tomtom n5 serial port issues on the mini s - 8125, K-JAM, P4300, MDA Vario General

Does anyone know wheter the AKU2 service when realeased will solve the problems with tomtom not allowing you to select the only two available com 6 and com 7 ports.
Iv'e been scanning other threads and can't find an answer to resolve the probelms with connecting a bluetooth gps devise to tomtom on the mini s.
My mini s is operating on ROM 1.5.4.2 WWE and doesn't have the required serial port manager, is this a common probelm.

Can I ask what version of TomTom you have installed?
I set-up my XDA Mini S last night with no problems. Connected to my cheapo bluetooth GPS reciever (£40 from Mobilefun) to tomtom (v5.210) using COM7.
You need to set-up the com port for the device in the bluetooth connection manager first and then the port should be available in tomtom.

I have tomtom nav 5 installed.
I have also installed the V 5.2.1 patch (if thats correct) from the tomtom website.
I'm using the Holux 236Slim GPS receiver, but when i go into tomtom and configure using Other NMEA GPS on baud rate 4800 (seen this reccomendation on other forums) i can only select COM9, COM3, COM0 and COM2.
In my bluetooth manager i've set up the outgoing port to COM7 (it recognises the devise) but it still doesn't appear in the tomtom configuration.
I'm pulling my hair out with this one, it seems as though may others are having the same problem but i can't find the solution.
Thanks for any help you can give me.

loz said:
I have tomtom nav 5 installed.
I have also installed the V 5.2.1 patch (if thats correct) from the tomtom website.
I'm using the Holux 236Slim GPS receiver, but when i go into tomtom and configure using Other NMEA GPS on baud rate 4800 (seen this reccomendation on other forums) i can only select COM9, COM3, COM0 and COM2.
In my bluetooth manager i've set up the outgoing port to COM7 (it recognises the devise) but it still doesn't appear in the tomtom configuration.
I'm pulling my hair out with this one, it seems as though may others are having the same problem but i can't find the solution.
Thanks for any help you can give me.
Click to expand...
Click to collapse
I had same problem last week. I suggest uninstall everything related to tomtom and find version 5.21 after the installtion your device (tomtom) will recognize the port 7 immediately... Regards...

COM ports mismatch
I had the same problem of mismatching COM ports for settings Active Sync sinchronization via bluetooth between PC and PDA Wizard.
I solved this problem by deleting in registry editor the serial devices which were configured on COM6 and COM7 ports on my PC (they were used from a USB-to-serial adapter).
Search in registry editor of your PC which device are configured on COM6 and COM7 ports and remove them from registry if you can.
I strongly suggest you to backup your PC registry before making any changes. Do it only if you are sure of you are doing.
Of course you need PC Administrator profile in order to make any changes to PC registry.
Bye. :wink:

Have a look at this thread:
http://forum.xda-developers.com/viewtopic.php?t=43412

hmmm... as mentioned above it just worked for me but I did a clean install of v5.210 of tomtom and did not do an upgrade.
I think from looking at other posts the version of tomtom is important.
Do the uninstall and see if you can get hold of a full v5.21 installation as I have seen some kicking about on various torrent sites.
Sorry I'm not more help.

loz said:
Does anyone know wheter the AKU2 service when realeased will solve the problems with tomtom not allowing you to select the only two available com 6 and com 7 ports.
Iv'e been scanning other threads and can't find an answer to resolve the probelms with connecting a bluetooth gps devise to tomtom on the mini s.
My mini s is operating on ROM 1.5.4.2 WWE and doesn't have the required serial port manager, is this a common probelm.
Click to expand...
Click to collapse
I have the same problem still cant fix it tt works and rund bet there is ne com 6 or 7 avalable in tt but it is the only bt choices
any more advice

I don't think you will - Com 7 only seems to appear in TT V5.21
See here for more info.
http://forum.xda-developers.com/viewtopic.php?t=43412

