Related
I have the tomtom navigator 3 and a EMTAC bluetooth antenna and this works perfectly
My problem is that when I'am trying to employ other softwares like VITONAVIGATOR, GPSDASH ,INTELLIGOLF, and so on I cannot configure the softwares to recognize my antenna.
Kindest regards
@[email protected]
hi,
solution is simple...
sorry to say it, but uninstall TomTom GPS or better the whole TomTom and use Mapsonic or Mapopolis instead of it...
i did the same.
buzz
emtac
Yes of course but i already bought tomtom, is there any other solution?
Simple, in Remove Programs uninstall TomTom~GPS.
This won't prevent TomTom from working but will stop TomTom locking the BT Com Port for its own exclusive use.
Plenty of discussion of this on our website, see our detailed explanation here.
@griffog
man, that's an excellent guide there... really good one...
;o) basically i meant the same... ;o)))
but, tomtom needs also far more processing power than other comparable programs, that means battery drains 30% faster, slower UI response, etc.
i know, battery is not any issue if you are driving, but i sometimes walk as well... )))
anyway, i don't like tomtom...
do you maybe know, is it possible to do crossborder routing in newer tomtom versions? like you can in mapopolis?
THANX
buzz
It looks like TomTom v5 will do cross border-routing yes. I have never experienced slow response to the UI except when using SD for map storage on iPAQ2210's. Using CF resolves this.
v5 also introduces walking and cycling modes which alter the route calculations. What PDA/GPS/memory Card Combo do you use?
darren it our work around doesnt work for xda2
griffog said:
It looks like TomTom v5 will do cross border-routing yes. I have never experienced slow response to the UI except when using SD for map storage on iPAQ2210's. Using CF resolves this.
v5 also introduces walking and cycling modes which alter the route calculations. What PDA/GPS/memory Card Combo do you use?
Click to expand...
Click to collapse
hi griffog,
i'm using XDA2 + EMTAC BT + Mapsonic or Mapopolis.
Maps are on Transcend 64Mb SD card.
i'm very satisfied with this combination
buzz
just being playing with mine :lol: :shock: eerrrr right
first delete gps 2.07 or above then soft reset the device install pocket bluetooth tools delete the pairing with your receiver repair then ( during which you will be asked to create a serial port for this device select NO at this point then intall gps 2.06 available from www.pocketgpsworld.com this available in the downloads section under tomtom gps drivers.
download the cab file and copy it to the xda2 and then exicute it from file explorer select you reciver and away you go
well thats how i did it hopefully the above ramblings make sense :lol:
Alix, how will he configure the other gps software if no serial port has been assigned, I understand this works under tomtom as "bluetooth gps" but I am not so sure it will work with the software he mentions.unless you have tried it, if so how did you configure it.?
bluetooth tools asigns the comport to com7 not sure hows these thing work really it just worked for me i can run tomtom 3 and copoilt 5 on the same machine
considering getting tomtom5 for my mda compact.
anyone know whether its compatible, has anyone got it?
Should be. TomTom 3 and 4 worked fine.
By the way, Bakonl's release of TomTom 5 was just posted on alt.binaries.warez.pocketpc.gps, along with a few maps.
Benelux map only.. :x
TT5 does work
and not only benlux maps are posted. italy, france, germany, spain, uk are posted as well. rest will be posted as well i guess.
anyway, waiting for my legal TT5 to arrive (with the bt gps), woei =)
I can't get it working... I tried installing in the program files and in the storage card directories but it crashes at the end of the tutorial, just after that the "Welcome to TomTom Navigator" message appears in the map screen.
I can't see the map nor the GPS is able to connect (TomTom "3" Navigator Wireless).
I can't find any registry entry, I modified the currentmap.dat in order to point to /storage card/italia-map.
Anyone was able to reproduce my problem and to solve it?
Yeah, I noticed there are a few maps out. I'd like Scandinavia tho Seems like a buggy version too.. Crashes often.
