Related
Hi all,
I've had my S100 for a week now. It came with ROM ver 1.06 (I think) and right on the 1st day I upgraded to 1.11 and finally decided to apply Anansky's Big Storage ROM. All work perfectly even with my Jabra BT800. I've been trying many different 3rd party software. As usual, after installing and deinstalling, my unit became unstable and therefore would like to start from scratch.
In XDA's ftp site there is a Qtek 1.11 Ext ROM zip file. At first I installed all, but I think I could do away with some. Based on the filenames, some are self explanatory but I don't know which ones I can do without. Could someone be kind enough to explain?
Delete_vdisk_shortcut_WWE.sa.CAB What does this do?
Caller_ID_Magician_Generic_WWE_RC13.CAB Selft explanatory
SmartDialing_Magician_Generic_WWE_RC13.CAB I've read in other threads that some don't install this when using sw like MSVoice Commands.
PhonePad_Magician_Generic_WWE_RC12.CAB I think this contains T9 and what else? How can I edit this file to remove unwanted languages other stuff?
CAB-ArcsoftMMS-20022-Magician-Generic-ENU-08Mar05.cab I believe this is essential, right?
CV2.41.386_WWE.CAB No clue. Is it essential?
JMM101257_WWE_1004.CAB No clue. Is it essential?
BTHUSB_PATCH_AKU26.CAB Self explanatory
Version_WWE_111129.sa.CAB What is it for? Is it essential?
And does anyone know of how to delete these .cabs? I hit soft reset before it autoloaded all of those above mentioned .cabs. IS it possible to delete them or at least make them non accessible?
johnannie said:
And does anyone know of how to delete these .cabs? I hit soft reset before it autoloaded all of those above mentioned .cabs. IS it possible to delete them or at least make them non accessible?
Click to expand...
Click to collapse
If you have the Anansky ROM installed I don't think you will have the option to install the extended ROM when you do a hard reset, mine doesn't. You have to install the extended ROM seperately. You should have made a backup of your extended ROM before doing the Anansky hack. If you don't have it, maybe you can download it from the XDA ftp site. Remember only install .cab files, don't execute the autorun or you may wipe out your big storage. Even if you install all of the Ext. ROM files, they don't take up much space in the storage area (maybe 1.5 or 2 meg.) depending on your Ext. ROM.
Thanks for the responses but I would like some information from you experts on the following:
1. Which CAB files can I do away with and why?
2. How can I edit the PhonePad.CAB in order to remove unwanted languages? Any special software needed?
The Qtek 1.11 ExtROM found in this forum's FTP site has 9 CAB files. Some of them like the Caller ID is self explanatory, meaning this must definitely be installed if Caller ID is one of the functions one needs.
Hi,
Can someone point me to a simple Extended ROM Unlock tutorial because I just can't manage to find my way through the Forum.
I'de like to place my favorite apps in ROM...
Thanx
The General
GeneralPatton said:
Hi,
Can someone point me to a simple Extended ROM Unlock tutorial because I just can't manage to find my way through the Forum.
I'de like to place my favorite apps in ROM...
Thanx
The General
Click to expand...
Click to collapse
well general, depends on the OS you are using..
if you have rom version 1.6.x.x it won't work easy yet.
the pre 1.6.x.x roms are quite simple, download totalcommander for ppc, install it, run it, in the adress-bar type "\extended_rom\" without the " " 's, and voila, there they are..
good luck..
ps.
the search button on top of this page would give the oppertunity to search for words as extended rom in de wizard forums.. :wink:
Ok
Thanx works fine with TC
Just a last question, all cabs i place in extended_rom will install automatically after hard reset ?
'cause I saw i had a autorun.exe file in there and some sutomization cabs that install after Hardreset ???
Thanks
The General
Re: Ok
GeneralPatton said:
Thanx works fine with TC
Just a last question, all cabs i place in extended_rom will install automatically after hard reset ?
'cause I saw i had a autorun.exe file in there and some sutomization cabs that install after Hardreset ???
Thanks
The General
Click to expand...
Click to collapse
There's a config file in there too (can't remember it's name off hand, but it's fairly obvious). This has a list of the cab files to install after a hard reset. I guess you'd need to add your cab files to that list as well as copying them to extended ROM.
