Database Users

MDA Questions after a week of use...

Hello...
I recieved my MDA last saturday, and since then, have been trying to figure everything out. After multiple calls to tmobile, and even a trip back to the store, i'm still stuck with a few questions that i cannot seem to get answered.
1. The MDA came with the default Tmobile theme which works fine in portrait & in landscape, as well as the default blue Windows theme.
However, I have tried to install multiple themes(including some from microsoft themeselves) and i have one annoying error! Whenever I use an "installed" theme, the portrait screen looks fine, but when I open the keyboard...there are two large greyish/white gaps on the side of the theme.
Ex: I'm using a green theme. When in landscape mode, i have a single green square in the middle of the screen with a strip on either side(left or right)
2. My phone is HORRIBLY slow when and if ANYTHING 3rd party is installed. I've tried today plugins that control the memory usage(figured that would help)...however, it just slowed things done. My phone usually runs at about 14mb Free Program Memory, out of the total 44MB(This seems horrible...with just the default programs installed*for the most part* and maybe agile messenger running.). If i install a today plugin, or a game...this drops below 10mb. Therefore, phone usage can be very aggravating. I cannot think of any other way to increase this memory expect for ONE thing. Would it be possible to transfer ALL programs, applications, etc to the miniSD Card(i have 1gb now, with a 2gb in the mail). This way...i certaintly would not be topping out the usage of the card, and hopefully I can free up alot of space on the phone.
3. As we all know, the packaged IM programs are AWFULLY slow and inconsistent. After a bit of research and trials, I have settled on using Agile Messenger. I'm loving it...expect for a few things.
The MAJOR problem I have with it, is the pop up notification. Its annoying to be surfing the web or playing a game, just to have a pop up tell you that you have recieved a message, EVERY TIME you get a new message(which can amount to a great deal in a short time). I've looked all over for a setting, so unless I missed it, is there any way to shut this off?
A side issue with this program, and also the connectivity of the phone is...:
(even WITH the GPRS hack*always on*), I still lose connection(with 2-4 bars of signal) and therefore i get signed off of Agile, rather often. This isnt' such a problem with me, as seeing it takes a short time to log back in. However, when you look at the conversation from another person's point of view...all you see is
"Soandso" Logged off
"Soandso" logged on
etc
etc
(not sure if that last part was a question or a statement, but if theres an answer, i'd like to hear it!)
4.
My girlfriend has a sidekick, and I LOVE the feature of being able to set phone profiles for specific times of the day. Especially during school, it'll go silent, and the second we are out, its back on normal. I have downloaded PZP to try and fix this loss of luxury. However, I personally don't find the program to be very consistent. Sometimes, it seems as if say my "school" profile is fully functioning, while other times, it really doesnt. Call me crazy, but I have taken a shot in the dark and ventured to say that if one touches the volume button on the phone while the phone is on a specific profile...it will throw it out of its cycle. If anyone has some hints/comments/suggestions of their own on this program or other favorites...I would love to hear from you.
5. After I went about and downloaded the Eten dial pad skin, I noticed that all of my contacts were unable to receive contact photos. I quickly realized that any contact that was saved on my SIM card from my previous phone was stuck in this predictament. However, if i were to create a new contact account, it quickly allows me to customize them alot further. Therefore, i was curious if there was any way to transfer my contacts on my sim card>my phone in a fashion that the phone will accept them.
I'm sure i'll think of more questions(these are just the ones that I havent been able to answer after days of searching :-D)
Thank you so much in advance!!!!!!!!!!!!!!!!!!!

Hi,
the speed of the HTC Wizard is very slow. That was my problem too.
for question no. 2:
Moving the apps to the card will result in more free space on the phone, OK, but running the apps from the card will also result in low speed, because the card is slower than the main memory. So I think you won't get more speed by this.
Try to overclock the device with OmapClock. My device works like a charm with 264 MHz (original was 180 MHz).
Use a tool like FreeUp RAM, which is part of the SK-Tools-package.
Running OmapClock and freeing up the RAM from time to time brings significantly much more speed. There is almost no waiting time if you click on an icon. You can even run Skype with OmapClock (many other users do so).
HTH

I have seen tidbits about overclocking through my endless searches the last few days. I've always heard that you have to be careful if you overclock a device, such as a phone. Has anyone had any known issues with the overclocking? Are there risks in having the phone run at that speed all the time?

The Wizard isn't slow. Install a Qtek rom without branding, and it will be much faster.

even the sales associate at tmobile seemed to think it was slow. Upgrading to a different ROM sounds ok, but i'm trying to keep everything via tmobile. thaks for the tip though.

