Hi,
Ok after the breakthrough regarding the ROM updates for QTEK 1010 and it was first revealed here on xda-develpers.com we have some new options in the QTEK now one of them is the WM.
Did anyone manage to use the Wireless Modem via IRDA because its not working the first thing is that the computer is seeing the device on infrared but not as a modem and i dont have an *.inf file to indentify it. If anyone managed to use his QTEK or any XDA via infrared to connect his laptop to the internet using GPRS plz explain how.
thanks
to irda on win2k/xp
visit http://www.ircomm2k.de
Install software at own risk, but this exposes a permanent COM port using IrDA. Also nukes Wireless Link in the process.
Setup a manual modem, select the COM port from above, presto!
Ummm its a good idea but i am not sure if this will work on Windows XP... what do you think?
it does
it does, but as with all things apply with care
Tried it
I tried this a long time ago, IRCOMM2k works on XP but the problem is that i couldn't figure out how to setup a IR generic Modem working on that port.
Yes please, this is a good article,
I installed the ircomm2k on my XP, but how to configure the connection from my laptop to connect to the internet via my XDA PDA as an external modem?
to setup xda as a modem
1. Install Ircomm. note which com port is assigned as permanent.
2. Add new modem: standard 33600
3. Select com port from item 1 as the com port of choice
4. Edit modem profile in devices settings, in Extra Initialisation Commands add AT+CGDCONT=1,"IP","apn name"
5. VERY IMPORTANT: set flow control to OFF
6. Set port speed to 115200 ONLY
Set up a Mobile Web net connection as per your operator
Select your above modem
Align xda with irda port; select start on Wmodem app
Double click Mobile Web connection.
Surf. It's OK but not as fast as a GPRS card.
OR you can wait for O2 to eventually post some instructions...
Thank you very much for your feedback
I did all what you asked me to do, but its not working it gave me an error message:
Error 692: There was a hardware failure in the modem (or other connecting device).
I replaced AT+CGDCONT=1,"IP","apn name" BY AT+CGDCONT=1,"IP","apn01" same as Im using in my PDA. Am I right?
Something I didn't understand in your reply:
(Set up a Mobile Web net connection), you mean a normal dial-up connection?
One more thing, what do you mean by (select start on Wmodem app)?
Do I have to do anything in my PDA before I connect from my laptop? or do I have to do anything in my PDA configuration or connections settings?
Please help me, I want to use the Gprs on my laptop, no need to pay for 2 services, one for the PDA and other for my laptop
Best regards, Ali Alsaffar [email protected]
"select start on Wmodem app" - this means go into the Wireless Modem application on the xda, select IrDA (if thats now you are connecting) and then tap the Start button.
When you've done that, go the the DUN connection on laptop and connect as you normally do.
Unfortunatly I dont have "Wireless Modem application" on my XDA from where I can get it?
I thought the command was:
AT+CGDCONT=1,"IP","apn name","",0,0
I don't know about the command but what Im sure about it is that wModem application is mandatory, so from where I can get it?
Re: to irda on win2k/xp
guest said:
visit http://www.ircomm2k.de
Install software at own risk, but this exposes a permanent COM port using IrDA. Also nukes Wireless Link in the process.
Setup a manual modem, select the COM port from above, presto!
Click to expand...
Click to collapse
HI. I HAVE AN OLDISH LAPTOP RUNNING WIN ME. WILL IRCOMM2K WORK ON ME OR IS IT INTENDED (AS NAMED) FOR WIN 2K AND XP ONLY?
From: Helpdesk (source O2) Sent: 30 May 2003 13:54
Subject: RE: wireless modem
Hi
The wireless modem will be available in the next ROM update from the xda team. I understand that this will be released in the next couple weeks - they are in the final stages of testing.
We will highlight the new ROM on our homepage with a link to the downloadable files.
regards
source O2
Re: to irda on win2k/xp
Anonymous said:
guest said:
visit http://www.ircomm2k.de
Install software at own risk, but this exposes a permanent COM port using IrDA. Also nukes Wireless Link in the process.
Setup a manual modem, select the COM port from above, presto!
Click to expand...
Click to collapse
HI. I HAVE AN OLDISH LAPTOP RUNNING WIN ME. WILL IRCOMM2K WORK ON ME OR IS IT INTENDED (AS NAMED) FOR WIN 2K AND XP ONLY?
Click to expand...
Click to collapse
Hmm... really good question. ME is an update to 98 as I recall, but a clunky upgrade.
Way to check: Setup a new modem. When it asks which COM port you wish to use, if you can select Virtual Infrared COM port then it should work fine.
Get the instructions at www.o2.co.uk/xda on Help and Support.
Anyone know what the T-Mobile USA network connections for using WModem are?
For UK O2 they are:
Primary DNS - 193.113.200.200
Alternate DNS - 193.113.200.201
User name - O2Web
Password - password
Has anyone used wmodem in the US with T-Mobile as a service provider?
