CAB for 3D Phone Pad - JASJAR, XDA Exec, MDA Pro General

Does anyone have the CAB that changes the "Standard" phone pad buttons into the 3D-like ones? I think the CAB is part of the ext ROM included in the just-released JasJar image, but I do not want to install the whole ext ROM just to get the cool-looking buttons.
Nevermind, found it....

what does it look like. Can you post a screen shot.
where is the cab. What is it called
steve

what does it look like. Can you post a screen shot.
where is the cab. What is it called
steve

I use the .cab called Default_MP_Enable_VT_RTPlugin_0727_2_signed.CAB after which You need a softreset to get it to work. This file is still in the new Rom as well.
If You want the standard iMate 3D look it is OK.
It works less good (skinnable) than before. A few files can be changed and a few do not give a reaction anymore if You change them.
For me the files clg_in.gif, clg_miss.gif, clg_out.gif and spd_lst.gif do not work even if changed to a new look. The rest of the look can be changed still.
Hope that helps
Ruud

Thank you for the info

Related

Universal Silver / Black Phone Skin + Carrier's

I made silver phone skin for Universal.
The screenshot shows Japanese, but you will see English if you use English ROM.
Enjoy!!
Jun-03, 2006
Added Black one.
Again, the letters depends on your ROM or mui setting except for "Video".
Jun-08, 2006
I found some people wants carrier's.
You will see them on FTP/Upload/Universal/Phone Skins
You can the following phone skins:
Qtek 9000/i-Mate JasJar/Dopod 900: Qtek_Phone_Skin.cab
O2 Xda Exec: O2_Phone_Skin.cab
T-Mobile MDA Pro: T-Mobile_Phone_Skin.cab
Vodafone v1640: Vodafone_Phone_Skin.cab
Orange SPV M5000: Orange_Phone_Skin.cab
Again, the characters on buttons depand on your mui setting.
Enjoy!!
June-21
Uoloaded carrier's on this thread.
Very nice, but this has to be installed in the main memory to work, thus taking up our precious memory.
very nice , can you pm me how to make it :wink:
thanks
cktlcmd:
Yes, this cab file is too big just to change phone skin. It would be possible to use skin files in storage after changing registry.
I recommend cooking your own ROM with your own skin (or mine). (Of course, you cannot use carrier's in this case.
mwang:
There are many *.bmp files used for phone skin. I haven't perfectly found which bmp file is related to each button.
Only with this change, you cannot change "Video" button. The *.dll files (phcanlrc.dll & phcanprc.dll) have resources for "Video" button. You have to change it if you want to change "Video" button.
You will need to change resources of "phcanOverbmp.dll" if necessary.
As for registry, you will find many keys under [HKEY_LOCAL_MACHINE\Security\Phone\Skin]
shugoh said:
mwang:
There are many *.bmp files used for phone skin. I haven't perfectly found which bmp file is related to each button.
Only with this change, you cannot change "Video" button. The *.dll files (phcanlrc.dll & phcanprc.dll) have resources for "Video" button. You have to change it if you want to change "Video" button.
You will need to change resources of "phcanOverbmp.dll" if necessary.
As for registry, you will find many keys under [HKEY_LOCAL_MACHINE\Security\Phone\Skin]
Click to expand...
Click to collapse
THANKS will try it.
Not bad.
How to make s cab setup file? I think I would make a new one for myself.
I made this cab file using WinCE CABManager v2.0 released from OCP software at www.ocpsoftware.com
shugoh!
I can no find any carier's skins on FTP ?? at least today they are not there,
Can you advise? Please
It seems someone deleted phone skins on FTP.
I'll upload skins as many as possible on this thread.
Files are ZIP compressed.
Qtek.zip
  Qtek_Phone_Skin.cab
    Qtek 9000/i-Mate JasJar/Dopod 900
O2.zip
