I'm trying to connect my Qtek 9100 to our company network using the Qtek built in VPN software. We don't have a Win 2003 Server but I would think you still could be able to connect with VPN.
(We have Win 2000 Server)
What I would like to do is to connect to the VPN and the send/recieve emails like any other laptop connected through VPN. I don't looking for the PUSH email function, but just the ordinary send/recieve function.
Question: Is it possible and if so -how - to connect my Qtek to our company LAN using GPRS and VPN?
Is there some third part company that have any CPN client to install that might work?
Thanks,
Daniel
Related
I have a trouble connecting to a terminalserver when I am connected to Wlan. When using GPRS or GSM I can connect to my office server with no problem.
When using Wlan at home the server always times out. When I am on my work lan I get the question about adding a VPN or proxy. Since we do not use VPN or proxy I do not realy do not now what to do.
Are you not able to connetct to terminalserver via Wlan?
Best regard to all.
Hi,
I've got my jamjar to active sync with an exchange server directly,
and via a VPN server.
It will sync using the VPN server from my home wireless broadband point thru the interweb and the VPN to the exchange server, But if I try this using GPRS/3G it fails (activesync spins for 8 minutes then gives up).
I know the VPN link is good cos I can connect to a remote PC with the terminal services client.
Is it something to do with the timeouts being too short to cope with the delay over GPRS?
Any ideas gratefully recieved.
Hi,
I am hoping someone out there can help me. I currently have a SPV M600 (Prophet) and I am trying to use the phone to receive my emails.
I VPN in to our network over GPRS which appears to connect fine as I checked the ISA server which shows the connection. However, there is no data transfer. It appears that the VPN is not using the IP address of the network that should be assigned to it, which will not allow it to connect to anything on my network.
Other windows mobile OS work, just seems to be Windows Mobile 5.
Any ideas?
PlazzDaz said:
Hi,
I am hoping someone out there can help me. I currently have a SPV M600 (Prophet) and I am trying to use the phone to receive my emails.
I VPN in to our network over GPRS which appears to connect fine as I checked the ISA server which shows the connection. However, there is no data transfer. It appears that the VPN is not using the IP address of the network that should be assigned to it, which will not allow it to connect to anything on my network.
Other windows mobile OS work, just seems to be Windows Mobile 5.
Any ideas?
Click to expand...
Click to collapse
Have you tried to add exceptions in network/advanced tab in connection applet ?
You should try to add these two exceptions: "http://*/*" and "*/*"
Ciao, Francesco
I dont know where you are but here in France, Orange and SFR block VPN traffic, specifically "GRE 43".
It could be much the same problem.
I dont know where you are but here in France, Orange and SFR block VPN traffic, specifically "GRE 43".
It could be much the same problem.
Are you using the built in VPN within WM 5, I know for myself I have to use a more complex VPN client to access my work network. I am currently testing Bluefiresecurity's client, it appears to work well but is a bit expensive at $79. Antha VPN also produce a client but I had problems switching between Wifi and GPRS.
I hope this helps. I am on O2 UK and can access my work network using bluefire.
John.
Can anyone connect to VPN (PPTP) using WM5 via wireless or GPRS?? When i use my old XDAIIi or II, i can connect by now using WM5 i cannot.
Hope those can connect please share. tks.
I can connect to a Windows 2000 PPTP VPN via wireless -- make sure that in Settings/Network Cards/Network Adapters, your network card is set to connect to the Work network.
Also, in Settings/Connections/Advanced/Select Networks, make sure that the lower droplist (private network) is configured to use the Work network.
Aside from those two items, I can't think of any other gotchas.
Ya still doesn't work......
do you know what the vpn device is that you are trying to connect to?
windows servers tend to be quite reliable. there are known issues with some checkpoint and cisco devices.
Hello,
I am having the same problem! I cant connect via VPN (PPTP) to my Windows Server 2003 RAS setup. It works perfectly fine on my laptop over the internet but when I try to connect using my Cinguar 8125 I get a generic "Invalid username/password' kind of error message. I have tried several differnt things, but I was wondering if there are security settings that are turned off or something like that? I actually have my RAS policy to let any device establish a VPN connection (obviously as long as it is authenticated) so I dont know what to do next... any suggestions??
RickoT said:
Hello,
I am having the same problem! I cant connect via VPN (PPTP) to my Windows Server 2003 RAS setup. It works perfectly fine on my laptop over the internet but when I try to connect using my Cinguar 8125 I get a generic "Invalid username/password' kind of error message. I have tried several differnt things, but I was wondering if there are security settings that are turned off or something like that? I actually have my RAS policy to let any device establish a VPN connection (obviously as long as it is authenticated) so I dont know what to do next... any suggestions??
Click to expand...
Click to collapse
For me works fine. I have only 2 connections:
a) my isp, with gprs configuration for vodafone
b) my work network, with the vpn connection definition (ip address, user, passw and domain)
I have it set up the same way and I still get the password issue... what kind of policies do you have in RAS?
RickoT said:
I have it set up the same way and I still get the password issue... what kind of policies do you have in RAS?
Click to expand...
Click to collapse
did you uncheck the security in the connection with the server?
take care with the name user, times exchange get crazy: server/user or only user name for the user field...
Public IP
afterlife said:
Can anyone connect to VPN (PPTP) using WM5 via wireless or GPRS?? When i use my old XDAIIi or II, i can connect by now using WM5 i cannot.
Hope those can connect please share. tks.
Click to expand...
