
Click to collapse
I confirm: it happends to me: when I flashed the 1.61 HTC official rom from my SD, it replace the HSPL by the original SPL of HTC.
hi all, just want to share..
stock spl is 1.42 and after hspl 1.42hspl or 1.42.6666 if i'm not mistaken.
if to unsintall this hspl, i use flash using sd card method and it will re write radio and spl back to 1.42.
i also using turkey stock rom, but we cannot flash turkey stock rom using sd card method as it will rewrite spl and will give you error. wrong region. if this happen, in 3 colour mode, run you hspl. when it restart, make sure you push volume down button to get back in tricolour mode. if you not pushing vol down button, it will also boot in tricolour but hspl wont work, happen to me, spl back to 1.42.000. the flash using custom ruu.
just sharing with you guys.
Steve0007 said:
looks like the good way. is the nbh file calla LEOING.nbg in your SD card ?
Click to expand...
Click to collapse
It should be LEOIMG.nbh.
dont forget you might want to use MTTY to do task29 to format the device instead of CustomRUU.exe
tbh you can probably use the RUU from HTC if you have HSPL anyway.
p.s. yeah LEOIMG.nbh - LEOING.nbg made me smile - finger-twister
Okay I have tested restoring SPL1.42.0000 on a vendor-id'd phone.
Tried 2 ways of formatting the SD card:
a. formatting the sd card to FAT32 via Diskdrive mode connected to pc
b. Formatted in HD2 using onboard utility in HD2.
Tried 2 images but not the vendor-id image since I do not have that image.
a. Vendor ROM but in different language
b. Stock ROM HTC
Tried 2 ways of changing SPL back to 1.42.0000
a. Reset + vol down shows a 1 second message "Checking.", after that it immediately goes to the blue-green-red bootscreen showing bootloader 1.42.HSPL
b. From bootloader connect USB to pc and flash using stock RUU.
All combinations of above I can not restore SPL. Must be because HD2 requires correct ROM image + correct vendor-id.
Is there possibly a way to remove HSPL in some way without the original vendor image? Goldcard?
Check out my video on reverting back to stock spl
Its in my signature.
Not sure if its the same for locked devices though, just have a look
[★] said:
Check out my video on reverting back to stock spl
Its in my signature.
Not sure if its the same for locked devices though, just have a look
Click to expand...
Click to collapse
very good manual that is. In video manual is exactly the procedure I did. However the vendor-id'd HD2 won't get to the point where the image can be flashed. It gets to the point up to 1:37-1:38 in your video where the word "Checking..." blinks in an instant. After that it returns to bootloader screen.
So no luck yet
htc12345 said:
very good manual that is. In video manual is exactly the procedure I did. However the vendor-id'd HD2 won't get to the point where the image can be flashed. It gets to the point up to 1:37-1:38 in your video where the word "Checking..." blinks in an instant. After that it returns to bootloader screen.
So no luck yet
Click to expand...
Click to collapse
Oh sorry man
Goldcard also tried and no luck.
Every time I reboot to bootloader it gives the colored screen, proceeds to white screen with blue letters, in an instant shows: "Loading..." ..followed by: "Checking..." ..and then returns to colored bootloader main screen.
edit:
I keep thinking whether it is normal or not that the white screen doesn't show any kind of confirmation that it did actually find any nbh file whether it is valid or not. Maybe it just exits when the nbh is not valid, that may be the case.
However I have now ran the routine a whole lot of times and make zero progress.
Maybe better continue the search for the correct ROM to flash with.
just try one of the official roms posted in the official roms thread. don't try 1.61 - only 1.43/48
I have tried all official roms posted including 1.43 and 1.48 and up without success. The bootloader wouldn't go further after having checked the SD card contents. It did not work at all.
Finally now I bricked (I hope temporarily) my HD2 by trying to install the latest official 2.02 from the RUU.
Strange things have happened here.
I had earlier copied an 148 or so nbh to sd card. Bootloader would't work out as explained in posts above. So after all (with card with 148 nbh still inside) I figured it was time to check what ROM 2.02 would do, since I believe it would overwrite all SPL including HSPL since it is a v2 SPL. At least I hoped.
When I opened the RUU, it did reboot the phone as it is supposed to do with RUU.