  O2_Phone_Skin.cab
    O2 Xda Exec
T-Mobile.zip
  T-Mobile_Phone_Skin.cab
    T-Mobile MDA Pro
Vodafone.zip
  Vodafone_Phone_Skin.cab
    Vodafone v1640
Orange.zip
  Orange_Phone_Skin.cab
    Orange SPV M5000
shugoh!
I have tryed to run one of the files on an Emulator and the Emulator HArd resetted itself. Have you got any idea ??? will that happen with the device also ? PLus does it really mean that you can get rid of the ugly t-mobile phone skin but keep the Video button ??
Churchill:
I've never run these skin files on emulator, but these worked fine on my Qtek-9000. I also can swich skins with these cab files. I have no idea why these skins shut off your emulator.
Regarding "Video" button, these are included in dll files in my cab file. You can modify or replace it to another one. It would be possible to use T-Mobile "Video" button only. (i.e. use Vodafone skin and replace dll to T-Mobile)
P.S. I don't think T-Mobile's is ugly but this is only a taste.
hard reset problem <Emulator
i guess OS on emulator didnt have 3G function.
so relative files of 3G function, such like follows confilict with its owns.
phcanprc.dll
phcanOverbmp.dll
phcanlrc.dll
phcanhtc.dll
phcanrc.dll
anyway, shugo's sikins are for the Phone with 3G,
should not use on Non-3G phone.
You might be right abou that Asukal
Thanx
Best phone skin so far??
I've seen this phone skin...I love it...
And I've used the search function on this site, but can only find it available for smaller screen HTC devices... ie; KJam :x It does not work on the Universal.
I'm no expert, but can someone explain to me how (in idiot's language please) I can recreate this skin for the Universal?
I can use Photoshop easy, so once I figure out how to extract the relevant gif files, I can alter the buttons quite easily....
If someone can explain it to me, I am willing to email / post the results back here...
Here's what the skin looks like...
try spb dialer skin
hi all..
for those who is really bored with the original dialer skin,..
y dont u check the spb software house site..
they give a few free skin (it's made for their spb software actually)..
but the they still give the free dialer skin..
me myself use one of their dialer skin, quite ok though..
dunno if it's works with ur machine, but mine (xda IIs), not a single problem...
eventhough the site said it's not working on wm2003se..
okie...
Which of the 3 looks better?
I placed the *.BMPs into unlocked ExtendedROM
CWKJ said:
Which of the 3 looks better?
I placed the *.BMPs into unlocked ExtendedROM
Click to expand...
Click to collapse
The Black one looks great.
A Quick question :
What's the program that makes those cool icons on the taskbar, and is it fast..??
dark_hawk said:
The Black one looks great.
A Quick question :
What's the program that makes those cool icons on the taskbar, and is it fast..??
Click to expand...
Click to collapse
"Wisbar Advance 2", you have to download from Wisbar website.
But you need to download the Theme from the web (done by somebody) it is call Pocket OsX.
http://members.chello.nl/ddelug/skin.htm
Be warn that Wisbar will slowdown the PPC a little bit.
I think the new dial pad from CrossBow Theme looks better.
how on earth do you change the keypad skin on a universal without going to registry all the time i thought its meant to chnage with the theme.
regards
I actually did registry edit almost manually.
First I copy the keypad related registry out into *.REG files. Keep this as a backup and make another copy to do a text edit and modified it manually. Basically the filenames are the same, I put the new skin in the extended rom, so I need only to change the texts "\Windows\" to "\ExtendedRom\Windows\". Afterwhich I copy the new *.REG back into the registry. Soft reset and NEW DIALPAD SKIN.