Related

Bluetooth GPS COM Port problem

Hi, I have a brand new XDA Mini, but with Qtek S100 WWE Rom 1.12, and I bought a Bluetooth GPS, Xaiox NAVOne 2.0...
Bluetooth manager can see the gps without problems, but my Medion2004 Navigation Software says, no GPS is avaiable.
I've already read in the users manual, that GPS needs Com8.
As I see in Start -- Settings -- System -- Bluetooth settings, xda mini has Com5 for outbond port, and Com4 for inbound port.
How can I change ? No program is running, if I check.
Please, help me, thanks.
Nobody has a good idea ? I have already tried the Pocket Bluetooth Tools, it can give a solution, to change COM port 5 to COM port 8, my bluetooth gps requires this port.
BUT, this screenshot appears only a small moment (0,1sec) when I install NAVone2.0 gps...
I installed this gps 100 times, everything is the same.
Can you suggest me another bluetooth tools application?
The problem is simple, to change COM 5 to COM 8.
Thanks in advance.
You could try installing gpsgate from franson
http://franson.com/gpsgate/
change software!
I think you should try change software. I have tomtom 5 to my s100 and it works just fine..

Bluetooth GPS configure with Tom tom

Hi,
I just installed tomtom version 5 on my MDA Vario but I can't seem to get the tomtom to recognise my 32 channel bluetooth receiver.
Tom toms configure screen only allows me Comm ports 0,9 or 3 whilst the MDA only allows me to set up the outgoing Comm ports as 6 or 7 !
As a result I cant get tomtom to receive a signal from my receiver !
Can anyone help ?
Thank You
Steve
Try setting up new bluetooth connection to serial port, untick the make private box, then on tomtom gps settings use com port 6 although on a XDA though, still worth a try eh?
Believe that this bug is resolved in TomTom version 5.21 (download from TomTom website)
asriel said:
Can anyone help ?
Thank You
Steve
Click to expand...
Click to collapse
Check out my solution here...... http://forum.xda-developers.com/viewtopic.php?t=46634&highlight=
gibbsy said:
Try setting up new bluetooth connection to serial port, untick the make private box, then on tomtom gps settings use com port 6 although on a XDA though, still worth a try eh?
Click to expand...
Click to collapse
Cheers but there is no 'make private option' on the MDA although assume unticking 'secure connection; is the same thing ?
Either way I am still without the ability/option of selecting Com port 6 on tomtoms configure screen....
Try.
Pair the device, then put a tick in serial port and save.
choose the COM Ports tab, then tap new incomming port (COM6)
Then startup tomtom and it should find it when you select COM6 in other bluetooth GPS.
Danny-B- said:
Try.
Pair the device, then put a tick in serial port and save.
choose the COM Ports tab, then tap new incomming port (COM6)
Then startup tomtom and it should find it when you select COM6 in other bluetooth GPS.
Click to expand...
Click to collapse
As before I still do not have the option of selecting Com6 from withing tomtoms configure screen.......
strange :S
Can you confirm which version of tomtom your using and what it reports available connections in tom tom.
Danny-B- said:
strange :S
Can you confirm which version of tomtom your using and what it reports available connections in tom tom.
Click to expand...
Click to collapse
Using Version 5.10
Config within Tomtom offers -
COM9:
Infrared Port
COM3:
COM0:
COM2:
Serial Port
This is the same with either "Other Bluetooth GPS" or Other Cable NMEA GPS...
Have also changed Cfg file in Navigator folder to that offered elsewhere with no effect...
There is a bug with the version your using, you need to update it to version 5.21
heres a link to the patch http://www.tomtom.com/support/index.php?FID=3361&Language=1

Setting up BT GPS for TomTom on o2 XDA Mini S... HELP!

