Hello
can anyone tell me how can i do start the buletooth file transfer on my tmobile mda
do let me know
Thanks for ur help
Right click the file you want to send, click beam file, you will see infrared and searching. searching will look for the bluetooth devices and list them. when the device you want to send to is found click on it.
thanks for the reply i will check it out and will get back to you with the results
THanks
You need to turn on your bluetooth first and then beam. Else it will search only the IR port.
The best i could suggest is to use Resco explorer which has enhanced bluetooth support and shows the progress bar of the sending file.
www.cartystudios.com --->visit for more Pocket PC stuffs
are u guys trin to suggest that i should keep the bluetooth on
and then beam but it will look for all the bluetooth devices in the area nice
i will get back to you guys with the results
Thanks
Related
HELLO
Uh..HELP!!! My wireless keyboard is able to be paired up with my JAM..EXCEPT that it won't work, or..If it does, it doesn't show it. On the bluetooth thing it shows "KEYBOARD" and..pairs up..EXCEPTING..That when I go into PocketWord and click on the option foyr "Smart Keyboard" It loads a bit..and then doesn't allow me to access wording from the keyboard AHHHH...Would it be because of the battery? Or something? The Bluetooth LED on the keyboard DOES flash when I pair the two up...Mmmm...
Anyway, SOMEBODY HELP...
Reply if you have any thoughts...PLEASE??
Thanks.
Ta.
What keyboard are you reffering to?
I don't think I can give u the ultimate answer..... but here some stuff u can try..
1. try to install bluetooth tools... it might help a little..
2. make sure u have the latest ROM for ur device
3. after all the jam uses Microsoft Bluetooth Stack... and it suck... so in most of the cases.. it's the stack's problem :evil:
there is a stack called Bluesoleil Stack... u can give a try.. it's all in this topic
http://forum.xda-developers.com/viewtopic.php?t=18537&sid=7a83fc9780612b52e882c1e6e2ac348d
4. my suggestion for u.. it to use Remote Keyboard for Pocket PC ... which is a freeware and very good for ur need.
http://www.trancreative.com/rkb.aspx
cheers
This is a crack for the well know BlueSoleil stack...
all you have to do is to replace the original file with this one.
the file is located in \windows
all credits goes to DR.YAR in mobile4arab.com
I must say... Piracy is against the law, so if u like the program, buy it.
Neither I or DR.YAR are responsible for you downloading this file..
I am not using this file coz I don't use bluetooth that much...and the M$ stack is more than enough for me, but for those who are really in great need for the PAN profile, this would help.
cheers
See http://forum.xda-developers.com/viewtopic.php?t=18537 re why this might be needed.
V
Forgive me for not reading through the other BlueSoleil thread, but what's the advantage of this stack over the M$ stack on the JAM?
Does it provide an Audio Gateway for the headset (i.e. Voice Command over Bluetooth, etc.)?
Hi Duke, perhaps Im blind but I couldnt find any crack file in your article. Will you pls. help me? Thx.
indust3 said:
Hi Duke, perhaps Im blind but I couldnt find any crack file in your article. Will you pls. help me? Thx.
Click to expand...
Click to collapse
Are you logged in?
Hi Duke, perhaps Im blind but I couldnt find any crack file in your article. Will you pls. help me? Thx.
Click to expand...
Click to collapse
I can see the file... :!:
BTW, u have to be logged on in order to see the attachment.
BeyondtheTech said:
Forgive me for not reading through the other BlueSoleil thread, but what's the advantage of this stack over the M$ stack on the JAM?
Does it provide an Audio Gateway for the headset (i.e. Voice Command over Bluetooth, etc.)?
Click to expand...
Click to collapse
first, sorry for not replying so fast... I didn't have much free time lately.
as for ur question...
According to their web site, supported profiles are:
PAN, OPP, SYNC, LAP, DUN, FTP, FAX, HID, SPP, HCRP, BIP, Headset, AV
Click to expand...
Click to collapse
as for the headset question:
this is the summary of the topic
the stack DOESN'T support HEADSET OR HANDSET PROFILE
Click to expand...
Click to collapse
it doest support A2DP either .....
the stack isn't that much stable, for it was not designed to work with the magician...
it shows the sender's name BTW.
I hope this will help.
