Customization i would like to share - 8125, K-JAM, P4300, MDA Vario General

Hi all,
i have made a CAB file that contain all the customization i like to my K-JAM. every time i do a cold boot i had to recustomize my registry manually one by one and it took too much time so i decided to put it in one CAB file this way i only need to run a single file.
so if anyone found it usefull here it is.
it do the following:
1- adds PHM trylunch to your programs
2- adds "save as: first last" to contacts
3- enable cleartype on landscape
4- increase the mic sensitivity level
5- creat a shortcut to "Runing Programs" in your windows directory so all you need is to point PHM trylunch to \windows\taskman.lnk and you will have nice icon on today screen.
6- adds sofykey applet to your settings.
7- adds a wireless today plugin < not working in all ROMs as it need a dll file which is saved on ROM > tested on latest K-JAM ROM OK.
8- adds (caps lock/shift) indicator beside soft keyboard icon when you using hard keyboard
please make a backup to your device before using this file. it was only tested on my K-JAM .

Which version of smartskey
Which version of smartskey are you using for this customization?

Re: Which version of smartskey
jkossowsky said:
Which version of smartskey are you using for this customization?
Click to expand...
Click to collapse
if you mean softkey so here it is.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thanks ammar that's a nice addition to the registry wizard - wll give it a go

Yes works well on my Qtek.
Any possibilty on posting a version without wireless or clear type tweaks. I have old rom so wireless tweak does not work (had tried tweak before so knew that)
'btw forum anybody tried adding new dll for wireless to old rom phone windows directory?' could someone post dll so can give it a try - thanks
If not possible to remove tweaks good work- thanks

ammar said:
...2- adds "save as: first last" to contacts...
Click to expand...
Click to collapse
thanks for sharing! btw... what is the reg-hack for "save as: first last"?

meschle said:
Yes works well on my Qtek.
Any possibilty on posting a version without wireless or clear type tweaks. I have old rom so wireless tweak does not work (had tried tweak before so knew that)
'btw forum anybody tried adding new dll for wireless to old rom phone windows directory?' could someone post dll so can give it a try - thanks
If not possible to remove tweaks good work- thanks
Click to expand...
Click to collapse
hi,
i have added a new file on top of the page :wink: , regarding the dll file it is on the ROM so you can't replace it with new one.
lpasq said:
ammar said:
...2- adds "save as: first last" to contacts...
Click to expand...
Click to collapse
thanks for sharing! btw... what is the reg-hack for "save as: first last"?
Click to expand...
Click to collapse
hi,
it is not only reg value, a dll file should be installed also, here it is.

Thanks ammar you're a star

ammar thanks a lot 4 this useful utility!
Has anyone tried it with the latest Qtek WWE Rom?

Opps! how did i forget!!! the customization also adds a (caps lock/shift) indicator beside soft keyboard icon when you use hard keyboard.
sorry last night when i post it i was so sleepy

Works with the Qtek latest WWE Rom!
ThankQ again ammar for ur work, it will be useful to update this little but handy application with new tweaks.
Just a question, when i enable the wireless today plugin nothing happens when i press the bluetooth icon. Any recommendation?

bill_viper said:
Just a question, when i enable the wireless today plugin nothing happens when i press the bluetooth icon. Any recommendation?
Click to expand...
Click to collapse
hi bill_viper,
the wireless plugin will only display the status of your Bluetooth, Wi-Fi and your operator name/Flight mode.
once you turn on your Wi-Fi it will show name of connection and when you turn it off it will shown Wi-Fi:Off.
regards.