Hi,
Im looking to get the Tmobile USA MDA, but after reading posts like this Im alittle afraid.
I need to run TOMTOM on this device and thinking that this might bring the device to a halt. Now Im starting to think that maybe I should get the 6700. Please let me know what you found out about making MDA faster. Thank you.

TazMan1688 said:
I have seen tidbits about overclocking through my endless searches the last few days. I've always heard that you have to be careful if you overclock a device, such as a phone. Has anyone had any known issues with the overclocking? Are there risks in having the phone run at that speed all the time?
Click to expand...
Click to collapse
There have been long discussion about what is safe with the Wizard on this forum.
See, for example, http://forum.xda-developers.com/viewtopic.php?t=40284
Also, the SmartsKey app automates startup of OMapClock.
http://forum.xda-developers.com/viewtopic.php?t=41060
(It has a number of other uses as well.
Hope this helps.

TazMan1688 said:
My girlfriend has a sidekick, and I LOVE the feature of being able to set phone profiles for specific times of the day. Especially during school, it'll go silent, and the second we are out, its back on normal. I have downloaded PZP to try and fix this loss of luxury. However, I personally don't find the program to be very consistent. Sometimes, it seems as if say my "school" profile is fully functioning, while other times, it really doesnt. Call me crazy, but I have taken a shot in the dark and ventured to say that if one touches the volume button on the phone while the phone is on a specific profile...it will throw it out of its cycle. If anyone has some hints/comments/suggestions of their own on this program or other favorites...I would love to hear from you.
Click to expand...
Click to collapse
There is a known problem with backlighting. See http://zendrui.free.fr/PZPForum/viewtopic.php?t=197
Also, check to see what events PZP is handling for profile-switching. For example, if you have calendar-based or time-based rules, they may switch your profile without you doing anything. Go to Settings, Control to see what you Switches you allow. Or check Time and Calendar for your profiles under the Configuration option.

As much as i'm sure overclocking the device may help, especially in my case. I'm just not sure if its worth the risk. Kind of hard to explain to Tmobile why the phone decided to overheat. Seems overly risky to make such an expensive device, run at higher speeds than its DESIGNED to do. But i'm still not sure, it almost DOES seem worth it...decisions, decisions...
Yes, Thank you for clarifying that...I mostly meant, the inconsistency of PZP with the timing of profiles. It seems as if the program will "switch" to the correct profile, but i don't always see a change in the operation of the device itself. Ex: I have it set to go to school mode at 7:30am, this past week(since its spring break, i've noticed that my incoming calls all had the normal ring volume, as well as system tones, etc...
Although it "says" ""School"" i don't really know if its truely in that mode?!
On this note, i have a question about setting the times(which is what i really want to accomplish). My phone goes to LOUD around 5:30am, School at 7:30 am, Normal at 1:55pm, and Quiet at 4pm.
Nooow, do i have to put two times in the school profile such as 7:30 am-1:54(5)???? so that it has an entire time interval...or can i just tell it when to start, and the next profile will automatically kick in and stop the previous.
Also, does putting the phone in standby or shutting it down have any effect on the profile??
I'm sorry in advance if i'm asking very basic questions, i've just been searching for a long period of time, and i usually can't find a specific answer to my question. So I decided I would spend the time to actually discuss MY problem, with hope someone can help. Again, sorry for any inconvienence or redudant questions.

TazMan1688 said:
As much as i'm sure overclocking the device may help, especially in my case. I'm just not sure if its worth the risk. Kind of hard to explain to Tmobile why the phone decided to overheat.
Click to expand...
Click to collapse
I have a german T-Mobile MDA Vario (= HTC Wizard) and I'm overclocking it permanently with OmapClock and SmartSKey. There is no overheating as far as I can say/feel. I can speed up to 264 MHz (original = 180 MHz). If I try more, the device softresets itself without any damage or loss of data. It's a kind of security mechanism. Of course, battery life is a little bit shorter when overclocking it. But I'm sure, slightly overclocking doesn't damage the device! Maybe the lifetime of the device will be a bit shorter, lets say 6 months in 5 years, but you won't realize that, because you won't be using your device in 5 years. You will sure own some other phone when the CPU dies. Together with the tool "FreeUp RAM" (comes with SKTools), I can reach a comfortable speed for everyday use. But never forget: The Wizard IS quite slow, compared with other devices. You can find smart workarounds for that, but don't close your eyes on that fact.
For running any GPS navigation tools I would consider buying not a Wizard, but a much faster device, if you would ask me. I'm using my Wizard only for addresses (~ 700 items), calendar (~ 1200 items) etc., and without overclocking and using a program like Pocket Informant 2005, that would be an annoying, maybe impossible thing. At the beginning, I had to wait almost 10-15 seconds until e.g. the month overview was created. Switch to the following month - wait again. Choose a specific day - wait again. Oh my god! That needed more patience than I had.

