Has anyone tried the http://franson.com/gpsgate/
for Qtek S100?
Nope,
I managed to run TT & VisualGpsCE @ the same time though.
M
I want to use Bluetooth GSP and Bletooth headset at the same time.
Anyone tried that?
Micky_dk
Denmark
Everyday!
Micky_dk said:
Has anyone tried the http://franson.com/gpsgate/
for Qtek S100?
Click to expand...
Click to collapse
I have tried it on a Wizard with a Holux GPSlim 236 (BlueTooth) GPS, and it works great!
I ve also tried it with the same Receiver on my Magician. Works great! With this tool you can share any serial connection, for a headset i think, you dont need to use this program
Related
Hi
I have just installed the pocket bluetooth tools from http://bluetooth.i-networx.de/index_e.html which has sorted out my bluetooth GPS, but now my parrot hands free kit doesnt work.
Any suggestions?
Cheers
JustinP
which parrot system do you have and what firmware
tested qtek 2020 1.66 without Bluetooth Tools
DriveBlue 3.13 o.k.
CK3000 3.13 o.k
CK3100 4.02 o.k
CK3300 4.02 o.k GPS tested with Destinator 3 :roll:
CK3500 4.02 o.k GPS tested with Destinator 3
Hi
I have ROM 1.60, the parrot worked until I installed the bluetooth tools, and now it doesn't
Cheers
JustinP
so uninstall bluetooth tools
I have unistalled the bluetoth tools, and the parrot now works, but as predicted the gps does not.
I need both of these thing working, and if they dont the device will be going back.
I cant beleive how unfinished the spv-m1000 is.
JustinP
justinp said:
Hi
I have just installed the pocket bluetooth tools from http://bluetooth.i-networx.de/index_e.html which has sorted out my bluetooth GPS, but now my parrot hands free kit doesnt work.
Any suggestions?
Cheers
JustinP
Click to expand...
Click to collapse
same here
i deinstalled bt tools. only solution to get my parrot ck3000 v3.13 working correctly (most of the time)
regards ize|man
I do have the same problem.
But I'm not using a GPS right now and running without Bluetooth Tools. Like izeman said, this way it's working most of the time.
Currently I am planning on buying a bluetooth GPS Receiver and am pretty much interested in an solution.
So if you find one, please let us all know.
mobileprofi said:
CK3300 4.02 o.k GPS tested with Destinator 3
CK3500 4.02 o.k GPS tested with Destinator 3
Click to expand...
Click to collapse
Can you post your experience with CK3x00. How is it working with XDA II? Like CK3000 or better?
I am not able to use the latest version of BT Tools too because of the CK3000. Try the previous version. My Carkit works ok, but I dont have GPS.
Ian
IanF said:
My Carkit works ok, but I dont have GPS.
Ian
Click to expand...
Click to collapse
by "working OK" do you mean that soetimes it doesn't connect?
Or is it just 'cos the features are limited with XDA II and else you are perfectly happy :?:
...
Madcap Magician said:
by "working OK" do you mean that soetimes it doesn't connect?
Or is it just 'cos the features are limited with XDA II and else you are perfectly happy :?:
...
Click to expand...
Click to collapse
Features are limited, the caller gets echo (but that I am sure this is just an installation issue), without a mount it is impossible to dial while on the move and I still tend to plug it in to charge it while on the move (cig lighter).
Its not as good as I thought it would be and I am thinking of going for a fixed installation. This is no reflection on the kit, just the way I use it.
Hope this helps?
BT tools Plantronics, Parrot and Seefree
I got a slightly different problem. I have a bt headset m3000 plantronics, a parrot CK300 v3.13 car kit (my car) and a seefreekit 1.1 (in my wive's car which I borrow sometimes...). With the BT tools both the plantronics and seefree work ok, but the parrot doesn't bond/pair anymore.
Any solutions? Suggestions? When I de-install the parrot works ok, but then I need to pair everytime another device when I want to use it.
Hi,
If you are using BT Tools v 1.1.0.0 (12.4.2004) it wont. You need to go back a version.
Ian
so with version 1.0.1.2 it should work? :?
PTD said:
so with version 1.0.1.2 it should work? :?
Click to expand...
Click to collapse
Works for me.