Nice
nice from you to share this, thanks for your effort

ammar
thanks a lot man 8)

ammar said:
hi bill_viper,
the wireless plugin will only display the status of your Bluetooth, Wi-Fi and your operator name/Flight mode.
once you turn on your Wi-Fi it will show name of connection and when you turn it off it will shown Wi-Fi:Off.
regards.
Click to expand...
Click to collapse
Thanks again (x3) for your answer ammar! Keep up the good work and supply us with good utils!

ammar said:
lpasq said:
ammar said:
...2- adds "save as: first last" to contacts...
Click to expand...
Click to collapse
thanks for sharing! btw... what is the reg-hack for "save as: first last"?
Click to expand...
Click to collapse
hi,
it is not only reg value, a dll file should be installed also, here it is.
Click to expand...
Click to collapse
is there a reg-value that needs to be set or changed after installing .cab?

hi lpasq,
the cab already install the dll file and adds the reg values needed.
regards.

excellent work ammar,
BTW can you please post the softkey app so that i can assign different applications to right and left softkey?
Thanks

ammar said:
hi lpasq,
the cab already install the dll file and adds the reg values needed.
regards.
Click to expand...
Click to collapse
BIG THANK YOU

The microphone now on voice calls is too sensitive is there an intermediate setting? - if you dont know i will check the threads thanks

