Hi, pals! I have an XDA IIi-PH10C with the original ROM as followed:
ROM Version: 1.11.00WWE
ROM date: 01/27/05
Radio version: 1.00.00
Protocol version: 1337.39
ExtROM version: 1.11.162WWE
Yesterday I downloaded the newest ROM from O2 website and updated to 1.11.171WWE successfully. Today I thought why not update a Chinese ROM, so I downloaded the CHT ROM from this link:
ftp://ftp.xda-developers.com/Alpine...00_SHIP/AP_DOPOD_CHT_11106_110_10200_Ship.rar
I followed the instructions carefully but right after the program had checked the device information and I click 'Update' buttom, the program gave me this error message:
'ERROR 120:COUNTRYID ERROR'
The updated had been terminated.
Are there anything wrong with the ROM? I had been thinking maybe the ROM was not suitable with my XDA IIi. XDA IIi was also known as Dopod699, is this the problem? But I knew someone in this forum had updated Chinese ROM successfully. I am really confused now, I would be very grateful if somebody be so kind to share his experience. A million thanks!!!!!!
Please goto download file MaUpgradeUt_noID.exe
I had used this program for updating,even had modified file 'RUU.conf', adding a sentence 'CHECKCEID=1'(can't remember if this is correct).
Sometimes all it takes is to run the update prog a second time, without touching the device.
Thanks for your reply. I had been trying servel times, it kept giving me the same error message. So I took a compromise: install a Chinese langage support patch(downloaded from http://www.hi-pda.com).
I think this patch works very well, my XDA IIi displays Chinese characters properly, I can even send a CHS message after I installed PlumSIP. Now I realy enjoy my XDA which has an English ROM and CHS support.
Related
Updated rom's to version Radio 4.16 and Rom 3.15.15
URL: http://julia.online.o2.nl/xda_downloads/xda_software1/RUU_ENG.exe = ROM upgrade
URL: http://julia.online.o2.nl/xda_downloads/xda_software1/RSU_ENG.exe = RADIO upgrade
Hello i was wondering if the above ROM updates will work on my QTEK 1010:
ROM Version: 3.16.13 ENG
Radio Version: 3.19.01
I mean anyone tested if before or managed to upgrade his QTEK with the above ROM versions from O2 and were there any complications!!
:?: :?: :? :?: :?:
Thanks
Yes I did and it worked fine. I have it running on T-Mobile MDA, Qtek 1010 and Eurotel dataphone (rebranded Qtek). No problems.
I tried to upgrade and got the following error:
----------------------------------------------------------------------------------
The ROM Image that you are trying to upgrade is not compatible to your pocket pc.
Here are there differences:
Your device information:
ModelW10A:007
ROM Version: 3.16
Language: English
Your upgraded image information
ModelW10A:001
ROM Version: 3.15
Language: English
Please download the compatible utility and try again
-----------------------------------------------------------------------------
So where is the problem?
Thanks
nanis
It has been answered a few times, look through fora. it's a general pocket pc language change question, but applies to this one too. You need to rewrite the ROM header to match your device. Can be sort of tricky if you don't know what you're doing.
Did you install it
I have the same qtek with 3.16 and 3.19 shall I do it or wait to uk version?
If you don't mind O2 startup screen & O2 autoconfig...
supplier or distributor
nanis said:
I tried to upgrade and got the following error:
----------------------------------------------------------------------------------
The ROM Image that you are trying to upgrade is not compatible to your pocket pc.
Here are there differences:
Your device information:
ModelW10A:007
ROM Version: 3.16
Language: English
Your upgraded image information
ModelW10A:001
ROM Version: 3.15
Language: English
Please download the compatible utility and try again
-----------------------------------------------------------------------------
So where is the problem?
Thanks
nanis
Click to expand...
Click to collapse
Hi,
My advise to you is to try to get the latest rom upgrade from
either your supplier or distributors.
Also be very wary and careful when you got advice from this
forum on where or which website to download etc especially the
one which you do not have any informations if it suit your device
or not. If it is not suitable then after downloading it to your device
it will freeze up and you have to get it replaced. These people who
give advise take for granted everyone who view this forum are
professional like them. They never realise there are lots of new
users of the device that are trying to find out more informations.
