Database Users

Missing Bluetooth icon after using PIToday

Hi guys,
I've been playing with PIToday for a couple of days now but I noticed one thing: My bluetooth icon on the Today screen disappeard after using PIToday. The only way to get it back for me is unchecking PIToday and soft reset. This is a bummer!
I've been checking some sites for solutions but could only find the solution mentioned above and one solutions for a 3870. This was putting a shortcut to the bluetooth icon in the startup folder. In the case of a MDA II, there is no such shortcut possible. I checked the registry and Windows directory but the is no .exe file which will start the bluetooth icon. Only .dll. But I don't know where to point it to. :?:
Any other suggestions? Because I would like to buy PIToday but I still want to access my bluetooth from the Today screen.
Wouter

Even though I am a huge fan of Pocket Informant, i experienced a lot of issues with the PI today plug in and stopped using it. It may be incompatability with other software I also have installed but as well as the missing BT icon it also caused instability (lock ups) and the occassional auto soft reset.
In regard to the missing BT icon though PI today is not the only culprit. Users of Pocket Breeze from SBSH Mobile software have reported the same issue. Only way to restore it is unselect the today plug in and soft reset.
Ed

Hi Ednap,
Somebody suggested a sort of sulution for me: Using Zenphone. In Zenphone there is an option to turn bluetooth on and off in a profile. And it seems to work!
It is not the solutions but a least it is workable.
Wouter

hi,
some kind of solution
get the tool "No Plugins today" (h**p://www.ictinus.com/NoPluginsToday/)
install it (of coz)
insert into your registry a new string like this
HKEY_LOCAL_MASCHINE\init\LaunchXX where XX is the highest number of the Launch under INIT (I use "Launch90")
enter as the stringvalue the path to the tool e.g. "\Storage\NoToday\NoPluginsToday.exe" or whereever you have installed the tool
insert a link under \Windows\startup or \windows\autostart (depends of the language) and point it again to this tool. Rename the Link in such way, that it will run last (eg. "XXXNoToday")
ok, thats all, reset your device, and enjoy your Bluetooth icon
It is not a failure by any of the Today-Plugins, which make the icon vanish, it's just a timeout of the btdll, caused by Plugins, which need too much time to initialize itself, so the icon just nor appear.
What does this thing?
after reset it removes the todayscreens, the bluetooth icon appears, and after that the notoday-tool switches the plugins on again.
you need some more time (3-4 secs) after the reset, but, who cares, you got the icon back
my2cents
Dejan

Nice work, IvkovicD!
I'll give it a try and I'll post this solution also at the PIToday forum. I'm sure this solutions is a great help for Deje the maker of the program.
B.t.w I tried SnoopSoft Dash Today Advanced today to see if I like it. It is not bad. A bit slow but guess what happens?
My headset profile is now gone! First I thought it was because I had too many Todayplugins but after removing a few and soft resetting it still wouldn't come back. Any suggestions for this one?
Thanks,
Wouter

To create a shortcut to Bluetooth copy the following into a shortcut file (text file with lnk extension i.e. Bluetooth.lnk):
34#\windows\ctlpnl.exe cplmain.cpl,23
and copy it across to your PPC
My headset profile is now gone!
Click to expand...
Click to collapse
Might it be that your profile is just gone from the Today screen? Check Settings>Personal Tab>Today>Items Tab and see if Profile is checked.

Hi Mark,
No. The headset profile was not there anymore in the list. I contacted Chris Scott, who makes DashToday and the only solution he had for now, was to uninstall the program.
Not realy a good option in my opinion.... Especialy because I just bought the program because there is no trial avaliable.
For your other solution:
I want to make sure that I realy understand. You want me to make a textfile and name it i.e Bluetooth.lnk. In this file there should be the line:
34#\windows\ctlpnl.exe cplmain.cpl,23
Then copy this file to my PPC and presumably to the startup directory?
Just want to make sure.
Thanks,
Wouter

Then copy this file to my PPC and presumably to the startup directory?
Click to expand...
Click to collapse
Copy it to the Start Menu folder. It won't bring back your bluetooth icon back but you will be able to access the settings from the start menu.

