Related
Is there a keylock app available allowing me to lock all keys while device is on? Is it possible to get the keylocker function from Windows Mobile 5??
helterskelter said:
Is there a keylock app available allowing me to lock all keys while device is on? Is it possible to get the keylocker function from Windows Mobile 5??
Click to expand...
Click to collapse
If you go to Start -> Settings -> System -> Button Lock, you can set it to lock all the buttons except from the power button. That way, when you turn off the screen (leaving the phone on), all the buttons are disabled except the power button.
Be warned though that if you receive a call or a text message, the buttons and screen become active again.
Try this it may be what you are looking for.http://www.pocketpcfreewares.com/en/index.php?soft=1365
So if you can't take the call it turns on your magician and leaves it turned on
futurity said:
So if you can't take the call it turns on your magician and leaves it turned on
Click to expand...
Click to collapse
You'll probably have a time-out set on the Magician anyway to power it down after three minutes or so? If you do that then the keylock will come on at the same time, but yes, for that three minutes the phone's keys and touchscreen will be active if you receive a text/call.
I use mort saver
http://www.pocketgear.com/software_detail.asp?id=14321
I haven't tried DeltaLock which is given with the previous link. I have been using Screenlock for almost a year now on my Jam. It has worked fine and done exactly what it is supposed to do. I use it mainly when I'm playing music and have my phone in my pocket. It saves the battery by shutting off the screen completely and locks all of the keys except the 2 key combo required to activate the screen again. http://www.pocketpcfreewares.com/en/index.php?soft=1300
Matterhorn, just tried Screenlock, it is great for MP3 listening. Thanks.
Hi all, if you try the following...
1. Click 'Device unlocked' on the Today screen so it changes to 'Device locked'
2. Turn device off / wait for it to go to sleep
3. Turn device on / wait for something to wake it up
...the device has unlocked itself, correct or is it just my Xda Mini S?
So how are we supposed to lock the device properly from accidentaly screen taps -- a problem I keep encountering?
Also, is there any way to add a timeout to the device lock, so if the screen isn't tapped for 5 mins, it automatically locks (assuming we actually make the lock feature work in the first place!).
My K-JAM used to do this all the time.
I never actually worked out the exact cause, i have a feeling it may have been caused by software i was testing when i 1st recieved the k-jam.
It stopped doing it altogether after a recent hard reset.
Sorry i wasnt more help.
Cheers
Chris
the device lock wasn't made with these systems in mind... it's intended for smartphone devices which don't have a 'suspend' state - let alone a button you can push to put it into, and bring it out of, that state.
If you want a free, proper locker, put the following in your today-screen-app-launcher of choice:
http://www.pocketgear.com/software_detail.asp?id=14621
This'll 'lock' even the on/off button (immediately 'locks' again if you try to turn it back on, or shut it off (by holding down the on/off button - as you need to confirm by dialog)).
On the down side, it'll also turn your display off.
To unlock, on the Wizard, you need to press the Messaging (top-left, front side) button and the Voice Dial/Memo (top-right, side) button at the same time.
That lock/unlock feature on the Today screen is pretty crappy actually. I locked my keys religiously. And half the time, I would pull my phone out and it was on a webpage or on my email... and I never opened them.
I'm hoping they fix this...
-Mc
Well it's ridiculous that O2 etc. keep the function enabled by default on the Today screen of their units, if the feature is for Smartphones only! But then, there's a lot of things O2 don't understand about the world but don't get me started on that.
Warning! Do not use Screenlock!
Warning: I think this program just killed my Wizard. Don't install unless you know the risks.
http://forum.xda-developers.com/viewtopic.php?p=212261#212261
People, please don't recommend software on here that is not tried and tested on WM5.0.
On my Qtek 9100 it works. The only button that doesn't lock is the power button. Accidental tap of the power button will turn the screen on. You cannot even press and hold to power off when locked. When phone comes back on it stays locked.
I have been using this application for a while now - but I think the warning for installing sofware goes for all software. Who is to say that SPB doesn't install something that 'phones home'? Or that Mort Script doesn't cause irreperable harm to the registry stack when using its registry functions?
