Related
Hi guys i have dopod u1000 the battery life is realy good and im charging it every 2 days but unfortunatly when the battery got empty i want to recharge it will takes about 8 hours to get full charge!!!!! yes almost 8 hour for full charge. this is realy bad for someone if realy want to carry this thing everythime to everywhere because if the battery got empty then you have to sit at hoe for 8 hour for full charge or got second phone when the dopod u1000 battery got empty swuch the sim card to the senderly phone when you put you dopod to charging. now this is the question i have . i need a external battey charger i mean put your second battery sepratley to he device and charge by itself as you know the other pda hav ethis kind of charge it have battery slot place you put battery on it and it will charge automaticly. now i want to know do you guys know where can i find such external batterycharger for my dopod u1000 ? let me know
Try charginf battery with the display Off
How about charging it every night when you are going to sleep?
In any case, turn off WiFi, LCD, GPS, bluetooth and any other data connections while not using it.
If you charge using the supplied USB cable, be sure to set the LCD brightness to minimum for a much faster charge.
It is much better to charge battery over travel charger, it must be just few hours for full charge
Are you, by any chance, charging the unit with a computer?
Are you, by any chance, charging the unit with a computer?
yes im charging my dopod by my computer. is it diffrense if i charge the dopod u1000 by computer usb or home wall charger? and my computer usb is 1.1 version not the 2.0 version doese it have diffrense? let me know which one will charge faster home wall charger or pc usb. and doese anyone know where can i find external battery charger? let me know guys.
thank you
emilnaeri said:
yes im charging my dopod by my computer. is it diffrense if i charge the dopod u1000 by computer usb or home wall charger? and my computer usb is 1.1 version not the 2.0 version doese it have diffrense? let me know which one will charge faster home wall charger or pc usb. and doese anyone know where can i find external battery charger? let me know guys.
thank you
Click to expand...
Click to collapse
There is a significant difference in charging with the supplied wall charger compared to the USB cable. Just use the wall charger and your charge times will drop to about 3 hours from 10% battery to full charge.
If you have lost the wall charger, be sure to set the LCD brightness to minimum while charging through USB.
emilnaeri said:
yes im charging my dopod by my computer. is it diffrense if i charge the dopod u1000 by computer usb or home wall charger? and my computer usb is 1.1 version not the 2.0 version doese it have diffrense? let me know which one will charge faster home wall charger or pc usb. and doese anyone know where can i find external battery charger? let me know guys.
thank you
Click to expand...
Click to collapse
Don't use USB for charging if you have a wallcharger at hand....it takes way too long!!
Wallcharger on empty battery 2 Full charge takes about 2 hours.
2 hour full charge with wall charger wow!!! i was thinking usb charger will be faster. and my other question is should i use my original dopod wall charger or other wall charger is fine? let me know
emilnaeri said:
2 hour full charge with wall charger wow!!! i was thinking usb charger will be faster. and my other question is should i use my original dopod wall charger or other wall charger is fine? let me know
Click to expand...
Click to collapse
Of course the original charger is the best to use.
If you do not have the original charger, find a charger that outputs 5V and 1A.
Charging via USB seems to be a MS Windows Mobile issue, not necessarily an Anthena problem. Since WM5 Aku 3, most devices have issues charging over USB..
Calavaro said:
Of course the original charger is the best to use.
If you do not have the original charger, find a charger that outputs 5V and 1A.
Click to expand...
Click to collapse
thank you i will try it tomorrow . you dont know friend charging with usb it tooks me almost 8-9 hour to get full charge. thanks for your advise i will use wallcharge. and do you know or anybody where can i find external battery charger because i want to get extra battery when the main battery got empty then i can switch to senderly battery. do you know where can i find second battery charger?
emilnaeri said:
thank you i will try it tomorrow . you dont know friend charging with usb it tooks me almost 8-9 hour to get full charge. thanks for your advise i will use wallcharge. and do you know or anybody where can i find external battery charger because i want to get extra battery when the main battery got empty then i can switch to senderly battery. do you know where can i find second battery charger?
Click to expand...
Click to collapse
Let's hope someone invents a docking cradle with this facility like the old HP PPC's.
emilnaeri said:
thank you i will try it tomorrow . you dont know friend charging with usb it tooks me almost 8-9 hour to get full charge. thanks for your advise i will use wallcharge. and do you know or anybody where can i find external battery charger because i want to get extra battery when the main battery got empty then i can switch to senderly battery. do you know where can i find second battery charger?
