xda2 dead after update!! - MDA II, XDA II, 2060 General

hi friends! hope im not disturbing you! need some help! my xda2 dead after i updated it! help pls. thank you!!! tried to reset,bootload still dead, wont power on

maybe you can remove the battery, let it sit for a while and reinsert the battery again.

tried it already,soft reset, hard reset, not working, the only thing that appears in the lcd is, serial V1.60,,,,,, what will i do?? how do i bootload?? help pls!!

You're in the bootloader now, so connect USB & run the rom upgrade program again. Hope it works for you, if not try another shipped-rom.
Regards, M

yes!!!
thanks a lot for the help guys!! my 02 is now okokokokok!!!!! thanks for the help!

yes!!!
thanks a lot for the help guys!! my 02 is now okokokokok!!!!! thanks for the help!

Related

XDA ROM update crashed - pease help

Hello,
I know, i am not the first one with this problem and i read many threads but i am not clearly understand the way (if there is a way) to fix my problem.
After updating my german xda Device i restarted and have been promped to enter my Pin, but the screen is frozen. So i did first a soft and after this a hard reset. Now after every hard reset i see the the O2-bubbles for some minutes and then the white screen with the blue bar on the top. Nothing is working.
I i wait for 10 or 20 Minuten the bubbles coming back - same game everytime.
I tried to enter the bootloader while holding the Power-Button while soft-resetting. BootLoader is seen, but shows a "gsm error".
I can not establish an active-sync-connection via USB-Cradle.
What can I do to rescue my XDA? Is there any possibility or can i put it to trash?
Any advice is very welcome!
Thanks!
Miwu
Dear all,
I am facing the same problem (XDA ROM update crashed) as miwu now . Can any expert teach me how to solve this problem by myself :?: or I need to let O2 engineer to fixing it :!: .
Thanks a lot !
Please HELP !
Dear all,
I can't get the white screen with the blue bar on the top because I am using 02 xda ver 4.00.11 (PPC2003), so that I can't use the repair.zip to fix it.
Any expert can to teach me how to fixing it by myself ?
Thanks !
Hi,
after half a night i fixed my described problem with the gsm-error in the bootloader.
I will post my solution in a new thread today in the afternoon.
Thanks to XDA-Developers for this great forum, its very helpful.
Thanks and regards from Berlin!
Miwu
Miwu,
That's great for you !
BTW, do you using PPC2003 as well ?
Hope to see your solution soon !
Thanks ! :wink:
Hello,
just posted my solution in a new thread
http://xda-developers.com/phpBB/viewtopic.php?t=2489
take a look there.
We first tried to fix it using 2003-SD-Flash but it become buggier, the pling-sound does not played, so we flashed back to PPC2002 and made it as described in the new thread!
Hope, you can flash CE with an PPC2002, maybe it helps, but I do not really know. Simply try or not!
Best regards from Berlin!
Miwu
I will try but I don't think it will work on mine because I am using bootloader v5.17 . Anyway, think for your help !
Best regards ! :lol:

Rom Update Crisis For Atom

Dear friends please help me.
In my previous posts i had mentioned that my atom is not syncing (via usb or bluetooth) nor is it charging as there seems to be a problem with the motherboard.
I am trying to sync via infrared. Please help me with the information whether the ROM can be upgraded with the one on the o2 website via infrared.
Thanks a million in advance.
swordfish99 said:
Dear friends please help me.
In my previous posts i had mentioned that my atom is not syncing (via usb or bluetooth) nor is it charging as there seems to be a problem with the motherboard.
I am trying to sync via infrared. Please help me with the information whether the ROM can be upgraded with the one on the o2 website via infrared.
Thanks a million in advance.
Click to expand...
Click to collapse
bro, ROM can be upgraded using the storage card. Simply put the diskimg at the root of ur card den enter bootloader mode (press center button+power+soft reset hole) Hope its help!
Cheer and good luck!!
kaidi
ckaidi said:
bro, ROM can be upgraded using the storage card. Simply put the diskimg at the root of ur card den enter bootloader mode (press center button+power+soft reset hole) Hope its help!
Cheer and good luck!!
kaidi
Click to expand...
Click to collapse
Brother Fist of all thanks a million for responding. Brother I am a newbie hence I do not know much of the process you mentioned above. Please tell me in detail step by step what to do. Right now I am downloading the ROM from the O2's website and keeping on my system.
Waiting for your kind reply please let me know.

Help requested!~! tri-color to be solved!! or bricked?