I've had no problems with it, but I guess I'll continue in your other thread.
I also can't just quickly tap the on/off button. Sure, it goes on - but it then immediately goes off again as well.
Thanks. What happens if the device crashes or you soft reset whilst the screen is locked? Does it reboot unlocked with the screen on? I wondered if mine had somehow locked completely, so the screen is off when it reboots ...but that wouldn't explain no LEDs working either :?
I don't know about crashes but, with some reluctance - admittedly, I tried the soft-reset (pin button at the right) while the screen [w]as locked...
...the device switched off, switched back on, booted up, and displayed my Personal Info screen.
So... no problem there, sorry :/
Well I have my replacement Mini S now. Any other programs than ScreenLock that do this? I'm sure I found once, but I can't find it any more :?
I couldnt get screenlock to work on the ppc6700, but mortsaver worked just fine, you might want to try that.
I'm perhaps misreading this, but the device locking seems to work ok for me on my XDA Mini S. Once I've locked the Mini S the only way I can use it again is to unlock it - if I touch the power button or let it go standby itself, when I touch the power button to wake it up, it remains locked. Also, if I hold down the power button for five seconds or more the Mini S will not give me the option to switch off entirely.
John
Hi John,
Do you have a Device Password setup? ( Start > Settings > Personal > Password > [x] Prompt if device unused for... )
I find that when
1. Device Password is enabled
2. you lock the device
3. you press the device on/off button (goes to standby)
4. you press the device on/off button again (goes back on), the device is unlocked.
When Device Password is disabled, and you then follow steps 2-4, the device remains locked
In my experience this is true [it sort of makes some sense you can't type in your password with the device/screen locked].
it would make sense if...
A. the password dialog would actually pop up (note that if you turn the device off/on manually, before the password prompt timeout, the password dialog does not show up)
and
B. they would first show the unlock screen and -then- the password prompt
The password prompt facility effectively overriding the unlock screen is just bad software design.
well put zeboxx... i wanted to say something in those lines but couldn't articulate them properly [ended up with a it sort of makes some sense jibe...]
ZeBoxx said:
Hi John,
Do you have a Device Password setup? ( Start > Settings > Personal > Password > [x] Prompt if device unused for... )
I find that when
1. Device Password is enabled
2. you lock the device
3. you press the device on/off button (goes to standby)
4. you press the device on/off button again (goes back on), the device is unlocked.
When Device Password is disabled, and you then follow steps 2-4, the device remains locked
Click to expand...
Click to collapse
Nope, I don't have a device password enabled which explains it.
John
read the title, is there a way to do this? A small program perphaps that registers when I hit the power button to have it to go to standby automatically uses the lock function? :shock:
Re: automatically "lock" the phone when I go into
DeniaL said:
read the title, is there a way to do this? A small program perphaps that registers when I hit the power button to have it to go to standby automatically uses the lock function? :shock:
Click to expand...
Click to collapse
The keys lock anyway when the device is in standby mode - IIRC there's an option to set it so that when in standby the only key that can be pressed is the power button.
Re: automatically "lock" the phone when I go into
Tezcatlipoca said:
DeniaL said:
read the title, is there a way to do this? A small program perphaps that registers when I hit the power button to have it to go to standby automatically uses the lock function? :shock:
Click to expand...
Click to collapse
The keys lock anyway when the device is in standby mode - IIRC there's an option to set it so that when in standby the only key that can be pressed is the power button.
Click to expand...
Click to collapse
true, but when it comes out of standy, I.E. someone calls me, the softkeys are active. Then half the time I pull the phone out of its case, it hits the ignore softkey and sends my caller to voicemail. The only way i've found to resolve this without buyin a new case is the use the lock feature on the phone.
I use VJDeviceLock on my Mio, which doesn't have a power off button. So I use it to lock the device and switch it off, ie make a better power off button.
However, Matt's "yet another device lock app" is better then mine. Try it out.
V
vijay555 said:
I use VJDeviceLock on my Mio, which doesn't have a power off button. So I use it to lock the device and switch it off, ie make a better power off button.