Click to expand...
Click to collapse
After using U1000 for almost a month now, I don't feel that the battery life is any better than my Universal. If it's better, perhaps, a little bit better.
I've left my JAMin for a month and now I can not turn it on.Any ideas? Why the battery is not charging? I think I'm going insane Do I have to buy a new battery? PLEASE HELP ME
If you are trying to charge using usb from computer or other source it probably won't revive a really discharged phone.
Instead you need to use the wall charger, leave it plugged in overnight then check the phone out.
Mike
Batt Charging is controlled by the OS/ROM, so if the batt is completely dead the phone in all probability not charge it.
You may not need to buy a new Batt if you can find a seperate batt. charging unit....
Else, a new batterry.
10x guys.I hope I will charge it today Hope dies last
happen to me before, if you can't charge it up, you either have buy a standalone battery charger from ebay or just postive & negative to boose a charge into the battery (for pros only)
Okay. So I want to buy a minimum of one 1600 mah extended battery (in addition to the O.E.M. battery which came with it) for my Tilt, but I need a way to charge it at the same time as the other battery that will be installed in my Tilt. I have seen at least a couple of third-party cradles / docks (they struck me as cheap / poorly made) that do have a charging slot for said additional battery in addition to the connector for the bottom of the tilt, so yes they will both charge at the same time. Here's the problem: I bought seidio's slim rubberized case for my tilt, & I'm unaware of any other cradle / dock that will fit the Tilt with that case on it besides the InnoDock cradles that are on their website, & those do not have a charging slot for an additional battery.
So, do any of you guys know how I can charge an additional battery?
Are you guys aware of any other options available to me besides purchasing one of those cheap-looking third-party docks / cradles with the charging slot for an additional battery?
That would mean I would have a dual dock / cradle charging solution.
I hope there are other options.
Thanks in advance for your help, guys.
So i have this original n7100 battery that i want to find a use for, and my gf has a low budget samsung phone(and i have a spare charger for her phone) that is always out of battery, and i was thinking if i could just cut the cord of the charger and connect to the spare battery, the output of the charger is 4.75v 0.55A, the spare battery is 3.8v 3.8A, her phone battery is 3.7v and 0.7A
Is it possible or would it be easyer to just mod her phone to use the spare battery to act as the main power source? Then would it be possible to get a transistor to act as battery switcher so she could just unplug the spare battery (i would just create a connection port on her phone)
Saturday night and i can't go out so i really need a project
n7100
kubbur87 said:
So i have this original n7100 battery that i want to find a use for, and my gf has a low budget samsung phone(and i have a spare charger for her phone) that is always out of battery, and i was thinking if i could just cut the cord of the charger and connect to the spare battery, the output of the charger is 4.75v 0.55A, the spare battery is 3.8v 3.8A, her phone battery is 3.7v and 0.7A
Is it possible or would it be easyer to just mod her phone to use the spare battery to act as the main power source? Then would it be possible to get a transistor to act as battery switcher so she could just unplug the spare battery (i would just create a connection port on her phone)
Saturday night and i can't go out so i really need a project
n7100
Click to expand...
Click to collapse
sory, that text is a little bit confusing for me, but you have to check correct volateg and amparage, lowering voltage and amp, is easy, the reverse is a little harder.
try this way
hi,
use otg adapter and connect to the note. then take charge/data cable and connect the cable to the adapter and the other end with yours girlfriend phone. under 5V there is no worry. maybe you unplugg your phone and there ´s still the charge sign. then u have to restart your phone. but i dont think that will happen.
cheers
:laugh: Maybe Your Rom make Pin drain so fast
kubbur87 said:
Is it possible or would it be easyer to just mod her phone to use the spare battery to act as the main power source? Then would it be possible to get a transistor to act as battery switcher so she could just unplug the spare battery (i would just create a connection port on her phone)
Click to expand...
Click to collapse
Yes, this is entirely possible. But you're not going to find someone who can say how much work it will be to make it happen unless they've done it themselves. These lithium batteries need control circuitry to charge and discharge correctly. I'd try to use the battery to drive something else (like an LED and resistor) first to see if you can get it to work. If there's not built-in circuitry to prevent that, it my work for the phone too.
Hi all!
I want to know what is the most convenient device to use? Extra battery with charger or 5200mAh Portable power bank battery charger (Romoss)? I like to use a light widget device.
Thanks!
I'm sure you can figure out which is more convenient for your usage, let's face it, we haven't got a clue as to how you use your phone, you have!