Are you running a basic install without all the phone networks customisation bloat?
you can do this by hard resetting (you will loose data doing this) and then doing a softreset when the customisation dialogue pops up after setting time zone etc.
this will speed things up over an install with tmobiles bloatware. I run tomtom and my device is in general as reponsive as the magician it replaces.
good luck with your phone
R

So guys based on your opinions and experience is it worth for me to get the MDA or should I go with a different carrier and a XV/PPC-6700 ?

Hi yozh,
I don't know the 6700-device at all. Maybe we don't have it here in good old Germany, or maybe under a differnt name. Does it have a bigger display (better for navigation)? Does it have a faster CPU? Then take that one! In my eyes I would never like to use the Wizard for navigation. It's only a better phone, not more, not less. For all other purposes I would buy a bigger machine. I do not want to talk bad about my own device, I have bought it and I use it and it's OK for the everyday things I do with it. It has nothing to do with "I'm proud of my device", like some people seem to be here. It's a phone, man, not a Ferrari or a Rolex. You would tell yourself lies, if you would call the Wizard a powerful device. I had a Palm Tungsten T5 before, and THIS is a powerful device. 2600 items in the calendar (true!), and the reaction time was half a second if you tap on the screen! You can go and have a coffee if you do that on a Wizard.
Just think about it. If you buy a Wizard, try it for a day and then write to me what you think about that phone.
Mh. My english should be better, I know.
Just my 2 Cents!

Hi well the 6700 is the apache I belive and the CPU is 416mhz but its not a "dual core" everything else screen adn such is pretty much the same. Thanks for the reply

SO any one on this forums can recoment apache over MDA ?

yozh said:
Hi,
Im looking to get the Tmobile USA MDA, but after reading posts like this Im alittle afraid.
I need to run TOMTOM on this device and thinking that this might bring the device to a halt. Now Im starting to think that maybe I should get the 6700. Please let me know what you found out about making MDA faster. Thank you.
Click to expand...
Click to collapse
See my posts on http://forum.xda-developers.com/viewtopic.php?t=48448 regarding processor speeds and TomTom.

Wow really TOMTOM runs better on the MDA then on a 400mhz DELL ? Then Im set defenatly getting the MDA, I like GSM network provide3rs better anyway and plus there are so much choices with the phones. I wish I was able to aford the JASJAS that looks really good.

Also don't forget that when you 'close' an appliation it does not really close, it just goes in to background, thus slowing the system down.
Check out your running processes and close all the ones that are not needed or load an app that really closed things.

TazMan1688 said:
1. The MDA came with the default Tmobile theme which works fine in portrait & in landscape, as well as the default blue Windows theme.
However, I have tried to install multiple themes(including some from microsoft themeselves) and i have one annoying error! Whenever I use an "installed" theme, the portrait screen looks fine, but when I open the keyboard...there are two large greyish/white gaps on the side of the theme.
Click to expand...
Click to collapse
Themes built for portrait screens look wrong in landscape view. Easy solution: build a theme that works in landscape view. The Guava Bubbles theme works fine in both because the background image is larger than portrait size.
TazMan1688 said:
4. My girlfriend has a sidekick, and I LOVE the feature of being able to set phone profiles for specific times of the day. Especially during school, it'll go silent, and the second we are out, its back on normal. I have downloaded PZP to try and fix this loss of luxury. However, I personally don't find the program to be very consistent. Sometimes, it seems as if say my "school" profile is fully functioning, while other times, it really doesnt. Call me crazy, but I have taken a shot in the dark and ventured to say that if one touches the volume button on the phone while the phone is on a specific profile...it will throw it out of its cycle. If anyone has some hints/comments/suggestions of their own on this program or other favorites...I would love to hear from you.
Click to expand...
Click to collapse
I use PPC-Profiles-Pro, but you can't slave this to a time. Besides, I'd rather just put it on Silent mode by holding the connection manager button for three seconds (top left side button). Otherwise I use PPC Profiles to switch from Work (BT) to Home (Wifi, no BT) to Sleep (No Wifi, no BT, no email alerts or reminders, just ringer). Walking into a theater, I just go to silent mode.

bilbo_28 said:
Also don't forget that when you 'close' an appliation it does not really close, it just goes in to background, thus slowing the system down.
Click to expand...
Click to collapse
I know. I'm using MagicButton. And OmapClock with SmartSKey. And FreeUp RAM. In deed, I do almost EVERYTHING to make my device run faster.