Hey all!
First post here!
Ive installed TomTom on my o2 XDA Mini S but am having some problems getting the BT GPS receiver to communicate!
Ive had a search on this forum and followed these instructions:
To install your BT GPS receiver. First pair the device. Then add a new COM Port under the Bluetooth settings. You want to add an OUTGOING port. I usually specify it as COM0. Then start up TT5, go into GPS configuration, selct "Other BT Receiver", then select COM0 from the menu. TOMTOM will automatically start up BT (it doesn't have to on before you launch the program), find the already paired receiver and start communicating with (give it some time though. the whole process takes about 30 seconds to a minute).
Click to expand...
Click to collapse
Sooo.. under the bluetooth settings i could only choose between COM ports 6 and 7 - so i chose 7...
However in TomTom it only lists COM port 9 as an available COM port!? :?
Anyone else had problems with this or can offer any advice??
Any help much appreciated!
Mark
Ive done some more searching...
It appears that my problem might be due to the fact that my TomTom is version 5 and i read somewhere that only version 5.2 is compatible with WM5 phones? Is that correct??
Would updating my TomTom to v5.2 therefore allow me access to configure the COM ports correctly - or even better do it automatically so that i dont need to configure it manually! lol ??
Hi Mark,
i had the same problem - basically if you have Navigator 5.21 when you goto GPS CONFIGURE in TomTom you will see com ports 6 & 7 listed.
In the bluetooth settings of your XDA the GPS receiver needs to be set to COM 6 and the incoming port needs to be set to COM 7.
you only have to do this set up procedure once.
That should do it!
regards
Mark
and don't forget to set the connection to be NOT secure, when you specify the outgoing COM port...if you chose a secure connection, tomtom will forget the pairing when you restart your GPS...
also, if the com port is not listed in the TomTom GPS configuration, you can chose another port, shut down TomTom, and manualy change the com port to the desired com-port by editing the navigator.cfg configuration file
CIAO!
VOODOOS!L

