Related
Hello everyone,
I read all the posts about unlocking and I instored the latest rom 3.17.03 and Downloaded the precious XDAunlock.exe.
Now when I click on the icon, the following message appears:
XDAunlock.exe is not a valid Win32 application.
Any ideas about what the problem could be. Thank you.
Regards.
Frederic.
XDAunlock.exe is meant to run on the device, and not on your desktop.
After a lot of tries, I finaly got the file in the xda and IT WORKED!!
Thanks guys I'ts brilliant.
Hi,
I get the same message. However, this message is not on the desktop but on the XDA2. "Not a valid win32 appliction"
Any ideas? Any help will be greatly appreciated.,
Jupiter said:
Hi,
I get the same message. However, this message is not on the desktop but on the XDA2. "Not a valid win32 appliction"
Any ideas? Any help will be greatly appreciated.,
Click to expand...
Click to collapse
Not 100% sure if it solves your problem, but for XDA 2 there is another tool (xda2unlock) You should take this one....
HTH
Stefan
Stefan, Thanks for that. Where can I get this tool?
Ignore me.. I was using Firefox and the link did not come up.
I ideally don't want to hard reset. I am trying to use that new tool?
Hope you can help :roll:
Sorry, that previous guest was me. I forgot to log in
I have been trying to get the new demo version of IDA to connect to my WM5 Qtek S200 with no luck.
When I click on attach it sends across wince_remote_arm.dll
then I get cannot invoke server.
If I add the reg key in HKLM\Security\Policies\Policies then it will connect and immediatly kill the ActiveSync connection and I have to unplug/replug in the USB cable. It also displays the following message.
irs_recv:An existing connection was forcibly closed by the remote host.
I can however debug .net apps and do the usual active sync transfer files etc.
Anyone have any thoughts on what to try?
Thanks
Pete
I think you have to enable RAPI, there is a cab for it on the forums or on the FTP, search for it, I think it is enable_rapi.cab.
^^ exactly... just run it on the device and it will connect
I have tried the above cab file and unfortunately still no luck.
It still dies when connecting, and the green activesync icon changes to grey and the "irs_recv:An existing connection was forcibly closed by the remote host." messagebox is displayed.
Strangely I can get it to connect to and debug the emulator.
Anyone have any other suggestions.
Thanks
Pete
I use full version of IDA (you can find it on chinese warez sites), ARM debugger extracted from demo version of IDA, cert.SPCS.cab, EnableRapi.cab, and HKLM\Init\RequireCertMods=0.
IDA connects and works.
mamaich said:
I use full version of IDA (you can find it on chinese warez sites), ARM debugger extracted from demo version of IDA, cert.SPCS.cab, EnableRapi.cab, and HKLM\Init\RequireCertMods=0.
IDA connects and works.
Click to expand...
Click to collapse
Uhhmm... which site exactly? And why doesn't it containt the debugger?
i have the same error "irs_recv...." anyone found a solution for it ?
Guybrush said:
i have the same error "irs_recv...." anyone found a solution for it ?
Click to expand...
Click to collapse
Solution is 2 posts upper.
I tried... Installed cert_SPCS.cab, EnableRapi.cab changed registry value but always same message
can you give me your security policies values under
HKLM/Security/Policies/Policies/
Thanks in advance.
I'm trying to run the IDA debugger on a Cingular 8125. It gives me the exact same error.
I have these values in the registry:
HKLM/init/BootVars/RequireCertMod = 0
HKLM/Security/Policies/Policies/00001001 = 1
HKLM/Security/Policies/Policies/00001005 = 40
HKLM/Security/Policies/Policies/00001017 = 144
I've installed EnableRapi.cab and Cert_SPCS.cab, but it still doesn't work.
Has anyone found a solution for this?
Same for me
I did all the same actions but it still doesn't work
Anyone?????
I think the problem is a result of some incompatibility of ida's debugger dll under OMAP 850 cpu...Therefore I use m$ deviceemulator which is VERY slow.
