Hello everybody.
Whenever I install a .cab from my miniSD card it dissapears from the miniSD card. Why is this? Is there any solution?
Thanks in advance.
Thats what WM does. It will remove the original CAB files once you have installed it. To solve this, copy a backup of the CAB file before installing.
Ot make a CAB not delete after running it. copy the file to your SD via your PC and then right click on the file and make it Read only.
Once read only the file will not be delete after being run.
hanmin said:
Thats what WM does. It will remove the original CAB files once you have installed it. To solve this, copy a backup of the CAB file before installing.
Click to expand...
Click to collapse
Or just set the file properties to read only using TotalCommander /GSFinder etc. That way you can keep them all on your SD card in case you need to reinstall away from your PC.
bryanz, click on cabinstl.exe. check the option <Do not delete cab file>. The default is unchecked (blank). This solves ur problem
Hi blogg buster, in what folder is that file?
Thanks for all your replies.
bryanz said:
Hi blogg buster, in what folder is that file?
Thanks for all your replies.
Click to expand...
Click to collapse
cabinstl is a freeware program for WM2003 which lets you to choose whether to install the application to main memory or SD card, (which WM5/AS4 now does itself), and the option to keep the cab, which you can do anyway by setting the RO attribute. So IMHO it's not really needed on the Wizard.
OK, thanks a lot Ineedtoys
Ineedtoys, I think bryanz may be right but from what I gather u are running smthing which looks like cabinstaller. Check from Start>program to see whether u have cab installer. if not, then discard my suggestion. Another way is to use the FIND option from ur file explorer to find "cabinstl.exe" .
Good luck
This little cab will stop all cabs installed after it from being deleted, although it will delete after you use it. It probably is the same as putting a check mark in the cabinstl.exe program.
blogg buster said:
Ineedtoys, I think bryanz may be right but from what I gather u are running smthing which looks like cabinstaller. Check from Start>program to see whether u have cab installer. if not, then discard my suggestion. Another way is to use the FIND option from ur file explorer to find "cabinstl.exe" .
Good luck
Click to expand...
Click to collapse
The only file I can find on my WM5 and 2003SE machines is a cabinstl.dll in ROM, which cannot be run directly. So if you have a "cabinstl.exe", you must have installed the freeware add-on?
Which is largely redundant in WM5 anyway, apart from letting you see or extract the contents of the cab prior to installation.
guttrhead said:
This little cab will stop all cabs installed after it from being deleted, although it will delete after you use it. It probably is the same as putting a check mark in the cabinstl.exe program.
Click to expand...
Click to collapse
I have posted on other forums the reverse issue for some people with other WM5 devices.
Kevin Tofel and James Kendrick of MobileTechRoundup have mentioned that on their WM5 phones - Verizon 6700 and Treo 700w, that any installation .cab files that they install are not deleted after the app is installed. I wonder if the above little cab (or something like it) has been installed on some OEM devices.
Any ideas how to reverse this and have the cab deleted for those that don't have the functionality.
There's actually a registry setting that controls this. Here's a quote from a registry tweak thread on Treo Central exlaining how:
Make WM5 keep CAB files around after installing (1)
If you wish to keep the original .CAB file around after installing the application, set:
HKLM\Software\apps\Microsoft Application Installer\nDynamicDelete = 0 (DWORD decimal)
Or to restore to the default:
HKLM\Software\apps\Microsoft Application Installer\nDynamicDelete = 2 (DWORD decimal)
Make WM5 keep CAB files around after installing (2)
An alternative method of making WM5 keep the original .CAB file around after installing the application is by adding the "/nodelete" option to the Windows CE loader:
HKCR\cabfile\Shell\open\command = 'wceload.exe "%1" /nodelete' (REG_SZ string, no quotes)
I trialed a 700w for a while and noticed that it would delete cabs installed from main memory but not from SD. I'm wondering if nDynamicDelete = 1 sets this behavior.
Related
I just hard reset my magician. Since i'm using big storage (my friend did it), only some of the cab files from extended_rom are installed. Now i just found out that my smart dialing, MMS, O2 plus are not included. It was easy to recover those programs since i know the cab files.
However, i cant find the right cab for "Running Programs". Does anyone know which one? Thx.
Sorry for the bad language
Running programs - do you mean in Settings > system > memory > running programs?
If you need a task killer I can send you one or there's many around.
V
That's the one. Thx . So actually it's not a stand-alone program. Yes i found the running programs.