Thanks,
I give it a try later.
Wouter

wouterk said:
First I thought it was because I had too many Todayplugins but after removing a few and soft resetting it still wouldn't come back. Any suggestions for this one?
Thanks,
Wouter
Click to expand...
Click to collapse
Hi,
I know this effect. I've have this "vanishing", too, if I install too much today- plug ins. Just grab your favourite registryeditor and delete some build-in today-registry entries for today items, e.g. original-task, or some of the other build in ones. If you need it (I don't believe that , make a backup, but really, do you need them?)
reset your device, the missing plugs should appear again...
Sometimes, the OS just do not display some today-plugins, if there are too much entries into registry, even, if you do not activate them...maybe at MS nobody thought that someone needs more then 5 todayplugs at once...
just joking
l8er
Dejan

Hi Dejan,
Sounds like an interesting solution. Want to give it a try but I can't find the path to the right regkeys. :?: Do you know were those keys are to be found?
Wouter

Hi Dejan,
I found the reg keys. (HKLM\Software\Microsoft\Today) and deleted the Task, Calendar and Owner Info keys. Then I did a soft reset but my Bluetooth icon didn't reappear.
Too bad.
Did it work for you?
Wouter

Vijay555 tools

Sorry not sure how to use the tools on Vijay's site, i've installed the VJPhone tools, which creates a few shortcuts in a folder, now do i edit these shortcuts or what? if so how, and how do i put these shortcuts on my Today screen.
thanks.

ump, have a look here
http://forum.xda-developers.com/viewtopic.php?t=26972&highlight=vjsms
Basically, you first need an explorer that will edit shortcuts.
I highly recommend GSFinder+.
Install that and navigate to \windows\start menu\programs\vijay555\vjphonetools
Then, choose the program you want, select the shortcut, choose copy and then choose paste. It will make a copy of that shortcut.
Edit that 2nd shortcut (so that you preserve the original shortcut as an example. Reinstall the cab if you foobar that one up by accident).
Edit the shortcut according to the description on my page, www.vijay555.com.
Just double clicking on any of the original files in \program files\vijay555\ will bring up a message box describing basically how to use each app.
I've got a forum on my webpage. You can post there, pm or email me, or always catch me here if you need help.
V

thanks, i'll give that a go.

cool, seems to be working, how do i change the shortcut icon and add a name on it.
thanks for your help.

What launcher app are you using?
V

hi, sorry i dont really know what a lancher app is, which do you recommend?

vijay555 said:
I highly recommend GSFinder+.
V
Click to expand...
Click to collapse
VJ,
Where can I find GSFinder? I tried google and it keep giving me a site that leads to a Japanese site. I can't read Japanese. Can you please direct me on the right link?
Another question, can I install GSFinder on my SD Card and run it from there?

http://page.freett.com/todamitsu/GSFinderE.htm
GreenSoftware is great! yes, AFAIK you can stick gsfinder anywhere. I recommend a copy in Extended Rom just in case you screw everything and/or lose your SD card (which I've done), and need some way to explore around.
V

Thanks very much Vijay!

VJVolubilis
Dear Vijay,
I'm useing your tool, VJVolubilis and it does not work as I hoped.
When I use VJVolubilis -agon (or -agcon) I hear the sound over my bluetooth headset briefly. It also starts Voice Speed Dialer and as soon as that ends, the sound no longer goes over my headset, but through my phone again. Hope you can help me out.
I have a HTC Universal, Original T-mobile MDA Pro (dutch)
Rom: Imate 1.13.52 WWE, radio: 1.03.01.
Bluetooth Headset: I-Tech Arrow 1
Download VJVolubilis versio 0.21
Thnx in advance ....

sharky48: you need to post this in the VJVolubilis thread.
There is a registry hack in that thread to fix this issue (temporarily). I will make this feature automatic in VJVolubilis quite soon... when I get some time to update it.
V

vijaydevicelock
I recently uploaded your device lock and when i uninstalled it,
a notification error keeps popping up saying, "cannot execute \programfiles\vijay555\vjdevicelock\vjdevicelcok.exe" everytime i
unlock my tilt. ive reinstalled and uninstalled it a couple of times
but still doest work....
can you help me how to take it off please?

i don't understand ...
how can i run it from MY PC command-line ?
i want to send the press-key event from my PC CLI to the Pocket PC....
am i missing something here ?
if so please explain me how to do so....

Athena/Ameo Tray Applet...