Orange Today Plugin

Hi guys,
I was trying different ROM's on my Universal today, to see what the different operators were offering. When I came across the Orange Today Plugin. I like the idea of it, but not the setup.
So, I was wondering if anyone here knew how to add, remove, or change the items in this plugin ?
I did a little search of the forum for an answer to this question, but it seems i'm looking to do the opposite to what everyone else is doing.
re
could u be more specific...
In this screen dump, you can see the plugin.
I'd like to be able to change the selections and the links in each selection.
For example, change the five links in the Web selection of the screen dump to five of my own URL's.
Or better still, add or replace one of the selections in the plugin with one that points to My Device. That when highlighted would have links to 'My Docs' 'SD Card' 'Program Files' etc.
I hope that makes sence.
I'm searching the same solution.
I'm searching the same solution.
Hi filippodisvevia,
I fonud how to change the URL's, but not the sections.
Look in your Windows folder for a file called Full_one.xml, the URL's are at the top and the link names are near the bottom.
Good luck :wink:
thnx
ZaForD said:
Hi filippodisvevia,
I fonud how to change the URL's, but not the sections.
Look in your Windows folder for a file called Full_one.xml, the URL's are at the top and the link names are near the bottom.
Good luck :wink:
Click to expand...
Click to collapse
Thank's so much.
I'm starting 8)
I haven't Full_One.xml
I use only the plug-in extracted by the orange rom.
Some other ideas ?
hi, where can i get this plug-in? and can i install this or t-mobile rom ?
cheers, cudo
cudo said:
hi, where can i get this plug-in? and can i install this or t-mobile rom ?
cheers, cudo
Click to expand...
Click to collapse
Hi cudo,
Here http://forum.xda-developers.com/viewtopic.php?t=61711&highlight=today+plugi+orange you can file the cab e some other file.
I'd like to personalize the cab if I understand how it work.
It works on qtek 9000\jasjar\xdaexec so I think is good for t-mobile too.
Hi Guys,
That plugin is from the SPV M3100 and works diferently to the Universal version. See my post at the bottom of that link above.
If you want the proper Universal Today Plugin with bigger icons for the Universals bigger screen. You'll have to install the Orange M5000 ROM, as its built into it. Plus the Orange ROM has just been updated with a new Radio driver.
I'm using the new Orange ROM, with the last O2 Ext ROM, and the Signed_ORUK_HomeScreenReg.sa.CAB from the Orange Ext ROM as it has the Reg settings for the plugin. And everything is working great. 8)
ZaForD said:
... Signed_ORUK_HomeScreenReg.sa.CAB from the Orange Ext ROM as it has the Reg settings for the plugin. And everything is working great. 8)
Click to expand...
Click to collapse
Can you attach the cab ?
:thx:
I downloaded the cab from ftp, and install it, but nothing seems to hapen
I have T-mobile base rom and Qtek extended rom installed...
Hi people,
This thread is more usefull if you are looking for a cab file.
http://forum.xda-developers.com/viewtopic.php?t=61711&highlight=
I installed the cab posted and works fine on my wizard. Although u do lose all your other today plugin functionality. But the plugin is handy. even though limited in use.
I was thinking of finding some great developers on this site who would like to creat such a program but which could be used alongside the other today plugins. Anyone interested let me know.
Cheers,
Shah
What do you mean "finding some great developers"?
@filippodisvevia,
Heres the CAB file, but it ONLY works with the Orange ROMs. As the files needed aren't in the other ROM's.
@gtm55,
You need the Orange ROM installed before the CAB file will work.
filippodisvevia said:
What do you mean "finding some great developers"?
Click to expand...
Click to collapse
Great or good developers. Who are able to program such a plugin. because u have beginner programmers, novice programmers, and advanced programmers and if you like great programmers.
Just to keep it simple a person or persons who are able to create such a apps, which is usable in different WM phone devices. I just used great, because I know there are some pretty great (good) programmers on this site.
Cheers,
Shah
Thank you, ZaForD, I really like Orange plug-in, but I'll stay with T-mobile (1.30.115 WWE).
Thank's so much fora cab Zanford
@shah2
Now understand.
Every help will be fine.
:wink:

How to switch to Diamond clock in Cruise ?