I've installed the BlueSoleil stack without any problem on my MDA Compact. The problem is that neither File Explorer nor Resco File Explorer seem to be compatible with this stack. I cannot send files to another phone using this stack from these programs.
The ony way I found to send, recieve files is through FTP but not all phones support this profile. Is there a solution to this?
And when Bluetooth is switched on, the blue LED does not blink either!
kta said:
I've installed the BlueSoleil stack without any problem on my MDA Compact. The problem is that neither File Explorer nor Resco File Explorer seem to be compatible with this stack. I cannot send files to another phone using this stack from these programs.
The only way I found to send, receive files is through FTP but not all phones support this profile. Is there a solution to this?
And when Bluetooth is switched on, the blue LED does not blink either!
Click to expand...
Click to collapse
yeah.. all of the things u mentioned are true.
1. FE and Resco are not compatible....
I don't know Why FE is not.. But resco is not compatible for sure.. it supports Widcomm and M$ only, maybe we can contact the developer in order to make a support for the Stack.
The only way - I know - to send using the program is though the manager i self.
2 as for the Blue LED disappearing... well I guess this was reported in the main topic about this Stack...
no solution AFAIK.
Yes I see, sorry. But as I noticed that crack was dedicated to WIN CE. Am I right?
crack seems not working , i replace the exe file in program files and it's doesn't work
orel said:
crack seems not working , i replace the exe file in program files and it's doesn't work
Click to expand...
Click to collapse
AFAIK.. this file works well..
BTW...make sure u have the right version of the stack..
this is a link for the trial version of the stack
http://www.ivtcorporation.com/download/downloadfile/Bluesoleil_CE_Eva_7.30.zip
How to install ... ?
Hi,
Just trying to use the bt stack provide by BlueSoleil... Have ayone of you experienced problems when installing the application on the Magician ? I am not able to install it ... simply I don't know why ...
Any help much appreciated,
10X,
R
hello to all,
is it worthwhile to install this Sw or is it better the one that brings??
What problems have you found?'
greetings
Just trying to use the bt stack provide by BlueSoleil... Have anyone of you experienced problems when installing the application on the Magician ? I am not able to install it ... simply I don't know why ...
Click to expand...
Click to collapse
yes.. u might get some problems... after the installation...
just leave ur PDA off for some time , and it will work by it self...
is it worthwhile to install this Sw or is it better the one that brings??
Click to expand...
Click to collapse
as far as I know, this stack is not stable that much... u can't send from File Explorer or Resco FE as well.....the only way to send files is through the BT manager it self...
by advice.. is keep using the M$ stack....
Does this stack allow you to hear system sounds through the Bluetooth headset (i.e. listen to audio files through a bluetooth headset)?
The JAM would be perfect if it could I hate carrying around a bluetooth headset and the headphones.
Thanks,
Yo gang,
Just wondering a few things about the atom, and hope someone can answer my questions....
1: Can the atom send messages, pics and other material via bluetooth??? I can only see an option to beam
2: Can the atom do loudspeaker phonecalls??? You know answer the phone than go to loud speaker???
3: How the hell do i disable sms plus so my text messages are sent to my normal text inbox... sms plus really blows, but i like the added features in o2 plus...
Hope someone can clarify my questions, or even point me in the right direction to some after market software apps...
Much respect and thanks..
Matt
Firstly I don't have a Atom but I have a IIs which is upgraded to WM5. But all the things I suggest should be similar on all devices.
1. Bluetooth - If you search on Google you should be able to find something which will do what you want it to do. Try http://www.pocketgear.com/ and http://www.handango.com/home.jsp?siteId=1
You should find something, sorry I can't help more. But it is very possible to do it.
2. Loudspeaker - This should be a easy on just hold the talk button down for a few seconds then to turn speaker phone off hold the talk button for a few seconds.
3 SMS Plus - I am sorry but all I can suggest is that you uninstall it and just reinstall 02 Plus. It can be found here http://www.seeo2.com/product/XdaIIi/template/O2Plus.vm I think it leaves out 02 SMS Plus let me know how you go.
cheers man..
very cool to know the atom does have these functions, and saves me reading the damn destruction book.. i will post back another reply once i am home from work, and have done a little investigation....
thanks
Matt
about sending the stuffs through bluetooth... first ensure that ur bluetooth is switched on(preferably discovery mode if u want to rcv files too.) Also worth mentioning, please c to it that the bluetooth device where u want to send the file as its bluetooth on and in discovery mode. Now tap and hold on the file(from file explorer) that u want to send. choose beam option. wait for the target device to be found and appear on list. tap on it to send. Voila!!!
please note that some device allows sending/receiving through pair only. bloody bluetooth... has to be blue!!!