Related

[new release] btCrawler - Bluetooth Diagnostic tool v1.1.0 beta

[dead and buried] btCrawler - Bluetooth Diagnostic tool v1.1.0 beta
Folks,
I just wanted you to inform about release version 1.0 of btCrawler.
New features are:
- Redesigned the Smatphone UI. Handling should be better now.
- Added Bluejacking for both PPC and SP
- Added file transfer over BT and IRDA (PPC only)
- Added Bluesnarfing code (PPC only)
- Created CAB installer
TODO:
- Write a documentation
Get it from here: http://www.silentservices.de/btCrawler.html
*** UPDATE 09.02.2007***
Version 1.1.0 beta is out.
Changes are as follows:
Added Bluesnarfing for Smartphones...
- Added Logging (Logfile goes to \My Documents\btc-devicelog.txt)
- Added File Open Dialog to the Transfer Page
- Added an options dialog (in main screen press menu->options)
- Added bluetab exploit (to activate create a dword with the name "ISC-Sploits" and a value of "1" under HKCU\Software\Microsoft\Bluetooth\Mode) Then you will have a new Button in the main screen. There you can active the bluetab sploit. (Reference: Google for Qnix and bluetab) BE RESPONSIBLE!!!
- This is a beta release. Some things may work, others not...If you find a bug, please send me an email.
Cheers
nice app.
only issue is I don't have an icon for the program?
It's just the generic white program box, yet under the .exe properties, I see the BT/Target icon, so it's close...
Thanks a lot for your feedback. I thought that I fixed the icon thing...
I'll put it on my todo list and check it again.
cheers
Thanks. It works great. To putt a icon by your programs you must make up a Shortcut and cut/paste it in your Windows/startup menu/programs folder.
diemetdiesnor said:
Thanks. It works great. To putt a icon by your programs you must make up a Shortcut and cut/paste it in your Windows/startup menu/programs folder.
Click to expand...
Click to collapse
yeah, i'm aware of that but we're talking about the icon for a shortcut...I don't have one, it's a generic program-box icon
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The icon in programs.
This is getting OT I think...but here we go
The icon not in .exe file
The icon not in SmallMenu Plus
You are right. I haven't seen yet.
OK, I fixed the Icon bug and also a bug in the cab. A shortcut link is now created in the startmenu.
Thx for the hints!
Direct download of v1.0.1 > http://www.silentservices.de/btcrawler-v1.0.1.CAB
c0rnholio said:
OK, I fixed the Icon bug and also a bug in the cab. A shortcut link is now created in the startmenu.
Thx for the hints!
Direct download of v1.0.1 > http://www.silentservices.de/btcrawler-v1.0.1.CAB
Click to expand...
Click to collapse
Thats it! working as it should now.
nice job.
how is this installed please?
thankyou
digidude said:
how is this installed please?
thankyou
Click to expand...
Click to collapse
Just copy the cab file (version 1.0.2 as of now) to your device and click it. It will then be installed.
i have downloaded the latest version and copied it to my xda
its showing as an xml file called _setup and 2 unknown files BTCRAW~1.000 and BTCRAW~1.001
thanks for looking
I see one small problem - oushing Transfer without prior scanning causes end of application
And it's released 28.8, while today is 24.8
Hi Marx2,
Marx2 said:
I see one small problem - oushing Transfer without prior scanning causes end of application
Click to expand...
Click to collapse