Hi all,
I want to switch from the original clock that are default in Today screen in Cruise to something that looks like the Diamond clock.
That is all I want to do, i don´t want to change the entire interface only the clock.
Is it possible and how do i do it ???
Thank you guys, you ROCK !!!
//Peter
Ps,
Why do i want to do it?.. Simply because I'm getting tired of seeing that same old clock, day in and day out.
the clock is made of images stored in windows directory or in htc home dir.
You can search for diamond style htc home packs, open the files and copy into your pda only the files corresponding to the digits.
Thank you for the quick response.
However, I'm kind of a noob and would very much like to get some solid advice on to what to copy and to where and what to delete and so on...
Othervise I will **** things up and be stranded with a screwed up home screen
Cheers,
//Peter
HTC Home Customizer
is the name of the game
http://www.pocketemu.com/download4.html
(for free)
then you need a diamond clock skin such as LPASO's (look for in this forum).
I did it myself - it works very nice.
cool, thx
I will try it out, this was exactly what I was hoping for
edit:
Sorry to bother you guys with this but i only find a cab for the entire diamond theme.
http://forum.xda-developers.com/showthread.php?t=404415&highlight=LPASO
Can anyone point me where to find only the diamond clock skin ?
again thank you,
//arcspin
Get it here:
http://forum.xda-developers.com/showthread.php?t=393451
and remember, you need HHC v1.0.
As much I like the software HHC it is huge just for me to switch the clock skin.
Is it possible to replace to original .png files for the standard clock to the .png files in the clock folder found in the "Diamond_HHC_Theme.zip" ?
That way I don't have to take up 4mb of memory just to switch clock skin.
First of all, is it this simple ?
Secondly, if it is that simple, what are the .png files named that are the standard clock skin and were do i find the on my TC?
Many Thanx,
//arcspin
If you find files need to change and give me place to change, I will make for you (cab) I create allready for dailer in diamond style only for original wm.6.0 rom you can check my 4shared.
this HTC Home Customizer not work for me
I am also looking how to my original HTC Home plugin make with more buttons still only 4, and look close to diamond
Still With Original Rom....
Once you have setup your clock & the rest (icons etc.) in HHC, you can get rid of the program and all its files (ie, uninstall & delete directories) and still keep the custom cofiguration of HTC HOME, which is saved as a set of files in \windows folder.
That way you can save that 4MB+ of memory, and still keep the diamond clock, but you cannot customize HTC home any longer.
YES!
Luckily and to save you doing a search (please search forums first it wil save you getting ripped) i have attached below.
Unzip them and copy to your HTC home file on your device. Copy and paste in the correct place and it will replace the files only to do with the clock and nothing else.
Please make sure you do a backup of the HTC folder on ur device before copying new ones, just incase you f#@k things up!!!
I always copy folders or files to a TEMP folder on my sd card, if you play alot and you make a mistake (and you will) then you have a life line!!
Also HHC customiser does not work with original HTC plugin, you have to unistal and use HHC one, which is kool, but may invalidate your warranty. For a noob i would just use the clock face files for now.
Have Fun!
Thanx Timmy and you all for this nice info.
Yes, of course one should do a search, my bad.
It was also my bad that I didn't quite understand if it was just to replace some .png files or if I had to do something else as well.
Now, that you have explained it to me it looks like a simple operation for sure.
Thank you and I will back up my files....god advice *smile*
cheers,
/arcspin
cab from file on first page except wallpaper
http://rapidshare.com/files/135827060/Diamond_HTC_Home.cab.html
Just tell me have place to copy this (diamond wallpaper) and it's apply automatically after restart ?????????
JAYmasta said:
cab from file on first page except wallpaper
http://rapidshare.com/files/135827060/Diamond_HTC_Home.cab.html
Just tell me have place to copy this (diamond wallpaper) and it's apply automatically after restart ?????????
Click to expand...
Click to collapse
Jay,
If you want to customise HTC home fully, ie with 6 tabs and change the icons etc use HTC customiser, search for it here.
If full customisation is not important but want fully functional 6 tab, use the cab file attached which i got from a wm6.1 Rom on here.
Hope i understood you properly ;-)
I want start-settings-today-items- and push (htc home) and I lkie (options) button become active (and choose how many tabs i like)
this cab can help me ???
i use original rom with 4 buttons
Jay,
You cannot customise the default HTC home which comes on the Touch Cruise.
If you want options for how many tabs you want you will have to unistall HTC Home on settings/remove programs. then do soft reset.
You can then try HHC customiser (do a search for link) or try the cab file i posted. This will install a cooked version of HTC home which you can then choose number of tabs and the order.
The good news is , if you dont like any of the "cooked" versions you can do a hard reset and u then have original one back again.
What ever you do, do a full backup using sprite software that came with the phone before you do anything!
My friend can you post this sprite becouse I don't have? I saw on www.htc.com downloading for diamond but I can't take (other serial)
No can do bro, it came with the device on a cd. If you dont have the disk google it and purchase the lite edition, it does what u need and is pretty cheap 20$??
Its a good backup and has got me out the ****e when playing around.
This cab which you gave almost good but music tab start windows media player and not active buttons after in home plugin
maybe I have I never chek cd

syrius Goodies! (edit: Touchflo2D related)