I have a MDA compact II, and my built in memory is full. When i try recive a file via bluetooth it still trys to save it into the built in memory instead of my Storage card.
I have herd i can change this somewhere in the registry. Is this possible and how?
PS: Also i would like to change my flash screen to a different picture. If anyone can point me in the right direction that would be great. Thanks
Hi
look at MDA compact II a2dp at the bottom for BCHS_FOR_POCKET----
You can change the folder
jaaphooi said:
Hi
here is a other file for the mda compact 1-2/s100/s110/jam/jam128- try it may work better.
Click to expand...
Click to collapse
Is this the thing you were talking about? http://forum.xda-developers.com/showthread.php?t=282968&highlight=MDA+compact+II+a2dp
Hi
Sorry
Forget my post I thought it was windows 2003 2e but this is the 2005 .
If it helps, here is some information.
I am using an unlocked MDA Compact II with Windows Mobile 5 on there. To turn my bluetooth on i need to go into a comms manager.
UPDATE: that file i tried screwed my phone up. once i did a soft reset or something, the sound no longer worked. Had to hard reset to fix that but now ive lost all my GPRS settings . If there is another way i can set the location please let me know.
Hi
I have here a bluetooth sjortcut for botomtray.
Thats usefull. I can now open my bluetooth from the shortcut. But i still cant send the file to my Card instead. Is there a different file maneger or something that when i recivre an incoming beam, it asks me where i can save it?
Just to say, the file i used before did work, and i could change location. The only problem was if i turn the device off and on again, i have no sound.
The first is A2DPSwitch. I wrote this a while ago and posted in the Kaiser forum. Posting it here because I made some changes and think some here might find it useful. It simply toggles the connection to an A2DP headset. Simply run the exe and if connected it will disconnect. If disconnected it will connect. The new changes are that now it checks to make sure BT is on first, and turns it on if it isn't. The other is a fix. Before if there was a non A2DP headset and an A2DP headset in range sometimes it wouldnt work. Now it always finds the A2DP headset. Useful for those pesky car head units that don't automatically connect A2DP. The cab will place a shortcut in the start menu.
The second is BTKeepAlive. An exe that runs in the background and checks to make sure BT is on and turns it on if it isn't. The checking interval in milliseconds can be modified by changing HKCU\Software\JKing\BTKeepAlive\Interval (DWORD). The default value is 60000 (one minute) and if that reg value does not exist 60000 will be used. BTKeepAlive 1.1 can now also keep discoverable mode on. Set HKCU\Software\JKing\BTKeepAlive\KeepVisible (DWORD) to 1 and BT will be kept on invisibility mode. The default is 0. I know there is a mortscript written to do this but I would prefer not to leave this up to a mortscript. Also, BTKeepAlive will automatically check immediately after the device is woken from sleep. Run BTKeepAlive.exe to start it and run BTKeepAlive.exe again to terminate it. The cab will place shortcuts in the start menu and in startup, and will create the reg value.
While you're at it, why not assign A2DPSwitch to the long press of a volume key?
[/Shameless plug]
Now back to working on X1BC. Cheers!
Thanks. It's a must for buggy HTC bluetooth driver across all their devices. My Kaiser and X1 always drop A2DP connection after phone call, and it would not happen on my Asus P525 on Eten M600
why is it after i have installed it, it doesnt seem to run? it just show a blank icon and doesnt do anyhting. its for both programs.
cksdud89 said:
why is it after i have installed it, it doesnt seem to run? it just show a blank icon and doesnt do anyhting. its for both programs.
Click to expand...
Click to collapse
The programs do not have interfaces. BTKeepAlive will just run in the background. click on it again and you will get a notification that it is exiting. A2DPSwitch toggles and A2DP connection. Do you have a wireless stereo headset?
jackleung said:
Thanks. It's a must for buggy HTC bluetooth driver across all their devices. My Kaiser and X1 always drop A2DP connection after phone call, and it would not happen on my Asus P525 on Eten M600
Click to expand...
Click to collapse
I thought it was just that the Windows Mobile bluetooth stack just sucked at A2DP. Did either of those devices use the broadcomm/widcomm bluetooth stack?