Yeah... reeeeally buggy, I tried to check the post in the alt.warez.pocketpc.gps newsgroup for infos about bugs/problems etc. but I can't find it in my nssp server and using the web I'm not able to see the post (I can just see the header) so... I still can't use it :lol: ; maybe it could be a bad installer, I noticed that sometimes it won't install some cabs from the cd, or maybe it's just the italian map which is corrupt... who knows? 8)
I guess the release on alt.binaries is a preview or beta version.
The official release of Tomtom 5 will be end of June.
Im still waiting for Destinator PN on emule...
Where can i find the TomTom 5?
I have installed TomTom 5 to see if it works, I'm unable to connect my BlueTooth GPS (Holux GPSlim 236). The port does not show up on the device list under Buzz WM2005.
Does anybody know how to change this?
Ikkuh
I have installed TomTom 5 , I'm able to connect my BlueTooth GPS (Holux GPSlim 236) on port 4
work OK for me !!!
JesperR said:
Where can i find the TomTom 5?
Click to expand...
Click to collapse
www.tomtom.com
Stefan
bruxelles5 said:
I have installed TomTom 5 , I'm able to connect my BlueTooth GPS (Holux GPSlim 236) on port 4
work OK for me !!!
Click to expand...
Click to collapse
I had the same problem.... go to the bluetooth com ports, change the GSM to use COM8.
Then start -> settings -> gps, on the first tab set com4 and on the second tab tom com8. The thrid tab should have the checkbox set.
Now reset your device.
Start tomtom, goto your GSM setup, choose Other bluetooth, select COM4.
Now exit tomtom and reset your device.
Start tomtom and wait a while (can take a few minutes for it to find the GPS).
This worked for me (you need the resets in order to detect the com ports!!)
Ikkuh
@Ikkuh,
How can I change the Com port settings on my MDA Compact? I can't seem to understand you're solution. I need Com 8 and TT5 only has 2,4,5 and 9.
Thanks in advance!
dickr43 said:
@Ikkuh,
How can I change the Com port settings on my MDA Compact? I can't seem to understand you're solution. I need Com 8 and TT5 only has 2,4,5 and 9.
Thanks in advance!
Click to expand...
Click to collapse
There is a serial port multiplexer build in just for the GPS. It is under settings -> GPS, if you use this, you can create a virtual serial port, and attach it to the hardware GPS. If you do this and reset the device, the virtual GPS will show up in TomTom (in my case it did ;-) )
Ikkuh
I must admit dickr43 has got a point. Even though you are trying to be helpful, Ikkuh, it's a bit hard to understand.
Start tomtom, goto your GSM setup, choose Other bluetooth, select COM4.
Click to expand...
Click to collapse
There IS no GSM setup in TT. Most likely you mean GPS?
There is a serial port multiplexer build in just for the GPS. It is under settings -> GPS, if you use this, you can create a virtual serial port
Click to expand...
Click to collapse
Doesn't exist either. Must be some third party app you have installed...
dickr43,
Try removing your GPS pairing from the Magician. Go select the 'Bluetooth Setting' icon under Settings/System and make sure both the serial ports are activated. Note which COM port is 'Outbound', then re-pair with your GPS device. Start TT and in the GPS settings panel, you should get things running by selecting the COM port that was marked for Outbound.
Unless you are running some third party software with virtual BT COM ports, that should get you up and running. If you are, try each COM port one by one. Don't hurry through the ports, but give it time to connect. 5-10 seconds at least. Also make absolutely sure your GPS is within range and has a satellite fix, or you are wasting your time.
I cant use tomtom 5 as a route map
I just want to use it sometimes without the gps module is it possible. Because with the older version it was possible to select a GPS simulator.
THX :lol:
The "unofficial" versions of TomTom5 doing the rounds seem to have been taken from beta builds. I installed without any problems, but noticed a number of bugs (not recognising GPS, the program freezing, picking up wild GPS info, settings not sticking)... sometimes you'd think it was working, and you'd think you'd got it stable, but then they'd fall down.