However, Matt's "yet another device lock app" is better then mine. Try it out.
V
Click to expand...
Click to collapse
where can i find these apps?
http://www.vijay555.com/?Releases:VJDeviceLock
VJDeviceLock:
http://forum.xda-developers.com/viewtopic.php?t=45851&highlight=vjdevicelock
Yet Another Device Lock:
http://forum.xda-developers.com/viewtopic.php?t=45953&start=0&postdays=0&postorder=asc&highlight=
V
Hi all,
I have decided to uninstall S2U2 and I don't want any other locking applications. However, is there is a way I can have the standard device lock activated with a short press of the power button?
Currently I am having to hold the 'End call' button until it locks, then turn the screen off with the power button.
Thanks
I have a pin setup and use the short press of the power button to put the phone into powersave 0 whixh then outs the phone into pin lock after a short while
If you push the hang off button for more than 10seconds, it will be locked
No...
FetchBLN said:
If you push the hang off button for more than 10seconds, it will be locked
Click to expand...
Click to collapse
I don't know about your device...
On my HD you can press the end button and count until 3, and the device is locked
I can't remember whether it's in HD Tweak or Advanced Config, but there's an option to automatically lock the keypad on screen turning off (both timed out or power button press I assume, but not tested) so you could try that?
Edit: instead of being lazy I actually looked it up - it's in HD Tweak, option 4.1; Lock -> AutoLock
Just tried it and it works, turn backlight off by short power press and it's locked a well as screen turning off!
Good tip: works for me!
By the way: you can configure what happens when you pres the "disconnect" button too.
Guys
Thanks for this thread. I am very confused when it comes to locking the phone. Can anyone tell me...
Does the built in device lock work well? Will it keep the phone locked when a call comes in ?
If so, then why do people use S2U2 or other third party apps? Also some people say that S2U2 drains the battery. Is this true? How does it drain the battery?
The HD tweak had the disadvantage that when the screen turns in 'shaded' state the device is also locked.
Then when unlocking the device the screen stays 'shaded'.
avimak said:
I don't know about your device...
On my HD you can press the end button and count until 3, and the device is locked
Click to expand...
Click to collapse
Maybe it takes you 10 seconds to count to 3.
I've finally got there with locking my HD... I had a S710 before the HD, and I liked the fact that on that I could hold down the "end call" button, and that it would lock the phone and turn the backlight off. The screen would then turn off completely after whatever time I had entered (2 mins I think). And on unlocking the device the backlight would turn on.
On my HD I have now disabled the device password, but enabled my PIN request, so that it secures the phone if it has been turned off completely. This means that I can now hold down the "end call" button for 3 seconds or so and it locks the device (requiring a 2-tap process to unlock, like the S710). I have also used the standard windows mobile settings (power) to have the backlight automatically turnoff after 30 seconds, and have used HD Tweak (setting 4.1) to autolock the device when the backlight turnsoff. The only problem is that when AutoLock happens using HDTweak, when I unlock it the backlight fails to turn back on, even once I have started using the screen. Any ideas on how to fix this?
Dave
chaosdefinesorder said:
I can't remember whether it's in HD Tweak or Advanced Config, but there's an option to automatically lock the keypad on screen turning off (both timed out or power button press I assume, but not tested) so you could try that?
Edit: instead of being lazy I actually looked it up - it's in HD Tweak, option 4.1; Lock -> AutoLock
Just tried it and it works, turn backlight off by short power press and it's locked a well as screen turning off!
Click to expand...
Click to collapse
Just to confirm my above question regarding this specific feature of HD Tweak... I have got this working on my HD now too, but when it autolocks, and I unlock it, the backlight doesn't turn back on, and the only way to make it turn back on is to hardbutton off and on the device (not power-off, just press the button the top of the phone and press it again).
This is stopping me from using the HD Tweak autolock now, which is annoying because it does precisely what I need! Can anyone offer any advice?
I've just realised that it actually says within HD Tweak itself (on 4.1 option selector) that this is a known issue... any idea on if and when it will get fixed?
How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!
james00000007 said:
I have a pin setup and use the short press of the power button to put the phone into powersave 0 whixh then outs the phone into pin lock after a short while
Click to expand...
