There is this program here called Pocket Bluetooth:
http://www.bluetooth.jazztel.es/
Which is not working very well in my 9100, and actually stopped working entirely.
What it promises:
1. One click enabling and disabling bluetooth
2. Shutting down BT after 60secs of inactivity.
3. Setting the screen light permanently on i.e in the case of a GPS set.
...things very much needed.
Does anybody know of another program that does that?
Thanks
No one?
Cicle BT does one click enabling and disabling of BT
http://www.winmobileapps.com/Home.aspx
Its freeware too.
Works for me U can put it in the tray useing PHM traylaunch
Or map it to one of the hardware buttons 8)
meschle said:
Cicle BT does one click enabling and disabling of BT
http://www.winmobileapps.com/Home.aspx
Its freeware too.
Works for me U can put it in the tray useing PHM traylaunch
Or map it to one of the hardware buttons 8)
Click to expand...
Click to collapse
Thanks meschle,
It lacks though 2 main functions for me.
1. Disable BT after 60sec of inactivity and,
2. Screen light toggle, to permanent on, or normal when BT is active.
Regards
I contacted the developer of the Pocket Bluetooth Tools, but got no reply for a week now, nobody knows anything?
No one ?
Related
Does anybody have an idea, why every call I made automaticaly activates Bluetooth?
I do not use any headset.
amir77a said:
Does anybody have an idea, why every call I made automaticaly activates Bluetooth?
I do not use any headset.
Click to expand...
Click to collapse
Have you installed Bluetooth Tools?
Not sure if that's even necessary or not, but certainly that software by very nature, does this so that incoming calls can be passed to Bluetooth headsets.
This can be altered, if you are using Bluetooth Tools, by enabling this item on the today screen, and turning OFF timed bluetooth mode.
If you are not using this, then I am not sure...
Yes, I do use Bluetooth tools.
I use it mainly for my GPS BT Receiver.
I will play with its options, and see if this can solved this.
amir77a said:
Yes, I do use Bluetooth tools.
I use it mainly for my GPS BT Receiver.
I will play with its options, and see if this can solved this.
Click to expand...
Click to collapse
Not solve mate - it's the whole intention of the software you installed.
Simply enable the Bluetooth Tools plugin on your today screen.
Then you will see a little clock icon.
Tap on this so it goes grey.
This means you just turned OFF the timed bluetooth option.
But mate, it ISN'T a bug, and is the very purpose of Bluetooth Tools for most people.
To get it to activate Bluetooth ONLY when a call comes in, so as to enable the headset.
Instead of PERMANENTLY having to leave BT on, and thus flatten the battery.
i'm pretty sure mine does it when i make the clock grey aswell
Rudegar said:
i'm pretty sure mine does it when i make the clock grey aswell
Click to expand...
Click to collapse
Rudegar,
If you grey out the clock, you turn OFF the timed element of Bluetooth.
It will then depend on whether you have Bluetooth ON, or Bluetooth OFF as to what happens then...
All the clock does, AFAIK, is enable or disable timed bluetooth...?
Yep.. guess you right. It's working so good with the BT GPS receiver, I'll just sit and enjoy, and let it work for 60 seconds, each call I make.
Even when I turn the clock grey it still comes on !
OK I can live with the 60secs business, it'll save battery life.
But what is the purpose of the 2 battery indicators 1&2 ?? Can't seem to suss that out ?
ekko star said:
Even when I turn the clock grey it still comes on !
OK I can live with the 60secs business, it'll save battery life.
But what is the purpose of the 2 battery indicators 1&2 ?? Can't seem to suss that out ?
Click to expand...
Click to collapse
They are two different Profiles as it were.
It means you can configure settings as you prefer for one device/gps/headset, and then click icon 2 and set another lot, for a different device, then quickly change easily.
That info is from the Bluetooth Tools site, where it is all mentioned.
I don't wish to sound too rude, but it would be helpful if people seeking support would try reading the site where they download stuff from, or the original author's site, first...
http://bluetooth.i-networx.de/index_e.html
thanks for the help mate and thanks for telling me what it already says on that site.