So, the question is changed now. I need the shortcut to that program. Usually magician has the blue box icon with a picture of someone running. Do you know the shortcut?
Thx.
Just tried to restore that icon from my old backup before it crashed. I thought it was just only a link to some program. But it is not! It is an exe file and after i restored it, click the Running Programs, it says "Error opening the shortcut or locating the target filename".
Any clues?
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
What does that file do? Just open up the running programs control panel?
If you need it back, just type the following into a text file on your PPC
Code:
22#ctlpnl cplmain.cpl,4,2
and save it as Memory.lnk
Then double click on that file.
Tell me if it works ok.
V
@vijay
i just wanna return my magician to the default system . that's why i'm so curious to get back that program.
@ampda
i'll try that file. thx for the info.
I can post my CAB file but it will also add the O2 xda defaults that can with the Aussie unit
ampda said:
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
Click to expand...
Click to collapse
Thats right....just install that cab file "default_103133.cab" and you will have your Running Programs app back....that is, if you saved your Ext ROM files before doing the Big Storage patch, or someone can attach that cab file here.
Now my problem is (sorry this might be Off-topic) , how can I have back the AUTOCONFIG for different Telcos, (especially Asian) ? Its also gone after the Big Storage patch. I dont know which of the cab files I need to have it back
anyone have idea or is there a forum for this in Magician?
thanks...
THANK YOU!!! finally i can access my running programs.
anyway, ive another question . let's say i want that program to be installed automatically after I hard reset. how can you do that? so i do not have to restore them manually from my sd card. thx.
dinoalbert said:
ampda said:
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
Click to expand...
Click to collapse
Thats right....just install that cab file "default_103133.cab" and you will have your Running Programs app back....that is, if you saved your Ext ROM files before doing the Big Storage patch, or someone can attach that cab file here.
Now my problem is (sorry this might be Off-topic) , how can I have back the AUTOCONFIG for different Telcos, (especially Asian) ? Its also gone after the Big Storage patch. I dont know which of the cab files I need to have it back
anyone have idea or is there a forum for this in Magician?
thanks...
Click to expand...
Click to collapse
To get the menu and icon run O2Auto.sa.CAB, then install the telco(s) you want to be in the autoconfiq menu.
@nsriza, thanks!!! As simple as this, and I can have my Autoconfig back already?
I thought I need to manually edit the autoconfig.txt to change the paths of the cab files?
Btw, I have already installed the cab files for all the Telcos that I need....but not the O2Auto.sa.CAB yet. Is it okay if I install that O2Auto then install again the Telco cabs?
Thanks...
So has anyone knew how to setup auto installation for cab files (eg. MMS, SmartDialing etc) after hard reset? thx
another OOT question...what does autoconfig.txt and config.txt do? and how to use it?
thx
Im assuming your asking for auto installation for after a hard reset using big storage. if you search for "AutoRUn" on this forum you should find a link on how to create an autorun folder on your storage card. you need the autorun.exe (Found in the search for the link) and a folder called 2577 created in the root directory of your storage card. then all you need to do is add all the CABs that you want to auto install after a HR to a ZIP (not Rar) archive and call that archive extROM.zip. then put that in your 2577 directory and hardreset and it will install all the files in the zip. if you havent already installed the cabs you put in the zip it will actually start installing them as soon as you insert the SD card. have a search around you will find lots of info about this subject.
SpeedN
@Speedn
thx for the suggestion. it's very helpful.
@rockafeller
hi i used big storage to convert my german rom (o2 xda mini) to wwe 1.12. now i lost some features like MMS,Smart dialling, Home zone control, O2plus. (as it was the case with you). It would be great if you could share here how did you get them back to work? i mean, i want the procedure to do so. i have a backup of my german rom.
one more question. i dont see the Phone pad option in my text input list after the bigstorage patch. how can i get it back. any suggestions would be so great..
thanx in advance
kk
@visvaram
if you backup ur extended_ROM, u should able to find related cab files, such as MMS**.cab, SMARTDIALING**.cab. Just tap those files and it will be installed automatically. FYI, backup ur cab files first b4 installing.
Im not sure about O2plus and zone files. Anyone care to help?
Hello All,
Is there a way to strip an installed application from a PPC into an installable .CAB file, if one has lost the installation files/DVD, but still have the application installed on the hand-held.
Thanks in Advance.
Not really.
You can always copy the files out (if you can find them all - some may be in windows folder or places other then the main app folder) but you still would need to know every registry key the app requires.