//edit: I edited the Topic name so that all people using TouchFlo2D rather than only people using udKsyrius come and check this out. Most of the skins that are released/going to be released are actually more TF2D related than syrius.//
First off, I want to thank udK for the great rom. It has its flaws but Im sure you will fix this. Anyway, I wanted to contribute to this beautiful design so I made an image and an animation for the boot sequence that match the syrius look, the last "WM61" image is vista inspired. Hopefully udK will use the "udKsyrius.bmp" in ROMUpdateUtility in his future syrius roms, no offence. The .zip is attached at the bottom of this post.
Note: The preview is here to give an idea of the sequence and is not like the real thing which is a bit faster and better.
-----
I do not take responsibility for anything that might go wrong during the following steps. I had no problems trying this out and neither should you.
1. Extract the all files.
2. Connect your Polaris to the PC.
3. copy files "WM61.png" and "syrAnimated.gif" to "\windows\" directory
4. Use a registry editor (like PHM registry editor) and modify the following keys:
(a) "\HKLM\Software\HTC\HTCAnimation\StartupGif\" to "\Windows\syrAnimated.gif"
(b) "\HKLM\Software\HTC\StartupAnimation\GIFFile\" to "\Windows\syrAnimated.gif"
(not sure what the difference between (a) and (b) is but when I only changed one of them, can't remember which one, the animation was not updated)
(c) "\HKLM\Software\Microsoft\Splash Screen\MSBitmap\ to "\Windows\WM61.png"
(d) "\HKLM\Software\Microsoft\Splash Screen\CarrierBitmap\ keep? "\Windows\welcomehead96.png"
(not sure what this last one (d) does, doesnt seem to do anything in the syrius r0 rls. I did not change this key)
5. Last but not least you open the "ROMUpdateUtility" folder and flash your Polaris with the "ROMUpdateUtility.exe".
(note: even though this is a very simple step you should not do it if you are not familiar with flashing ROMs.)
Password:
liquidice
-----
Also, I have an iContact and a S2U2 design in the same look as Touchflo2D and then an, in my opinion, visual improvement to the TF2D digital clock. All this will be given to you in the next couple of days. Dont hesitate to suggest other apps where the TF2D look can be applied. If this is a program that is popular or I could find usefull then I would be happy to make a skin.
26sept 2008
Touchflo2D digital clock improved looks with whiter digits.
(note: zip is attached to first post)
Default (L) vs ice-digits (R)
In the default version of the digital clock all the images are transparent but in the ice-digits the numbers and the colon is non-transparent making them whiter. Since I dont use the AM/PM image I left it as it is, also it can be a nice look to have it a bit transparent while the numbers are white. I used the same font so there should be no other difference in looks other than the ice-digits being whiter and because its in a zip file you can combine it to your own liking having the colon transparent if you want.
-----
I do not take responsibility for anything that might go wrong during the following steps. I had no problems trying this out and neither should you.
1. Extract the files.
2. Connect your Polaris to the PC.
3. Copy file "hh_hm_colon.png" and files "hh_hm_digit_X.png" (note X=every number) from "ice-digits" to "\windows\"
(If you want to go back to the default look do step 2. and 3. but use the files from the default folder)
Password:
liquidice
-----
26sept 2008
iContact (v0.8 - supware.net) skin inspired by Touchflo2D
(note: zip is attached to first post)
All people view (L) and Contact view (R)
I let the pictures speak for themselves...
-----
I do not take responsibility for anything that might go wrong during the following steps. I had no problems trying this out and neither should you.
0. Download and install iContact by searching this forum...
(note: this skin was designed for "iContact v0.8 - supware.net"
1. Extract the files.
2. Connect your Polaris to the PC.
3. copy files "syrius.png" and "syrius.skn" to "\Program Files\iContact" directory
4. Start the iContact settings on your Polaris and set skin to "syrius".
Password:
liquidice
-----
S2U2 skin coming soon...
(2) Reserved for future releases!
(3) Reserved for future releases!
Nice good work
Nice initiative!