Can you explain that any further? You start btCrawler and directly press the Transfer button. Then the program exits. Have I got this right?
Marx2 said:
And it's released 28.8, while today is 24.8
Click to expand...
Click to collapse
That's correct. It's a future release ;-) Thanks, I fixed it...
yes, oushing=> pushing
I also see enormous battery drain while scanning/in transfer mode. hovewer probably it's normal? or maybe it's my OS fault? I use 1.0, will try the newest.
I also don't understand interface, after scanning you can click on discovered device, or choose it from combo box. What's difference?
In transfer mode one device sometimes show a few entries with different services, nice to know which one to use to send file/message/bluesnarf.
Is it possible to snarf adressbook only, or for example files/images too?
Anyway I use MDA2, if you want to know
Marx2 said:
I also see enormous battery drain while scanning/in transfer mode. hovewer probably it's normal? or maybe it's my OS fault? I use 1.0, will try the newest.
Click to expand...
Click to collapse
Yes, the battery drain might occur when using active scanning, but there's nothing I can do about.
Marx2 said:
I also don't understand interface, after scanning you can click on discovered device, or choose it from combo box. What's difference?
Click to expand...
Click to collapse
If you want to make a SDP query for a device you must first select it from the drop down box. The listbox has no additional function.
Marx2 said:
In transfer mode one device sometimes show a few entries with different services, nice to know which one to use to send file/message/bluesnarf.
Click to expand...
Click to collapse
The program shows multiple entries for a device if this device offers multiple services for transfer. Rule of thumb: For bluesnarfing you stick with Object Push. For file transfer you can use all. I personaly always use Object Push.
Marx2 said:
Is it possible to snarf adressbook only, or for example files/images too?
Click to expand...
Click to collapse
Currently only the address book is snarfed but maybe I will add the grabbing of all other (like send/received SMS, call history and so on...)
As for the rest: You are right. I should write some kind of documentation but unfortunately I'm currently out of time.
after enabling BlueSnarf pushing Transfer doesn't cause end of program (?)
In transfer mode new discovered devices gains automatically focus. They shouln't because you can accidentally sent message to another person
Abot BlueSnarfing other thing - images seems to give most fun because you can make great jokes with them
Marx2 said:
after enabling BlueSnarf pushing Transfer doesn't cause end of program (?)
In transfer mode new discovered devices gains automatically focus. They shouln't because you can accidentally sent message to another person
Abot BlueSnarfing other thing - images seems to give most fun because you can make great jokes with them
Click to expand...
Click to collapse
Hm, never had that problem with the program exiting on my devices...but if it's gone and no other has similar probs...
I'll check about the autoselct option and will fix it for one of the next releases.
I'll check the pictuer grabbing if I get my SE T610 back...
i've tied snarfing on my own s55 and Nokia 6010 without success
It would be nice to have optional logging of which phone was snarfed un/successfully

iPhone icons to be used with Spb Pocket Plus (including Pocket Plus v4.0)