Thanks,
JP
Qtek as wireless modem
I also have oldish ME Laptop computer. I did exactly as described on O2 support site. It does not work. The modem on laptop immediately disconnects saying it's not responding properly.
I have tried several cooked versions of the 4..00.16 Eng T-Moble and the 4.00.11 ENG WM2003 roms and niether one installs the WModem app. Any ideas why?
I have a T-Mobile version of the PPC, radio stack 6.24
WM with old laptop computer
It worked for me. I could connect my oldish ME notebook computer to internet over gprs using WM in xda. I used the extra string from o2 and just changed the access point name.
It goes as this:
AT+CGDCONT=1,"IP","apn"
It works, but the WM just stops responding the moment you disconnect the connection from PC. The PC waits and waits for the confirmation and then hangs up saying no reponse. But as long as you are connected it works very well.
Don't know if anybody is having the same problem as me.
We have an M$ Exchange server which I use for work. We've not bought verified certificates as we don't need to. WM5 doesn't allow me to install our wilcard certificate onto my MDA Vario. I've tried various methods posted in different forums:
Changing the registry HKLM\Security\Policies\Policies\00001017 from 128 to 144. I also changed 00001001 to 1 and 00001005 to 40 but i dont think that helped.
My certificate is still not recognised!
Anybody have a solution?
Will
willcheng,
If you got W2003 server and Exchange 2003 then you don't have to buy certificates you make your own.
Installing these in WM5 is easy, just copy them to your device and they will be installed after clicking on them.
Please let me know if you have w2003 and Exchange 2003 then I will let you know how to do it.
But if you have an M$ drive on your server I thing you are using Exchange 2000 or 2003 on witch you can add the M drive.
I'm using w2003 with Exchange 2003 and the certificate is working wonderful.
Cheers,
Drifter
You need to install the root certificate not the one that was issued to the Exchange server. What CA issued the certificate for your Exchange server? Install that certificate. If you are using MS Certificate Services you can just go http://<CA Server Name/certsrv and download the root certificate or the chain. You can then just copy them to your device and click on them and they should automaticaly import. If it is not installing then what type of certificate are you trying to install? If it is not X.509 you need to convert it to X.509. Also I had this problem installing on a locked Sprint Phone on WM 2003. I had to use this.
SPAddCert.exe
Hi.
I have installed Intellisync on my device so I could replicate my job email. But the phone keeps rebooting after each sync.
Anyone had the same issue? Or even better, does anyone have a solution for this. It is pretty annoying when my phone reboots 20 times a day. At least...
I am desperately looking for a solution to this as well.
Is there perhaps a setting, that eliminates this reboot?
Why do you use Intellisync? Is it for an yahoo account?
IntelliSync was originally bought for sync'ing a couple of Nokia Communicators directly with our Notes server. But it never really worked...
So I convinced my boss, that a Windows Mobile device would do the job. And it actually does.
I log on to the Notes server, and make a setup for a WM device. Then IntelliSync sends a textmessage with a wap-link for a CAB-file directly to the phone. After installation on the phone, I have a complete Office-package with calendar, contacts, e-mail, etc.
BUT...
The problem is that each time the device has sync'ed, it performs an automatic restart. It can pretty annoying when the device makes 10 restarts, or more, every day.
Upgrade or install Client Patch
What version of the intellisync and client pack are you running? I had this issue on windows mobile devices with a particular version 8 client pack, it was a bug in the windows mobile client install. Nokia released a patch to resolve the issue or you could just upgrade to the latest Server/Client pack which should also do the trick. Info on the patch below, although it says TyTN if i remember correctly it affected my other windows devices as well.
Summary
This is a client patch that resolves a problem with soft resets occurring for the HTC TyTN II (WM) device. This patch is only applicable to Nokia Intellisync Mobile Suite server version 8.0.70.35 (8.0 SP3).
New Features
There are not any new features with this patch only corrections to an identified problem with the Windows Mobile client. Please refer to KB article 1355353 for more information regarding the items which were corrected with this patch.
Requirements
Must have Intellisync Mobile Suite 8.0.70.35 (8.0 SP3) server installed. Please use the following instructions to install the updated client pack to the server:
Stop the Nokia Intellisync Mobile Suite (NIMS) server.
Backup the existing <NIMS HOME>\ClientInstalls\SyncClient\PocketPC2005MTM and <NIMS HOME>\ClientInstalls\SyncClient\Smatrphone2005MTM folders by moving them to another location outside of the <NIMS HOME>\ClientInstalls folder.
Extract the contents of the 8.0.62.2.zip file and copy the patched extracted \ClientInstalls\SyncClient\PocketPC2005MTM and \ClientInstalls\SyncClient\Smatrphone2005MTM folders to the corresponding location on the Nokia Intellisync Mobile Suite server.
Start the Nokia Intellisync Mobile Suite server.