I am trying to get t9 in other languages with a cab specifically for syrius. My first goal is Dutch, but other languages should be easy once I got one working. But I have some difficulties, for instance the shareware version of wince cab manager doesn't support importing of reg files. Are there programs better capable of handling cab files? I don't find it worth 100 bucks...
The cab I'm working on is based on the Modaco multilanguage pack. It got all the kdb files needed, I just need to get the registry changed correctly...
kartus said:
Nice initiative!
I am trying to get t9 in other languages with a cab specifically for syrius. My first goal is Dutch, but other languages should be easy once I got one working. But I have some difficulties, for instance the shareware version of wince cab manager doesn't support importing of reg files. Are there programs better capable of handling cab files? I don't find it worth 100 bucks...
The cab I'm working on is based on the Modaco multilanguage pack. It got all the kdb files needed, I just need to get the registry changed correctly...
Click to expand...
Click to collapse
Can you make one for Arabic support? Would be appreciate it !!!
looks nice - apart from the windows logo...
thanks man! this is very cool
very nice splash gif
kartus said:
Nice initiative!
I am trying to get t9 in other languages with a cab specifically for syrius. My first goal is Dutch, but other languages should be easy once I got one working. But I have some difficulties, for instance the shareware version of wince cab manager doesn't support importing of reg files. Are there programs better capable of handling cab files? I don't find it worth 100 bucks...
The cab I'm working on is based on the Modaco multilanguage pack. It got all the kdb files needed, I just need to get the registry changed correctly...
Click to expand...
Click to collapse
Ok man, but I dont know very much about that kind of stuff. I have designs and skinning as a hobby and in that field ask me anything, but other than that I dont know very much. Al I can say about your issue is that I tried a swedish t9 and now none of the t9s work but I dont think that is any help at all...
Update!
Touchflo2D digital clock and iContact skin uploaded, watch first post!
I got different languages working on different roms other than syrius, but the strange thing is that because of the differences between the roms there isn't a global solution. First I have to get it to work with syrius and then I'm going to make cabs for different versions.
It's going to take some time, I have to do it in my spare time
A total of 142 downloads but only a few comments...
I guess this is going to sound kind of pathetic but I want som friggin feedback... I dont see the point of releasing anymore of these skins if theres barely any reaction to it.
Peace!
iContact Theme
Liquidice said:
A total of 142 downloads but only a few comments...
I guess this is going to sound kind of pathetic but I want som friggin feedback... I dont see the point of releasing anymore of these skins if theres barely any reaction to it.
Peace!
Click to expand...
Click to collapse
Here it is - my critical comment. )
I`d downloaded and installed theme for iContact and dicovered a problem on Sirius R0 - that bottom butts are not skinned, they are workin fine but with incorrect images above.
(when i`ll know how to attach pictures i would place the screnncapture with the bug)
Go to: http://imageshack.us/
Upload your picture and post the link in here.
Liquidice, what verision of iContact do you use? Coz your skin doesn't work with iContact Burt Edition.
Nice skinz, thank you! Waiting for further customization.
Vannjjaa said:
Liquidice, what verision of iContact do you use? Coz your skin doesn't work with iContact Burt Edition.
Nice skinz, thank you! Waiting for further customization.
Click to expand...
Click to collapse
Thx, mate.
Im using "iContact v0.8 - supware.net" and as far as I know this is the only version Its been tried on.
(added to first post)
btw. Whats different in Burts edition, is it better than v0.8?
Should I maybe do a skin for that one?
http://forum.xda-developers.com/showthread.php?t=402724&highlight=burt
It has much more functions. It would be nice, if you'll create a skin for it.
And what about skinning in Mannilla2d style G-alarm (http://forum.xda-developers.com/showthread.php?)t=422362&highlight=g-alarm?
liquidice, your clock fix was well received! thank you!
i use itje's touch-it 3.5 rom, and installed icontact 0.8 and applied your skin and clock fix and all work fabulously! kudos!