My question is really how to configure those two settings ? I can't work out how I can set different settings for profile 2 nor how I can change 1 ?
ekko star said:
My question is really how to configure those two settings ? I can't work out how I can set different settings for profile 2 nor how I can change 1 ?
Click to expand...
Click to collapse
Well, it's dead simple (actually, was too simple for me to understand until someone pointed it out to me...): you tap on '1', so that it gets the little grey box around it. Then you use the normal settings dialogs of the PPC to configure things like backlight timeout, brightness etc. Then go back to the Today screen, tap on '2', and again configure your PPC. Now, each time you tap '1' or '2', the set of settings will be restored. Unfortunately, I couldn't find a list of which settings are actually subject to that toggle. I know that the backlight timing is, because that's what I use it for: while TomTom is running, I don't want the backlight to go out, so while '2' was actibe, I configured the backlight accordingly. Now '1' is my normal mode, and '2' is the "navigation" mode.
Cheers
Daniel
I currently use a QTEK s110 mainly for sat nav purposes. i dont use it as a phone at all. i am using tom tom5 with a globalsat bt-338 bluetooth reciever. with the bluetooth running it runs the pda battery down in about 2-3 hours if i forgot to lift the car charger from the other car. also it is a pin to start up as i have switch flight mode off and then wait fo rth phone to boot up before activating the tt software. so here are my questions.
is there anyway i can just get the tom tom to switch the flight mode off when i activate the tom tom software?
or is there anyway i can switch the pda off when not in flightmode rather than put it in standby as this just wastes the battery?
Can a shortcut button be created for the flight mode facility?
is there a fix for running the bluetooth with the flight mode on?
at present i have to switch off flight mode which becomes a pain when i have to switch it back on.
i have looked in to using the Globalsat sd-502 but it has compatibility issues.
i appreciate any help on this
Teb
"is there a fix for running the bluetooth with the flight mode on? "
tebs,
I know how you feel. This seems to be a problem with certain firmwares of the Qtec S110.
My manual states that holding down the power button turns the phone part off but not on my phone.
I'm currently testing Phone Alarm. It allows you to set up profiles. I've set one up which switches the radio (i.e. phone) off and bluetooth on. With it you don't have to go anywhere near flight mode. In fact, if you do, it'll get a bit confused. It's two presses on the today page to change modes. You can configure it to automatically put your phone pin in when switching the phone on. It's one press to toggle bluetooth on or off.
It takes some configuring but may do the job and its quite cheap (30 day trial)
Hi Borg,
i have also been using phone alarm for the last 3 weeks or so and its workin quite well. look as if i`ll have to purchase the software as my 30 day trial period is about to expire.
Yes, it's a pain that we have to buy software just to do what should be standard i.e. have bluetooth on without the phone on, but there you go. I contacted Qtek about this and they were pretty useless. Eventually I convinced them that it wasn't a faulty device but a faulty firmware and the only firmware that they offered me was the one I already had which is when I turned to PhoneAlarm.
Maybe one day HTC will put two physical switches on their devices to turn off phone and bluetooth - much better than software flight mode.
On a related note: I use sat nav whilst walking. I would like my bluetooth to actually turn off when I turn the device off so as to save PDA battery power. I'm sure the manual says it does turn off when you turn off the device but again it doesn't with my firmware - does yours?
borgs said:
Maybe one day HTC will put two physical switches on their devices to turn off phone and bluetooth - much better than software flight mode.
Click to expand...
Click to collapse
I've been saying that for ages! But honestly I dont even need physical buttons. If they would at least make the communications module togging (ie flight mode plus other radio functions) accessible from an on screen area bigger than a pinhead, that would be enough for a start. Its impossible to do it one handed. I'd love to know who the bonehead is at MS product development that okayed such awful ergonomics on a critical funciton...
Borg, my one is the same i cannot switch it off with the bluetooth running. need to switch it off first before switching the pda off otherwise the screen goes blank for a second then comes back up again!
skagen i totally agree with your comments.
its a pity the globalsat sd-502 doesnt work with it either that way you`d save loads of power not using the bluetooth at all. unfortunately once again the qtek has let us done on that one too as it doesnt detect the memory card!