I've tried 3 different versions doing the rounds right now and none of them are stable. I'll wait a month or so for a more finished release is available.
i got my hands on TT5 aswell, the program looks realy nice and lot improvement to TT3, but as mentioned above, it's not very stable, spontain exiting of TT5 is not cool when youre in the middle of no where.
my gps was recognized directley,
i just went to BT settings and checked Com5 and a messege apeared that i must bond with a compatible device, so i bonded with my GPS reciever and in the TT wizard i could chose Com5 and it connected right away, much easyer than TT3
regards.
Hi,
I am considering getting TOMTOM5 for my T-Mobile MDA Compact and would like to use this in my car. Does anyone know or can provide screen shots of what the display looks like? Is it easily readable while driving?
Thanks
Msuk
Hi all,
I recently purchased a P6500 and I installed Igo 8.When I enter the gps config menu it says that gps could not be found;if i hit the auto search button the device freezes.
I installed Port splitter 1.11 and I managed to gain something...the device doesn't freeze anymore but it still can not find the gps.I have no idea how to set up the com ports....the program port..the hardware port..I am confused...
(I also inst. Igo 2006 and works ok.)
I appreciate any help!!
Xman556 said:
Hi all,
I recently purchased a P6500 and I installed Igo 8.When I enter the gps config menu it says that gps could not be found;if i hit the auto search button the device freezes.
I installed Port splitter 1.11 and I managed to gain something...the device doesn't freeze anymore but it still can not find the gps.I have no idea how to set up the com ports....the program port..the hardware port..I am confused...
(I also inst. Igo 2006 and works ok.)
I appreciate any help!!
Click to expand...
Click to collapse
Hi, Xman -- I don't know this software and so probably can't really offer anything helpful. For what it's worth, the GPS seems to work fine on my P6500: both with Google Maps and with GPS-enabled photos on the HTC Camera app. Does your GPS work with those programs?
Sorry about your troubles!
Alan
I didn't try with Google maps because I'm interested in making Igo work .
At list tell me an app which can show me some info about the internal gps such as speed /the com port on which it's installed etc..
Thanks
Problem solved!!!!!!!
Solution? GPS Gate
I have also noticed the same problem running both IGO-2006 and I-GO 2008 on my 6500,on the other hand i have had no trouble whatsoever running Destinator 7 and Garmin ,i guess it's got something to do with the software and not the PPC itself which i must say has a very good GPS receiver.
Edit
Thanks for the GPS-gate idea.
Xman556 said:
Problem solved!!!!!!!
Solution? GPS Gate
Click to expand...
Click to collapse
Hey Xman556,
I've having the same problem with my HTC 6500.
Could you please be kind to tell me how to set up the gps gate so it well work ok with the iGo8.
Thank you
Gigino
Well I think I rejoiced too early.Today I took a longer trip and wanted to check how my new solution works......after catching speed the gps started disconnecting an reconnecting until I had to turn it off for good.So almost back to square one.....anybody who can help?
gigino said:
Hey Xman556,
I've having the same problem with my HTC 6500.
Could you please be kind to tell me how to set up the gps gate so it well work ok with the iGo8.
Thank you
Gigino
Click to expand...
Click to collapse
At input I selected WM GPS and after you hit open.
At output I have Gpsgate direct/virtual com2(all NMEA)/COM2/COM4
But as I said in my previous post...is not quite working.
Also you might check the franson's web site ..thy seem to have a nice support forum...if you find anything please share.
gigino said:
Hey Xman556,
I've having the same problem with my HTC 6500.
Could you please be kind to tell me how to set up the gps gate so it well work ok with the iGo8.
Thank you
Gigino
Click to expand...
Click to collapse
You mean that you have also problems with the Igo8?If yes do you have the original Igo or the cracked one?
Xman556 said:
You mean that you have also problems with the Igo8?If yes do you have the original Igo or the cracked one?
Click to expand...
Click to collapse
Hey Xman556,
it is a crack one at the moment untill I can get it to work properly then I'll buy it if not I'll just leave it.
