hi!
I'm pulling out my hair one by one..
I've installed several apps and then: GPRS only worked after a disconnection/connection on the GSM network. In other cases (after a gprs or voice call) it said that there is no modem on the line, there is no such a phone number/etc... I've done this twice.
Now I've installed SPB apps, Resco apps, the device is working very well.
I'd like to install the following apps:
-CELAB netmonitor
-Electric pocket ringo
-memory maid..
Are these apps incompatible with Jasjar?
This is known behaviour when using an older version of PocketZenPhone (PZP)
Maybe you have it installed?
no, I've installed it only today, but the error didn't come up...
Related
hi
anyone have a problem with activating phone pad when writing SMS?
often this happens to me following soft-reset the keyboard pops up by default and changing to phone pad does not work. it kind of only half comes up and is non-functional. sometimes the whole sms application will crash. requires soft-reset and try again until it works.
thought it was a memory shortage, but i have reinstalled apps to storage and now have 28MB free, split into 17MB for programs and 11MB for storage, which should be ok.
maybe a conflict with something i'm running?
Yes, I have the same problem.
There are 2 posts in here about it, but no solution from what I can see. Would love someone to fix it.
I have a feeling it got something to do with Pocket informant. U running it ?
nope - so tick that one off :wink:
additional programs running at startup... lets see:
omega-one battery pack pro
omega-one program bar and other utilities
spb GPRS monitor
microsoft voice command
sbsh pocket weather
think that's about it.
any correlations?
rosco
I have installed all of them, But removed them after.
The only one still installed is voice command
just had the pleasure of reinstalling everything after a required hard reset (curruption on the sd card leading to lots of lock-ups - my fault for getting impatient and disconecting the activesync during an avantgo update!).
anyway, the phone pad was back to perfect functioning until i installed voice command. its now uninstalled again and will stay that way :?
do you have voice command installed to main memory or storage?
i have installed it in storgage. but i have tried both places
I have used pcoket PC devices from the Philip Velo1 and even before that. I have never faced memory loss like with the K-Jam. The device slows down with time but when I check the running programs list I see a full page list. As soon as I close them all the device performs well again.
Is there anyway of automatically clearing memory and closing running programs with the K-Jam (WM5) after say 2 or more programs running?
Hi.
What you need is to read http://forum.xda-developers.com/viewtopic.php?t=29863
and then install PocketPlus 3.0.1 . Problem solved
if you want to go fastter then read
http://forum.xda-developers.com/viewtopic.php?t=30011
and do what it say's .
but like everything in life do yer research before you take a risk .
I did, and the results were great . 200% improvement in performance and useability.
Thanks for the response. By the way I have already removed the Antivirus software.
But how does the PocketPlus help?
By the way I have tried the latest PocketPlus and it still crushed my k-Jam on reset.
alman said:
Thanks for the response. By the way I have already removed the Antivirus software.
But how does the PocketPlus help?
By the way I have tried the latest PocketPlus and it still crushed my k-Jam on reset.
Click to expand...
Click to collapse
Check to make sure you have version 3.0.3 of PocketPlus as my K-JAM crashed every time with 3.0.1. It wasnt until i downloaded 3.0.3 that i was able to boot normally. You could also disable the safe mode feature in Pocket Plus options before you reset which fixes the boot problem with earlier 3.x releases.
EDIT: SPB Software now has a note on the PocketPlus version history informing that the Wizard specific issues with safe mode have been fixed as of v3.0.4.
http://spbsoftwarehouse.com/products/pocketplus/history.html?en
Pocket Plus has a feature where you can change the behaviour of the close button [X] so it can close apps instead of minimise or even popup a menu with more options. Have a search of the forum here, and over at www.modaco.com as there is heaps of info about Pocket Plus and other options for closing / minimising apps (some of them are even free).
Regards,
Chris
SPB Pocket Plus !!
can you provide me a link where to freely download Pocket Plus 3.0.3 or 3.0.4 ??? i'd appreciate it ...
thanx in advance.
If you're buying PocketPlus just for the task/memory manager, have a look at the many free alternatives, e.g. WisBar Advance, VBar, MagicButton, Pocket Nav, GSPocketMagic etc etc. Several (e.g. MagicButton, GSPocketMagic) allow you to set exception lists so you get to choose what gets automatically closed instead of minimized.
That's the best way with the Wizard, as some apps need to be kept in memory due to the slow loading times from ROM, e.g. Calendar, Contacts and Messaging. For URLs, Google is your friend.
I actually prefer managing what's running in the memory manually. gives me a feeling of control. I usually leave some of the frequent apps running. stuff like calendar, phone, activesync, IE.
I upgraded to the WWE BigStorage ROM v1.13, but the Blutooth-Icon is missing somehow...
It disappeared after I installed some software (actually on my device: Resco Explorer, TCPMP, SPB GPRS Monitor, SPB Diary, SPB Pocket Plus, CELab CAB Installer, Ericz Call Filtering)
does somebody know how to bring it back?
greetz Stefan
Re: BT-Icon disappeared
Nemesis311088 said:
I upgraded to the WWE BigStorage ROM v1.13, but the Blutooth-Icon is missing somehow...
It disappeared after I installed some software (actually on my device: Resco Explorer, TCPMP, SPB GPRS Monitor, SPB Diary, SPB Pocket Plus, CELab CAB Installer, Ericz Call Filtering)
does somebody know how to bring it back?
greetz Stefan
Click to expand...
Click to collapse
What causes your problem is that you have a lot of stuff automatically loading at startup. From your list, all of the three SPB applications and I would expect also the Call Filtering app.
