Has anyone managed to install tomtom5 yet?
When I try it crashed my PC program part?? why is this?
OK then
I can announce its a pain in the arse but here it is
http://forum.xda-developers.com/viewtopic.php?t=28085
TomTom
I followed the instuctions, but My Imate JAMin will not work with tomtom, it locks in the wizard, when it schould find the Maps??
hey - post if you're still having trouble - just installed tomtom5 on my dopod 818 pro, so should work ok on the jamin too
I have installed TomTom 5 on my JAMin, I do not have any issues with, it works no problems
Re: TomTom
iggywolly said:
I followed the instuctions, but My Imate JAMin will not work with tomtom, it locks in the wizard, when it schould find the Maps??
Click to expand...
Click to collapse
you have forgotten to put the currentmap.dat file back into the \My Documents\TomTom folder.
Related
First post. So a newbie.
Got my (universal) jasjar yesterday. From initial assessment it's a great piece of kit and NOT as big many claim. Only marginally bigger than PDA2K.
However, Tomtom 5 will not install from the CD. Setup just bombs out as soom as I click install.
I have seen similar reports on the Himalaya(?). Has anyone solved the install problem. If yes, is the himalaya solution going to work on the universal?
Would welcome any advice on what to try. Thanks
hello
from where did you get it has the i-mate launched it in dubai please reply as i would like to get one.
I don't have this problem but I have seen a lot of chat about it on Buzzdev.net. I did a search and have included the search page here: http://buzzdev.net/index.php?option=com_simpleboard&Itemid=&func=view&catid=26&id=2758#2758
Great site anyway to have a browse on
Hope it helps
Thanks Seal, I'll pop over and hava a looksie. I'll let you know if I succeed.
A little help from you please, I have asked this question on so many sites and forums and no one seems to know so you have the actual device might know, Can you cut/copy/paste on the key board, there doesn't seem to be a Ctrl Key, but maybe the Function key does it. Please any anwser would be awesome.
Seal
Yes you can use the keyboard for cut/copy and paste. You use the FN Function+Space keys and this combination brings up editing shortcuts
You have been the final decider, I now must order this device, thankyou heaps, I appreciate your answering.
:lol: :wink:
tomtom5 now working
:wink:
I have now got tomtom working. I followed the instructions on the Himalaya forum and extracted the cab files to my storage card and installed from there.
Now I just need CheckPOInt to recognise the Great Britain Map.
Re: tomtom5 now working
smb5823 said:
:wink:
I have now got tomtom working. I followed the instructions on the Himalaya forum and extracted the cab files to my storage card and installed from there.
Now I just need CheckPOInt to recognise the Great Britain Map.
Click to expand...
Click to collapse
Hi there just wondering how you got your GPS working. Having a nightmare with this Jasjar Widcom BT stack dont work; Cant get it working with TT5.
Set the GPS to COM0 and tomtom found the GPS
Have anyone setup Jasjar with Destinator and GPS receiver?
Re: tomtom5 now working
smb5823 said:
:wink:
I have now got tomtom working. I followed the instructions on the Himalaya forum and extracted the cab files to my storage card and installed from there.
Now I just need CheckPOInt to recognise the Great Britain Map.
Click to expand...
Click to collapse
Thank you.
Could you be more specific? TT3 or TT5? Can you describe or link the process?
Thank you!
Re: tomtom5 now working
faisal.husain said:
smb5823 said:
:wink:
Hi there just wondering how you got your GPS working. Having a nightmare with this Jasjar Widcom BT stack dont work; Cant get it working with TT5.
Click to expand...
Click to collapse
Isn't it the MS BT stack?
Click to expand...
Click to collapse
officially tt5 doesnt support wm5 yet
I have finally cracked it !
MMMMMuuuuupet !!!
See solution in the very end of this mesg.
See my previous post about that:
--------------------------------------------------------------------------------
Posted: Mon Mar 27, 2006 20:23
Subject: Garmin iQue issue
I was spending quite a while looking for this issue already.l
Had some help from Garmin to proceed with com port allocation.
But for the issue with Mapsource to Garmin link they doesn't reply at all.
My clue is that something wrong with RAPI interface which has changed between ActiveSync 3.8+WM03 and 4.0+WM05.