Dox
Re: Ok
GeneralPatton said:
Thanx works fine with TC
Just a last question, all cabs i place in extended_rom will install automatically after hard reset ?
'cause I saw i had a autorun.exe file in there and some sutomization cabs that install after Hardreset ???
Thanks
The General
Click to expand...
Click to collapse
depends, some have a config.txt file, if you open this one and edit it to your
needs, the files you put into it will be installed after hard reset, if you
set the right parameters from the txt file.
other roms have the autorun.exe wich installs all the files in the extrom.
i'm not sure anymore if this is right, but i believe that if you rename your
cab's like this:
applicationX.cab -> Default_applicationX.cab
it will install without any problems.
if you have problems with unsigned cabs, you can use the signed.patch
wich can be found on the ftp.
On my Cingular 8125 the extended ROM is write protected, does anyone know how do I remove the write-protection?
jsnipper said:
On my Cingular 8125 the extended ROM is write protected, does anyone know how do I remove the write-protection?
Click to expand...
Click to collapse
Only way around is to flash an older rom into your handset..
Re: Ok
nmx77 said:
GeneralPatton said:
Thanx works fine with TC
Just a last question, all cabs i place in extended_rom will install automatically after hard reset ?
'cause I saw i had a autorun.exe file in there and some sutomization cabs that install after Hardreset ???
Thanks
The General
Click to expand...
Click to collapse
depends, some have a config.txt file, if you open this one and edit it to your
needs, the files you put into it will be installed after hard reset, if you
set the right parameters from the txt file.
other roms have the autorun.exe wich installs all the files in the extrom.
i'm not sure anymore if this is right, but i believe that if you rename your
cab's like this:
applicationX.cab -> Default_applicationX.cab
it will install without any problems.
if you have problems with unsigned cabs, you can use the signed.patch
wich can be found on the ftp.
Click to expand...
Click to collapse
Hi
Could tell us where on the ftp we can found signed.patch?
Bye
Herc. 8)
Here it is
i couldn't find it on the ftp anymore as well..
i'll put it there again, but here it is for you
if it's that easy to get into extended rom, then why do people release the unlockers for extrom? i don't get it.
Ray_jai said:
if it's that easy to get into extended rom, then why do people release the unlockers for extrom? i don't get it.
Click to expand...
Click to collapse
you can access the files on the extended rom, but you can't edit any of the information there. you have to flash a new extended rom image for any changes to take effect. I think those that are looking at the extended rom unlockers is for a different purpose. I think I read somewhere that it let some people use the extended rom space as extra storage (~10 megs), but it messed up applications on the phone, especially the camera.
in general, it doesn't seem to be a good idea to unlock the extended rom. most rom builders look like they are trying to learn how to edit this properly to add it o their rom kitchens.
can one's extended rom go curropt?
after i heard about this, i went into extended rom just to see if it works.
and it did. i exited total commander and started to gather my anti theif program to get installed.
now I go back into extended rom, and everything became gibberish!
and when i click on something it says "error 3 Changing to dir!"
WTF is going on!
can someone help me out?
I just discoverd that I cannot modify the extended rom (using Total Commander, etc.) How does one unlock it so tht it may be modified?
Thanks,
Frank
fmcgirt said:
I just discoverd that I cannot modify the extended rom (using Total Commander, etc.) How does one unlock it so tht it may be modified?
Thanks,
Frank
Click to expand...
Click to collapse
It can, just try again anad again, i did it on my 4th attemps
Cheers!
Thanks for the response but I haven't had any success after several tries. I tried installing the Wizard unlock cab file and afterwards with Total Commander, I can reset the Read Only bit on all the files and copy the files to my SD card. However, I am unable to delete any files. They appear to be deleted but come back after a soft reset. I would like to especially get rid of all the operator settings files. The rest of the stuff like Skype, Anti Virus and Backgammon I can get rid of using Settings>Remove Programs.
Frank
Isn't "ROM" short for "read only memory"?
hi, I am using Buzz's unlocker for Wizard... it made the ExtROM visible but still it is read only
I need to find how can I delete and add files to it.
Any challenging minds out there?
Total commander does not work with the jamin in my case anyway.
Tried several time with no results.
shahzadkhan15nov said:
hi, I am using Buzz's unlocker for Wizard... it made the ExtROM visible but still it is read only
I need to find how can I delete and add files to it.