If you use sktools it tells you all the files installed and registry entries. You could then extract all the files as levenum said and make a cab including the registry entries.
Hi lev
ahh..hhaa !
meschle said:
If you use sktools it tells you all the files installed and registry entries. You could then extract all the files as levenum said and make a cab including the registry entries.
Hi lev
Click to expand...
Click to collapse
My experience with SKTools makes me cringe...my ATRE would not stop rebooting until I remove the SD card(where SK Tool was installed and remove it completely.
What software do I need to make a .cab file ?
I will still make all efforts to attempt this anyways....
Ive had no problem with sktools - i always install to main memory. If you manually make your cab then use cabiwiz - or use a commercial app like wince cab manager. Which program are you trying to put together?
cabiwiz enclosed inc example app and tutorials
Funny thing - I was replying to another thread with similar question stating that there would be a problem finding out all the REG keys.
Then jackleung posted about a tool called "ssnap" that supposedly can take an image of the system.
Comparing an image from before and after installation should show all the changes a cab makes.
Since I am not personally familiar with the tool I can't say any more about it.
As for cab creation - while I use cabwiz my self, it is a command line tool and you need to know ho w to write inf files for it.
For a beginner an app like WinCE cab manager will be more comfortable.
It is a shareware, so it will stop working after a while unless you pay but it is very good.
P.S.
Hi Mark
Hi Guys
Is there anybody who can guide me if it is possible to replace the Ext_Rom of a WM6 with WM5 or not?!!!
Actually I had a problem with my Ext_Rom...(There's a CLEARVUE...a default program for Reading PDF files which I hate it,but I can't prevent it of being installed while costumization of WM5 ) So I wondered If I can change My Ext_Rom with the one whcih has not Clearvue inside?
If yes,then how???
Thanks
Easy.
Go to the WiKi and search for "unlocking extended ROM of Prophet".
The extended ROM is just a collection of cabs. On the Prophet (at least in WM 5 not sure if they changed it in WM 6) you can open it with a simple registry change and then manually delete or add cabs. (note that cabs must be signed to automatically install after hard reset)
I looked over the backup of my Ext_ROM (from official i-mate ROM) but could not determine which cab installs ClearView just by their names.
You could always try them manually one by one or use CECabManager (google) to see whats inside.
levenum said:
Easy.
Go to the WiKi and search for "unlocking extended ROM of Prophet".
The extended ROM is just a collection of cabs. On the Prophet (at least in WM 5 not sure if they changed it in WM 6) you can open it with a simple registry change and then manually delete or add cabs. (note that cabs must be signed to automatically install after hard reset)
I looked over the backup of my Ext_ROM (from official i-mate ROM) but could not determine which cab installs ClearView just by their names.
You could always try them manually one by one or use CECabManager (google) to see whats inside.
Click to expand...
Click to collapse
Hi Levenum
It's really great to have someone to help you,finally.Thanks a lot,man .Actually I know how to un-hide the Ext_Rom,but the problem is that I can't find the cab that is installing this damn Clearvue program
I'm looking for someone who guide me which Cab is responsible for that(Gives me the name of the cab.file)...or....Any hero who guide me is it possible for me to change my current Ext_Rom with the another one that is not included that damn CLEARVUE???!!!
Thank you again for helping
Heloooooooooooooo
Isn't there anybody who direct me (and many others who have got the similar problem) by just saying how we can get rid of CLEARVUE in the Ext_Rom or at least replacing it with ACROBAR READER?
I already know how to un-hide AND Unlock the extended rom...
I need only the name of the cab file (which installs CLEARVUE),...nothing more...
It's NOT installed in the ExtROM, it's installed in the "base"ROM.
Black-Rose said:
It's NOT installed in the ExtROM, it's installed in the "base"ROM.
Click to expand...
Click to collapse
Hi Black Rose
I don't care where this damn software is,and I'm not gonna debate you over it...You just tell me what s the name of the cab.file...And if you are so sure about the location,so tell me also the place of it(Base or Ext-Rom?? )
Thanks anyway
I think clearvue is pre-installed in the base ROM, so there is no cab file to delete.
For me, I just ignore that clearvue or adobe LE is there. I just went ahead and installed Adobe 2.0 and everytime I tap a pdf file, adobe 2.0 opens.
If that doesn't work for you, you can use resco explorer to assign which default prog to open any file... similar to "open with" in XP or Vista.
Putra said:
I think clearvue is pre-installed in the base ROM, so there is no cab file to delete.