I had problems aswell with my devices... And after this last post.. i tried a WM device without a OMAP 850.. And it worked fine for me... on every OMAP850 device i tried .. i get the same error as you guys have reported..
So I must agree with george that OMAP850 is the problem
sashje, the problem is in IDA debugger's CPU detection routines. I've even reported this to IDA "support" but they paid no attention to my words.
Datarescue
you must download CE Debugger for windows ce if have it you must test another version of it you can download directly from datarescue
accepted, as far as I know even the latest versions of IDA 5 are bundled with an old ARM remote debugger dated from 2005...I bet that presently there is no such working version with OMAP CPU, but I would take my words back if only you could have pointed out the links for the downloads you meant.
if u changed your WM to unofficial WM
if u have any problem with pointers and breakpoints
if u have any connection error
you should test another version of CE Debugger On IDA PRO 5(my current version)
i have this problem with my device(Axim X30)
i changed CE debugger and work truth now
if you want some version of CE debugger i can give u
please use private messages
thanks
regards
accepted, your axim has Intel PXA270 (at 624MHz). We are speaking about Texas Instruments OMAP CPU problems lately here - so your remarks are quite incompetent. There is no version of this arm ida remote debugger dll that can work with OMAP CPU. If you have one (I'm sure you don't) please share it with all of us.
Texas Instruments
oh man i am sorry
i don't read carefully
IDA PRO do not support OMAP and only support ARm version
only support ARM(CE debugger)
sorry again
I've spent days and night trying to install a cab. file on my ppc without a succes now how a hell can I desable the certificate and signiture of this file.
thanks a lot for your help
You can try a program called certification off "Cert_SPCS.cab" it turns off the validation in WM5 (not sure if it works with later ROMs but worth trying)
Search for it.
Or go to: www.pdamagician.com/wm5software
I have already done it, still get the same message" installation was unsuccessful the program or seting cannot be installed because it does not have suffisient system permissions. Other solution will be highly apreciated, thanks anyway
Have a read of this thread, might help you !!
http://forum.xda-developers.com/archive/index.php/t-249863.html
The link here above did not help, thanks anyway. So again
is there any genius friend out there who knows how to unsigned cab, or disable signatures? 3 months waiting for a solution is too much.
Thankyou
Beny said:
The link here above did not help, thanks anyway. So again
is there any genius friend out there who knows how to unsigned cab, or disable signatures? 3 months waiting for a solution is too much.
Thankyou
Click to expand...
Click to collapse
Do you use a pocket pc device or a smartphone?
For pocket pc you can use my tool to turn off security.
So no prompt when you install or start an application with
no certificate.
Copy to device and start after some seconds a message box
is displayed with the result.
Houser
Houser said:
Do you use a pocket pc device or a smartphone?
For pocket pc you can use my tool to turn off security.
So no prompt when you install or start an application with
no certificate.
Copy to device and start after some seconds a message box
is displayed with the result.
Houser
Click to expand...
Click to collapse
Thanks Houser for your precious help, unfortunatly this did not work, I still get the same borring message concerning cab signature. What if we unpack the cab file, unsighned it and then repack it again. I wish I was a programmer!!
NB. The device is a pocket pc with WM 2006 onboard
Now lets get it strait, who can help me to re-build this bt patch for an Eten M700. This later can make the device compatible with a pioneer car headunit.
ThanksView attachment BT.ARM.CAB
Hello there from Italy.
I posted this because of a problem that is driving me mad since some weeks. first my data.
pc:
win xp sp3
outlook 2003
active sync 4.5
qtek 9000:
win 5
sbsh phoneweaver
sbsh iLauncher
memmaid
sprite backup
The problem is that when I connect my qtek to the pc via the usb cable the pc tells me that it had a problem installing the new hardware. After that no active sync is coming out and thus no syncronization.
It is definitely a pc bug since I can syncronize my qtek in other pc.
Following some italian forum I uninstalled all usb controllers and things but had no success.
I'm desperate. Can you please help me?
My bests
Michael
Guys...................no one really can help me out?
C'mon, this is a giant leap for me but a small step for you...............
