Hi all,
I bought a Bluetake BT400 G5 3 month ago. But since I've ugraded my K-Jam to the new ROM it is not recognized anymore. It still recognize my bluetooth GPS but I have a "No Devices found" when I try with my headset (my headset is on of course).
Anybody else? Somebody has a solution?
I guess I'm the only one facing that issue
i think the same problem is here:
http://forum.xda-developers.com/viewtopic.php?t=44479
Have a look
Related
Its been a week since I have upgraded to new ROM and my kjam has stopped creating the connection between my jabra 250 and the unit. It shows a partnership in the connections, but does not activate when I turn on bluetooth and the headset. This is the second time. (I have upgraded the ROM two times and both times a week into it, my bluetooth headset has stopped working).
Any suggestions?
thanks,
mike
It just happened to me this morning... my Jabra 250 is not recognized and it turns out that my BT hardware is having problems. It took forever to restart the device. Now I'm trying to run the ROM update again. I'm using the latest AKU2 ROM (2.17.7.2) from Qtek on unlocked CID Qtek 9100 device.
Seems like I have a dead bluetooth hardware on my hand... anybody knows where I could get this thing fixed locally at Los Angeles, California area? Thanks.
Also had problems with my BT Platronics M2500 hands free when i first updated my kjam. My Kjam recognized the hands free device and it worked great until I turned off the BT hands free device. When I turned it bvack on again my Kjam didn’t seem to be able to find the BT device, so I had to delete the pairing between Kjam and BT device and do the pairing operation again. I then tried a Nokia BT hands free to see if it was a problem with my Kjam, did the pairing and after that my BT Platronics M2500 hands free began working perfectly. I don’t know why but it did, maybe an AKU2 bug?
So my advice is to do a pairing with another hands free BT device and see what happens before you go buying other BT device.
although the blue light flashes away merrily, i just cannot see nor can i connect to any other devices.just keep getting ' no devices found '
Same problem too
My bluetooth has stopped function as well. T-mobile MDA Vario (USA) here. upgraded to 2.26 ROM a while ago everything has been fine until last week where i could not use my bluetooth headset. now it will not discover ANYTHING or pair with anything. Soft-reset and hard-reset doesn't help! what happened???
-DC :shock:
no idea mate, you got just the same prob as i have.
i flashed my wizard to wm6.1 a couple of hours ago and now my bluetooth won't work!! can anyone help???
Anyone know why the Cingular 8525 doesn't currently support the Nokia BH800 bluetooth headset, and when there may be a software update that will fix this?
Is this a problem with all versions of this phone, or just the Cingular one?
i also have the Nokia BH800 (cute headset) and it doesnt wrk properly with my jasjam. The mic is really low, sound is really low, doesnt support handsfree profile (only headset). It is quite strange because on my wife's nokia n73 it works like a charm with all the profiles and redirects all sound to it, even with tomtom nav 6 on her mobile.
Dont know how to help you as I am in the same boat. anyone else have the BH800?
I have the BH800- works absolutely fine with my TyTn using the latest firmware (on the Tytn, not the headset!).
Do we know that the Cingular 8525 will not work with the BH-800 by experience or by heresay??
I had the TyTn for a brief period of time, trialed the JasJam, and now have the 8525 -- thus far the 8525 has proved to have the most stable firmware, better radio, etc. so I can't imagine the Bluetooth being behind.
I just received my 8525 from premiere and it came with a small flyer that reads
The Nokia BH800 and Motorola H670 bluetooth headsets are not compatible with the Cingular 8525 and Cingular 8500 at this time. Compatibility with these headsets will be available via software download in the near future.
help!!
I see that im not the only one having problem with the Nokia BH800, im happly using the Black v3.0.1 rom on my hermes (softbank) but i cant seems to make the BH800 to work handsfree, did any one have a solution for that??
thanks
thetechnogeek said:
I have the BH800- works absolutely fine with my TyTn using the latest firmware (on the Tytn, not the headset!).
Click to expand...
Click to collapse
I have the Softbank edition which firmware is recommended to work with the Nokia BH800?
pls help
I've just got a Orange SPV M3100 and paired it with my BMW OEM bluetooth carkit, all goes fine and paired no problems.
It manages to connect to the phone and display contact details on the radio display and make calls.
But leaving it a couple of hours and coming back, the phone will not reconnect back to the car. I've tried resetting the phone without success.
The only way to get the connection back is to re-pair the devices.
I had a Imate Jamin before and it worked without a problem, connects every time.
Is anyone else experiencing problems with their carkits?
Do you think the problem is specific to the Orange ROM, would flashing it to a Imate or TyTN ROM help or resolve the problem?
Any advice would be greatly appricated.