I just converted the iPhone icons to be used with Spb Pocket Plus v3.0. (for v4.0 goto to page 4 post #34 by h4ndy).
The icons source is from mphayvanh (http://forums.sbsh.net/index.php?showtopic=18416&st=0).
Just extract the file and copy it to Pocket Plus folder (\Programs Files\PocketPlus\Icons).
Feel free to update the file.
... UPDATED TO INCLUDE VGA & QVGA
Here the screenshot for the first set:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshot for the second set:
Screenshot for the third set:
Screenshot for the fourth set:
Below are icons files for v3.0 (for v4.0 goto to page 4 post #34 by h4ndy):
Thank you so much! I like'd those!
Hello,
I have loaded these into the folder you described. I cannot select them though on my BA device (WM2003SE). Any ideas what I am doing wrong?
argosafe said:
Hello,
I have loaded these into the folder you described. I cannot select them though on my BA device (WM2003SE). Any ideas what I am doing wrong?
Click to expand...
Click to collapse
Mine is for VGA. Now I am uploading the new set which included the QVGA version. It should appears in your Pocket Plus icon selection now. Here they are:
Many thanks for this and your quick response. All is now working!
argosafe said:
Many thanks for this and your quick response. All is now working!
Click to expand...
Click to collapse
Here's the updated version.
can anyone tell me how i can change icons of programs that i install or are already installed?
see a view here that i would like to replace original ones with
Thnx
anheuer said:
can anyone tell me how i can change icons of programs that i install or are already installed?
see a view here that i would like to replace original ones with
Thnx
Click to expand...
Click to collapse
Just tap and hold the icon you want to change. Then tap the "Change Icon" and choose the icon set from the upper left corner button. That's it.
cayotte said:
Just tap and hold the icon you want to change. Then tap the "Change Icon" and choose the icon set from the upper left corner button. That's it.
Click to expand...
Click to collapse
sorry if i just overlooked what you meen..
but.. were and how do i do this..
on my pc or htc touch?
and were exactly
were do i find the "folder" were i can change the icons?
sorry.. still pretty new with this
Thank you
anheuer said:
sorry if i just overlooked what you meen..
but.. were and how do i do this..
on my pc or htc touch?
and were exactly
were do i find the "folder" were i can change the icons?
sorry.. still pretty new with this
Thank you
Click to expand...
Click to collapse
You have to install Spb Pocket Plus on your PDA first for this to work.
very nicely done, works great
Cayotte, how do I port my own icons to work with spb pocket plus?
Wisdom3G said:
Cayotte, how do I port my own icons to work with spb pocket plus?
Click to expand...
Click to collapse
For those who like to make or share their icons please follow this link:
http://www.spbsoftwarehouse.com/products/pocketplus/new_icon_list.html?en
Here's the second set of icons for Pocket Plus (84 icons):
cayotte said:
For those who like to make or share their icons please follow this link:
http://www.spbsoftwarehouse.com/products/pocketplus/new_icon_list.html?en
Click to expand...
Click to collapse
This link is of no help!! It only explains the mechanics behind it and tell you basically what you should do. Now, I am far from being a dummy. But, I have questions. 1, what imaging program do I use to make the files? 2, How do I mask each icon? 3, How do I fit all the icons on one file? I think the imaging program would be a break through. For me anyways. And a couple hints. Anyone, please.?
Wisdom3G said:
This link is of no help!! It only explains the mechanics behind it and tell you basically what you should do. Now, I am far from being a dummy. But, I have questions. 1, what imaging program do I use to make the files? 2, How do I mask each icon? 3, How do I fit all the icons on one file? I think the imaging program would be a break through. For me anyways. And a couple hints. Anyone, please.?
Click to expand...
Click to collapse
I myself use Photoshop to port the icons. But, sorry, I'm not an expert, just know a little basic about the program.
Thanks for the second set of icons Cayotte, well done!
Thanks ya Cayotte,
See mine http://forum.xda-developers.com/showthread.php?t=330182
Here's comes the third set (download from the first post)
i tryd to use it..
but i could not find the way to change the icons of my programs on my Touch.
some one told me by press and hold.. then change icon..
but that only works with the icons i see in my today screen in the section of this program.
i want to change them so i can see other icons in my application tab of the programs i puth there..
Or is there a different way i can do this?
thank you

cant find vjtoggletoday???