Sometimes no warning was given to you when they just give you
the website to download etc.. I am one of those new user and also
I believe one of the victims too. I do support their intetests in this
forum but not the way some of the advise are given. Hope they
got the message. So good luck to you and happy upgrading.
Why on earth would you want to go from 3.16/3.19 to 3.15/4.16? Makes no sense to me...
bamse: because it's better
I'am used xda radio upgrade 4.16.00 with qtek
it is fine
I previously flashed my rom version from ATT/Siemens upgrade,A.20.17, to the XDA-Developer's 3.17.03 using usb cradle. This was so I could unlock my sim card. Everything worked smoothly, I can make calls and everything. Now I want to upgrade to the new ATT WM2003 and it tells me that "The ROM image that you are trying to upgrade is not ucompatible with your Pocket PC.
Your current device information:
Model: PW10A1
ROM Version: 3.17
Lang: English
Your upgraded image information:
Model: PW10B1
ROM Version: A.30
Language: Eng
So I tried to upgrade back to A.20.17 hoping I could go from it to WM2003, No luck. Any suggestions? :?
I think the installer is mismatching the version numbers. Your XDA thinks its a PW10A1 which if I'm not mistaken, is the Euro version of the xda - probably down to you using the XDA-dev rom.
A simple solution to your problem is to extract the rom update and use a SD card together with XDAtools to flash your device to WM2003
Why does the RUU package I downloaded say it won't work on my device?
The software in the RUU package checks whether the type identifier in your Wallaby matches the one with the ROM image. So if your Wallaby claims to be a German O2 XDA, the English Qtek 1010 version of the OS will not install. Our tool adaptROM makes this problem go away. (See below)
Click to expand...
Click to collapse
found in http://wiki.xda-developers.com/wiki/WallabyFAQ
I knew i'd seen it somewhere ! :lol:
Thanks maltloaf, I'll try out the XDAtools and see if that does the trick. I'll post my findings.
Hi, pals! I have an XDA IIi-PH10C with the original ROM as followed:
ROM Version: 1.11.00WWE
ROM date: 01/27/05
Radio version: 1.00.00
Protocol version: 1337.39
ExtROM version: 1.11.162WWE
Yesterday I downloaded the newest ROM from O2 website and updated to 1.11.171WWE successfully. Today I thought why not update a Chinese ROM, so I downloaded the CHT ROM from this link:
ftp://ftp.xda-developers.com/Alpine...00_SHIP/AP_DOPOD_CHT_11106_110_10200_Ship.rar
I followed the instructions carefully but right after the program had checked the device information and I click 'Update' buttom, the program gave me this error message:
'ERROR 120:COUNTRYID ERROR'
The updated had been terminated.
Are there anything wrong with the ROM? I had been thinking maybe the ROM was not suitable with my XDA IIi. XDA IIi was also known as Dopod699, is this the problem? But I knew someone in this forum had updated Chinese ROM successfully. I am really confused now, I would be very grateful if somebody be so kind to share his experience. A million thanks!!!!!!
Chinese language support patch installed
I had been trying servel times, it kept giving me the same error message. So I took a compromise: install a Chinese langage support patch(downloaded from http://www.hi-pda.com).
I think this patch works very well, my XDA IIi displays Chinese characters properly, I can even send a CHS message after I installed PlumSIP. Now I realy enjoy my XDA which has an English ROM and CHS support.
hi i am new to this site i am having xda2i with following confg.
ROM version: 1.11.00 WWE
ROM date: 01/27/05
radio version: 1.00.00
Protocol version :1337.39
ExtRON version 1.11.171
model PH10c
now i have few question
1. i have read that xda2i cant be upgrated to windows 2005 is it true?
2.what is the latest version for xda2i and where i can downloaded it.
3. i have seen many people using radio verion 1.18,1.19 but i am using 1.00 can i upgrade my ROM version of my xda2i and which is the best radio version for xda2i keeping in mind signal reception,battery,voice clarity,bluetooth speed etc
hope i get all my answers
thanx in advance
regards majnnuu
no one to help me??????????????