If you watch how older devices work you can see that ActiveSync launches (on PPC) RapiSrv.exe program which will deal with Mapsource by the use of QueRapi.dll.
I've looked for the number of documents on Microsoft regarding new ActiveSync and wm2005, looks like we need new version of ppcQue.
I use iMate Kjam + GPS10
If you find some fix, please drop me a text on mekel#yandex.ru.
--------------------------------------------------------------------------------
MMMmmMMMmmuuuupet !!! I was mmmuuupet.
I found RapiUnlock a long time ago in the net and thought it should resolve the issue. Imagine I even copied RapiUnlock.CAB to Imate, but forgot to run it (not sure what I was smoking that time .
RapiUnlock will solve the issue and I can finaly sync MapSource with GarminQue app on ppc.
Hope this will help someone else.
Can you please post a link to RapiUnlock.
Thanks
How did you get Que on to your wizard? I had a Ique 3600 and loved it untill it up and died on me a couple weeks ago. I still have MapSource on my computer and would like somehow to get it to work with my Wiz.
The Garmin QUE comes with the Garmin GPS 10, it is a package. I was just looking at buying one. I already own 3 older Garmin GPS's and love them. So if I could get QUE to work on the 8125 I would be very happy.
jcb_home said:
Can you please post a link to RapiUnlock.
Thanks
Click to expand...
Click to collapse
I think it was one from MachinaGod
Read this topic first: _http://forum.xda-developers.com/viewtopic.php?t=40389&highlight=machina
Wizard Unlocker
_http://forum.xda-developers.com/viewtopic.php?p=187013#187013
Rapi Unlocker
_http://forum.xda-developers.com/viewtopic.php?p=202299
PS: When you run "Enable Rapi.bat" from RapiUnlocker pack, I think copies CAB file to your device, but can't automatically run it. Need a mannual attention
jcb_home said:
The Garmin QUE comes with the Garmin GPS 10, it is a package. I was just looking at buying one. I already own 3 older Garmin GPS's and love them. So if I could get QUE to work on the 8125 I would be very happy.
Click to expand...
Click to collapse
Works fine on my K-Jam (a bit slow if compare to 400Mhz Ipaq though).
I even found GarminQue 2.80 beta in the Net. This version already properly handle screen rotation.
_http://www.actors-studio.org/modules.php?name=Downloads&d_op=viewdownloaddetails&lid=31&ttitle=GarminQUE_V._2.80
Hope this will help.
maekel said:
Had some help from Garmin to proceed with com port allocation.
what did you do to get the comm port working. Just got my GPS 10 today and Que softeare is working and I can see the maps but can not connect to the GPS.
Thanks
Click to expand...
Click to collapse
jcb_home said:
maekel said:
Had some help from Garmin to proceed with com port allocation.
what did you do to get the comm port working. Just got my GPS 10 today and Que softeare is working and I can see the maps but can not connect to the GPS.
Thanks
Click to expand...
Click to collapse
Have you tryed v 2.8 above ?
Click to expand...
Click to collapse
Hi, I have a Himalaya and Mobile Navigator 6 with British maps installed. Can anyone tell me if there's anything I need to look out for before I buy a Bluetooth GPS device?
Thanks in advance, Tom.
Hi Boopop!
Well, I use Navigon 6.2 with a DACH-Map and everything works fine! Ok, the startup is a little bit slow, but hey, who cares?
Greetings
swordfish76
swordfish76 said:
Well, I use Navigon 6.2 with a DACH-Map and everything works fine! Ok, the startup is a little bit slow, but hey, who cares?
Click to expand...
Click to collapse
Hi swordfish
I intend to use it on my Magician device. It´s already installed on my SD-Card, but when I start the Navigator, it always complains there´s no map.
In which folder do I have to place the map files?
Cheers Lui
I have flashed my device to Windows Mobile 6.1.
Then i installed TomTom and manually moved it to the storage Card.
My Problem is, that scrolling with the wheel on the left side of the device does not work.
If I'm in a textfield, scrolling up or down just generates the char '*'.
This is very annoying, if I try to handle the device one-handed.
Is this a configuration-issue which could be fixed?
regards,
Tobias
Does nobody have an idea for solving that problem.