Any challenging minds out there?
Click to expand...
Click to collapse
hi,
unlocker for wizard is not mine...
buzz
...well, if anyone can give me a dump of Prophet's bootloader + clean registry export, i can take a look at it..
buzz
Buzz,
Thanks for the great offer.
I can give you the clean reg but how can i get you the first part, bootloader thingie?
Regards
I have used the Wizard Extended ROM unlock program to unlock the ROM on my Prophet. I now have a copy of the Extended ROM on my SD Card. I'm not concerned about erasing the Extended ROM files, I just don't wan them installed, so I did a Hard Reset and just when it says that it will start installing the additional prorams in 3 seconds, I did a soft reset.
OK, now I have a Prophet without extended ROM. I can now install the stuff that I want.
Most of the cab files I've figured out, Does anyone know what the following extended ROM cabs do? This is from the latest Imate Jamin ROM.
Default_CAAVPPC_IMEI_2.6.77_range.CAB
Default_Imate_PPC_SA_V5.5.03.cab
Default_MP_Shortcut_MMS1_JAVA_VOICE_CV_051213.CAB
Default_PP_TSK.CAB
Default_PP_UAString.CAB
Default_PT_Signed_IconDll.sa.CAB
Default_PT_Signed_Patch_SD.sa.CAB
Thanks heaps,
Matterhorn
Default_CAAVPPC_IMEI_2.6.77_range.CAB is the anti-virus app which used to play havoc in slowing down the KJAM. Maybe this version is better but I uninstalled it using Remove Programs. About the rest I am not sure. At least you don't have Skype, backgammon and the Operator Settings files so I expect you will gain a fair amount.
Frank
you can use wince cab manager to see the content of the cab file.
Still nothing? Guess I will go the way of Matterhorn when I need to do a hard reset. Several others have not installed the Extended ROM at all and have reported significant speedup in the JAMin.
Frank
That would be me. I haven't installed one thing off the extended rom and my speed is really pretty good. You can see a video review at the link below to compare the m600 and the jamin (with no extended rom). Keep in mind I don't use mms, skype, antivirus anyway....so no big deal to leave off the ext rom. I also use adobe and don't need the clearview .pdf. Hope the video helps
http://www.howardforums.com/showthread.php?t=849592
Thanks, Mike. I don't use the stuff either except MMS once in a while but can just as easily use email for that. I presume Voice Dial is in the Extended Rom but rather have MS VC anyway and things like Connection Manager, Messaging, etc., that I want are not in the Extended ROM so I should be fine.
Now to find time to do a hard reset and re-install my apps.
Frank
Everyone has diffrent issues, I was able to delete the files from there (verified by refreshing the dir, and I recieved no read only error) but I was unable to write files to it, which I thought was very strange, I am using APA_ext_rom_unlock.exe and it does NOT give me the success msg it acts like it hasnt even ran. I updated my ROM to teh test one that was floating auround 2.8.7 whatever, and I realized too late that aWizard has no way to reflash teh extended ROM so I am without all my Cingular apps and I have all the 2.8.7 Extended rom stuff with the 1.8 Cingular OS ROM which I reverted back to. Any suggestions how I can replace my extended ROM ?
any luck so far?
Hi guys,
Are we getting any hope/luck to unlock Ext ROM for JAMin/Prophet?
I don't know how you guys are doing it. I have tried several times to delete items in my extended rom using total commander, at least 10 times and the result is the same. After the hard reset all that was deleted was re-installed after the reset.
I have contacted TC a while ago, and have not heard anything, maybe they are working on it.
Just curious....as I'm new to this ext rom stuff....but why don't you just "not install" the ext rom. Then use gsfinder to install whichever .cabs you want? If any? Just curious as I may be missing something. :roll:
mikewchandler said:
Just curious....as I'm new to this ext rom stuff....but why don't you just "not install" the ext rom. Then use gsfinder to install whichever .cabs you want? If any? Just curious as I may be missing something. :roll:
Click to expand...