[APP] PLAzmA Manila Rhodium VGA Comm Manager Skin (BETA 1)

Having recently installed XBmod Manila Rhodium VGA Port (here) i was annoyed that my comm manager skin was still the stock O2 blue skin
I search for ages to try and find someone how had made a black one, the closest i came was this which isnt black and this which had render issues and had the white left buttons, so it might not be perfect but i made one.
If anyone has any suggestions or the original Manila Rhodium VGA background on its own please send it and your suggestions over and i will see what i can do.
Also ive design this so it will just replace your existing skin and not change the existing options on your comm manager page like add the 3g button if you dont already have it.
PS ignore the background looking so crap in the screen shot, this is largely because of soti pocket controllers preview mode being a lower colour base.
MIRROR Standard: http://rapidshare.com/files/213416974/PLAzmA_Rhodium_VGA_Comm_Manager.cab.html
UPDATE: (3G)
I have also created, a version which will enable a 3G option in comm manager, personally i dont use 3G so i didnt bother writing it in but im sure some people will want to have it
MIRROR 3G: http://rapidshare.com/files/213485222/PLAzmA_Rhodium_VGA_Comm_Manager_3G.cab.html
Issue: after installing this onto my device the background of the Comm Manager is still white, along with white font color and dark icons as in your screenshot.
plazma247 said:
Have you done a soft reset ??
Also what phone and rom are you running it on?
As far as i can see from looking at other skin cabs the background files are always called P_BG.png and L_BG.png and are not set by a reg key and called by comm manger program directly.
Please post problems / answers to the comm manager thread instead of xbmod's thread as its a bit off topic thanks.
Click to expand...
Click to collapse
ROM udK Syrius Topaz R2 + XBmod Manila Rhodium (see sign).
Yes, I did soft reset my device.
doh
sibbor said:
ROM udK Syrius Topaz R2 + XBmod Manila Rhodium (see sign).
Yes, I did soft reset my device.
Click to expand...
Click to collapse
sorry chap missed that, umm strange, do you have reg editor ?? could you try importing the attached reg file and then soft reset
plazma247 said:
sorry chap missed that, umm strange, do you have reg editor ?? could you try importing the attached reg file and then soft reset
Click to expand...
Click to collapse
"CommManagerUIStyle" was set to 4 instead of 2 as in your provided fix.reg. I'm waiting for my device to startup as I type.
Btw, can you recommend a good register editor for VGA devices? Used PHM, but wasn't able to import your reg file.
EDIT: yepp, by changing that value from 4 to 2 I'm able to view the black background. Thank you =)!
sibbor said:
"CommManagerUIStyle" was set to 4 instead of 2 as in your provided fix.reg. I'm waiting for my device to startup as I type.
Btw, can you recommend a good register editor for VGA devices? Used PHM, but wasn't able to import your reg file.
EDIT: yepp, by changing that value from 4 to 2 I'm able to view the black background. Thank you =)!
Click to expand...
Click to collapse
No worries umm personally i use soti pocket controller however i think the reg files for that and phm are incompatible, oh well ive included the fix into the cab file and re-uploaded to the first thread
the download link for the cab is dead.
iceblade911 said:
the download link for the cab is dead.
Click to expand...
Click to collapse
Works for me, but posted a mirror anyway.
can you make one for wvga blackstone please?
djcedric said:
can you make one for wvga blackstone please?
Click to expand...
Click to collapse
Sure if you can find me any other comm manager cab thats wvga i will strip it apart and rebuild it to support the Rhodium skin, i looked and havnt found one yet.
Alternativly if you can extract me the following files from your windows folder:
Function_Bluetooth.png
L_BG.png
P_BG.png
and give me a registry export of :
HKEY_LOCAL_MACHINE\Software\HTC\CommManager
and all sub keys zip/rar them and send them over, i can then rebuild back into a cab, i need the registry key as ive not got a blackstone and need to double check the reg values
djcedric said:
can you make one for wvga blackstone please?
edit:works on wvga,have tryed it
Click to expand...
Click to collapse
Nice one i dont suppose you can post me a screen shot of what it looks lik on wvga, dont worry if you cant just intrested.
Cab didnt work
Hi ,
Tried to install the cab but fails immediatly with when i just pressed the cab file.
My phone : Raphael unbranded Netherlands
ROM: ROMeOS 1.90.1
Radio 1.12.25.19
Only thing that I could imagine is my other commanager from nadavi that adds the 3 g is corrupted with this version.
hivesnl said:
Hi ,
Tried to install the cab but fails immediatly with when i just pressed the cab file.
My phone : Raphael unbranded Netherlands
ROM: ROMeOS 1.90.1
Radio 1.12.25.19
Only thing that I could imagine is my other commanager from nadavi that adds the 3 g is corrupted with this version.