Click to collapse
Hi,
Is this similar to an application my friend had on his iphone. Basically, when he needs to use the phone, he needs to put in a pin to unlock. I think the Nokia E61 has a similar feature.
nikki-m said:
How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!
Click to expand...
Click to collapse
Can u let us know how to u set it?
nikki-m said:
How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!
Click to expand...
Click to collapse
i hav a qns, at the locked screen, when u rotate ur device, does the screen rotate as well???
i had tis problem whn using gyrator to lock, whn its lock at home screen, the screen wil rotate if i rotate my device. how to disable that???
davehodgkinson said:
Just to confirm my above question regarding this specific feature of HD Tweak... I have got this working on my HD now too, but when it autolocks, and I unlock it, the backlight doesn't turn back on, and the only way to make it turn back on is to hardbutton off and on the device (not power-off, just press the button the top of the phone and press it again).
This is stopping me from using the HD Tweak autolock now, which is annoying because it does precisely what I need! Can anyone offer any advice?
I've just realised that it actually says within HD Tweak itself (on 4.1 option selector) that this is a known issue... any idea on if and when it will get fixed?
Click to expand...
Click to collapse
Mhh, I also think it's very annoying. I first used the auto lock feature by setting
HKey_CURRENT_USER/ControlPanel/BackLight/AutoDeviceLockEnable = 1, but I also have the backlight-issue, which is really annoying.
I also installed S2U2, but after installing that program the battery-life was inacceptable. By now I'm using the manual method, pressing hang-up for 3 seconds. It works, but I often forget it, and it then happens easily that I press the hard-button which awakes the phone from standby and I make pocket-calls.
The auto-lock feature is also exactly the thing I need, except the fact that I get the backlight issue then. Does anybody know how to fix the backlight issue? Maybe by editing another key in the registry?
Regards,
Tobi
As I said in the hint topic, in order to lock my device I just press the power off button (this activate the stand by), simple and fast
I use S2U2 at first, but it drains power too much, so I uninstall it after 2 days.
Then I use your method - hold the end call button to lock the device.
Now, I change the right softkey to invoke a small application that will turn off the machine (just like press power button). When I take out the stylus, the machine will on again.
Thus, I don't need to press any button, and I feel it is better......personally.......
stm2008 said:
I use S2U2 at first, but it drains power too much, so I uninstall it after 2 days.
Then I use your method - hold the end call button to lock the device.
Now, I change the right softkey to invoke a small application that will turn off the machine (just like press power button). When I take out the stylus, the machine will on again.
Thus, I don't need to press any button, and I feel it is better......personally.......
Click to expand...
Click to collapse
which application are you using now to turn off the screen? sounds interesting.
Tyrion84 said:
As I said in the hint topic, in order to lock my device I just press the power off button (this activate the stand by), simple and fast
Click to expand...
Click to collapse
Yes, but when I activate standby and put the phone into my pocket, I often accidently hit the button again, which reactivates the phone. hit_one_button_to_unlock ist not tobi-proof
would there be an application that will turn on the device when it's OFF. Reason behind this is that my power button wasn't working anymore so I need an app to turn on my phone. Apparently, my alternate route is using AE button plus for turning off, and to turn on my phone is that I have to take out the stylus, but I noticed that it used to consume battery usage...if I take it out on the second time it will eat up 2% of the battery usage...and I had even tried using the switch display off/on with the AE button plus but it will make my usage with my phone for upto 8 complete hours only....before I can even use my phone upto 12-14 hours...
if not an application, maybe remapping or registry hack will help..
please I need some help..
thanks in advance
anyone who could share or help.....thanks
What type is ur pda? Do u mean turn on from COMPLETELY turn off?
Go to Start,Settings,System,Key Lock and set it to "Do not lock buttons".
This way, any button press on any button will wake the device. You might want to lock it before switching off so you don't dial people by mistake.
iam using HTC diamond and currently have the SUN 6.1 with 2.5 manila version, but it seems that the keylock doesn't work properly on that ROM
thanks for all your help, just asking some other options here