Could people help me solve my problem of the three color? I wanted to install a flash (I did it many times before, but now this).
Please see next thread.
I can use every help!!
Thank you!!
Kind regards,
Michel
http://forum.xda-developers.com/showthread.php?t=417344

SP3 Dead Need Urgent help !!

Hi All,
Am new to this forum ! but have been a passive member since very long time !
Now I have major issue and need help from the fellow members !
I have a Imate SP3 and was trying to update the rom ! My stupidity !! I tried to flash SP5 ROM to this and at 68% the desktop application threw and error and disappeared ! the phone was stuck at 68%,so I took the battery out and from then on the phone doesn't switch on !!
So desperately need help as to what to do !! please help me guys !!
Thanks in advance !
Regards.
Ok first download a proper ROM for your SP3.
I think you can use the procedure as when you want to revert to wm2003 on this tread:
http://forum.xda-developers.com/showthread.php?t=279464
Thanks !
Hi,
Thanks a lot buddy ! but the said procedure only works if the phone is atleast in the bootlaoder mode (i,e the tricolour mode) but as I said mine is almost completely dead (no lights when charger or the usb is connected and not powering on,I mean not even the LED glows) !!!!
So Am kinda stuck in this stage ! so I need a real trick to some how gain access to the ROM and flash it completely and install the proper one ( I mean I have to erase the EEPROM completely !)
Its similar to the one in the post #8 in the link you've sent !! and the answer to it in post is what I don't want to hear !!
Anyways thanks for quick reply man ! really appreciate it !
Regards.
Hi, are you solved your problem with your phone, if not i can help you, Wright me to PM...
P.S. For all Who unlock his phone via Imei-check, please send me your used "Key file"...
charge ur batire an tray agin baby
and tel me morrrr
handsome1_blr said:
Hi All,
Am new to this forum ! but have been a passive member since very long time !
Now I have major issue and need help from the fellow members !
I have a Imate SP3 and was trying to update the rom ! My stupidity !! I tried to flash SP5 ROM to this and at 68% the desktop application threw and error and disappeared ! the phone was stuck at 68%,so I took the battery out and from then on the phone doesn't switch on !!
So desperately need help as to what to do !! please help me guys !!
Thanks in advance !
Regards.
Click to expand...
Click to collapse
My Cousin Did the Same Exact Thing to his Imate SP3i it also got stuck at 68% it does nothing it was brand new now its paper weight anyway to fix this ?
defcomg said:
My Cousin Did the Same Exact Thing to his Imate SP3i it also got stuck at 68% it does nothing it was brand new now its paper weight anyway to fix this ?
Click to expand...
Click to collapse
Wright me to PM...
Typhoon Service Manual
http://mikechannon.net/PDF Manuals/HTC_Typhoon_Service_manual.pdf
Feeler Service Manual
http://www.mikechannon.net/PDF Manuals/HTC Feelers Service manual_Rev A01.pdf
Jtag Detection
http://hackaday.com/2007/09/29/automatic-jtag-pinout-detection/
defcomg said:
Typhoon Service Manual
http://mikechannon.net/PDF Manuals/HTC_Typhoon_Service_manual.pdf
Feeler Service Manual
http://www.mikechannon.net/PDF Manuals/HTC Feelers Service manual_Rev A01.pdf
Jtag Detection
http://hackaday.com/2007/09/29/automatic-jtag-pinout-detection/
Click to expand...
Click to collapse
For what you want use jtag-pinout-detection? Links on this site are dead, and hear you can find Jtag pins for Typhone: http://forum.xda-developers.com/showthread.php?t=414103

MDA Compact Germany Serial/USB Error

Dear Helpers,
thanks for reading this. I have a problem with my MDA Compact from germany. After few months, I wanna used it now again, but If I start, there is a error with "Serial".. If I put it a USB-Cable, there is "USB". The Hard and Soft-Reset don´t work. And If I try to use one of your tutorials, I don´t find the files in /windows/Temp/...
Anybody can help me? I read more than 5 hours, but I can´t repair my cell-phone ):
Serial/USB
v1.00
Thanks and sorry for my bad english!
i think you have the same problem like this guy http://forum.xda-developers.com/showthread.php?t=513486
try to flash your rom on win xp
Thanks for this fast reply... I will try it at a friend.. But which tutorial I should choose, because I have v1.00.
Thanks for helping!
sorry but i don't know what the different is on 1.00 i think there you have to ask other guys who knows more than me. i just had problems flashing with vista and thought this would help you, too
and sorry for my bad english too...

Categories

Resources