The way I can get it to work is like this I start the iGo8 then I go to settings TMC and dp a search if return as no hardware fined then I go to GPS and put in the com port 4 and the speed 57800 and it work but if I do a soft rest the iGo8 well not work anymore until I change the GPS port in the PDA to a diffrent port like port 8 then the Igo8 well star and I have to do everything I did before go to TMC and so on if I try to go straight to the GPS without going to the TMC the system hang and I have to do a soft rest this is the way I got it working I'm using the version 4.1.506 if the Igo I tried the earlier version and it is the same problem I need a solution better than this.
Thank You
Gigino
As far as I see the problem is that the cracked Igo is not able to start the internal gps.
Here my new solution..this time is really working !!!
GPS TEST from chartcross...i start this program .it starts the gps then menu/minimize and after i start the igo.
Tell me if it works for u.
Xman556 said:
As far as I see the problem is that the cracked Igo is not able to start the internal gps.
Here my new solution..this time is really working !!!
GPS TEST from chartcross...i start this program .it starts the gps then menu/minimize and after i start the igo.
Tell me if it works for u.
Click to expand...
Click to collapse
Hey Xman556,
thank you for you suggestion it does work now it is much more easier after a soft rest.
Thank You
Gigino
I had this problem with I-go at first. When first installed selecting the gps port and or baud rate would lock the phone. Also if you did an auto detect it would also lock the phone. Solution, have gpsdash or google navigator running with the gps enabled (or anything else that works with the internal gps it seems). Without stopping the app start I-go and it will find and use the gps quite nicely.
Once it has done this the first time I never had to run anything else before I-go even after a reset. Tried this several times by fully reseting the 6500 and worked every time.
similar GPS problems with HTC P6500 and iGo
Hi all,
I'm writing from Germany and have similar problems with iGo 2006+ and iGo 8.
(I purchased iGo 8 just yesterday)
My (German) settings:
Settings --> System --> External GPS -->
Tab Program?:
COM4 for internal GPS, no external GPS via Bluetooth (see Attachment)
Tab Access?:
manage GPS automaticly: ON
What are your GPS settings?
- - -
What I have discovered:
- 1st starting iGo 2006+ and iGo8: both applications hang during 'starting'
- With Igo 2006+ I tried: 1st starting the app 'GPS Tuner', then starting iGo
--> It starts and iGo finds GPS on Com4 with maximum baud
(now I don' t have any longer 'GPS Tuner')
- With iGo8 I tried starting the freeware 'VisualGPSce' 1st (until GPS fix), then starting iGo8 --> It starts, I could set COM4, maximum baud...
--> so I think, is is an internal iGo/GPS-problem
- Today I could drive about 10 km with Igo8, then it crashes without any msg
You can see, I have similar probs, did u solve the probs meanwhile?
---
Rainer from Germany
cracked igo works fine on Sedna. from SD or InternalFlash.
I´m using GPSGATE.
Start GPSGATE, best automatically after reboot.
this will start the internal GPS.
Now you have 2 possibilities.
1. use the output port of GPSGATE, maybe Virtual Com1. You can select it in the options from GPSGATE
or
2. use Com4 from internal GPS. once startet from GPSGATE, it works.
you have to edit your sys.txt in folder programs....igo8
[gps]
port="1" or "4"
baud="38400"
it works definitly
Guenni
Latest news
After trying all kinds of programs(GPS port spliter,gps gate and gps test) I found that the solution with gpstest is the best.So I decided to perform a hard reset in order to install on my device only the useful software. But after the hard reset the gps would not start no matter what programs I installed. So I sent the device to HTC and they replaced the mainboard.
Now the IGO8 works perfect(together with GPSTEST-pls see my earlier posts).
GPS Text script
I too found GPSTest.exe useful because its really small.
Strange that iGo hangs when trying to communicate over the port *unless* you start another program and open up the GPS unit's port.
Sounds a lot like PPC/iGo GPS management issue.