TYTN TomTom Bluetooth GPS

Got my htc tytn loaded totom 5 onto it and guess what bluetooth gps doesn't work with it! Cannot get correct comm port .According to HTC TomTom know about this. Just hoping somebody already has a fix for this?
Had no problems pairing my BT Slim GPS with my Vario II, TomTom runs fine.
What GPS receiver you using ?
works fine on my xda trion as well.......im using tom tom 5.21 with BT-338 gps receiver.......im also using com port 0......you basically have to pair it and then add outgoing port as com port 0.....and during the installation on tom tom make sure you choose com port 0......that worked for me anyways....hope that helps.
Bluetooth GPS HTC TYTN
Thanks guys have re-installed tomtom and now it comes up with com prt 0.Probably didn't install correctly first time .Now up and running .Fantastic!!!!
I could cry
Hi everyone - I am having a similar problem
I have a new GPS receiver and have established a bluetooth partnership and done the outgoing port to com0 which is the default.
Tom Tom is installed and when I try and configure it I am not seeing all the options shown on the website. It just says no gps detected or something similar. I am sure its something simple.
Can anyone help please?
mobilecat said:
Hi everyone - I am having a similar problem
I have a new GPS receiver and have established a bluetooth partnership and done the outgoing port to com0 which is the default.
Tom Tom is installed and when I try and configure it I am not seeing all the options shown on the website. It just says no gps detected or something similar. I am sure its something simple.
Can anyone help please?
Click to expand...
Click to collapse
There's a program CreatePorts that is floating around (you'll have to do a search) that allows TomTom to see additional com ports in the Bluetooth GPS setup. I used this same program on my Samsung i730, and now on the 8525.
You just paid your GPS with the PPC, create the outbound port (in my case I used com 2), run CreatePorts, and then go in to TomTom GPS setup.
Once you get it set up, you don't have to run the app anymore, and TomTom works great
OUCH
dew.man said:
There's a program CreatePorts that is floating around (you'll have to do a search) that allows TomTom to see additional com ports in the Bluetooth GPS setup. I used this same program on my Samsung i730, and now on the 8525.
You just paid your GPS with the PPC, create the outbound port (in my case I used com 2), run CreatePorts, and then go in to TomTom GPS setup.
Once you get it set up, you don't have to run the app anymore, and TomTom works great
Click to expand...
Click to collapse
I tried running this but i can still only assign certain points from my bluetooth manager and dont have these displayed on the tomtom menu.
When you go into the GPS Status settings on Tomtom and tap configure, have you tried looking to see which com ports it lists and then going back to the bluetooth settings and doing trial and error to allocate any of those port numbers as an outgoing port for your GPS unit?
For my genuine Tomtom GPS unit, I did not even have to set up a port, I just had to pair the device but when I used a friends alternative brand of GPS unit for a short while, I was only able to get that one working under Com port 4. I can't quite remember but it may even have been a case that Com 4 only became visible in the Tomtom GPS configure menu after I had allocated it as an outgoing port for the GPS device (sorry, it is a while back so I can't quite remember the order in which I set it up)
Hope you get it sorted
arghh
I a so annoyed. I did this and had no luck. Later on I did something and got the option for port 2 and used it and it was great. I had to do a soft reset for something else and I cant do it again. tried everything.
MMMM
Happy yet frustrated
I have deleted create ports from my device as it only works once. I have reset my device. I reinstalled createports and extracted the file. I then saw port 2 straight away - the one that had been missing in tomtom.
The only problem is that if I do a soft reset I have to do that again!
It is very frustrating trying to get some of these things working. Have you thought about upgrading to Tomtom 6? you may find you have less problems getting the pairing and ports working right.
Failing that, I am sure you will be able to get it working again, just keep trying all the com ports one by one until you find one that appears in the Tomtom configuration. Like I said, on my XDA Vario II (Hermes) I managed to get it working on Com 4 and when I had an XDA Mini S (Wizard) I seem to remember that it was either Com 6 or Com 7 which worked on that one.
You might want to check the bluetooth settings for security and beam as well. Try turning security off (ie. passkey required off) and make sure the beam setting is ticked to receive all incoming beams.
I will keep my fingers crossed for you
download co-pilot for uk
Dashley said:
Got my htc tytn loaded totom 5 onto it and guess what bluetooth gps doesn't work with it! Cannot get correct comm port .According to HTC TomTom know about this. Just hoping somebody already has a fix for this?
Click to expand...
Click to collapse
Any one got the co-pilot softwear to insallate for MDA VARIO 2.
download co-pilot softwear for UK.
Any one got the co-pilot softwear to insallate for MDA VARIO 2.
another thread
I have just seen another thread about XDA with a patch for this that seems to work. Can someone merge the threads?
Createports
Can anyone point me in the right direction to find this program. I think that it is hidden on the web somewhere near the holy grail.
Help with TT6 + TYTN + Royaltek 2110 please
I have a TYTN and a GPS Royaltek 2110. I have position com0 and other programs GPS work correctly. The problem is that the TT6 always shows he himself message “GPS nonfound”, although always I can say to him that this in the COM0 but does not find satellite.
That I can do? I put the TT5
somebody it has the CreatePorts program and it can put it?
Thanks
try this thread:-
http://forum.xda-developers.com/showthread.php?t=288865
Pairing TOMTOM 6 with Bluetooth GPS
For all of you that are having problems pairing your GPS Bluetooth receiver with your Hermes see the instruction set below:
#Hermes can not be in flight Mode#
1st: Run BTHTools1100.exe
--------------------------------------------------------------------------------------------------
2nd:
Pair them in Bluetooth Manager
Set:
Holux (outgoing port com4)
Incoming Port (com8)
no security
------------------------------------------------
3rd:
In settings >> Connections >> GPS
Programs set GPS program port to Com 8
Hardware set GPS hardware port to Com 4
baud rate 4800
If GPS program is not seen in settings\Connections
Use resco registry or other program and:
Go to Hkey_local_Machine\ControlPanel\GPS settings\ creat (make new) "Group" with Dword data =2
---------------------------------------------------------------------------------------------------
In TomTom chose:
Bluetooth GPS
Com4
should be working Now
Pairing TOMTOM 6 with Bluetooth GPS (easy) - Kaiser
First after reading the posts I thought I had to reinstall Tom Tom or install another software. Luckily, I paused and read the message when I was about to configure my other bluetooth receiver. It said, first you must establish your bluetooth connection. Well, I lied coz I did try to go on and couldnt find COM 0 or whatever you guys have said.
But that's what I did, eventually. Paired the device as BT GPS, check the serial connection (not sure if secure connection needs to be checked but I left it unchecked to find out later). After that go to com port tab, and click add new port ie selected COM0.
Then go back to TT6 (restarted in my case), and to other bluetooth gps receiver then found COM 0 in there. Voila!!
Chose COM0, but still got no gps device message. Waited for about 2 mins while reading further into the posts and now my TT6 is working.
You could call that strike of luck I dont really care but yeah.. saving some batt power on my kaiser for the bank holiday;s trip. Have a great one everyone!!
P/s: Mine is O2 stellar on Dutty's great work.
Com 4 is the only one that works with Schaps 3.54