Click to collapse
Hi! I am not an Network expert at all, but here in Norway with one teleoperator we have to use a special access point name on My Work Network connection to get a public IP-address so Network accepts the connection. Perhaps nothing to do with your problem, but also we experience a lot of PDA users having no problem with pre-WM5 devices and much problems with WM5 devices and VPN
Hi,
I am trying unsuccessfully to connect to a PPTP VPN using the VPN client built into my new HTC TyTN II.
Wifi - I can connect using a WinXP SP2 laptop using wifi through my home linksys wireless router (which has PPTP passthrough enabled) using the standard Win XP vpn client. When I try with my TyTN II, I can browse ok but if I set up a VPN connection I get "VPN server problems. Verify your username and password, etc"
GPRS - If I try to connect over GPRS, I connect to Orange GPRS but when it tries to connect to the IP address of my VPN server, I get the same VPN server problem error message. (As a side issue, I asked Orange to enable my account for vpn which they did, sent a SIM update and told me to change my apn to 'internetvpn' instead of 'orangeinternet')
As I can connect through my wifi connected laptop, it seems to point to my WM6 vpn client but my forum searches suggest that the WM6 client works ok. Oh, and yes, I have checked that I am using the correct vpn username and password!
Any thoughts greatly appreciated - the ability to maintain some linux servers was my main reason for getting this phone!
_______________________________________________________
Phone - HTC TyTN from Orange
Windows Mobile 6 Professional
CE OS 5.2.1620 (Build 18125.0.4.2)
Processor QUALCOMM MSM7200-400MHz
Memory 101.63MB
Setings Device Information Version
Operator version 24.181.1.612
ROM Version 1.81.61.2.WWE
ROM Date 09/20/07
Radio version 1.27.14.32
Protocol version 22.45.88.07H
Bump!!! Same problem here. I have all the proper ports open on my router and still no luck.
I've been trying to resolve this with the people that manage my vpn server which is my case is a Watchguard firewall - apparantly Watchguard isn't compatable with PPTP on WM6 and they have suggested using IPSec and have provided me with a client (not that I've got that working yet either!)
I suggest you contact the vendor of your vpn server and ask them whether they are compatable and how a WM6 client should be configured. Post anything you find out here for the benefit of others.
WM6 don't connect to VPN over GPRS/ WiFi
Friends...
I have the same problem... the VPN server is Windows Server 2003... My PDA has WM6 (with in-build VPN client)... then VPN PPTP would work OK... but What is the wrong??
Regards...
I also could not connect on vpn over GPRS and got error message, but after I tested all installed programs I have found out that my SPB GPRS Monitor was the reason for the errors. So I killed it.
Now VPN over GPRS connects and looking into register I see that I am really connected i.e. I got DNS server IP, I got name of the local network and dynamic IP for my HTC, but nothing works. As I have found out from server guys they see me but my dynamic IP is not logged in server DNS, so no program sees me and I can not work.
Can somebody help?
Same
I have a similar problem but the difference is that i don't even receive an error message. When i click connect NOTHING happens!! The wifi i am using is an open network but I must connect to vpn to connect to the internet.
Please help as i really need to get this working...
I have been trying to iron this out with IT at my office as well. I have been trying to get WM6.1 VPN working for nearly a year.
I have a TyTnII and my IT office just bought some kind of WM6.1 Motorola/Sprint Smartphone as well which they actually asked me about setting up for them.
The problem what I am experiencing is that I CAN connect to the VPN server (I use one of the TaskMan progs that has ipconfig built it, and I am getting an appropriate IP from the VPN server). BUT I can't browse ANY intranet sites via PIE or Opera Mobile 9.5. Whenever I try to browse to an intranet site I just get nothing, browser does nothing for ~10min then gives timeout error.
I have heard that this has to do with an inbuilt error in the PPTP module of the VPN client that incorrectly makes VPN server requests using the IP address assigned by the GPRS/EDGE/3G/etc. connection rather than the IP address assigned by the VPN connection, obviously will cause problems!
Anyway, we are investigating 3rd part VPN clients...
Only IPSEC works
I also made many tries to get vpn working over BT PAN profile.
The only configuration which worked for my was IPSEC with the Safenet SoftRemote-LT Client on PC.
With the windows native pptp based vpn does not work .
I got the error code 721 what means that the GRE protocol (frame type 47 on port 1721) does not pass through. This seems to be the the real problem of the packet filtering components of the WM device. The problem is not related to bluetooth or PAN Driver, because it behaves in the same way if you try to do it over USB port. No way.
You guys might want to check out my post about getting my PPTP VPN working and actually syncing ActiveSync on a fixed schedule regularly over VPN.
http://forum.xda-developers.com/showthread.php?t=428878
Getting what you want to work over VPN requires work URL Exceptions so that the traffice is properly routed.
nkitson said:
I've been trying to resolve this with the people that manage my vpn server which is my case is a Watchguard firewall - apparantly Watchguard isn't compatable with PPTP on WM6 and they have suggested using IPSec and have provided me with a client (not that I've got that working yet either!)
I suggest you contact the vendor of your vpn server and ask them whether they are compatable and how a WM6 client should be configured. Post anything you find out here for the benefit of others.
Click to expand...
Click to collapse
Watchguard does support PPTP, your IT guys just need to configure it. As for IPSec which would be awesome because there is an app call Greenbow that will connect you over 3G doesn't work with Watchguard. You can only connect using their own client for it which needs a license and isn't support on Windows Mobile. They got a hate email from me for that crap.