JKingDev said:
I thought it was just that the Windows Mobile bluetooth stack just sucked at A2DP. Did either of those devices use the broadcomm/widcomm bluetooth stack?
Click to expand...
Click to collapse
P525 use Widcomm but M600 use MS stack as well.
I have just purchased an X1 and have the problem with bluetooth turning off constantly. I have downloaded the .cab files and unzipped them, but the setup file is an .xml file and there are no instructions.
I am prety new to this stuff and dont fully understand.
Could someone please give me some setup instructions.
Thanks
IWW20LSS41 said:
I have just purchased an X1 and have the problem with bluetooth turning off constantly. I have downloaded the .cab files and unzipped them, but the setup file is an .xml file and there are no instructions.
I am prety new to this stuff and dont fully understand.
Could someone please give me some setup instructions.
Thanks
Click to expand...
Click to collapse
A cab file is an installer that you can run directly on your PPC. Just copy the cab file to your X1 using Active sync or by copying it to your storage card and open it on your X1 using the file explorer.
Thanks JKingDev, the Keep Alive is a real improvement for me!
BadTasteUK said:
Thanks JKingDev, the Keep Alive is a real improvement for me!
Click to expand...
Click to collapse
Glad that I could help.
Thanks JKingDev for such a useful tool like btkeepalive!
i love it!
Now I have a question:
are you able to expand this useful tool for the function that it keeps alive the visibility of bluetooth too?
because after using wifi, my bluetooth toggles automatically invisible, but i need visibility always to use bt with my car stereo handsfree...
i hope you could help me
primus.interpares said:
Thanks JKingDev for such a useful tool like btkeepalive!
i love it!
Now I have a question:
are you able to expand this useful tool for the function that it keeps alive the visibility of bluetooth too?
because after using wifi, my bluetooth toggles automatically invisible, but i need visibility always to use bt with my car stereo handsfree...
i hope you could help me
Click to expand...
Click to collapse
That is strange that you must keep bluetooth on visible for your head unit to connect. Sure, I will add a registry value "KeepVisible". If the value is 1 btkeepalive will keep visibility on.
Ok, version 1.1 uploaded. Set HKCU\Software\JKing\BTKeepAlive\KeepVisible (DWORD) to 1 and BT will be kept on invisibility mode. The default is 0.
Hey JKingDev,
great work!
I've already tested it. I changed the DWORD to 1 and now it keeps BT visible
Thanks a lot!
Great set as usual JKing
i really like your apps, installing almost all of them on my phone
Thanks mate
Hi,
Thank you for your great work, but may i know how am i able to remove your program as your program doesn't show in the program list when im trying to remove it. Thank you.
primus.interpares said:
Hey JKingDev,
great work!
I've already tested it. I changed the DWORD to 1 and now it keeps BT visible
Thanks a lot!
Click to expand...
Click to collapse
No problem, glad it is working for you!
anaadoul said:
Great set as usual JKing
i really like your apps, installing almost all of them on my phone
Thanks mate
Click to expand...
Click to collapse
Thank you for the support!
FenomX said:
Hi,
Thank you for your great work, but may i know how am i able to remove your program as your program doesn't show in the program list when im trying to remove it. Thank you.
Click to expand...
Click to collapse
Hmm, I am really not sure why that is. It should be in add remove programs as "Jonathan King's BTKeepAlive". How did you install it? Did you manually run the cab or did you use something like UC to install? To manually remove, stop the program, delete the shortcuts from \Windows\Startup and from \Windows\Start Menu\Programs, delete the program from \Program Files\BTKeepAlive, and delete the reg key HKCU\SOFTWARE\JKing\BTKeepAlive.
confirmed with my x1 too btkeepalive keeps on bluetooth all the time!!!! great work!
JKingDev, may i make a request ?? hmmm ! could you create a deamon that when the handsfree from your car connects the deamon would activate a2dp ??
this would be a killer deamon !!! like you said that car a2dp is a pain ...
This script works perfectly, thank you so much! My HTC Diamond disconnects bluetooth randomly when paired to my BMW bluetooth so hopefully it'll work as well in my car as it does when I toggle off bluetooth manually. One quick question, if I set the dword to 1000 (1 sec) will that have any impact on my battery? I'm hoping not as this is such a tiny program but I really have no idea.