Here ya go....
1) Correct. You can't upgrade your 2i to WM5.
2) I would recommend downloading one of pug's ROMs. You can find them here: ftp://xda:[email protected]/Alpine/O2_Roms_Camera_Fixed_Bug/
If you hate the o2 active stuff, then download the one marked "o2stripped" (I would recommend this one). If you like the o2 active stuff, then download the other.
3) The latest Radio ROM available for the 2i is version 1.04. If you upgrade your ROM using one of pug's rom, then your radio will automatically be updated to version 1.04.
Justin
BTW, I think your device is an Alpine, not an Andes.
Got a problem I'm hoping someone can help me with.
I was updating my rom and it all went wrong. When I turn my xda2i on now I get the normal setup then its goes to a black screen with serial written on it (or usb if it is in the cradle), and apart from that it does nothing.
My laptop no longer recorgnises the device so I can't restore the old rom or restart the process????
Can anyone help please?
tez,
You're in what is called "Bootloader". You're OK. You can do one of two things:
1) Simply re-attempt to "reflash your ROM" with one of the ROMs you downloaded.
2) Reflash your ROM with a ROM update provided your manufacturer. I couldn't get my device to update with one of pug's rom (it go stuck around 18%) so I had to reflash my Alpine with an original ROM released from a manufacturer.
Hope this helps.
Justin
Hello,
Firstly, I must say that I previously posted this thread on a wrong forum.
I am relatively new in this forum and also new in flashing a new ROM. I have a HTC p3300 with original WM6 which I bought some years back. So my PDA is open (not given by a telephone company).
Relevant Information
ROM Version: 3.13.405.1 WWE
ROM DATE: 8/28/07
Radio Version: 02.94.90
Protocol Version: 4.1.13.44
ExtROM Version: 3.13.405.102
I have tried to read how to upgrade from WM6 to WM6.5 or any other good ROM, but the more I read the more I get confused.
Please can someone give me a useful guideline on;
Where to get a WM6.5 or any other good, light and tested ROM (English Version)
How to flash a new ROM
I will be very grateful for any useful advice.
Thanks,
Jonat
jonat said:
Hello,
Firstly, I must say that I previously posted this thread on a wrong forum.
I am relatively new in this forum and also new in flashing a new ROM. I have a HTC p3300 with original WM6 which I bought some years back. So my PDA is open (not given by a telephone company).
Relevant Information
ROM Version: 3.13.405.1 WWE
ROM DATE: 8/28/07
Radio Version: 02.94.90
Protocol Version: 4.1.13.44
ExtROM Version: 3.13.405.102
I have tried to read how to upgrade from WM6 to WM6.5 or any other good ROM, but the more I read the more I get confused.
Please can someone give me a useful guideline on;
Where to get a WM6.5 or any other good, light and tested ROM (English Version)
How to flash a new ROM
I will be very grateful for any useful advice.
Thanks,
Jonat
Click to expand...
Click to collapse
Hi,
for the guide: link
can you try using the latest of Shady313, I haven't try it, but he is a good cook : link
Bye,
Silvio
tnw513 said:
Hi,
for the guide: link
can you try using the latest of Shady313, I haven't try it, but he is a good cook : link
Bye,
Silvio
Click to expand...
Click to collapse
Hello,
Thanks for your message. I tried to follow the procedure as stated in the USPL documentation but along the line, I got an error, " Error 260" No connection between my computer and my PDA. I got to the stage (interface) where I can flash a new version of USPL on my device then the error appeared. I had a good established connection between the two devices before the error appeared.
So, what can be the problem? I am using Windows Vista.
Regards,
Jonat
jonat said:
Hello,
Thanks for your message. I tried to follow the procedure as stated in the USPL documentation but along the line, I got an error, " Error 260" No connection between my computer and my PDA. I got to the stage (interface) where I can flash a new version of USPL on my device then the error appeared. I had a good established connection between the two devices before the error appeared.
So, what can be the problem? I am using Windows Vista.
Regards,
Jonat
Click to expand...
Click to collapse
the problem is probably Vista...
See that in that case: --> link
Bye,
Silvio