Hi all. Need some help please. I had recently used the 'hide' TrayApplet program but after uninstalling Spb Shell, decided that I could do with it being back, but don't want large icons on my Today screen again.
Hkey_Local_Machine\SOFTWARE\HTC\TrayApplet
above I found the links to each of the icons in the tray and can successfully point them to programs of my choice. Great!!
No! The links now work a treat, but the old icons remain the same (therefore hard to distinguish what does what until you tap it).
Does anyone know how to or where the registry entries are for the icons in the TrayApplet? e.g when I tap on the web n walk icon, I now get my configured Internet Explorer, but no associated icon.
Any help appreciated.

No one here hot on Reg-editing? Tried looking at the Universal wiki and their Reg hacks, but it most of it seems to be filed using different naming conventions and some alternative methods.
In any event. The above post shows where the links are (in seperate folders)....which can be permanently deleted and will then remove them from the TrayApplet.

Thanks for the info. I am still trying to decide what to do with the tray on my phone.

Try this cab file.........i'm using it on my Ameo now. It creates a programe in your programe folder with which you can turn on/turn off your tray applet as you wish. Hope it helps
Sorry MACKABY007, never read your firsy post correctly oooops

thank you!
neildunne said:
Try this cab file.........i'm using it on my Ameo now. It creates a programe in your programe folder with which you can turn on/turn off your tray applet as you wish. Hope it helps
Sorry MACKABY007, never read your firsy post correctly oooops
Click to expand...
Click to collapse
SWEET!!! Now I can change my mind as often as I wish!!!! YEA BABY!
Thanks for the post bro.

neildunne said:
Try this cab file.........i'm using it on my Ameo now. It creates a programe in your programe folder with which you can turn on/turn off your tray applet as you wish. Hope it helps
Sorry MACKABY007, never read your firsy post correctly oooops
Click to expand...
Click to collapse
No probs neildunne..at least you tried to help.
And someone else has benefitted from your answer.

Is there a simple regedit to enable/disable the trayapp?

Yep there is
Yes you can do it manually.
Go to HKLM\init and create a strin Launch92 and give it the value TrayAp.exe. When you want to remove it delete the key.
Can somebody post the HTCHomeplug plugin so I can use this one instead of the taskbar?

WA3 will solve it.
I'm happy. God is listening.
System Tray Features
* Added the ability to place program icons on the system tray.
On the screenshot above, you'll see icons that don't normally appear on the system tray. WisBar Advance 3 now allows you to place icons on the tray as a "quick launch" bar, similar to iLauncher and several other software packages.
Get it here:
http://www.lakeridgesoftware.com/forum/showthread.php?t=11258

hide tray
hello!
can I simply remove the tray? can I put the hidetray somewhere when e boots up it removes the tray?
tried on \windows\startup with no sucess..
best regards,
Deiota

WA3 still rocking...
Deiota said:
hello!
can I simply remove the tray? can I put the hidetray somewhere when e boots up it removes the tray?
tried on \windows\startup with no sucess..
best regards,
Deiota
Click to expand...
Click to collapse
Yes you can in Wisbar Advance 3...still in Beta, but well worth a look IMHO.

Please can you help me doing it with WA3????
What do you mean by "but well worth a look IMHO"...
Best regards,
Deiota

Deiota said:
hello!
can I simply remove the tray? can I put the hidetray somewhere when e boots up it removes the tray?
tried on \windows\startup with no sucess..
best regards,
Deiota
Click to expand...
Click to collapse
I too would like to remove this tray bar at the bottom. I dont like it and cannot find how to remove it on my X7500.
I know how to do it on my universal, but the registry is not the same.
Any light on this would be greatly appreciated
Thanks
Adam

Anyone? I am using WAD right now but I do not appreciate how slow it run in comparison to not using it.