For me, I just ignore that clearvue or adobe LE is there. I just went ahead and installed Adobe 2.0 and everytime I tap a pdf file, adobe 2.0 opens.
If that doesn't work for you, you can use resco explorer to assign which default prog to open any file... similar to "open with" in XP or Vista.
Click to expand...
Click to collapse
Hi Putra
Are you sure it's not in the Ext_Rom?Because after a hard reset,whenever I prevent the Ext_Rom of customizing my device (Stop customization),I don't have the CLEARVUE installed on my mobile.
This is why I think it must be somewhere in Ext_Rom.Even some excerpts told me that I have to replace my Ext-Rom with the one which doesn't have CLEARVUE...But he didn't tell me exactly how I can find such a extended Rom and how I can do the replacement...I also needed to know if the replacement may damage the Original Rom of my device or not?
Thanks for helping me, anyway and I would be more appreciated if you help me a little more in that.
Ok, in that case, then it should be in your extrom. However, I also do not know which is the cab file. One way is to prevent the extrom customization, and then manually install each cab from the extrom....
Why don't you just leave clearvue in your device, and simply install adobe 2.0? I don't think clearvue takes that much space...
you can edit the ext_ rom by editing the folder content in WM6
I recomend to use winimage to edit extrom, it will lock the ext rom
Putra said:
Ok, in that case, then it should be in your extrom. However, I also do not know which is the cab file. One way is to prevent the extrom customization, and then manually install each cab from the extrom....
Why don't you just leave clearvue in your device, and simply install adobe 2.0? I don't think clearvue takes that much space...
Click to expand...
Click to collapse
Hi again Putra
Thanks again for trying to help me solving this slight problem.You are right About the space that CLEARVUE takes,but I don't want to see in the list of my programs...I want to get rid of it thoroghly...So pleeeeeeeeeeeaseee help meeeeeeeee..... And show me the way to completely erase it from my device!!!!!!!!!
Chopin said:
you can edit the ext_ rom by editing the folder content in WM6
I recomend to use winimage to edit extrom, it will lock the ext rom
Click to expand...
Click to collapse
HI Chopin
Thanks a lot for helping me to solve this problem,but wou,d you pease elaborate a little bit more...After all,I'm a newbie!!!!!
Just tell me what's this WINIMAGE and also tell me if I would be able to find the cab file of CLEARVUE within my Ext_Rom to erase it or not?!?!
Thanks again
winimage to use with extension.nb, as anewbie let forget how to use this one. if you need to kow, use search you;ll find a lot about how to use this one.
just look in the folder and remove it, or just edit the file Config.txt and remove the cab you don;t wanna install, it is so easy and don't need any clarification.
tell me what ROM do you use
Chopin said:
you can edit the ext_ rom by editing the folder content in WM6
I recomend to use winimage to edit extrom, it will lock the ext rom
Click to expand...
Click to collapse
OFF TOPIC: Hi Chopin, can you explain how I can edit the contents of the extrom on WM6?
edit the files. delete any cab you want and instert anycab you want in the folder, but if you add a cab file then edit the file config.txt and and enter the cab file in it
Chopin said:
edit the files. delete any cab you want and instert anycab you want in the folder, but if you add a cab file then edit the file config.txt and and enter the cab file in it
Click to expand...
Click to collapse
Oops, I meant how do I unlock and unhide the extrom in WM6. What prog do I use?
The last time I tried using WM5 tools on PdaViet 01, it didn't work. I have not tried again. I'm on Gullum v6, btw.
if this is what you want here is the files for unlock, and please ask me more if this was not what u needed
Ok, thanx. I'll try them...
Stop off-topics...let's talk about main topic
Hi dear friends
I noticed that we have been a little been off-topic,so I wanted to recall that we are here to help each other to find a way for "HOW WE CAN DELETE ANY CAB(In my case...CLEARVUE's cab file)INSIDE THE EXT_ROM OR CHANGE IT WITH ANOTHER CAB(Again in my case changing default CLEARVUE with ADOBE ACROBAT)?????
My friends
I even checked the Config.text file within my Ext_Rom,but unfortunately even there was no name and trace of CLEARVUE?!?!!??But I' sure it must be there...since when I stop my device of being costumized after a hard reset,I never see this CLEARVUE in my programs...So that means it must be somewhere in Ext-Rom..Somebody...Some hero....some know-all tell me where?????And under what name?!?!??!??!??!?!?
please, we already answer this question, to help you more, what ROM do you use?