Michael
Did you uninstall/re-install ActiveSync? If not, try that.
If you have and that didn't fix it, try going to Start > Settings > Connections > USB to PC and untick "Enable advanced network functionality" then try again.
Thanks Nanoruler for your quick response.
Yes, I did try to reinstall AS 4.5 plus I have no icon for USB to PC connection in my qtek 9000.................what's going on here?
Thanks............
Michael
Try running the attached CAB
Nanoruler,
thanks a 1000 for your help. Not being a nasa computer expert, can you tell me what is the cab attached and how to use it?
Thanks in advance
Michael
Nanoruler, are you there, my friend?
I'm relying on your help for this..............
hope to read from you soon.............
Michael
Thanks a lot for this file usbswitch!!! after installing it HTC HD syncs again!
Hi Batvanio,
can you please tell me how to install it? I'm a bit beginner here............
bests
Michael
batvanio said:
Thanks a lot for this file usbswitch!!! after installing it HTC HD syncs again!
Click to expand...
Click to collapse
It's working with vista?
please..........i'm on my knees: can someone tell me how to install it? Sorry for being such a beginner but it shouldn't be such a big deal to tell me how to use this thing.
all the bests
Michael
michaelmellner said:
please..........i'm on my knees: can someone tell me how to install it? Sorry for being such a beginner but it shouldn't be such a big deal to tell me how to use this thing.
all the bests
Michael
Click to expand...
Click to collapse
Depend if you´re using Vista or XP
Vista: Windows Mobile device Center
XP: Active Sync 4.5
Just google it, download and install
Good luck,
ok. I gave it a try, but nothing new happened. I want to think it is not the usb switch fault but my lack of knowledge. Since I don't know how to install it, I clicked on the xml file. An IE page opened wanrning me of the threat running activex commands. I accepted it and clocked on run. After that I tried to hook my qtek but, as mentioned, nothing happened.
Did I install it the proper way?
please let me know about it.
all the bests
Michael
Michael, just copy usbswitch.cab to an SD card, and then find it on your Uni using File Explorer and click on it. It will then install.
Hi Jon and a milion thanks: finally someone who guided me through. Gosh, after all it didn't take that much, uh? All it took was your words.
really really thank you
Michael
iiiiiiiiiiiiiiiiihaaaaaaaaaaaaaah!!!!!
it works: after a zilion months and tests I finally got my universal to hook with my laptop again.
Thanks a lot for that USB switch: it sure helped me out on this while hundreds in various forums across the world couldn't..............
Incredible........
Michael
xda-developers - the best place for gathered information!
definitely!
michael
cant connect
Hey guys... i just bought a qtek 9000 and i can't sync it with my laptop. Running
WinXP SP3
ActiveSync 4.5
and
WM 6.1 RAN ROM
I tried the usbswich cab and nothing happened. Can you help me?
The PC installed the device but activesync is not even trying to sync the device.
Congrats on your Universal!!
Try to uncheck the advanced functionality under usb to pc
Also have a deep read here:
http://forum.xda-developers.com/showthread.php?t=549207
Hope it helps,
If you like it, someone could help me, I did all the tutorials (including cygwin) and I can not activate the wifi and BT on XP.
I crashes when I click on cygwin.bat "ioperm-i" he says "command not found" ...
ghost image of XP would be the best solution, otherwise I still listen to all possible solutions
Please help me !
ghost image of XP
dreeck said:
If you like it, someone could help me, I did all the tutorials (including cygwin) and I can not activate the wifi and BT on XP.
I crashes when I click on cygwin.bat "ioperm-i" he says "command not found" ...
ghost image of XP would be the best solution, otherwise I still listen to all possible solutions
Please help me !
Click to expand...
Click to collapse
Hi dreeck!
I'm preparing myself to move from Vista to xp, I did my forum reading, but I'm still reluctant to go ahead due to the high number of reported issues of various nature. Did you manage to find a good working ghost image of XP for Shift somewhere to fit you? If positive, could you please post a link to it?
Thank you!