Click to collapse
No, I think the end result would be pretty much the same. For me I would like an Extended ROM for the JAMin that includes exacty what I want installed - no Backgammon, AntiVirus, Smart Dialing, Skype and a single Operator Settings file for TMO USA. Then when I hard reset I don't have to mess with anything else, just let it go. I had my KJAM setup that way and I would like the JAMin to be the same. I would also be as close to an OEM install as I can get (without the junk) so I don't have to worry about proper default settings not being there because of some file I didn't install or installed in the wrong order. Having said all this and thinking about it more I am sure you would get to the same point doing your procedure and then installing the required .cab files in the proper order.
Now I have a question:
Wonder what would happen if I did a hard reset, then did the soft reset to stop the Ext ROM install, installed the required .cab files in order, soft reset and then restored from a Sprite BU file. Wonder would I be restoring any files that could cause problems due to an imcomplete ROM install? I guess I will have to try that first since I do hate to re-install a bunch of apps and especially have to re-enter all the reg codes.
Frank
hi i have been looking through this formu but cannot really find what i am after. sorry in advance but if it was covered in other threads please give links.
i would like to upgrade my rom (current i am using pre-installed tmobile mda pro rom) to something batter. the problem is there is so many things in this forum that makes me conufused.
Is it possible (probably it is- but how) to upgrade my ROM by creating my own ROM eg take the best radio rom and extended rom with the stuff i want eg some application i am using right now - instead of normal keyboard get resco keyboard and instead of file explorer get resco explorer and so on and on and put them to the extended rom .
is there any soft to do it ? can someone provide me with links where i can find out something more about ROM cos wiki isnt really helpful and seems to be out of date.
any help wanted !
cheers, cudo
ps. or put tomtom to the extRom...rom that would feauture all the good stuff.
what a pity nobady is willing to help me..maybe u vac just point me to some accurate threads within this forum, if ther are some.
cheers, cudo
To put another Radio ROM in is trivial.
Take out the other two (ExtROM and OS) ROM images and just flash in the Radio file. I did this and didn't even need a hard reset.
To put TomTom into your ExtROM is easy too.
Once you have done your hard reset with your new ROM images and the ExtROM has loaded, you have 10MB of space that you can reclaim. There are instructions at the top of this forum for unlocking the ExtROM and making it appear as another memory area.
Please use backup software regularly so that you don't have to reflash the unit until the next OS upgrade.
Creating a ROM image is more hard work, and I don't know for sure that all the information is accurate. This is only my understanding of the process.
Install the programs that you want in your ROM to your PDA and make a note of the locations of all files and registry entries that are installed.
Take a recent ROM image and unpack it to your desktop.
Delete the programs that you don't want to install, and then search through the hives for the entries that relate to those programs. Delete those too.
Put the files and registry entries of the programs you are putting into your ROM into their post-installed locations.
Rebuild the ROM image.
Flash it in.
Hopefully this won't break your PDA if you get it wrong, I'm guessing that this is very much a trial and error process.
I haven't tried this.
Use this information at your own risk, it could break your PDA.
how do i separate the rom images from each other..i mean radio, os and extended roms ? when i unzip the UNI_TMUK_130114_130232_11003_WWE_BL101_Ship i am getting loads of files but cannot see the right ones.
cheers, cudo
hello everyone!
i am running wm06 for a while now and have to admit, its fckng great!
i upgraded from wm2003 directly to wm06, so its like two different worlds...
but when i was upgrading, i did not manage to merge the extrom with the rest of the storage, the unhide and unlock thing just didn't work!
but as i am now sure, that i wont need to roll back to 2003 again, merging the extrom with the rest of the storage would only make it better, no disadvantages, am i right?
or am i needing the extrom in wm06?
how is it used in wm06?
or is it just wasted space....?
as u can easily see, i am still a little confused about all that....
here are some specs from my device:
ROM Version: 5.60.00 WWE
ROM Date: 03/02/05
Radio Version: 1.15.00
Protocol Version: 1337.45
ExtROM Version: - (nothing here...??? is that bad??)
STORAGE:
total: 42,92MB
in use: 28,26MB
free: 14,66MB
PROGRAM:
total: 109,12MB
in use: 40,23MB
free: 68,90MB
thx for any help,
regards,
krz
ExtROM: Extended ROM - is the section of the ROM which the distributor of the phone (eg O2, T-Mobile, iMate, etc) store their customization (eg Today theme, ring tones, extra software) data.