Hi, I got a problem similar like yours...
I´m from Spain and I have an ´06 Opel Astra(Vauxhall in UK) with the BT handsfree carkit from factory.
If I make a hard reset to my Vodafone S200 (Orange SPV M600) and leave the machine with the factory settings it works fine with the carkit, but it recognice the carkit like a headset handsfree. But if i restore a back up with the TomTom 6 installed... wow, then start the problems... the handsfree conect with the S200 but after a few seconds the connection is over...
I don´t know if have you got some kind of navigation system, but in my case the problems starts when I install the TomTom... I´m sure it changes some drivers of the BT and this makes the don´t works propertly.
I don´t know what to do...
PArrot Car Kit
I have the same problem with Parrot Car Kit and I have the latest TYTYN ROM
2006 BMW 3-Series Bluetooth
My car doesn't have bluetooth, but I had a loaner car while my car was under the knife. The loaner car was a 2006 3-series w/ Bluetooth. The first pair was perfect, but after a few hours.. What a POS.
I have the latest ROM on my phone, and that didn't make a difference.
No issues on my 5 series, but I have one of the first ULF modules in mine.
From reading TyTN Bluetooth issues around the net and on this forum, it seems to be an issue with the TyTN having some kind of power save mode which turns the bluetooth off after some time.
Kinda stupid, anyone know some registry crack to turn any power saving off?
I have a Parrot CK3100 in a BMW and a brand new SPV M3100. All was working well with my M600 but as soon as I swapped the phone for the M3100 last week I've had problems as described by the OP. Bluetooth keeps switching itself off on the SPV. It works well enough to start with and then suddenly it disconnects. Re-pairing works and it's worth going to bluetooth settings and turning it back on again before you try re-pairing.
Surely there must be an easy fix for this problem - I'm just really pleased I'm not the only one with this fault.
............
Your all quite lucky it works at all..mine doesn't do anything
My Ford Fiesta has been waiting for an 'software upgrade' since October !!
Promised it would be available before Xmas but nothing happened.
lifterus said:
Try and replicate the problem with a different phone if possible. One that BMW supports. If can replicate it, then they'll update the firmware on the BT unit in the car. This happened to me. But I had to prove my case using my girlfriend's RAZR before they'd listen and stop blaming my phone as the cause.
Click to expand...
Click to collapse
I dont think it is a problem with the BMW carkit as it worked fine with my SPV M600 (Prophet)
I got my S200 back from a repair and it was also upgraded form G3 to G4.
Everything seems to work fine, except my Jabra BT500 head set. After pairing with my S200 I got a very cracking sound.
So I checked my Jabra with another mobile phone and it worked very well. I checked another head set with my S200 and again a cracking sound.
Does anybody knows how to solve this or do I have to return my S200 again for repair?
Hi, I have excatly the same problem, it also occurs with the bluetoothof my car...anyone can help us?
I have returned my S200 to QTEK today in order to have it repaired (again).
I have tested it (in my car) with 2 other Bluetooth headsets and there was no problem. There was also no problem when I tested my own headset on another phone. So this proves that my S200 has some kind of defect.
The sound is very crappy ?
Or is the soud quite ok, but experiencing high frequency glitches, kind of metallic parasits?
Because in that case, there is nothing to do, It's due to the MS bleutooth stack which has a very poor encoding librairy... and since there is no widcomm stack for S200 (and some other qtek too, a lot of people is yet trying to malke it work), then evey bleutooth headset will have bad sound in A2DP with the S200 :'(
One of the main reasons why I want to change for a widcomm stacked pocketPC (shame on MS!!!!!!!!!!)
For me, the quality is very bad. At the beginig I use it only on my car and it was working perfectly, since I try to connect to the bluetooth headset or to my computer the sounds became very very crappy. I have Dopo ROM, which rom do you have? what ROM do you advise? Thank you
I have tried the LVSW, Jester and shipped ROMS and all these ROMS have the same problem. So I think that it is not related to the ROM but due to bad hardware components.
it's strange because it was working for me before I use other bluetooth device. I will try to upgrade the rom to the official QTEK ROM
I have the same problem. As if the bluetooth signal were cut per moment.
it's not linked to roms, but to bluetooth stack, so since the bt stack is updated (but I doubt it), changing roms won't help
I could fix it, I update the ROM, delete all pairaing on my cars... I change the "hsotname" of my QTEK on "settings - Owner information" I recreate the pair and it works fine on my car, now crappy sound anymore. Just to test it again, I try to pair my "fujitsu laptop" to my qtek, since I did it, the sound is again very crappy. So I will flash again and pair it only with my car. If I return it to Qtek it takes 1 months... If someone can fix this that would be great.