Loosing the will to live!

Hi Guys
Been having the usual "Turn on" problem with my TyTN since having it, you know, very occasionaly - maybe once a week - you try to turn it from the button on the side and it wont. No matter what you do it stays off and you have to soft-reset.
Well, over the past few weeks its been getting MUCH worse. Im now resorting to rebooting the phone maybe 8 or 9 times a day! I have tried various diferent ROMS and the same issue keeps occuring. I've also checked the ROMS threads to see if anyone else has had this problem as severe as me and they haven't.
I REALLY like my TyTN and don't want to be forced into buying a new phone with the Ultimates just down the roads.
Any ideas???
Thanks in advance!
-------------------
Current build (remember, tried with a few diferent ROMS):
Crossbow Prof
CE OS 5.2.1236 (build 17741.0.2.1) = LVSW build
ROM: 3.30.0.1
Date: 17/4/07
Radio:1.41.00.10
Proto: 32.74.7020.18H

Monty Burns said:
Hi Guys
Been having the usual "Turn on" problem with my TyTN since having it, you know, very occasionaly - maybe once a week - you try to turn it from the button on the side and it wont. No matter what you do it stays off and you have to soft-reset.
Well, over the past few weeks its been getting MUCH worse. Im now resorting to rebooting the phone maybe 8 or 9 times a day! I have tried various diferent ROMS and the same issue keeps occuring. I've also checked the ROMS threads to see if anyone else has had this problem as severe as me and they haven't.
I REALLY like my TyTN and don't want to be forced into buying a new phone with the Ultimates just down the roads.
Any ideas???
Thanks in advance!
-------------------
Current build (remember, tried with a few diferent ROMS):
Crossbow Prof
CE OS 5.2.1236 (build 17741.0.2.1) = LVSW build
ROM: 3.30.0.1
Date: 17/4/07
Radio:1.41.00.10
Proto: 32.74.7020.18H
Click to expand...
Click to collapse
The problem is you have told us nothing about what is running whether you leave it to sleep by itself what's on the today plugins whether you have active sync turned off (ie set to manual) etc etc etc and which of the freezing fixes you have tried. Whether your plugins are on sd card whether it freezes with sd card not inserted etc etc.
Mike

right o' ... get your laughing gear round this
I let it "sleep" itself.
Im running:
Activesync (Exchange push mail - no pattern discovered with regards to receiving new emails)
SPB Weather (Today plugin)
Everything else is standard.
Connecting over 3g/HSDPA
There are other apps installed but these are always "closed" after being used. All apps are installed to the phone memory and not SD card - i've never tried without the card, guess I will try this now! Although, if this is the problem, how do I get around it???? I need my card.

Monty Burns said:
right o' ... get your laughing gear round this
I let it "sleep" itself.
Im running:
Activesync (Exchange push mail - no pattern discovered with regards to receiving new emails)
SPB Weather (Today plugin)
Everything else is standard.
Connecting over 3g/HSDPA
There are other apps installed but these are always "closed" after being used. All apps are installed to the phone memory and not SD card - i've never tried without the card, guess I will try this now! Although, if this is the problem, how do I get around it???? I need my card.
Click to expand...
Click to collapse
Well I can see why you kept those things secret. If someone asked me to compile a list of things more or less guaranteed to cause freezing and refusal to turn on, I think I'd give 'em a link to your setup!!
If you must have push mail (that requires active sync to be active) and weather applications then you will likely continue to have problems.
You may be able to reduce the number of them by NOT allowing device to sleep by itself. I have mine set to never sleep. However I do always use the on/off button when finished.
It's fine to have applications that require connection to internet and today plugins on main memory BUT others should be on SD card. The reason is that running low on main memory (and not even that low!) can cause freezing.
PIE can rack up loads of storage memory - can move storage to card.
Regularly run a third party clean out application.
Mike
PS. resisted the urge to get my laughing gear out. Think I was in shock actually. You could consider writing a "how not to setup your Hermes" guide.

mikechannon said:
Well I can see why you kept those things secret. If someone asked me to compile a list of things more or less guaranteed to cause freezing and refusal to turn on, I think I'd give 'em a link to your setup!!
If you must have push mail (that requires active sync to be active) and weather applications then you will likely continue to have problems.
Click to expand...
Click to collapse
Why would these apps cause it to lock up? One comes with the operating system and one connects to the net once a day. Surley Outlook can't be that unstable as to cause lockups on average every two hours. I doubt SPB Weather is that unstable as well!
Yes, I must have push email. Why waste battery power polling every thirty minutes or so with pull email?
The memory card is going back in. I took it out, went to Sainsburys and BAM its locked again
I will now try the "no auto sleep" thing and see how that goes so thanks for that suggestion.