neildunne said:
Try this cab file.........i'm using it on my Ameo now. It creates a programe in your programe folder with which you can turn on/turn off your tray applet as you wish. Hope it helps
Sorry MACKABY007, never read your firsy post correctly oooops
Click to expand...
Click to collapse
Thanks from me for this too.
Although I am curious to know... from the community at large perhaps... the Today screen is evidently made up of a series of components... TSk files for the theme... applet files for additional display options... the HTC plug-in software to modify the HTC HomePlugin etc.
It seems a bit odd to me... given the apparent effort put into theme creation software by quite a few writers... that those same coders stopped where they did... at themes.
It seems like only half of the job... even the admittedly-clever HTC Home Plug-in Customiser goes that far and no further.
I'd expect at least one developer to come up with a more comprehensive product... the modules do exist as separate entities... theme designers... plug ins and customisers... and especially with the advent of WM6 and VGA screens...
I've had two Blue Angels now for a couple of years. It never occurred to me to play with themes. The only modfication of the desktop was from whatever software went in and did so as part of the package... XCPU Scalar and some SPB items for example. I never even bothered to upgrade the Windoze from 2003SE. Everything seemed to work alright, and most software that I try to use on it still does too.
Now we have two Ameos as well... both running different versions of WM6... different ROMs... one of which (the later) is T-Mobile.
And, probably due to the larger screen, I decided to take a look into the desktop.
The T-Mobile flavour did indeed come with this Tray App, and it is only today and on here (naturally) that I have actually found out the designation of the thing.
XCPUScalar knew all about it long before I did, and stuck it's Speed, Reset, and Off buttons in it.
The other Ameo came with what I think may be a vanilla (HTC) version of WM6 and the HTC Home Plug-in... and I only recently learned about that here too... none of this appears in the little manuals T-Mobile inlcude with the Ameo of course.
I wonder now, as I write, if a fairly basic and simple method of getting rid of the Tray App may simply be either removing it from the Windows folder or perhaps renaming it.
Either way, your method works well for me... as does XDA-developers per se... and without whom all HTC customers, whether members here or not, would be a great deal poorer.
Personally, I do wish that I understood a good deal more of the subject matter, especially in the deeper-delving posts... but at least with xda-developers being here... all of you... the possibility exists.
Thank You once again... all of you.
QF

Touch Cruise performance enhancements

This post is obsolete

Great tips!

thanks for the tips!

With the O2 version, the registry just reverts back to what it was. Anyone have a cure for this?

This is a really valuable thread. Well done and a big thank you to kwabbernootje for gathering together and posting all this valuable information.
Moderators - how does a thread qualify to be sticky? I'd like to kick off the campaign to make this one sticky. I know there's some overlap with the existing tips & tweaks sticky but I think there is huge value in a thread that is focussed on performance enhancements.
- Julian

Good summary, thanks!

kwabbernootje said:
11. Smooth video playback
For video playback buy Coreplayer 1.1.3 Qtv edition. This (interim) release does NOT fix the driver issue. However they have figured out the Qtv video overlay API’s and are able to take advantage of them. For converting DVD movies quickly take a look at CloneDVD Mobile.
Click to expand...
Click to collapse
You can download the 1.2.0 version now for Qualcomm support

Yzord said:
You can download the 1.2.0 version now for Qualcomm support
Click to expand...
Click to collapse
check
http://forum.xda-developers.com/showthread.php?t=371498
for link
Mod Edit: Dont bother, this user posted a link to WAREZ. This will not be tolerated.

Thanks for these!!!!

Perhaps this should be a sticky? Thanks for the summary kwabbernootje!!

Very good thks

Is there any registry modification to disable the TOUCH funcionality in Polaris ?!
I had a problem with my polaris after use kaisertweak , and now nothing in the screen pressed or clicked like i dont have a touch screen.
Only when i do gesture up the cube comes up .. nothing else..
and for this reason i think if there is such a modification in a registry that changed by mistake ..
is there something ?!?!

CruiseMod, can you be more specific? What did you change or trying to change in the registry? You can always try a hard reset.

CruiseMod said:
Is there any registry modification to disable the TOUCH funcionality in Polaris ?!
I had a problem with my polaris after use kaisertweak , and now nothing in the screen pressed or clicked like i dont have a touch screen.
Only when i do gesture up the cube comes up .. nothing else..
and for this reason i think if there is such a modification in a registry that changed by mistake ..
is there something ?!?!
Click to expand...
Click to collapse
Don't use Kaisertweak on the cruise ! ...or if you do so you have to make an hard reset to get back to full fonctions.

I know this error from CruiseMod :->
You have change with Kaiser tweak the Touch Value!!!
Open with a Text editor the kaisertweak xml file Look about the registry keys for touch and use "Mobile Registry Editor" to edit this value remote from your winxp pc. after softreset your device works again ... value must like over 40000!!!!
If some on want ... i can start to develope a Polaris/Nike-Tweak. I must only edit some value ... not more. realy easy to port!