Try
1. radiooff.exe
2. Turn on Blutooth
3. Tomtom -> GPS -> Configure -> Other NMEA GPS (4800,COM5 )
tebs said:
is there a fix for running the bluetooth with the flight mode on?
Click to expand...
Click to collapse
Try this:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\FlightMode]
"IsFMCheckEnable"=dword:00000000
"WarningMsg"="Please turn Flight Mode off first"
Change "IsFMCheckEnable"=dword:00000001 to "IsFMCheckEnable"=dword:00000000
Works for me...
Bye
it doesnt exist on my registry
Re:
Krisu said:
Try
1. radiooff.exe
2. Turn on Blutooth
3. Tomtom -> GPS -> Configure -> Other NMEA GPS (4800,COM5 )
Click to expand...
Click to collapse
radiooff.exe sounds interesting but I couldn't find it on my pocketPC. I looked in the windows directory and then I did a find. Is it a third party product?
Please ignore, I wasn't logged in when I read that message and so it didn't show me the download. Thanks
moghisi101 said:
tebs said:
is there a fix for running the bluetooth with the flight mode on?
Click to expand...
Click to collapse
Try this:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\FlightMode]
"IsFMCheckEnable"=dword:00000000
"WarningMsg"="Please turn Flight Mode off first"
Change "IsFMCheckEnable"=dword:00000001 to "IsFMCheckEnable"=dword:00000000
Works for me...
Bye
Click to expand...
Click to collapse
This also doesn't exist in my registry but the warningmsg part exists under OEM rather than HTC. But, if I add IsFMCheckEnable 0 it has no effect.
I think that this is probably a difference between the Qtek firmwares and the iMate firmwares. Qtek seem to have stuffed up in their current firmware.
Re:
Krisu said:
Try
1. radiooff.exe
2. Turn on Blutooth
3. Tomtom -> GPS -> Configure -> Other NMEA GPS (4800,COM5 )
Click to expand...
Click to collapse
Fantastic - thank you so much Krisu!
I have now uninstalled PhoneAlarm, done a soft reset and can now toggle the phone off and on using that app. If the bluetooth is currently running it leaves it running. No need to go near the flight mode button and should be able to assign it to one of the keys for fast turning off of the phone.
Thanks again!
borgs said:
moghisi101 said:
tebs said:
is there a fix for running the bluetooth with the flight mode on?
Click to expand...
Click to collapse
Try this:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\FlightMode]
"IsFMCheckEnable"=dword:00000000
"WarningMsg"="Please turn Flight Mode off first"
Change "IsFMCheckEnable"=dword:00000001 to "IsFMCheckEnable"=dword:00000000
Works for me...
Bye
Click to expand...
Click to collapse
This also doesn't exist in my registry but the warningmsg part exists under OEM rather than HTC. But, if I add IsFMCheckEnable 0 it has no effect.
I think that this is probably a difference between the Qtek firmwares and the iMate firmwares. Qtek seem to have stuffed up in their current firmware.
Click to expand...
Click to collapse
LOL, yea I forgot to mention that my Qtek is running on an Imate ROM. That may be why...
moghisii101: No probs mate, I appreciate the info - if anything its shown me that the iMate rom flight mode is better implemented than the Qtek version.
tebs: check this thread out: http://forum.xda-developers.com/viewtopic.php?t=39281
You will find a bluetooth cycle program there (CicleBT). It seems to work ok with radiooff.exe but can get a bit confused if you download (from there) and use FlightMode. So I would suggest that you use radiooff.exe and CicleBT. I've assigned them to buttons. Phone Profiler also seems to have problems with our dodgy firmware. Again this is not the program's fault but what Qtek have done with their firmare.
And cheers for your thread as you've helped me solve my problems!
Check out SKScheMa at www.s-k-tools.com as it can turn WiFi BT and GSM on and off from a scripting language or from its scheduler.