Be that as it may, I created a script with MortScript, and then put this shortcut under my programs in "\Windows\Start Menu\Programs" on my PPC (I'm running WM 6.1 if you care).
The following script opens GPSTest.exe, launches iGo, then closes GPSText.exe after iGo shuts down;
iGoLaunch.mscr:
Code:
#OPEN GpsText.exe minimized
Run ("\Storage Card\Program Files\Chartcross\GPSTest\Bin\GPSTest.exe")
WaitForActive ("GPS Test", 5000)
Minimize ("GPS Test")
#Run (and wait until iGo closes)
RunWait ("\Program Files\iGO8\iGO8.exe")
#Close GpsText.exe
Kill ("\Storage Card\Program Files\Chartcross\GPSTest\Bin\GPSTest.exe")
After creating iGoLaunch.mscr, put this link (use notepad) into "\Windows\Start Menu\Programs"
iGo 8 GPS.lnk:
Code:
1#"\Storage Card\iGo8\iGoLaunch.mscr"?\Program Files\iGO8\iGO8.exe, -101
Please note: If you decide to use this script and shortcut, I highly suggest you check the paths/filenames for accuracy.
GPS and WM 6.1 upgrade
Hey guys -- this may well not be relevant to the issues you're dealing with -- I don't use iGo -- but there is a HUGE improvement in GPS reception with the Windows Mobile 6.1 upgrade. My Sedna used to have a very difficult time getting GPS reception: it often could not find a signal despite repeated attempts. But since the upgrade, it's been locking on quickly and consistently.
Thought I'd pass this on in case it's helpful.
Alan
very simple script
once the GPS is initialized for the first time it will work
I've wrote a script for MortScript. The only code is:
WriteFile( "COM4:",x )
This script only sends something (here x) to COM4.
Then COM4 is used for the first time and will keep on working.
I start this script in autostart.
That's all.
Please regard uppercase and colons when writing "COM4:"
Bye
Guenni
Solution for port splitter
You can use port splitter for your gps. here is the process i went through with my HTC (jade). first i used gps gate and figured out that the internal gps is using com4. since gpsgate is not free and had to stop using it I tried port splitter
simply install port splitter on your pda
under INPUT-> PORT: com4 and Baud: 4800 (you might have to type COM4 yourself)
under OUTPUT-> select com1 on the drop down menu and press ADD
then press Start Splitter
and it should work
if not install gpsgate and figure out what port it is using and than use port splitter.
This should save you some money
Greetings
Macula
Is there any way to get TomTom 5 to see the internal GPS using the Valhalla cab? Someone told me that Valhalla cab generates the GPS signal on a virtural port and that TomTom 5 cannot read a virtual port -- or something like that. If accurate, is there a work a round? Google and Live read the GPS so I know it works. TomTom 5 works fine with my bluetooth GPS receiver, so I know the software is working -- but it will not see the internal GPS. Will TomTom 6 work with this configuration? Thanks in advance for your help.
Roger
I'm not sure if this will help or not but I'm using IGuidance and it doesn't/didn't work with the Valhalla cab by itself. The Iguidance program did work fine with my I-Trek M5+ bluetooth receiver in much the same same situation you're in now.
What helped me was to install Fransons GPS Gate software (it's a paid program but there are some free one's out there like it). I set Fransons to use the WM GPS option and then open up I -Guidance and it works fine (this freed me up from having to use the I-Trek reciever).
Hopefully something like this will help.
Good luck.
Now I got my X2...! Trying to use my TomTom as before on my X1, but on this X2 TT cannot see the GPS.
I have another GPS Sportprogram and that works fine. Just TT does not see it. Is there any reg entry perhaps?
Thanks
That is how:
Since it seems nobody here care to answer questions, I found it and will share for all those who also want to know:
Go to settings, External GPS, select i.e. ComPort 4
Go back into TT and select Other MNEA Receiver and there will be now port 4, click it and voila. Super Fast GPS in TomTom!
Hope that helped. It helped me