NetrunnerAT said:
I know this error from CruiseMod :->
You have change with Kaiser tweak the Touch Value!!!
Open with a Text editor the kaisertweak xml file Look about the registry keys for touch and use "Mobile Registry Editor" to edit this value remote from your winxp pc. after softreset your device works again ... value must like over 40000!!!!
If some on want ... i can start to develope a Polaris/Nike-Tweak. I must only edit some value ... not more. realy easy to port!
Click to expand...
Click to collapse
There are sensivity and finger pressure values .. which of both?
Your idea will be great if applied..

If anyone of has this problem like me .. dont hard reset !
JUST GO HERE >
HKLM\Drivers\TouchPanel\PressureThreshold
and change the VALUE to 40000
Soft Reset and you will be fine !!
Thanks to NetrunnerAT

great post. make it a sticky

Great tips ! Thanx
1 question :
kwabbernootje said:
11. Fix slow scrolling large webpages Pocket Internet Explorer
- By default Pocket Internet Explorer is very slow scrolling larger webpages due to rendering problems. This can be fixed by replacing the file called "webview.dll" in the "\Windows" sytemfolder with an older version. The attached CAB file puts the faster webview.dll in the windows folder. A softreset is needed after installation. (you can simply uninstall the patch by using the program manager and restore the webview.dll file to factory default)
Click to expand...
Click to collapse
I can't find this file "webview.dll" (all visible files "on" of course). Where else could be found ? Does the .cab file attached works in my case ?
Thanks for your help !

@Tane71
The webview.dll is in the \Windows directory. Use Resco file explorer e.q. to search this directory. The default file explorer hides certain system files. If you own a Touch Cruise the cab file will work after installation and a soft reset.

[APP] Call Manila Control by built-in Biotouch.exe

This is not a program, but just registry settings to use the built-in biotouch.exe to call Manila Control in order to toggle between M2D and Today.
Notes:
must install Manila Control to \Windows\ before the attached .cab
the cube no longer works after installing this, but the corresponding processes (i.e. QuickDial.exe, MediaHubMini.exe and APLauncher.exe.exe) may still in your memory unless you replace the .exe by dummy programs or kill the processes.
must backup the original [HKEY_LOCAL_MACHINE\Software\HTC\Biotouch\Biotouch] before installing the attached cube, otherwise won't be able to restore the cube.
toggling M2D/Today using softkeys as shown in the demo video is NOT set by the attached .cab
Demo video:
http://hk.youtube.com/watch?v=3fGNWYI2fkA
download:
for Nike, Polaris and Vogue, pls refer to attachments of this post.
for Elf, pls see the one provided by dark.angel at post #13

Good idea, I'll try on HD when I'll have it, I hope monday.
Thank you

great idea. Although I've still yet to find a use for a second today screen. lol

is there going to be a version of this for the vogue? it seems neat but im not ballsy enough to install something not meant for my device quite yet.

lazyboy0172 said:
is there going to be a version of this for the vogue? it seems neat but im not ballsy enough to install something not meant for my device quite yet.
Click to expand...
Click to collapse
Vogue uses different registry settings. please try the newly added cap in post #1. pls be prepared for bug-fixing time because i can't test it on my own. for safe, pls do a backup, especially the [HKEY_LOCAL_MACHINE\Software\HTC\Biotouch\Biotouch] registry key, before installing.
good luck.

davideuck said:
Good idea, I'll try on HD when I'll have it, I hope monday.
Thank you
Click to expand...
Click to collapse
surely none of the 3 uploaded version would fit the vga devices.
if you want a try, i guess the Polaris version can be a good start. pls be prepare for the pull-up screen being in 1/4 size.
pls do let me know the testing result and see whether i can find a way to fix it. if it doesn't work at all, pls kindly let me know the following registry key values on your device:
[HKEY_LOCAL_MACHINE\Software\HTC\Biotouch\Biotouch]
"App1"
"Cube1"
"Path11"
thanks for your interest.

thx!! its very fine!

to pp18 with a simple question..
PP18!!
please let me know before i make some serious mistake with my HTC touch 3G jade..Is it working on it as well?Or your program is connected only to the above mentioned phones?I needed exactly the program tweeks u wrote.It should be fantastic,but I have this conserne..
Please let me know if I can tweek my 3G jade without fear..?!
by the way,thank you for the nice app you wrote..HELIOS

Great find,. thanks for sharing,,.

pp18 said:
This is not a program, but just registry settings to use the built-in biotouch.exe to call Manila Control in order to toggle between M2D and Today.
Notes:
must install Manila Control to \Windows\ before the attached .cab
the cube no longer works after installing this, but the corresponding processes (i.e. QuickDial.exe, MediaHubMini.exe and APLauncher.exe.exe) may still in your memory unless you replace the .exe by dummy programs or kill the processes.
must backup the original [HKEY_LOCAL_MACHINE\Software\HTC\Biotouch\Biotouch] before installing the attached cube, otherwise won't be able to restore the cube.
toggling M2D/Today using softkeys as shown in the demo video is NOT set by the attached .cab
Demo video:
http://hk.youtube.com/watch?v=3fGNWYI2fkA
Click to expand...
Click to collapse
Is it possible to use this on HTC Touch (Elf)?
And also I would like to change running program from ManilaControl to any other, for example CommManager.
I've installed reg settings from the Vogue cab (is it right?), and copied original Biotouch.exe and dummy APLauncher.exe, MediaHubMini.exe and QuickDial.exe to the windows dir, created shortcut for biotouch.exe in the windows/startup folder and Soft-reseted my device.
Now when I make touch gesture the screen appears into black and nothing happens.
Is it possible using registry settings to bind touch gesture to run any exe (for example, commmanager.exe)?
Thank you for answers!

heliosismagic said:
PP18!!
please let me know before i make some serious mistake with my HTC touch 3G jade..Is it working on it as well?Or your program is connected only to the above mentioned phones?I needed exactly the program tweeks u wrote.It should be fantastic,but I have this conserne..
Please let me know if I can tweek my 3G jade without fear..?!
by the way,thank you for the nice app you wrote..HELIOS
Click to expand...
Click to collapse
sorry i really can't answer your question because i haven't played around with a Jade before and I don't have any friends who have bought one. the main prob is, i don't know the version no. of biotouch shipped with Jade.
if you really want a try,
do a full backup (so that you can hard reset + restore in worst case)
backup/export the [HKEY_LOCAL_MACHINE\Software\HTC\Biotouch] registry subtree
try the Polaris version
good luck

dark.angel said:
Is it possible to use this on HTC Touch (Elf)?
And also I would like to change running program from ManilaControl to any other, for example CommManager.
I've installed reg settings from the Vogue cab (is it right?), and copied original Biotouch.exe and dummy APLauncher.exe, MediaHubMini.exe and QuickDial.exe to the windows dir, created shortcut for biotouch.exe in the windows/startup folder and Soft-reseted my device.
Click to expand...
Click to collapse
Elf's built-in biotouch version is different from Vogue's. pls find the Vogue's version, which should appear in those threads about installing 4-sided cube on Elf
Now when I make touch gesture the screen appears into black and nothing happens.
Is it possible using registry settings to bind touch gesture to run any exe (for example, commmanager.exe)?
Thank you for answers!
Click to expand...
Click to collapse
basically yes. the trick is in the "App1" reg key. if the app being called has a visible window and you want to use the swipe-down gesture to hide it (like the original cube), the first part of the key value must be the right class name. otherwise, like the case for Manila Control, simply use a non-exist class name.

I've duplicated my commanager.exe and mui files and renamed them to biotouch.exe and biotouch.exe.mui, so now after the touch gesture commanager is running. It works!
Here is the test cab file, i haven't tested it on a clean device, but it seems to be work. If it doesn't working, post here please.

added a link to the Elf's version by dark.angel to post #1

snoopy
Hey, Love the snoopy. Is there anyway to take it off however? I't just doesnt go well with my today screen?

KH2GR said:
Hey, Love the snoopy. Is there anyway to take it off however? I't just doesnt go well with my today screen?
Click to expand...
Click to collapse
though not totally take if off, but editing the registry keys as below can minimize its appearance:
[HKEY_LOCAL_MACHINE\Software\HTC\Biotouch\Biotouch]
"TotalBMP"=dword:00000001
"Cube1"=hex:07,01,01,01,01,01,01,01,0A,C8,C9,CA,CB ,01,01,01,01,01,01
"UpFPS"=dword:0000FFFF
if you want to further cut down the size of the snoopy image that may appear for a short time, you can also change the below key:
(for Nike and Polaris) "Path1"="mc01.brn"
(for Vogue) "Path1"="\Windows\mc01.brn"

Is it possible to call manilla from any program with this gesture fix?
I mean the way I call and close cube by just scrolling tumb up or down.