i had problems like these with my Tytn and eventually upgraded to WM6 (Black 2.5). It really made a difference. Much faster, never freezes and battery life is better.
Severe fix I know but worth considering

mikechannon said:
.....You may be able to reduce the number of them by NOT allowing device to sleep by itself. I have mine set to never sleep. However I do always use the on/off button when finished. .......
Click to expand...
Click to collapse
TOTALLY agree with you there Mike. I was having some real issues with the "coma" effect once the device has automatically gone into sleep mode, this wa admittedly on the original HTC ROM, and was caused by pocketzenphone however since I have (without fail) set the device to NEVER switch off automatically and have got into the good habit of using the on/off button liberally.

warmkiwi99 said:
i had problems like these with my Tytn and eventually upgraded to WM6 (Black 2.5). It really made a difference. Much faster, never freezes and battery life is better.
Severe fix I know but worth considering
Click to expand...
Click to collapse
See my orginial post Crossbow
It has! Sadly though it was still "sleeping".
However, i have taken it out of auto sleep and put it to manual, guess what .... been a couple of hours now and NO lockup! Yay!

Monty Burns said:
Why would these apps cause it to lock up? One comes with the operating system and one connects to the net once a day. Surley Outlook can't be that unstable as to cause lockups on average every two hours. I doubt SPB Weather is that unstable as well!
Yes, I must have push email. Why waste battery power polling every thirty minutes or so with pull email?
The memory card is going back in. I took it out, went to Sainsburys and BAM its locked again
I will now try the "no auto sleep" thing and see how that goes so thanks for that suggestion.
Click to expand...
Click to collapse
Even official applications are not immune from problems. The Hermes perhaps for some configurational reasons (though it's not just Hermes)does not like running active sync from sleep mode and it does not like running other applications that require syncing (eg. weather type ones).
Active Sync is not a particularly stable app and combine this with the Hermes weakness when being allowed to sleep by itself and you end up with a lock-up. (I have seen some explanations for this but only guess work and theories)
Many people have set their devices up to run active sync in manual mode only and this does help to reduce freezing. Of course you cannot do this with push mail enabled. (It might be possible to run some script or a scheduler programme to start and stop Active sync at set times - though the complexities here are as likely to cause a freeze as anything else!!
I am pleased your SD card seems not to be the cause - it can be for some.
I see you are possibly getting some benefit from a manual shut down rather than auto sleep
You may find the odd other idea on my site - freezing/lockups:
http://michael-channon.spaces.live.com
There is a thread here somewhere but i'd need to search for the thread.
You could also try doing without the weather app for a test. However you may not see a difference as active sync is already running for the mail.
Mike

Monty Burns said:
See my orginial post Crossbow
Click to expand...
Click to collapse
Sorry, didn't notice that......

Hi Mike
Turning off the auto sleep thingy has worked a treat. I'm down to one reboot a day now and that has been related to t-mobiles 3g network failure collapse me thinks
So this tip alone is worth its weight in gold!
SPB Weather is running and so is Activesync/push email.
Also now added today plugins:
RhinoStats (CPU/memory monitor - realtime)
RhinoLaunch (custom program launcher)
All seems pukka and "coma" free

Good news, pleased things have improved.
Of course I suppose we could all agree auto sleep should not cause the device to go into a "coma", but still, I've got used to just using the on/off button. Curiously this has improved my battery life as I turn off as soon as I finish, rather than waiting for it to turn itself off (which it won't anyway as I disabled that mode).
Mike

Monty Burns said:
right o' ... get your laughing gear round this
I let it "sleep" itself.
Im running:
Activesync (Exchange push mail - no pattern discovered with regards to receiving new emails)
SPB Weather (Today plugin)
Everything else is standard.
Connecting over 3g/HSDPA
There are other apps installed but these are always "closed" after being used. All apps are installed to the phone memory and not SD card - i've never tried without the card, guess I will try this now! Although, if this is the problem, how do I get around it???? I need my card.
Click to expand...
Click to collapse
I'll share my experience so that maybe it will help. I use WM6 on my 8525 and have found the "unable to wake" problem to be related to my SPB Mobile Shell. When I have the phone set to display SPB Mobile Shell's "Now Screen" upon wakeup, it quite often will not wake. But if I manually put the phone to "sleep" mode, then it will always pop alive fine. Disabling the Now Screen all together leaves me no problem. My guess is maybe it's an SPB issue. So maybe SPB Weather is causing it. I used to use SPB Weather before Mobile Shell, but since Shell has weather built in, I don't need SBP Weather any longer.
Hope this helps diagnose the problem a bit. For the record, I never had a wakeup problem with WM5.