i am trying to find Vjtoggletoday that has the setting to change the width of you today bar and bottom bar or if there is anything similar to it maybe with auto-hide for the today bar and bottom bar.
thanks,
You could use Wisbar Advance Desktop http://www.lakeridgesoftware.com/products.php?prod=WisBar+Advance+Desktop
There is a small learning curve but the possibilities are almost endless.
try http://www.vijay555.com/?Releases
KidGixxer said:
try http://www.vijay555.com/?Releases
Click to expand...
Click to collapse
i checked already and its not there.
From what I can tell, vjToggleToday was never finished. The last version I saw was in alpha form and you need to create a shortcut with a command switch to make it work. I'm using dcinobar to remove the bottom toolbar and it's flawless. Install the cab, soft reset, done.
*edit* I do have the alpha version of vjToggleToday if you want it.
jhendrickson said:
From what I can tell, vjToggleToday was never finished. The last version I saw was in alpha form and you need to create a shortcut with a command switch to make it work. I'm using dcinobar to remove the bottom toolbar and it's flawless. Install the cab, soft reset, done.
*edit* I do have the alpha version of vjToggleToday if you want it.
Click to expand...
Click to collapse
thanks, but not what i am looking for.
i saw some where long time ago one with settings that i can add a number on how much i want to hide on both top and bottom bars. i tried google it and i tried to search here too but no luck.
aih1977 said:
thanks, but not what i am looking for.
i saw some where long time ago one with settings that i can add a number on how much i want to hide on both top and bottom bars. i tried google it and i tried to search here too but no luck.
Click to expand...
Click to collapse
I only have cab to hide the bottom one.. not sure who built it but I found it some where.. it's been working fine for me.
I'd like to know how to hide the top one too.. if possible.
Here's the cab.
Taeksoo
Do any of these allow the tray app to be moved?
Can anyone assist with letting me know if these allow you to relocate any tray launch applications right to the bottom of the screen?
aih1977 said:
thanks, but not what i am looking for.
i saw some where long time ago one with settings that i can add a number on how much i want to hide on both top and bottom bars. i tried google it and i tried to search here too but no luck.
Click to expand...
Click to collapse
I posted details on this when I installed VJToggleTodayAlpha last time -- here you go.
The problem that I'm having now is that I don't get the "Open With..." prompt on the context menu for the app from my File Explorer (on press+hold). Wierd...
noahv said:
I posted details on this when I installed VJToggleTodayAlpha last time -- here you go.
The problem that I'm having now is that I don't get the "Open With..." prompt on the context menu for the app from my File Explorer (on press+hold). Wierd...
Click to expand...
Click to collapse
sorry i tried it but it is not working. also i remember that someone had created the program as an exe file so you dont have to do all that mumbo jumbo with the file explore. i am trying to find that file again but thanks for your help.
aih1977 said:
sorry i tried it but it is not working. also i remember that someone had created the program as an exe file so you dont have to do all that mumbo jumbo with the file explore. i am trying to find that file again but thanks for your help.
Click to expand...
Click to collapse
Tell me where will you run the vjtoggletoday.exe from (where will you place the exe) and I will create the shortcut for you.
KarhU said:
Tell me where will you run the vjtoggletoday.exe from (where will you place the exe) and I will create the shortcut for you.
Click to expand...
Click to collapse
\Program Files\VJtools
One more thing this will bring up the config option? thanks!
I have created shortcuts for you - in the attached Zip file. Copy the vjtoggletodayiialpha.exe to the Windows folder, vjtoggletodayAutorun.lnk to Windows/StartUp folder (if you want the program to be run at every boot) and copy vjtoggletodayConfig.lnk wherever you see fit.
Edit: I will put it to the folder you chose. You can try if config works on this version. And yes the config works (tested)
Links updated to your location. Hope it will work for you. If you changed the name of the exe (then the lnk will not work), or will change the location of the exe in the future you can edit the link in desktop windows in notepad.
KarhU said:
Links updated to your location. Hope it will work for you. If you changed the name of the exe (then the lnk will not work), or will change the location of the exe in the future you can edit the link in desktop windows in notepad.
Click to expand...
Click to collapse
THANKS!!!!
Thanks guys.
VJToggleToday II was not finished as it straddled PPC2003 and WM5.
I've subsequently finished version III as a research app for my use, and version IV will be released, eventually, for you guys.
It's context sensitive, enlarges only the today screen, but the bars are back as they should be in normal use. Works quite nicely. I'm away for a bit, but will be back coding hard soon.
V
vijay555 said:
Thanks guys.
VJToggleToday II was not finished as it straddled PPC2003 and WM5.
I've subsequently finished version III as a research app for my use, and version IV will be released, eventually, for you guys.
It's context sensitive, enlarges only the today screen, but the bars are back as they should be in normal use. Works quite nicely. I'm away for a bit, but will be back coding hard soon.
V
Click to expand...
Click to collapse
That is a great news vijay. Thanks for your efforts! Anyway there is only one thing that I did not like about the version we are using - it shrinks both top and bottom bar - I do not mind getting rid of bottom bar, but top one conveys much more information, but this is user definable so no big deal.
Current version, VJToggleToday II, has registry settings or a hidden config dialog that can be used to specify what height you want each bar. That way, you can leave the top bar at its default height of 26 pixels, and only shrink the bottom bar. I believe you just launch it from a shortcut, with a command line of -config or config.
Check the main thread for clarification.
Hiding the top bar was only really for my own use, inorder to use it with a special skin I wrote to replace the top bar:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
VJToggleToday II was only ever distributed through this site I believe, never on my own websites, as it was still R&D, not final. If anyone's looking for it, look on this site!
V