Uninstall and reinstall the Windows Mobile 6 Nokia Intellisync Mobile Suite client to the Windows Mobile devices.
jsplatt said:
What version of the intellisync and client pack are you running? I had this issue on windows mobile devices with a particular version 8 client pack, it was a bug in the windows mobile client install. Nokia released a patch to resolve the issue or you could just upgrade to the latest Server/Client pack which should also do the trick. Info on the patch below, although it says TyTN if i remember correctly it affected my other windows devices as well.
Summary
This is a client patch that resolves a problem with soft resets occurring for the HTC TyTN II (WM) device. This patch is only applicable to Nokia Intellisync Mobile Suite server version 8.0.70.35 (8.0 SP3).
New Features
There are not any new features with this patch only corrections to an identified problem with the Windows Mobile client. Please refer to KB article 1355353 for more information regarding the items which were corrected with this patch.
Requirements
Must have Intellisync Mobile Suite 8.0.70.35 (8.0 SP3) server installed. Please use the following instructions to install the updated client pack to the server:
Stop the Nokia Intellisync Mobile Suite (NIMS) server.
Backup the existing <NIMS HOME>\ClientInstalls\SyncClient\PocketPC2005MTM and <NIMS HOME>\ClientInstalls\SyncClient\Smatrphone2005MTM folders by moving them to another location outside of the <NIMS HOME>\ClientInstalls folder.
Extract the contents of the 8.0.62.2.zip file and copy the patched extracted \ClientInstalls\SyncClient\PocketPC2005MTM and \ClientInstalls\SyncClient\Smatrphone2005MTM folders to the corresponding location on the Nokia Intellisync Mobile Suite server.
Start the Nokia Intellisync Mobile Suite server.
Uninstall and reinstall the Windows Mobile 6 Nokia Intellisync Mobile Suite client to the Windows Mobile devices.
Click to expand...
Click to collapse
This seems to be exactly, what I was looking for. Thanks a lot!
Now I just need to find the zip-file, you're referring to. Do I get that from Nokia?
You need a login for support.nokia.com to download the patch. If i get a chance later on today i'll see if i can upload it somwhere for you to download.
That's brilliant! Thanks!
8.0.62.2.zip - 42.64 Mb
Got it!
You're the best!
Link expired - please repost this file...
Link expired - please repost this file...
tnx in advance
Svedis
Intellisync - file 8.0.62.2.zip
jsplatt said:
8.0.62.2.zip - 42.64 Mb
Click to expand...
Click to collapse
Hi,
My name is Caio, i´m brazillian ( because of this my English isn´t very good ). I´m was reading your post about problem with intellisync in Tytn II. I´m needing of file : 8.0.62.2.zip, but your link isn´t working in Sharedzilla. Can you send me this file, please, you´ll help very much!
Thank you,
Caio
Help Me please...
Hi all
I´m needing of file : 8.0.62.2.zip, but your link isn´t working in Sharedzilla. Can you send me this file, please ?
Thanks in advance.
Regards.
Hey all, I currently run a private file cache server(which is still availible for free to developers FYI) and I would like to know if there is a program for WM6.0/.1 that will allow me to connect to said server...I have tried to simply use an FTP client, but none I have tried work correctly. Any help is appreciated!
PS, heres more info:
Device=Wizard(Cingular 8125 G4, SIM and CID UNLOCKED)
ROM=TNT WM6.1 PRO V.1
Server OS=Windows Server 2003 Enterprise
Hello,
i hope you can help me.
Always when i use a german windows mobile 6.1 rom i can't sync with our exchange server (2007 SP1). Error Code: 85010013
With Windows Mobile 6.0 it works fine, but 6.1 failed. I have tested 3-4 rom's and all have the same problem.
I cant' sync over USB an over UMTS. Both the same error.
Does anybody now something over this problem?
hello, this error means that security policy has not been applied to your profile. therefore you cannot sync any data with xchange server. also it can mean that few windows components is missing in that specific rom. Did you uploaded and installed the certificate from your xchange server? it is file with extension .CER. if not, then ask your local administrator. if the problem still persist, try to directly contact some of the cooks in here, they know about this problem.
bye.
kandalf said:
Hello,
i hope you can help me.
Always when i use a german windows mobile 6.1 rom i can't sync with our exchange server (2007 SP1). Error Code: 85010013
With Windows Mobile 6.0 it works fine, but 6.1 failed. I have tested 3-4 rom's and all have the same problem.
I cant' sync over USB an over UMTS. Both the same error.
Does anybody now something over this problem?
Click to expand...
Click to collapse
sinmae said:
hello, this error means that security policy has not been applied to your profile. therefore you cannot sync any data with xchange server. also it can mean that few windows components is missing in that specific rom. Did you uploaded and installed the certificate from your xchange server? it is file with extension .CER. if not, then ask your local administrator. if the problem still persist, try to directly contact some of the cooks in here, they know about this problem.
bye.
Click to expand...
Click to collapse
yes i installed the certificate. mobile 6.0 works with the certificate perfekt, but 6.1 not.