Since going to black 2.5 and then 3.0 I have not had any of the sleep issues.
I run SPB Weather which is set to update every 5 hours, I run activesync to the exchange server which checks emails every 2 hours. My phone auto-offs after 3 minutes.
I did have AS set to When it arrives - but found this to be bad for battery and also stability. Every ten minutes was fine when I needed more urgency. All programs are installed to the phone, exept pie cache and outlook attachments which are on the card. I have not done any special tricks to avoid any sleep/card problems.

[Request] Car Alarm type app for G sensor

This is a bit of a cool gimiky app well it's like 2 apps in one.
Anti theft so if your phone is moved (Picked UP) it makes a car alarm sound and if you put it down it makes the Blip Blip sound to say it's armed.
And the other is a sort of fun mode so if it is moved It will play pre recorded sounds like "Oi put me down!"
I suppose you could call it a warning mode.
Has anyone thought or is thinking about making this?

i geuss it would be very basic to make...
i dont programm, so here is the way i think it could be programmed..
make a programm wich when it runs polls the gsensor, when it detected a change greater than normal when lying on youre desk, or a change of orientation, it would play a wavefile...
that for the alarm part...
the activate could be accomplisched in the following way...
when activated the gesensor is detecting movement because you are handeling it...
when de device is still for a 5 seconds or so.. it plays the blibblib file, and then starts the polling of the sensor above...
to make this complete it would be neccesary to enter a simple pincode to deactive the alarm sound...
i actually tried to get into programming to make this.. but my efforts where came not even close... as long as i cant programm in basic, im lost
anyone with a bit of spare time who could code this?

Good idea
Its an Idea a friend suggested.
It sounds like a really easy app to make but as I don't make apps for mobiles yet I wouldn't know how to build one
I could help with the GUI interface.
the rules would be simple.
when the phone is jogged for about a second play a warning sound.
Then the phone is picked up and jogged violently play the alarm sound looping.
when the phone settles down again play the rearm sound.
The guy who did the lightsaber app could whip this one up

Sounds fun and useful espescially at home where kids tend to touch everything and move things around..
Hope this gets wind

Will it cost much battery?
I guess...

I don't think it will cost much battery, provided you don't keep picking it up!

indeed..
it just polling the gsensor... that shouldnt drain too much...
anyway, when i leave it lying at my desk its most of the time thetered anyway...
graficly it dont has to be very much...

This could be a very funny and useful tool!!!!
Have a barking dog noise when the phone is touched.
Have a woman screaming when the "alarm" is set off...
Have a GPS tracker tool triggered once this program is launched.
Have the camera activate once the alarm goes off
Have the phone shut off with a special lock code when in "scream" mode.

Good
So it's agreed. then.. who can we ask to make this?

norkoastal said:
This could be a very funny and useful tool!!!!
Have a barking dog noise when the phone is touched.
Have a woman screaming when the "alarm" is set off...
Have a GPS tracker tool triggered once this program is launched.
Have the camera activate once the alarm goes off
Have the phone shut off with a special lock code when in "scream" mode.
Click to expand...
Click to collapse
Diamond's battery is only 900mAh, if GPS and camera are turned on, it will cost too much battery.
Athough Gsensor and Lightsensor cost little battery, but what I thought is, if the system should be always turned on (when screen is off)?
I don't know much about that, just guess~
Who can answer?

Good idea! Here is the car-locking sound!!
djfuego said:
This is a bit of a cool gimiky app well it's like 2 apps in one.
Anti theft so if your phone is moved (Picked UP) it makes a car alarm sound and if you put it down it makes the Blip Blip sound to say it's armed.
And the other is a sort of fun mode so if it is moved It will play pre recorded sounds like "Oi put me down!"
I suppose you could call it a warning mode.
Has anyone thought or is thinking about making this?
Click to expand...
Click to collapse
(You sould change the title of your topic to get more intrest, like g-sensor car alarm?)