NEW HTC TaskManager 2_1_33556_1 Large Icon ITA-WWE

HI,
NEW HTC TaskManager 2_1_33556_1 Large Icon ITA-WWE
DOWNLOAD View attachment 83470
DOWNLOAD View attachment 83376
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi from Luigi.ING
Dude, do you mind posting what is the big deal with these items you are posting? Are these items improvements over the prior versions which slow down the TC?
TIA!
Hi
I like this task manager, since I tried it on bepe ROM.
Can you indicate me to translate it in another language.
Thanks
Cool. Thanks for the additional info. However, the question still stands: does this version slow down the device as did the prior versions?
this one is great, running perfect on my Kaiser also. Thank you sooo much
thanks alot for the great find!!
THX!
But seems lack of some files like up(down)_enable(disable)_*.bmp , there's no up&down arrow in the list. And quickmenuicon just for QVGA, cant fit to VGA, I think must modify the REG LauncherUp and LauncherDown, but dun know how
liay said:
THX!
But seems lack of some files like up(down)_enable(disable)_*.bmp , there's no up&down arrow in the list. And quickmenuicon just for QVGA, cant fit to VGA, I think must modify the REG LauncherUp and LauncherDown, but dun know how
Click to expand...
Click to collapse
Hi copy the missing files into windows folder i forgot them also in the Oem in the other thread from luigi.ing here
(http://forum.xda-developers.com/showthread.php?t=387912)
http://rapidshare.de/files/39255366/TaskmFix.zip.html
Teijak
hi people any one got cab to make index menu large like in bepes rom ? thanks to who can help..
Thank you, Teijak
The arrow come back
Now the only thing is I dont know where to find the QuickMenuIcon, so cant modi it to fit VGA
liay said:
Thank you, Teijak
The arrow come back
Now the only thing is I dont know where to find the QuickMenuIcon, so cant modi it to fit VGA
Click to expand...
Click to collapse
I dont have a VGA device. Does it look bad, to small?
Sorry i think here i can not help you.
Teijak
Map a shortcut?
I have been reading about third party apps to get to "a" task manager. Is it even possible to map a shortcut to this TaskManager if you are already on the Today Screen?
I would like to eliminate grabbing the stylus to start the task manager. Hitting the the volume was resolved by using WisVol.exe. Can the same be done with the TaskManager with Wisbar? I'll ask this same question in other forums and threads if applicable?
Nice it works! on htc touch cruise wm6 nl
luigi.ing said:
HI,
NEW HTC TaskManager 2_1_33556_1 Large Icon ITA-WWE
DOWNLOAD View attachment 83470
DOWNLOAD View attachment 83376
Hi from Luigi.ING
Click to expand...
Click to collapse
Hi,
Is it possible to force big button use ?
Mine become little button after first use.
OK, I have find
"EnableLargeIcon"=dword:00000001
Mine seems have been reseted to 0 after options modifications.
Thanks
Moo
MooCan said:
Hi,
Is it possible to force big button use ?
Mine become little button after first use.
Thanks
Moo
Click to expand...
Click to collapse
Tap on the 'spanner' icon for settings > others tab then you can choose large size.
Abbsta said:
Tap on the 'spanner' icon for settings > others tab then you can choose large size.
Click to expand...
Click to collapse
What is this spanner icon? I went to the options menu but don't see a setting.
spanner is the options menu (middle icon in the task manager)
but i have also no "others" menu in mine (bepe 0.64 rom default manager)
But you can nonetheless adjust the "EnableLargeIcon" registry tweak
posted before and it works.
Registry tweak (seems also to work with older Task Managers)
HKCU\Software\HTC\Taskmanager ->
DWORD "EnableLargeIcon"
VALUE: 1
But I noticed, that the Task Manager seems to reset the Large Icon setting
again to "0" if you enter the the Task Managers Options menu
However, if you do the registry tweak and avoid to enter the options menu
afterwards it seems to stay large.
Olioaglio
Olioaglio said:
spanner is the options menu (middle icon in the task manager)
but i have also no "others" menu in mine (bepe 0.64 rom default manager)
But you can nonetheless adjust the "EnableLargeIcon" registry tweak
posted before and it works.
Registry tweak (seems also to work with older Task Managers)
HKCU\Software\HTC\Taskmanager ->
DWORD "EnableLargeIcon"
VALUE: 1
But I noticed, that the Task Manager seems to reset the Large Icon setting
again to "0" if you enter the the Task Managers Options menu
However, if you do the registry tweak and avoid to enter the options menu
afterwards it seems to stay large.
Olioaglio
Click to expand...
Click to collapse
You can enable or disable large Icons with rom settings tool from bepes rom and many other settings too.
Teijak
Thanks....
The new program works great on HTC 3470. The one came with the OS was buggy and often disappeared. This new one works great. Thanks.
One thing is that if you you in and change the settings then the large icon disappeared. Any ideas how to get it back? Registry setting?
Thanks
Error Installing Italian Version
Hi Luigi.ing
I try to install both version on my Kaiser, The WWE version is working correctly but I'm not able to install the ITA version I got the invalid certificate error.
do you have any suggestion?
Thanks
E