In WM2003 you may found your phone having hardreset quite often - thats because WM2003 use RAM as program-storage (RAM lose everything when battery is drained)
In WM5/6 you are not using RAM as a storage anymore thus not performing hardreset often (typically once during flash)
By performing ExtROM merge, you're going to have extra MB in storage. There is NO DISADVANTAGE.
Those who prefer to have an ExtROM for whatever reason (they may HardReset their phone quite often because of testing/developing/whatever) place the "ExtROM" folder in Storage Card (Memory card/SD/MMC) and after HR it gets installed as usual. Or you can install fixes and addons "one by one".
Read more information here : http://wiki.xda-developers.com/index.php?pagename=BA_ERK_Understand
----
To sum it up :
You dont need to merge your ExtROM (it cost you some MB)
* How to merge / is here : http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardMain
thx a lot for your answer, kerio...!!
if i understood you right, the EXTROM is of NO USE at all in WM06.
so if not merged before upgrading, it will be just invisible and unused space.... am i right?
if so, i would of course prefer to merge the EXTROM with the rest of the storage to gain more free megabytes....
will the total storage size be 60,3MB after merging, like i have seen in this thread: http://forum.xda-developers.com/showthread.php?t=326515 ?!?
is it possible to merge the EXTROM after having WM06 installed?
can i merge EXTROM without reinstalling WM06 and all programs?
btw: unhiding and unlocking is NOT working on my device....
when clicking UNHIDE, nothing happens,
when clicking UNLOCK i get the following error:
Code:
ERROR: FL_IOCTL_BDTL_HW_PROTECTION - The parameter is incorrect.
what am i doing wrong??
i know, that are a lot of questions, but i would be very thankful if someone could help me with that...
thx in advance!
regards,
krz
bump bump
I would also be interested if somebody suuggests new solutions for "big storage" as my device does accept unlock and unhide, but when using "repart_DOC.exe" it gives me errors and eosn't repartition the ROM...
Downgrade to WM2003 , play da game and flash to wm6
Xeon's got the idea. You will need to to downgrade to WM2003, unlock, unhide and repartition the extrom. Once complete then flash up to the WM6.
I had to do the same thing, as I had not correctly repartitioned the extrom when I moved up too WM5. Good luck.
hello and thx a lot for all your ansers!
how many MBs will I gain from merging EXTROM?
and is there a way to use that space without merging?
anyone knows??
i have wm2003 and i can't unhide , unlock, or format doc, cos everytime i'm trying i can see , FL_IOCTL_BDTL_HW_PROTECTION the parameter is incorrect, can anyone help me?
Nicolfa said:
Xeon's got the idea. You will need to to downgrade to WM2003, unlock, unhide and repartition the extrom. Once complete then flash up to the WM6.
I had to do the same thing, as I had not correctly repartitioned the extrom when I moved up too WM5. Good luck.
Click to expand...
Click to collapse
We got the point now.
Advise the wiki should be revised as so many people are confusing about the ExtROM.
Thanks
Dear tangwd898,
lol
Have you ever read the wiki? Could you give me the parts where "you must revert back to WM2003" is missing?
kerio said:
Dear tangwd898,
lol
Have you ever read the wiki? Could you give me the parts where "you must revert back to WM2003" is missing?
Click to expand...
Click to collapse
Dear kerio,
I did read the Wiki regarding the ExtROM for more than 3 three times, I can't get any informations that we can't modify the ExtROM in OS wm5.0 or wm6.0 from the thread - Understanding the Blue Angle Extended ROM:-
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_Understand
Understanding the Blue Angle Extended ROM
The Extended ROM is shipped as ms_.nbf and loaded with the BaUpgradeUt.exe
The ms_.nbf is extracted during the Upgrade and written to folder \Extended_Rom
The \Extended_Rom folder is hidden and read only
The Extended ROM can un hidden with the following tool Unlock tool
The Extended ROM is limited to 16MB in size
The Numbering of the Extended ROM is operator dependent:
Thus a QTEK version 1.22.225 might or might not have higher patches than a I-Mate version 1.22.62
Extended ROMs are built around the major OS release (1.22, 1.31)
It is NOT advisable to install cabs from a Extended ROM if the Windows Mobile 2003 Version are not the same
It is NOT advisable to install patches if the CE versions (1.22, 1.31) are different.
(They might have already been included in that CE version.)