Re: BT tools Plantronics, Parrot and Seefree
I tried a previous version of BT tools... doesn't work. Any ideas? But de-installing works fine. But I can only connect one headset (BT Tools recognizes both the plantronics as the parrot as a headset and without BT Tools it can manage only one headset. But then... with BT Tools it doesn't wordk at all...)
PTD said:
I got a slightly different problem. I have a bt headset m3000 plantronics, a parrot CK300 v3.13 car kit (my car) and a seefreekit 1.1 (in my wive's car which I borrow sometimes...). With the BT tools both the plantronics and seefree work ok, but the parrot doesn't bond/pair anymore.
Any solutions? Suggestions? When I de-install the parrot works ok, but then I need to pair everytime another device when I want to use it.
Click to expand...
Click to collapse
Hi all!
I found a strange problem reguarding bluetooth software conflicts beetween Qtek2020's Microsoft Bluetooth Stack and the Widcomm 1.4.1 (BluetoothGPS.cab) Stack.
It means.
Without the Widcomm Stack installed I am able to syncronize via Bluetooth with ActiveSync (com6).
And I moreover can surf the web trough my Qtek GPRS connection via Bluetooth. And that's perfect.
But.
With the Widcomm Stack installed I am still able to syncronize via Bluetooth with ActiveSync (on com6) but I loose the bluetooth-modem capacity!
I own a Trust180 Bluetooth/USB adapter.
I need the Widcomm Stack only to use my Fortuna Clip-On GPS and I will not need it anymore if I could find the way to use it with Qtek-Microsoft Bluetooth Stack, but I have not found the way to do it yet.
So I think I could only surf the registry to find the answer to let both stacks work together, is it possible?
Did anybody have the same problem?
Did anybody find the answer?
Thanks in advance!
Giuseppe
Hi Giuseppe,
I have the same Fortuna Clip-on GPS receiver and I'm able to use it with the MS BT stack. It bonds and offers the option to set up a serial port. If you accept this, it allocates Com 5 to the GPS. I use Tomtom navigation software and in the software set it up as a NEMA 38400 baud connection using Com 5 - all works fine.
Paul
XDA 2i Widcomm and Fortuna
I'm having the same problem with a fortuna clip on bluetooth gps and an XDA2i--for some reason that build of the widcomm stack (3900) doesn't work, yet earlier versions, such as that shipped with the XDA2s, appear to work fine--does anyone know where to find a version of the widcomm bluetooth stack from broadcom newer than 3900?
paulfanner said:
Hi Giuseppe,
I have the same Fortuna Clip-on GPS receiver and I'm able to use it with the MS BT stack. It bonds and offers the option to set up a serial port. If you accept this, it allocates Com 5 to the GPS. I use Tomtom navigation software and in the software set it up as a NEMA 38400 baud connection using Com 5 - all works fine.
Paul
Click to expand...
Click to collapse
Hi Paul,
thanks for your reply, I know my Clip-On should work together with every software for on road navigation...but...I unfortunately need OziExplorer for my off-road navigation and...OziExplorer need a com7 port.
That's all :wink:
I think I'll try Franson's tools: GPSGate & something else as I read here http://www.franson.com/forum/topic.asp?TOPIC_ID=17&SearchTerms=qtek,2020
I wouldn't like to hardreset my device again...I lost the number of my hardresets.
Thank you anywhere
Giuseppe
Hi giuseppe,I hate broadcom stack too, after many hresets, i thinks there is no way to solve this and other bugs, like the serial modem bluetooth connection.
The only winning move is to sell our 2020i and buy magician
Bye
Luca
Hi Luca, don't surrender, it can work!
I simply followed this http://franson.com/forum/topic.asp?TOPIC_ID=17&SearchTerms=qtek,2020 .
Now I am able to use my Fortuna GPS and my BT Motorola HS805 at the same time. And morover I am still using my Qtek's BT modem ability.
I payed 30 euros for Franson GPS Gate, but it solved my problems.
I am now trying to let ActiveSync work via Bluetooth because it's the only ability I lost. :?
Bye, thank You for your post,
Don't surrender!
Giuseppe
Hi all, Thanks for reading. I have been using my Jam for years until it flew out of my pocket into an on coming car! I bought the upgrade. Fantastic peice of kit by far exceeds the jam by such along way. BUT having problems with the TomTom and GPSlim 236. I am not able to connect them! I never had a problem before, anyone else had similar problems?
Please Help?
Mine works fine with my jamin.