Dev note
The application could be set to activate when the backlight is inactive.
in a similar way to the S2unlock application in that respect.
Can you poll the G sensor less frequently to save battery life? every 0.5 seconds
I can't see how running this as well as other apps will kill the battery any faster than if you where playing Teeter for a long period.

i`m with stupid
anyways..
nobody who has posted here seems to have programming skills(incuding myself), but the idee is imho a good one..
we just need the app to do the basic alarm thing wich i posted already.. choosing youre own sounds for the different events would be nice tough...
i have no problem to manually activate the alarm(an thus it doesnt need to be "silent" in the taskmanager, otherwise the thing would go off in my pocket when i walk around.. just start teh exe and its active... when enter the correct pin it shuts down again..)
it could be possible to trigger an event, or a external program whenever a alarm is given.. this makes it easier for other developers/user to add functions they need, like a gps logger or wathever.. it doenst need to be hardcoded i mean... just a event trigger to an choosable exe would be suffient...
so...
in the meantime ill keep dreaming sombody does have the time...
but i think it would be a rather popular app when developed, a have seen already many question for software like this...
ill try to clarify in the hopes somebody gets inspirated
- start software
- 10 poll sensor for 5 seconds.
- 20 if valeus differ too much then goto 10 else goto 30
- 30 play sound1 (beebbeeb)
- 40 poll g sensor
- 50 store valeus x-y-z in file/memory Z
- 60 poll sensor, valeus x-y-z.
- 70 if valeus polled differ more compared to memory play sound2 (alarm) else goto 60
- 80 execute external command
- 90 if alarm is ringing execute pin-routine, if correct pin is entered terminate alarm exe
mah, i told you im not a programmer...... but hopefully it will clarify my idea about this software
furtermore.. changing the topictitle into [REQ] CarAlarm-like software would be more suited as topictitle

GUI
I've posted the GUI for the app

Great! Keep up te good work!!

the gui is just a grafical representation on how WE think it should work...
so far no-one has posted who is willing to code..

Is there nobody who wants to try to make a application?

Very good idea..I let my phone always behind on my desk and i am thinking that somebody looks into the phone. This is very usefull to protect my phone..
When is the program ready?

Hi there! I have a little experience with .NET CF programming, and took a look at this thread... Any way, this is my first post on this forum
I think this application is not so hard to program.. The only problem would be that in the Stand-by mode, the G-sensor cannot be polled (correct me if I`m wrong). All the applications are suspended (except for the notifications and usual phone processes).
I think the application would work OK if the alarm is triggered when the phone is picked up from the initial place and woken up from standby mode (e.g. if an unwanted person tries to take a look in your phone ).
This surely saves a lot of battery than preventing the phone to enter standby mode plus polling the G-sensor often).
So what do you guys think?
[Edit] I just found another way to poll the G-sensor every x seconds. The application can be opened even in stand-by mode, check the sensor values, then go back to sleep.

I´m currently working on this gadget but there are/were quite some problems:
1: The diamond has to stay on under all circumstances! If it goes into the suspend mode, the alarm program will also suspend and therefore stop polling gsensor values. This is solved.
2. How to disable or turn off the alarm? I decided to integrate two ways of handling this subject: 1. you can choose to turn it face down and the triggered alarm will stop, respectivly the alarm system will be disabled. 2. You can enter a self-chosen PIN. The problem with this is, that when the alarm system is active and you choose to enter the PIN to disarm it, you have be quick (3sec) otherwise the alarm will go off. If I wouldn´t handle it this way, a thief could snatch the phone and try to enter a PIN while pausing the alarm system doing so.
3. And this is point unfortunately is still not solved: I don´t know how to disable the hardwarebuttons (power, volume, home ...) of the diamond.
4. When finished I want to make a cab file from the project, so that installing is made easier.
So right now the gadget works, but problem No. 3 remains. If you do keep the diamond in a pouch or case it works ok but if you leave it uncovered, someone who tries to steal it, can disarm the alarm system.
Therefor I´m not really satisfied with my work so far and I don´t have much time around this time of the year because I´m married, have a little daughter and still need to do christmas shopping; then come the festivities...
I guess if I can manage to control the hardware buttons I can post the completed project sometime in January.
bye,
Thilo

This thing hangs more than a....well something that hangs about 4 or 5 times a day...

Seriously unimpressed so far.
This thing has hung 5 or 6 times at least today (day 3....) and about the same yesterday
If this keeps up, I'm binning it and reverting to HD
Unbelievable!

What did you do ? Any pattern ?

blackb1ade said:
Seriously unimpressed so far.
This thing has hung 5 or 6 times at least today (day 3....) and about the same yesterday
If this keeps up, I'm binning it and reverting to HD
Unbelievable!
Click to expand...
Click to collapse
Not much info there, my pictures hang up... on the wall everyday.
What are you doing? What have you been doing? Is it due to memory being full (as apps aren't closing)

Maybe I'm not hip to the slang but what do you mean it "hangs" or "hung"?