The bluetooth tray-icon is also loaded at startup, but after the today screen apps. For some reason BTTray needs to be loaded within a certain time after reset, or it will not load at all.
The quick way to solve it is to "trim" your today apps to load a bit quicker. Like only showing the next 7 days in Diary.
This has been discussed here before, and If you search this forum for old postings you should find more info (and solutions).
those 15 seconds you can change in tweaks2k.net?
I'll try, thx
==>even starting with no single todayplugin and after removing the callfilter the icon is not back...
will have to live without it
greetz Stefan
icon reappeared, but greyed out...it says that there is no bluetooth-hardware installed on this device :shock:
wicked sick...
edit: weird: after starting in safemode and now coming back to normal starting mode he wanted to install a USB device...
1.time: didn't do anything, ckicled cancel, BT-Icon was greyed out again woth no installed device...
2.time: typed "BT" in, device showed a failure and didn't install it, BT-Icon still greyed out, but I could enter the blzuetooth menu without any problems.
-->activating blutooth made the icon appear normal, but showed that bt is inactive, the blue LED blinked, so I knew it WAS active.
Deactivating and activating now made the Icon get to work again
==> problem solved
greetz @all, Stefan
Hi everyone!
I've got a strange prob on my Universal. It is a german MDA Pro flashed with the german Qtek ROM 1.30 and Radio 1.09. I've installed Pocket Breeze 5 withe some Plugins as Contact Breeze and iLaucher and Pocket Weather. My PIM is Pocket Informant.
All these are installed on SD.
Whenever I activate Breeze it works absolutely perfect. Then I switch the Pro off and switch it on again after a while. It comes to life and before it actually shows the today-screen it freezes and I have to reset
iLaucher, Pocket Weather etc. are deactivated when using PB of course. On the other hand these work as normal Today-plugins .... Installing PB to the internal flash didn't change anything.
Deactivating Breeze as today-plugin immediately solves the freeing problem ... !!!! ?
I didn't notice this behaviour with the T-Online ROM Version 1.20 / radio 1.06.
Another strange thing I found is that the Universal seems to automatically end some programs when going to 'sleep'. This concerns Pocket Informant and Flexmail 2006 and Dinarsoft Handymenu. Several other progs are not affected.
This is really weird and I'd love to have PB back to life sinece it ideally does what I need. I wouldn't like to change back to the 'old' T-Mobile ROMs.
Any idea is very much appeciated!
Thanks for your help
mikrolinux ;-)
http://www.ppc-welt.info/community/showthread.php?t=88161
??
Hi Pernod99!
Thanks for the info! So I'll play with different install-targets.
I'll keep you posted with the things I'll (possibly) find out
Thanks again!
mikrolinux
Damn you got me excited, i thought macromedia release a pocket pc version of their Breeze software, now that would be good.
Hi Ahrjay!
I suppose we're talking about different 'Breezes' ;-)
The Pocket Breeze here is Pocket Breeze from www.sbsh.net It's an Today Plugin integrating PIMs, Mailers, Meters and stuff.
Sorry for the false alarm
cheers
mikrolinux
Hi Pernod99!
Well this seems to be the solution. I've reinstalled PocketBreeze, Contact Breeze and iLauncher to the devices flash
and soft-reset the MDA. Since then it seems to run as desired - fast and stable so far.
It seems PB doesn't like to be installed on SD, this concerns it's plugins as well. It urged me to reset the device frequently
until even the last PB-plugin had been removed from SD and shifted to the systems flash-mem.
There is an option inside PB that determines how Plugins are called. This usually is set to dynamic which means that the
plugin is initiated on first use after a reset. So everything runs pretty smooth until you call an application PB has to init from SD
-> crash after wakeup.
Setting the above option other values such as static doesn't alter anything since PB always has to init theSD and often crashes,
presumably due to timeouts. So PB and everything it has to init have to be installed to the devices flash for proper operation.
Thanks again for your help!
Have fun!
mikrolinux ;-)
Is it me or does the T-mobile Dash 3g randomly closes out of apps. I was in my Internet explorer and it juss closed out. It also does this when i recieve messages. Is it my setting or something because i cant uderstand whats doing this.
Mine too
I have the T Mobile Dash 3g unlocked with win 6.5, same thing started happening today...all apps closing after abiyt 10 seconds. Looking for the problem.
closing
this seems to be a win 6.5 issue, and possibly a problem with SPB software.
I foind this thread but there are others too:
I also found a reference to SK Tools which i also have installed. If I cant find a solution soon, I am going to reset the phone and start a clean slate
reset the phone
well i reinstalled win 6.5 and it was not so bad since i was near the beginning anyway and had all programs saved in one spot. I did not install SKTools this time, i did install SPB online, and so far so good, the apps are staying open.
BTW A GREAT free program is SMARTToolKit which will expand your soft keys and give you lots of quick options....works well.
Yup,it's not all apps, just seems to be IE only. And yes it wont stay open like all the other programs when phone goes to standby. Very annoying. FYI, I'm using 6.1
Dash 3G Apps minimizing
There are few threads on this issue. I have narrowed this down to some change in the registry. I will know which part of the reigstry shorty. After running one of many apps (SPB online, SPB radio, Wunder Radio, Pocket Tunes, SK Tools, even the native Bluetooth app) application windows will not stay open and apps minimze on their own after about 10 seconds. If i restore the registry the phone works fine again. Since this problem spans so many different apps and developers, it is a MS problem. MS may say it is the developers problem, either way someone needs to fix it./