Execution of the Extended ROM
CheckAutorun.exe (which is started from \Windows\Startup\CheckAutorun.lnk) executes the AutoRun.exe
AutoRun.exe is found in the \Extended_Rom Folder
AutoRun.exe reads the \Extended_Rom\Config.txt and executes the commnands in that file
The pointer for AutoRun.exe HKEY_LOCAL_MACHINE\Comm\AutoRun is set to \Extended_ROM\AutoRun
The pointer for Config.txt HKEY_LOCAL_MACHINE\Comm\AutoRunCFG is set to \Extended_ROM\AutoRunCFG
The Touch screen is disabled by the first command (TPDisable.exe)in the Config.txt
The Touch screen is enabled by the 2nd to last command (TPEnable.exe)in the Config.txt
The last Command of the config.txt (RST) performs a soft reset
Content of the Extended ROM
The Extended ROM consists of System files (TPDisable.exe, TPEnable.exe, AutoRun.exe, Config.txt)
The Extended ROM consists of *.CAB installation files
The installation files fall into the following types
Applications: Album, Fax, Zip
Patches for the Hardware: Button9 on the Hardware Keyboard
Patches for the software: Blue tooth upgrade
Provider specific files and programs: Splash screen, Internet Explorer defaults, telco settings, etc.
Effects of a Hard Reset
A Hard Reset will NOT re-extract the ms_.nbf
A Hard Reset will reload the contents of the \Extended_Rom folder
A Hard Reset will reload the OS and thus also clean the registry
Why is this of interest to me?
The Extended ROM can be cooked (Customize the ROM to your own liking)
What ever you put in the \Extended_Rom folder will remain even after a Hard Reset
The \Storage will not be overwritten on a Hard Reset
Thus one is able to keep CAB files on \Storage for automatic reinstallation after a Hard Reset
You can keep your "customized" Extended ROM and only perform a OS or Radio Upgrade
Click to expand...
Click to collapse
"you must revert back to WM2003" - may be found at other threads but i think this thread "Understanding the Blue Angle Extended ROM" should include this message.
Thank you.
I dont think so
When performing upgrade you should follow the instruction (WM5 and WM6 pages) when you dont - then you may find yourself in trouble.
1. The main page is only for WM2003
2. Error message -> google -> sollution (30sec)
3. You can add it to the wiki (anyone can)
Effects of a Hard Reset
A Hard Reset will NOT re-extract the ms_.nbf
A Hard Reset will reload the contents of the \Extended_Rom folder
A Hard Reset will reload the OS and thus also clean the registry
Why is this of interest to me?
The Extended ROM can be cooked (Customize the ROM to your own liking)
What ever you put in the \Extended_Rom folder will remain even after a Hard Reset The \Storage will not be overwritten on a Hard Reset
Thus one is able to keep CAB files on \Storage for automatic reinstallation after a Hard Reset
You can keep your "customized" Extended ROM and only perform a OS or Radio Upgrade
Click to expand...
Click to collapse
I still have some questions:-
- Why my *.cab files in the extROM folder all missing after i done a hard Reset?
- How to keep all *.cab files in the ExtROM folder after the hard reset?
Thank you.
Guys and Gals
The BA Wiki was started over 2 years or more ago by a new guy on the forum who trying to work out how to get his German MDAIII flashed with an English rom.
He wrote it in order that the information was found in one place as he found it hard to find it in all the threads, this finding problem is still true today.
Well as you see times have changed and the porblems of WM5 and WM6 were not know at that time and as you also see not many people have bothered to invest time back into documneting in wiki. Its become more of a get and ***** about wiki not being updated than a give back some of the time in searching the threads and update wiki for the next person.
Some were in the begining it says if you don't like what you read then fix it.
This is best done by those people that are going through the learning curve as they read Wiki and they should beable to correct / add / embelish on what is written and what needs to be said.
Its a thought.
tangwd898 said:
I still have some questions:-
- Why my *.cab files in the extROM folder all missing after i done a hard Reset?
- How to keep all *.cab files in the ExtROM folder after the hard reset?
Thank you.
Click to expand...
Click to collapse
Misson impossible is that type of Cab file that is no longer there after a hard reset (or when they are executed) as they delete themselves.
Change the properties to read only will solve that.
Check out the kitchen
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_Things2know