1. Unzip the Disable Cube.zip and copy the folder Disable Cube in storage card.
2. With resco explorer copy the four exe files from the folder Empty Files in windows folder.
3. With a registry editor in HKLM\Software\OEM\TFLOSettings change EnableCube from 1 in 0 and make a soft reset.
The cube will not function anymore and you will have an extra 6,5 mb memory program memory available.
Attention: After you replace the original files, programs like SKTools and MemMaid may show the files "useless" and prompt you to delete them. DO NOT delete those files. If you do delete them by mistake then just restore the files as described in step 2.
In the Real files folder you can find the original files in order to come back whenever you want. Just copy in windows folder and change again the value in registry.
cannot overwrite, it said all files is read-only.......
Τry with resco explorer.
Finally I got rid of this useless cube, and I have more 7MB to RAM.
Nice finding man, Thanks!
panosha said:
Τry with resco explorer.
Click to expand...
Click to collapse
i'm using resco file explorer, it said "File storage space is full or read only."
and also i can't change those file to not read-only at the properties.
abit said:
...i can't change those file to not read-only at the properties.
Click to expand...
Click to collapse
Do not do this, you should only make what I describe in first post.
panosha said:
Do not do this, you should only make what I describe in first post.
Click to expand...
Click to collapse
yes, i did it now, sorry about confuse your description, many thx!!
re-enabling is just following the opposite?
Yes my friend.
Wow worked like a charm, THAnk U Very Very much
6.8 MB free and get rid og the Cube
Weird. On my Touch, with a custom ROM I built that hasn't biotouch.exe and other cube resources, that means I would have 7MB more free RAM compared to a ROM on which it's present and active. Yet it's (definitely!) not the case.
Believe me I wish it would be the case
zeflash said:
Weird. On my Touch, with a custom ROM I built that hasn't biotouch.exe and other cube resources, that means I would have 7MB more free RAM compared to a ROM on which it's present and active. Yet it's (definitely!) not the case.
Believe me I wish it would be the case
Click to expand...
Click to collapse
I did win about 2-3 MB on the normal low-memory Elf.
Thanks for this solution !
Tanx, works like a charm!!
Nice and it works, but a big Problem (HTC touch cruise, WM 6.0):
When i make a sidescroll in emails or sms i get an error message, something like "couldn`t open biotouch.exe". Any solution ?
With a registry editor in HKLM\Software\OEM\TFLOSettings change EnableCube from 1 in 0 and make a soft reset.
Did you have made this?
bluemetalaxe said:
Nice and it works, but a big Problem (HTC touch cruise, WM 6.0):
When i make a sidescroll in emails or sms i get an error message, something like "couldn`t open biotouch.exe". Any solution ?
Click to expand...
Click to collapse
Copy real biotouch.exe back to \Windows
Buck71 said:
Copy real biotouch.exe back to \Windows
Click to expand...
Click to collapse
.................Why ?
i know you guys said this will give you more access to ram, but does removing the cube speed up the device at all (noticeably?)
i wish HTC would have just had an option to disable it in the system settings.
oh well.
Maybe someone will make a software that can do this automatically for us?
To complete and correct this error try this:
With a registry editor in HKLM\Software\OEM\TFLOSettings change EnableScroll from 1 in 0 and make a soft reset
There is a similar metod to disable HTC Home?
Hi
I using i-mate Jam
Whenever I try to install a cab file I dont get option of saving the program on sd card or on phone memory.
How can it be fixed?
Looking forward to your help
Regards
you can try WinCE CAB Manager for that, it's an amazing program to edit cab's, and allows me to even relocate some DLL's files off \Windows folder.
Beware that some cab's dont like to be relocated, however it's great to save some precious space on wm2003 devices.
Thanks iRiKi
I have found out that after installation, I can use Pocket Mechanic to move any program from Main memory to Storage Card Its a pretty handy application!
you can try these registry hacks. they work on my O2 XDA II Mini
Ask where to install CAB
HKEY_LOCAL_MACHINE/software/Apps/Microsoft Application installer
'fAskDest' DWORD to 1 (DEC).
--------------------------------------------------------------------------------
Dont delete CAB files after install
HKEY_LOCAL_MACHINE/software/Apps/Microsoft Application installer
'nDynamicDelete' DWORD to 0 (DEC)
--------------------------------------------------------------------------------
guess i quite didn't understand the first post correctly..
what you want is CabInstl:
http://freewareppc.com/utilities/cabinstl.shtml
it's the very first thing i run after hard-resets