Click to expand...
Click to collapse
I would make sure your comm manager isnt running in memory when you install, ive actually made the pack so it has a 3g and ir option if you have already modded to get 3g or ir to appear on the comm manager.
However if you want to uninstall nadavi version, ive made a 3g version especially for you see the main thread for download.
I'm sorry, but I can't seem to actually use my Comm-Manager since I installed yours. The style is awesome for sure, but it's not very usable at the moment:
Clicking on an item highlights the current item, but does nothing; no toggling of Bluetooth or WiFi...
Clicking on the ON/OFF button for a function doesn't function either... same as above
In Rhodium Manila when I press the title for WiFi or Bluetooth the device vibrates and I'm taken to scanning mode (scan for AP's or BT devices)... this functionality is also gone.
EDIT: and I can't seem to uninstall it either. Typical
Uninstall
Not sure whats going on there, try and re-install over the top, it will tell you old version will need to be removed, say yes and then cancel the install when it comes to reinstall.
what rom are you running ?
Actually ive just noticed that since ive install XBmod latest manila pack im also unable to uninstall anything i put on, this it maybe a big in his pack, only noticed after i install wififofum today and its not on the list either.
plazma247 said:
Not sure whats going on there, try and re-install over the top, it will tell you old version will need to be removed, say yes and then cancel the install when it comes to reinstall.
what rom are you running ?
Actually ive just noticed that since ive install XBmod latest manila pack im also unable to uninstall anything i put on, this it maybe a big in his pack, only noticed after i install wififofum today and its not on the list either.
Click to expand...
Click to collapse
udK's ROM (see sign)... Yeah, must be XBmod's Manila... can't seem to uninstall any other app I've installed either. Damn, but oh well =)
So you're using XBmod's Manila and are able to use all the functionality within the CommManger? I suppose the regkeys are within the CAB file? Otherwise, is the values in fix.reg those you're using?
Idea
sibbor said:
udK's ROM (see sign)... Yeah, must be XBmod's Manila... can't seem to uninstall any other app I've installed either. Damn, but oh well =)
So you're using XBmod's Manila and are able to use all the functionality within the CommManger? I suppose the regkeys are within the CAB file? Otherwise, is the values in fix.reg those you're using?
Click to expand...
Click to collapse
Yeah its working fine on my rom and the cab now includes whats in fix.reg which basically sets the comm manager mode to the right them to use a background wallpaper.
If you try and re-install over the top, it will say you have to remove before it can reinstall, allow i to remove, then cancel the new installation. soft reset and your old comm manager skin is back.
if you can then give me an export of :
HKEY_LOCAL_MACHINE\Software\HTC\CommManager
i can look into it and see what the problem is, potentially i can rebuild you your own cab if theres something particular with your rom.
sibbor said:
I'm sorry, but I can't seem to actually use my Comm-Manager since I installed yours. The style is awesome for sure, but it's not very usable at the moment:
Clicking on an item highlights the current item, but does nothing; no toggling of Bluetooth or WiFi...
Clicking on the ON/OFF button for a function doesn't function either... same as above
In Rhodium Manila when I press the title for WiFi or Bluetooth the device vibrates and I'm taken to scanning mode (scan for AP's or BT devices)... this functionality is also gone.
EDIT: and I can't seem to uninstall it either. Typical
Click to expand...
Click to collapse
Same here - Using Cloudy's v1.1 ROM.
halpmf said:
Same here - Using Cloudy's v1.1 ROM.
Click to expand...
Click to collapse
That's exactly what happens to me with the ROM in sign. Will update ROM soon, so I can report back.
worked great for me. thanx again plazma, cant wait to see what you come up with next! still lovin the calculator!!
New Developments
I think your getting the green bars more than once is because your rom must use more than one colour for transparency on my dev phone only #000000 (true black) is used for transpency, so the comm manager is slightly off black to work around this, work fine on mine and for others aparently. So i can only assume the people having problems with their roms is due to the above.. not sure how to fix it but will look into it.
redd214 said:
worked great for me. thanx again plazma, cant wait to see what you come up with next! still lovin the calculator!!
Click to expand...
Click to collapse
Well after the black calculator ive started and nearly completed a black dialer skin to match the calculator... ive got a small bug on landscape but might post it later this week if i cant figure out how to get around it.
Until then heres a screen shot

Categories

Resources