Database Users

stuck at "GSM OK" when updating

I upgraded my device (PW10B1, Wallaby 5.15) from PPC2002 to WM2003final downloaded from http://www.romkitchen.de, I used SD card type-1 and the writing completed successfully but after cold reset, Wallaby boot screen showed up again and stopped with "GSM OK" message and won't go any further. Please help, Thanks.

When you get GSM OK, you are in the bootloader.
Maybe a malware of your powerbutton....
if you just do a softreset, what happens without touching the powerbutton?
Stefan

actually I got the device in damaged condition from a friend, before upgraded it won't boot to windows, it was just keep displaying Wallaby boot screen with "GSM ERROR" message when turned on. After upgrade process and soft reset (with and without touching power button, the results are the same) Wallaby boot screen is still displayed but the message is "GSM OK". I'm thinking the same thing, the power button may be damaged somehow, I'll try to check that, I'll let you know what comes up. But is there any other possibility for the problem? Thank you very much Stefan.
Joyo

No, normaly not, btw. i do not know any possibility.
Stefan

power button
I tried to work on the power button, opened the device and take a good look at the switch, physically it looked just fine. Well, guess I just have to let that one go :? Thanks for the help Stefan.
Joyo

Hi thejoyo, have successful you recovered your wallaby? I have exact problem:
1. The device automatically enters bootloader 5.22, says GSM OK and then stop. Buttons dont work, except for two reset button.
2. Charge led (usually amber when charging) turn RED
3. I managed to flash the device by SD card method but did not success. When i put SD card into device and reset, it automatically flashed itself!!! Without my permission, didn't press OK button!!! It's very strange. Then it said that flash success, cold reboot. I press reset button and it enter bootloader again, like i have never flashed it.
I have tried many SD card, still no luck.
Should I try something else? Please suggest me what to do next!

BA not used for a long time, not stuck at boot screen

Hi guys,
I did not use my BA for a while and i turned it on recently after charging.
It is stuck on the Windows Mobile 6 Boot screen.
What can i do to get it out of that and go in to WM6?
Should I reflash the rom? My Computer doesnt detect the device though.
Thanks in advance for help
Kind regards,
Jason

Easyest way should be hard reset

did you try the two buttons on the left side + off/on at the same time ? - like you have to do immediately after flashing ?

ok ihave tried reseting from the pin hole from the bottom of phone and also tired resetting the bottom of the phone with the two left button held down.
all 3 options set to 'no' right?
still stuck at the windows screen.
more help will be appriciated

Refer to WIKI: KITL must be OFF, the other 2: ON.

This is wnat you need to do :
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners

cheers i got it to boot up again. i forgot to push the mail button to save changes and reboot.
thanks for the help, much appriciated.

Trinity stuck at hard reset

My Trinity is stuck at the hard reset screen where it says "Press SEND to restore factury default, press END to quit". I've tried to hard reset it as it told me to, but it's still stuck. I've also tried to flash it with a new ROM, but that's hard as it's unable to establish an activesync connection. Is there any way I can fix this myself ?

Tricky547 said:
My Trinity is stuck at the hard reset screen where it says "Press SEND to restore factury default, press END to quit". I've tried to hard reset it as it told me to, but it's still stuck. I've also tried to flash it with a new ROM, but that's hard as it's unable to establish an activesync connection. Is there any way I can fix this myself ?
Click to expand...
Click to collapse
Have you got to the multi coloured screen after doing the hard reset (Power button+Camera button+soft reset)? If yes then you should be able to plug your Trinity into the PC and flash a Rom.
I had a similar problem while trying to flash a new rom and this worked for me. You could also try removing the battery for more than 3 secs then powering up and attempting the above tasks. Best of luck, most of all don't give up and keep searching the forums.

No, it just went back to the hard reset screen again. But I found out, I placed the buttons wrong when I changed them, so the two softbuttons were pressed all the time. It's fixed now.

ANYONE PRO one can help ME plz...........
Why My HTC WIZARD Not Enough battery energy is it will stuck back at hard reset ??

[Q] Phone stuck on HTC screen?

My phone is stuck on the start-up HTC screen, the one with the green "HTC" logo non a white background.
I was just changing my font to "Cees Hand Regular" using Font Changer and it was not my first time using this application. Every font change requires a reboot, and when I did so my phone got stuck on the start-up screen.
I'm currently running the latest stable version of Cyangonmod if I'm not wrong, and my phone is still able to enter bootloader mode.
I've already tried Googling around for answers and there were some saying to reflash a new rom. But how can I do so if my phone is in such a state? I also tried pulling out the battery to cool and even cleared my memory.
Can someone help me with my problem? Any help or replies is very much appreciated!

If you can enter bootloader mode, you can enter recovery (Clockworkmod) and can flash a ROM again from there.
Enter bootloader, wait for the file scan to get over, then use the volume keys to navigate to RECOVERY, and press the Power Key. Phone will restart in Clockworkmod. Here, perform a wipe data / factory reset, format /system under Advanced, and re-flash the ROM again.

LG G2 Bricked Tried as many things on xda as I could find.

Hi Folks,
I had TWRP installed and updated cm11 with a new nightly. I did a wipe cache and restarted. Phone got stuck on the LG screen. I could not get into recovery after this. I then used the LG support tool and flashed using 'Upgrade Recovery' option.
Phone now is stuck on same LG boot screen but now LED flashes also.
Can anyone help? I am really stuck here guys. :crying:
Cheers,
Trev

Log seems to say it worked but still stuck on boot screen.

trevt said:
Log seems to say it worked but still stuck on boot screen.
Click to expand...
Click to collapse
Doesn't the hard reset combination get you into recovery?

trevt said:
Log seems to say it worked but still stuck on boot screen.
Click to expand...
Click to collapse
Did you select 3GQCT instead of CDMA which is selected by default ?

See if you can get into recovery once again.
Some tips: Hold power and down to make device restart, then let go... As soon you see the lg logo hold down and power. Timing is the key. There are sometimes I think I don't have recovery but in reality i do. Its all user error. If that don't work, try get in download mode. And flash zvc tot and get back to the stock.
Sent from my LG-LS980

Do a hard reset. it helped me yesterday. It's just that the hard reset key sequence for KK roms is different than how it was with JB. try to google it because I lost the topic.

stilkus said:
Do a hard reset. it helped me yesterday. It's just that the hard reset key sequence for KK roms is different than how it was with JB. try to google it because I lost the topic.
Click to expand...
Click to collapse
Hey,
I'm in the same case but the R&D soft say there is an error. Plus I can't acces the hard reset menu nor recovery...
I can't also see my device on recovery as I only see in the device manager : LGE Android Net USB Serial Port.
And this is like that when I try to boot or when I'm in download mode.. Any help would be great...
PS : I try to make a restore with the LG Mobile Support Tool (the true one) but will only get answer in 6hours (best connection ever!!)...
Edit1 : That worked! I get out of the download mode and let the software do is job and there is new! Now I have to put a pin /password but I don't know which one ^^' ... I've tried to go back in download mode or hard reset mode but it don't work..
Edit2 : I don't get how but I manage to get in download mode. After that I perform a restore to another kdz and now I'm using the factory reset which seems to take a lot of time..

Thanks for the replies folks. Got it sorted out. This seemed to be the only way to get it sorted :
http://forum.xda-developers.com/showthread.php?t=2687768
Massive thanks to member MK45A :good: