I installed 3rd party bluetooth drivers for my USB BT Adapter. It didn't work correctly, so I uninstalled the software which was removed from my computer, but overwrote my original XP SP2 BT drivers. Now everytime I startup my computer, it detects new hardware and asks me to find a driver. Windows Update can't find the driver and it asks for the manufacturer's CD which was bad to begin with. How can I get my original SP2 BT drivers back? Uninstalling the manufacturer settings has also screwed up my COM port and now I can't run ActiveSync.
Related
First post so be gentle
I've searched past posts and found similar questions but not many answers
I was happy using my mda vario 2 via usb to my mce laptop
I purchased vista ultimate on release date and since then haven't been able to connect via usb.
I'm currently using it via bluetooth but would prefer my usb back
Has t-mobile released an updated usb driver for vista yet ?
I take it that you have downloaded the Active Sync for Vista 4.5
Once you have this downloaded, when you first connect your device it will install all the new drivers and carry out the process of setting up the syc data.
I hope that this will help you in some way
D
P.S. Search Microsoft.com for active sync for vista
djstegges said:
I take it that you have downloaded the Active Sync for Vista 4.5
Once you have this downloaded, when you first connect your device it will install all the new drivers and carry out the process of setting up the syc data.
I hope that this will help you in some way
D
P.S. Search Microsoft.com for active sync for vista
Click to expand...
Click to collapse
Vista uses WMDC, not activesync.......
You don't need Active Sync 4.5 in Vista, you need Windows Mobile Device Center, its already available thru Windows Update or website
will WMDC allow you to run RUU programs from this forum, or do I still need to figure out the whole usbser.sys thing? I'm pretty savvy, but I'm still a bit confused on this point.
i have the Windows Mobile Device Center software.
I'm wanting to use the mda as a modem on my laptop so i need a usb driver.
The usb driver included on the install disc is for xp only and isnt compatible with vista.
Is that correct or have people have got it working ?
thanks in advance for any help
I can't even get my device to be reconnized by Vista anymore. WMDC doesnt detect it at all...
To install the modem drivers for vista, edit the usbmdm file like so adding
"include=mdmcpq.inf" in these three sections.
[Modem1.NT]
DriverVer=05/13/1999
include=mdmcpq.inf
CopyFiles=FakeModemCopyFileSection
AddReg = All, MfgAddReg, Modem1.AddReg, Voice, EXTERNAL, MDMGL007.V90_Voice,MDMGL004.ExtraCID,MDMGL001.TerseResp
[Modem1.NT.Services]
include=mdmcpq.inf
AddService=usbser, 0x00000000, LowerFilter_Service_Inst
[Modem1.NT.HW]
include=mdmcpq.inf
AddReg=LowerFilterAddReg
For the RUUs, you have to replace the WMDC drivers with the old ActiveSync ones; there's a thread on that somewhere. As for the USB modem, I would recommend switching to a WM6 ROM - it no longer uses the weird modem drivers, it just appears as a network device automatically, at least in XP, but I would assume Vista has that driver built in because XP does.
Setup: Stock Cingular 8125 WM5, Vista Home Premium 32bit
I've had no problem with in the past getting my Cingular 8525 to tether with any XP machine. However, Vista is proving to be even more worthess than XP as I imagined it would. WMDC works fine a side from it too being even more worthless than it's predecessor, as I can't even remote sync over a secure VPN anymore.
I have read and installed the drivers located both:
http://forum.xda-developers.com/showthread.php?t=288753
and
http://www.terranettech.net/DisplayPg.aspx?codeid=1128
Neither works solution...
With WMDC disabled I activate the Wireless Modem connection. Vista detects a new USB device at that point and starts looking for a driver.
It comes back saying it could not find a driver, and I click a button to specifically tell it what driver to use. I've tried both drivers listed in both URLs. Neither are accepted. I'm told "The folder specified does not contain a compatible software driver for your device."
For the record, the driver on the CD didn't work either (different message, something along the lines of "failed to install driver").
If I go into Device Manager and "Update Driver" (no driver is installed, Update is used whether no driver yet or really updating) and let Vista try to find it itself it says "The best driver for your device is already installed.", which is "Unknown Device".
Any ideas? I've seen people claiming they got their 8525 to tether with Vista using the modified driver. On my end it does not work though.
No ideas? Is there another place I should post this instead?
this may help
For anyone having trouble getting their laptop to recognize the 8525 as a modem this may be the solution.
http://www.terranettech.net/DisplayPg.aspx?codeid=1128
my phone was working fine but when I tried to set my wife's up to tether it wouldn't show new hardware found when plugged in and when I tried to manually install the driver the process box just kinda stalled out and wouldn't go forward with the driver even though I had browsed to the right one. I had to uninstall the driver which was viewing the phone as a serial device. if you're having this trouble then try following the link above...
Hi
I got this morning the driver to use my QTEK 2020 as wireless modem with my laptop (windows XP SP2). Thanks to Rudegar.
But.
When I pluged the PPC the first time with USB, the Laptop's Windows asked for installation of the driver and I did it without problem.
Now, in the modem properties of the configuration panel the modem is in the list ("HTC USB Modem") but it is still seen as "absent". It doesn't care if I run "WModem application" on the PPC or not. It is still "absent".
Any idea ?
Hi
Does anybody out there has the usb modem driver for HP ipaq 6828 for windows vista.Thanks
Have you tried to install the successor of Activesync (its called Mobile Manager or something), all the drivers you need should be there. (It worked for me)
Unplug USB Cable device, try uninstall activesync, restart n install again, then plug ur USB cable device, PC will search driver and found.
its work for me
drrajeeb said:
Hi
Does anybody out there has the usb modem driver for HP ipaq 6828 for windows vista.Thanks
Click to expand...
Click to collapse
You don't need a seperate driver for the USB Modem!Just follow these steps:
1)Plug in your device in USB Modem Mode (don't worry even if Windows doesn't find a driver for your device)
2)Open Device Manager
3)Right click your device and select "Update Driver Software"
4)Search for any drivers manufactured by HUAWEI company and select the driver and click to install!(if you don't find any drivers manufactured by HUAWEI, then find another driver for a dial-up modem and update to that driver)
It should work,atleast it worked for me!
This applies to a specific device not on these forums but running Windows 8
I upgraded from Windows 7 on my Viliv N5 and now the webcam and a "Marvell 802.11 sd8686 Wireless LAN SDIO" won't start... I checked both online and computer manufacture... I got drivers from the computer manufacture that hard reboots and one from online with: "Error code:10 Device Cannot Start"
As for the webcam I might have to call the now shutdown business so I'm hoping for a fix...
Did you do an in-place upgrade, or did you do a clean install that replaced Win7? In-place is supposed to work, but in my experience it almost never does it perfectly. Clean install is the way to go. Copy your driver files to a flashdrive or something first in case Win8 can't find them, but usually it can.
Alternate option: Uninstall theoffending drivers (entirely; use Device Manager and remove the driver software). Then reboot the PC and see if it tries to load the drivers from Windows Update. This *should* find them. If it doesn't, try installing the drivers from disc / downloaded files.
Tried Windows Update as soon as I did a CLEAN install... wiped HDD incl recovery >.<
I can provide device id... and the website gives me a corrupt driver
Edit: Will do a "Dirty Install" if I reinstall stock will my key expire?