[WAD] Simplicity Theme FIXED!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A theme i made with simplicity in mind. Does only the basics that I personally use. May not suit all but of course feel free to modify as you need!
PLEASE NOTE:
This theme was made for my Touch Diamond so some shortcuts/buttons may not function correctly depending on your phone.
This can be fixed by click-holding and correcting the target yourself.
Requirements:
- Wisbar Advance Desktop 2
- Mortscript (located at the bottom)
Instructions:
Make sure you have Wisbar Advance Desktop installed first on your Device. NOT STORAGE.
Install the CAB also on device.
Simple!
Known Issues:
The Notifier for SMS does not clear when reading sms in the Messages Tab.
This is a scripting problem with the program and not the skin itself and thus i cannot do much about.
Click to expand...
Click to collapse
Donations are welcomed - Thankyou
​
EDIT: Forgot to say that tapping the Carrier/Battery area shows the System information dock, and tapping the clock shows the Calender Dock.
will this work on WAD 3 ?
how can i change the shortcut of the sms page??
my rom is in Ptg and i have to do some changes
the theme is fantastic
tks
Krzy: Sorry i have no idea as im using Advance Desktop 2. Tbh is there even a ver 3 out? or all u talking about "Wisbar Advance"
Over_limit: Make sure Author mode is on which means you can edit the theme. Click and hold the item you wish to modify. Im not sure what changes you need to make, maybe a little more info and i could help
m00moo said:
Krzy: Sorry i have no idea as im using Advance Desktop 2. Tbh is there even a ver 3 out? or all u talking about "Wisbar Advance"
Over_limit: Make sure Author mode is on which means you can edit the theme. Click and hold the item you wish to modify. Im not sure what changes you need to make, maybe a little more info and i could help
Click to expand...
Click to collapse
yes i no, but here is the link to open the sms box? in the sms page?
Sorry, so you mean you wish to change the target location of the "Send New" button on the messages tab?
WAD is not Wisbar Advence Desktop ? IF yes ... yes there is ver 3 out ....
EDIT: Sorry My mistake. ver is WisBAr Advance Without Desktop
Wow, this looks amazing!!
Whenever I install WAD again, I will definitely try your theme!!
m00moo said:
Sorry, so you mean you wish to change the target location of the "Send New" button on the messages tab?
Click to expand...
Click to collapse
in this is ok but i can´t see my sms on the screen.
Doesn't work on Kaiser,nice theme though bruv.​
I'm probably missing something out, but I can't get this theme to work.
I've got Wisbar Advance Desktop
I installed Mortscript
I copy the cab for the theme to my device and installed it
When to the Wisbar config, and selected the theme (not much seemed to happen)
The background of the default home screen changed to black for a second, and then went back to the default
I tried a soft reset, but still no theme....what am I doing wrong?
Mittens said:
I'm probably missing something out, but I can't get this theme to work.
I've got Wisbar Advance Desktop
I installed Mortscript
I copy the cab for the theme to my device and installed it
When to the Wisbar config, and selected the theme (not much seemed to happen)
The background of the default home screen changed to black for a second, and then went back to the default
I tried a soft reset, but still no theme....what am I doing wrong?
Click to expand...
Click to collapse
Seems right to me. You sure you are running Wisbar Advance Desktop 2?
problem showing sms
Nice theme! I have a problem. Sms messages will not show in sms tab... any clue?
hi. great theme. works perfect...nearly. i also got the prob with the sms. no symbol for new messages is on screen. old sms aren´t there, next...previous doesn´t work, too. but i do my best!
ps. i changed the regional settings du english (united states). don´t know if those settings have any influence on it.
Using a Reg editor please check if you have this Regkey installed (The cab should've installed but just in case)
HKLM\Software\ThrottleLauncher\Messaging
Also please make sure you have MortScript installed.
Could you please tell me if any errors are shown when you try to view messages?
m00moo said:
Seems right to me. You sure you are running Wisbar Advance Desktop 2?
Click to expand...
Click to collapse
WisBar Advance Desktop, v 2.1.5.1
I unticked touchflo from the today settings...would that make any difference?
m00moo said:
Using a Reg editor please check if you have this Regkey installed (The cab should've installed but just in case)
HKLM\Software\ThrottleLauncher\Messaging
Also please make sure you have MortScript installed.
Could you please tell me if any errors are shown when you try to view messages?
Click to expand...
Click to collapse
Yes, it's installed and the folders are there.
No errors shown. Nothing happens when in that tab.. everything else works great.
m00moo said:
Using a Reg editor please check if you have this Regkey installed (The cab should've installed but just in case)
HKLM\Software\ThrottleLauncher\Messaging
Also please make sure you have MortScript installed.
Could you please tell me if any errors are shown when you try to view messages?
Click to expand...
Click to collapse
hi. thanks for the reply. mortscript is installed. the reg keys are there. in "ThrottleLauncher" is the key "MessagingCom" in "Messaging" is another folder called "SMS".
ok my problem is when i tab the message icon i ressive a message box and have a error message the sortcut is invalid.
so i can see my sms
@m00moo - Might wanna inform everyone they need Message2reg for the SMS to work.
Secondly for those that have a blank theme... Click and HOLD then choose Wallpaper and pick one. The likely hood is you have the default black wallpaper and it makes this theme look almost blank with it.

Categories

Resources