Cheers cjb
I use the bluesoleil BT stack,and I can use tomtom with the phone off!
The first puts a bluetooth icon in the bottom tray - a simple and quick fix
the bt trayicon comes from the universal hacks. It does send a warning but if you soft reset works well in the Wizard.
The second is part of the dktoday plugin (thanks to darek kot for this - see threads in other part of forum) It also lets you enable automatic bluetooth activation so that bluetooth comes on and off when you receive calls. And it has a call counter to keep an eye on total minutes used and on some networks counts sms sent. Also displays cell/mobile operator name.
Hope this helps someone
The dktoday plugin is superb! thanx
birdibird said:
The dktoday plugin is superb! thanx
Click to expand...
Click to collapse
All thanks goes to darek who was very patient when compiling this.
I found the best setup is with lines 1&3 enabled and bt headset off. this seems not to drain the batery and I found the missed message bit irritating after a while.
Thanks for the BT tray icon! I was looking for something like that. The installer threw an "Incompatible Device" warning but everything seems to work nicely.
Yes the bt trayicon comes from the universal hacks. It does send a warning but if you soft reset works well in the wizard. Sorry should have mentioned that in first posst
OMG ... I like the DKtoday "program"!!!!
I turned off the displaying of the lines (1st, 2nd, 3rd) so nothing appears on my today screen (already full), BUT ... the bluetooth function (on when a call is received, of when a call is disconnected) works like a champ!!!!!!
Thank you!
Interference with GPS?
Hi guys
Do you know if this program will interfears with the GPS navigation?
I have a bluetooth GPS reciever so just wondering how this software will work?
Will it only recognise BT headset or any BT device?
Thank you
DKToday works fine with tomtom, it will get a signal from tomtom to turn on the BT stack, thus enabling your BT GPS.
Used DKToday since 1.60 up the phone ranks, best plugin for bt/signal/cost control you could ask for.
Hi,
One of the most useful features of TomTom is the auto enable BT when TT starts and then turn it off when TT is turned off.
I also use Route66 because it has better maps but i have to remember to turn BT on before starting the program.. Boring..
So, is it possible to automatically turn ON BT when starting an application and turn it OFF when the app goes off?
SPB Phone Suite turns BT ON and OFF according to profiles and not apps.. almost perfect..
Thanks.
I use PhoneAlarm, which is similar.
I have used some spare profiles to set up a TomTom profile (also a GPS tracking profile): with the TomTom one, it changes screen orientation, BT status, runs TomTom, goes handsfree.
Do you have spare profiles in PhoneSuite to do the same?
yep, phonealarm seems to be the answer but i want something more simple...
i can set the "cradle" profile in phonesuite to turn on BT..
i thought i could add to the app shortcut some kind of command to turn BT on..
but thanks for the tip.
Hi all. I have seen many bluetooth toggle solutions and many of them work great. But I am looking for a simple solution to turn BT on, not to toggle it. This is why. I use profiles in Inesoft Phone a lot. But their BT on and off do not work due to the TP2 not using the WM stack. So say I am switching from one profile where BT is on to another where BT should stay on. Toggle does me no good because it will sometimes turn BT off when I really wanted it to stay on. There is a native app on my Tilt 2 in \Windows called TurnBTOff.exe. But there is not one to turn it on. I must have 5 different BT toggles on my phone but nothing to turn on only.
Any ideas for a TurnBTOn app? I am hoping for the typical small footprint cab utility and not another install of an app that does 20 other things besides BT on. I have found some 'on only' cabs, but not for the widcomm stack we have.
try this out. i am downloading it right now myself. it looks like it creates an actual exe shortcut that you can assign to your softkeys or certain hardware buttons to turn BT on and off. i know you mentioned you only need it to turn ON but having both might be good too...
Thanks for the info. But it looks like all of those are toggles, not an "on-only" BT exe. So I don't think it will solve my issue posted above.
Great fix for CHT 1.8 Bluetooth Issue
Thanks for the link! Installed that simple program, and now the Bluetooth toggle switch on my Cookie Home Tab works great on my TP2/Tilt2.