Universal + BlueTooth GPS problem, help

Dear Htc fellows,
My bluetooth GPS is working strange on my Universal, but on iPaq with
WM2003 works as a charm. The BT GPS is new Solar GPS with new Mediatek
chipset.
It's not working with iGo 2006 and even not Tomtom 5 or Tomtom 6.
I can find the BT GPS in BT manager, I can pair it, but I dont know why,
it needs a pass key even if it shouldn't. Then when I explore it's
services, The popup come again asking me if I will allow external BT
device to connect to my Universal and it come asking passkey again (Why?).
I can't even enter an empty passkey (bt device doesen't require it). After that I have successfully paired the device. I can add it's serial port to enumerate on com ports 8 or 4.
When I start Tomtom, it doesent detect the device at all. If I use iGo, it detects, gets datas and disappear, it's allways appeared for 1 second and then 5 seconds not. No matter Which bitrate I set (device is written to be 9600) it needs to be in NMEA protocol, not SIRF.
When I use some freeware GPS programs, it seams to be working ok, it shows satelites and it's not disappearing.
What can I do with that???
I have some idea that it's probably about WM5 and it's security....
How can I setup com security in registry? can I set the port speads manually atd... I had performed a hard reset and it still don't work. Can ROM update or AKU update help me?
Does anyone have some idea what should I try now?
O2 XDA EXEC:
Rom: 1.30.107
Radio:1.09.00
P:42.42.P8
BT GPS: model: BT 2.5MR
made by f-tech.com.tw
Thanks;
Shef
Could you find a solution??
Hi,
I have the same problem exactly and could not find anything on the net. Did you solve your problem?
well ...
i know that there is a problem with GPS and WM5 and so there is this patch which i install every time i hard reset .....
the guys i bought MY GPS from gave me this ... and they are pretty knowledgable .....
it works well ....
try it !
tried
My OS version is WM2003 but tried anyway.. Did not work.. can there be version for WM2003??
did you ?
did you define an outgoing com port for the device (com 4 for example ?)
com port definition
well, igo finds the device an COM 6 actually, it connects too.. but stays connected just for a second, then again and again..
I installed GPSGate and created a virtual com port 7. I manually configured the GPS receiver connection to COM 7 on igo.. But all the same.. :
do you advice another way?
one other thing the device works with navigon 5.0 and tomtom 6.0 smoothly, no problem.. only igo..
well...
IGO is CRAP ... that is well known .... lots of bugs ...
i am sorry .. i do not know how to solve your problem...
but i suggest using destinator 6 ..... (that's what i use) ....
simple ... nice looking .... big buttons and able to navigate to your contacts directly (especially useful if you have Phone Edition)
oh ... and ... works great !
I got the Holux GPSlim 236 GPS. I can pair the GPS with Universial. But I cannot set the com port at all. A pop up window always say the com port (I tried everyone of the ports) is not available.
Any one got a solution, does the GPS bug fix help ? and what does it fix ?
Might seem a bit obvious, but have you tried the code "0000" when pairing your device?
Once paired...did you define an outgoing serial port on "Bluetooth Settings" menu on your WinCE?
I have a royaltek bluetooth GPS and it's been working well with TomTom[5|6]...I use '0000' as passkey (default on many 'non-interactive' devices), once paired I clicked on 'COM Ports' tab and defined a new outgoing port, the wizard should list the GPS as an available device to create a COM port so I used it and I got a 'com0'.
Once the outgoing port was created I had to tell TomTom to use the new 'com0' and worked like a charm
It's been working since TomTom 5.21 (previous versions didn't work).

Categories

Resources