I have recently upgraded to TomTom 7, but the problem remains :/
regards
Tobias
Twardon said:
Does nobody have an idea for solving that problem.
I have recently upgraded to TomTom 7, but the problem remains :/
regards
Tobias
Click to expand...
Click to collapse
Flash an other WM 6.1 perhaps 015 Tnyynt or something else.
Thanks for your answer.
This might fix the problem.
But as i've spent a lot of time finding the perfect image and customizing it - I don't want to re-configure everything...
Maybe someone else has a more spezific solution to the problem?
Check the configuration file in the touchflo folder (under device\programs).
If you edit it, probably you'll find tomtom.exe in the escluded programs.
Just delete the entry (only tomtom.exe).
regards
I don't mean the Touchflo Scrolling.
My Problem is scrolling with the jog-dial wheel on the left side of the device.
Touchflo scrolling in TomTom doesnt work anyway.
regards
Tobias
Problem solved.
It's a bug of tt7 7.450.9028 fixed in the new version of tomtom7 7.450.9030.
Search for it in the web and replace the tom tom navigator.exe file with the new one.
Perfectly working now on my Trinity
Blue version:
http://rapidshare.com/files/142143041/TT7.450.9030_PDA_qvga_blue.rar.html
Black version:
http://rapidshare.com/files/142267805/tomtom_navigator_7.450.9030.cab
jog dial wheel on Kaiser still doesn't work with 9030
donapalmas said:
Problem solved.
It's a bug of tt7 7.450.9028 fixed in the new version of tomtom7 7.450.9030.
Search for it in the web and replace the tom tom navigator.exe file with the new one.
Perfectly working now on my Trinity
Blue version:
http://rapidshare.com/files/142143041/TT7.450.9030_PDA_qvga_blue.rar.html
Black version:
http://rapidshare.com/files/142267805/tomtom_navigator_7.450.9030.cab
Click to expand...
Click to collapse
It seems the link is dead, anyway I've download tomtom7 7.450.9030 from elsewhere to try on my kaiser, but unfortunately, it doesn't solve the issue with the jog dial wheel of the kaiser. It still doesn't work with this new version. Instead, still used for volume
First a thank you for all the support I found here. Tried to install TomTom 7 on the X1 (legit) with ttn7.cab and TT..repack3, none worked. It starts to install but on the end it shows "unsuccessful". You can open TT, even download also "unsuccessful" a free map, what I do not need. The maps I have are all from TT6, but none is recognzed by TT7. Calling TT does not help they do not support TT7. TT home 2.5 does not see the X1. SE has no idea. I also talked to Navigon in Europe but there is yet not a WM 6.1 compatible version available. Just want my navigation back and working. Can anyone direct me to get it done?
are you using a qvga or vga version of the cab file? i have tomtom7 installed very easy on my x1 and works perfect
also tt7 doesnt support tt6 maps as far as im aware,but tt7 maps everything installed really easy on wm6.1
if you need more help let me know
is it a new purchase? have you had it on a phone before?
patterns said:
are you using a qvga or vga version of the cab file? i have tomtom7 installed very easy on my x1 and works perfect
also tt7 doesnt support tt6 maps as far as im aware,but tt7 maps everything installed really easy on wm6.1
if you need more help let me know
is it a new purchase? have you had it on a phone before?
Click to expand...
Click to collapse
Don't mean to hijack your thread but.....
I would like to purchase the UK & Western Europe maps but not certain which ones to buy (Tom Tom site does not list X1) also I cannot get TT Home to recognize the X1 so not sure if I can install the maps even if got them.
Anyone done this yet?
I bought mine for cruise/diamond and it works fine
Thanks - how did you install it? Was it via TT Home or just download from tomtom.com to PC and manually transfer?
Thanks
1) Use the old TT Home version - 1.5 - this will work !
2) TT 7 works with 6.75 maps - earlier versions not !
Thanks Peter.
I have tried to find TT 1.5 but no luck so far. Any ideas?
Just Google TomTom 1.5 and you will find it - if not leave me a message and I email you the file
Hi Peter, will try what you say to get it done. I used TomTom before on my Ipaq. I must change the "device" in TomTom Home- how? Where can I find on my maps which version they are, they are paid and downloaded. Which version of TT7 are you using? Would be greatif you could help out, thanks anyway