The only time I had a problem was when I connected the slim to the PC and switched to SIRF mode, I forgot to switch back to NMEA and that caused problems.
Try linking it to your PC and using the SIRF tool factory reset it.
Hi,
it works for me too.
I paired it with my JAMin, and in Bluetooth settings now I have HOLUX GPSlim236 in "Devices" tab, and "HOLUX GPSlim236 (COM6)" in "COM Ports tab.
Check if you added the outcoming port, and then use GPSviewer on the same port, 38400 baud.
Bye
TomTom and BT GPS
Try removing the pairing and then re-creating the pairing, but this time ensure the name of the device ends in "GPS"....
Charlie Grillo
Re: imate jamin / Prophet - Holux GPSlim 236-Connection Prob
William Richardson said:
Hi all, Thanks for reading. I have been using my Jam for years until it flew out of my pocket into an on coming car! I bought the upgrade. Fantastic peice of kit by far exceeds the jam by such along way. BUT having problems with the TomTom and GPSlim 236. I am not able to connect them! I never had a problem before, anyone else had similar problems?
Please Help?
Click to expand...
Click to collapse
Hi there.
I have a different GPS to you, a BT74R, but I had the same problem.
I followed exactly the instructions supplied with my unit, the instructions downloaded from TomTom and instructions from other forums but I could never connect.
Then I stumbled on this http://www.bbits.co.uk/blog/archive/2006/02/28/7210.aspx
I followed the instructions and my GPS has been working perfectly ever since, as we have the same phone I guess it will for you to.
Try it and let us know if it works.
Hi all,
Anyone using BT GPS?
If so, which one, how do you find it, and what software are you running.
Thanks Guys..
Ratzz,
I use a holux unit, coupled with Garmin Que and GPS Proxy. It only works well wih the tytn rom. I tried it with the DOPOD rom but it keeps freezing the screen.
Another note, Using the tytn rom has eliminated my alignment issues with regards to the screen.
regards
TomTom 6 & a Fortuna GPSlim.
Takes a little while to sort itself out when TomTom starts, but seems fine after a couple of minutes.
I cant use Tom Tom cause of the malaysian Map not being available
I'm using Holux GPSlim 236 with Destinator 6 when on the road and OziExplorer when roaming in nature.
yes I do
Using a Xloc and tomtom 6
Work great
Holux GPSlim 236 with Tomtom 5 (I am about to upgrade) and PTGmap for topo maps in Garmin format.
Using Destinator 6 (yep, I work in Destinator) with a large variety of BT GPS: GNS, Royaltek, Globalsat, Emtec and some others.
Do not forget that after you pair a GPS using MS BT manager, you also need to enable an outgoing portfor this connection.
I'm using Tom Tom 6 with Hamlet gps BT and it's ok!!!
ratzz said:
Hi all,
Anyone using BT GPS?
If so, which one, how do you find it, and what software are you running.
Thanks Guys..
Click to expand...
Click to collapse
I am using Iguidance with the Globsat 338 Its ok, the only problem is that if a call comes through, you have to restart the program.
Which one is the fastest and smallest SirfIII-based BT GPS unit you would suggest for TomTom?
Fortuna Clip-on for me, used with iGo on my m3100, although I have also used it with tomtom on previous pda's. Will upgrade tomtom and put that on a memory card shortly.
I'm using a Navilock BT338 GPS Mouse (SIRF3), which works perfectly together with my MDA3,MDApro and MDA Vario2 as well! I'm using it with TT5.21 for more than a year, and will upgrade to TT6 (just tested, works fine too!) soon.
The navilock keeps contact to satellites which are not seen/found by several others, can even be kept in your pocket and works without problems behind thermo-windows in cars! It is very small and is working over a whole day without loading, standby more than a week, and ist very easy to set up (connect to COM4).
i have tried to connect my blutooth gps to my QTEK 9100
it says it is connected but i can't use it with my TOM TOM software
any suggestion?
agegbg said:
i have tried to connect my blutooth gps to my QTEK 9100
it says it is connected but i can't use it with my TOM TOM software
any suggestion?
Click to expand...
Click to collapse
Need. More. Information... What you told us was the equivalent of "I have gas in my BMW but I can't turn it on"--nice to know, but not real useful.
What ROM are you running? Does your BT work otherwise? What version of TOMTOM? What other apps? etc. etc.
--M