Few things happened:
a. The phone booted in bootloader and showed me the white step screen which indicated there was a nbh about to be flashed. This was the nbh on the card!
b. The RUU errored with error 260 that the connection was lost. I have never lost a connection, must be because file on sd card took control.
c. Since connection was lost and the phone wanted a flash from the sd card I pressed vol up to continue update. it did start updating... but at about 9% I got a big triangle /exclamation mark, and HD2 stopped updating.
Reboot. Guess what??? SPL 1.42.0000 in bootloader now. From the nbh on the card.
But NO boot, NO radio .... After all I managed to destroy phone and HSPL.
Had to goldcard my way back in. However, problem solved!
Hi
I have real problems using the exe files from my pc to flash a rom.
I'm trying to remove the t-mobile pink cirle branding and been advised the only way to do this is flashing an unbranded stock rom.
I have hpsl installed, can anyone advise if this is possible and also whether stock roms are available in LEOIMG.nbh format?
THanks
possible. but pls be cautious about stock SPL version.It will overwrite HSPL & make sure it is downgradeable to bepe HSPL. it is better to rip splashscreen only & rebuild LEOIMG.nbh.
adama1980 said:
Hi
I have real problems using the exe files from my pc to flash a rom.
I'm trying to remove the t-mobile pink cirle branding and been advised the only way to do this is flashing an unbranded stock rom.
I have hpsl installed, can anyone advise if this is possible and also whether stock roms are available in LEOIMG.nbh format?
THanks
Click to expand...
Click to collapse
You can get rid of the first bootscreen on another way, by just flashing a seperate nbh file (on the same way you can change the radio). Search the 2.09 rom thread in this forum for a way to do this (really simple).
Perfect, thanks, i was worried flashing another .nbh would restrict which rom i could use but sounds like it flashes a different part of the rom
for more info look in here and you can find video to how to doit
http://forum.xda-developers.com/showthread.php?t=621930
Ever since I flashed to WP7, it doesn't allow me to go back to Winmo 6.5, or any other ROM. It says Invalid ID every time I try to update, or change ROMS.
I'm really a noob so, sorry for the trouble guys, help would really be appreciated.
your easiest way would be through flashing a winmo 6.* rom by SD card.
Just extraxt a rom from htc.com and rename the *.nbh to LEOIMG.nbh and put that on the root of a (preferably clean) SD-card. Boot into bootloader ( reboot + volume down button) and it will ask you wether you want to flash/install rom from sd-card. ...follow instructions and you are back to base.
JJP981 said:
Ever since I flashed to WP7, it doesn't allow me to go back to Winmo 6.5, or any other ROM. It says Invalid ID every time I try to update, or change ROMS.
I'm really a noob so, sorry for the trouble guys, help would really be appreciated.
Click to expand...
Click to collapse
you may be flashing 3.14 roms ... try old roms .... 3.14 roms are not supported every country ....
Dust2Dust said:
your easiest way would be through flashing a winmo 6.* rom by SD card.
Just extraxt a rom from htc.com and rename the *.nbh to LEOIMG.nbh and put that on the root of a (preferably clean) SD-card. Boot into bootloader ( reboot + volume down button) and it will ask you wether you want to flash/install rom from sd-card. ...follow instructions and you are back to base.
Click to expand...
Click to collapse
Well I've alot of ROMS. I also tried to update MAGLDR v1.12 to v1.13 so I can get android up and running.
I also tried to SD card and it never asked me if I wanted to boot from there...
Sometimes I wonder how people get themselves into this kind of situation...
And also, some hints and tips are kind of "incomplete"...
Maybe you´re basically performing the right steps, but if you get the wrong ID error message, this can have a few reasons:
1) Your device is branded - get the correct operator branded stock ROM
2) Your device is localized (Europe, Asia, Australia, US) - get the correct ROM for your area
Since you have HSPL on your device, it is not necessary to flash via SD card to go back to WinMo 6.5. You could actually put your HD2 into the standard bootloader mode, plug it to the PC via USB cable, and flash using the RUU tool you prefer (either stock or custom ROM).
If you want to flash an Android NAND, the procedure is slightly different, but I won´t go into this at this stage...