You must have a duff unit!
Well mine has been completely spot on!
Maybe its something you have installed causing issues? Try uninstalling things one by one to see if that rectifies any problems you may have.

NSAgent said:
Maybe I'm not hip to the slang but what do you mean it "hangs" or "hung"?
Click to expand...
Click to collapse
"Hangs" means "crashes" or, more precisely "becomes completely and permanently unresponsive to anything less than a soft reset".

Possibly - and yeah, I know, that's next port of call TBH - it's just really pissing me off at the moment - NONE of my other HTC devices have ever behaved like this.
Just for the record, I've figured out exactly WHAT makes it hang - I open file explorer and navigate to the 'Windows' folder - bang....I get the rotating four colours and it's back off/battery out AGAIN
Thus far I've only installed Kinomaplay (which ISN'T behaving as it should IMO....although it performs it's media functions perfectly)
Coreplayer - which works ok
SPB Time - again, works 'ok' (both are really f..king fiddly to use/setup with this screen - which is ANOTHER thing I'm not impressed with at all - I've had an iPhone in the past - [capacative] screen response was perfect - this one?? have to jab at it several times sometimes to get the desired result and accuracy just isn't good for smaller targets)
One thing I have noticed is - I've only installed those 3 programs but almost all the device memory is used up!?? Unsure if that would cause an issue with it hanging and I've had loads more than this installed onto mt HD and was nowhere near the device memory limitations.
Hmmm....

blackb1ade said:
Possibly - and yeah, I know, that's next port of call TBH - it's just really pissing me off at the moment - NONE of my other HTC devices have ever behaved like this.
Just for the record, I've figured out exactly WHAT makes it hang - I open file explorer and navigate to the 'Windows' folder - bang....I get the rotating four colours and it's back off/battery out AGAIN
Thus far I've only installed Kinomaplay (which ISN'T behaving as it should IMO....although it performs it's media functions perfectly)
Coreplayer - which works ok
SPB Time - again, works 'ok' (both are really f..king fiddly to use/setup with this screen - which is ANOTHER thing I'm not impressed with at all - I've had an iPhone in the past - [capacative] screen response was perfect - this one?? have to jab at it several times sometimes to get the desired result and accuracy just isn't good for smaller targets)
One thing I have noticed is - I've only installed those 3 programs but almost all the device memory is used up!?? Unsure if that would cause an issue with it hanging and I've had loads more than this installed onto mt HD and was nowhere near the device memory limitations.
Hmmm....
Click to expand...
Click to collapse
I really would consider that you may have a duff unit. There are loads of peoeple on here who advise the screen is too responsive! Plus the lack of memory sounds like the biggest issue.
When you navigate to the windows folder, do you actually let it load or do you just leave it? Reason I ask is that there are thousands of files in there and it does take a while to read them. It did on my HD anyway.
Seems like when reg edits have been done to get task manager working how we are all used to it, should be working better.
Oh, software is made for resistive screens so some presses wont register as the software is more than likely looking for a more presice tap rather than a finer splodged over the actual area its looking for a response in. Should be fine later down the line when more things are brought to capacitive screens.
Hope it all works out for ya

That is true - the menus are a little small for finger use - so it will be a case of waiting I guess.
I removed all the progs that I'd installed already (includng 'microsoft my phone' - forgot about that one)
Screen is very responsive most of the time - but then sometimes it just seems to space out- almost like you catch it off guard - not what I'd expect frankly
It does eventually load the windows folder in explorer - but it takes about 2 1/2 mins to do so - no other folder does that to it, nor any other action - and it wasn't doing that up until yesterday
Hard reset next [if i can figure out how...] - if that doesn't yield significant improvement then it's back to TCR for an exchange (provided some more units have turned up by now!!)
Cheers though

Definitely a problem there, my windows folder loads instantly.

owz206 said:
Definitely a problem there, my windows folder loads instantly.
Click to expand...
Click to collapse
+1 ...... Mine loads in a split second

My phone doesnt hangs, but my /windows folder takes about 1/2 minutes in load.

No problems here either. One recommendation though for those with slow file list loading: try to enable and up the caches (which are stock) with Advanced Config. You will gain some more speed!

Hard reset and we're back to full speed again - I guess it was one of the programs that was screwing it up - thanks all for the 'benchmark'
I'm a bit suspicious that it was kinomaplay, as that was [occasionally]interfering with other operations by overlaying itself on top at times and was hard to get out of that loop as the 'X' [close] box wasn't always *really* there (only shown on screen but no actual function)
I might try it[kinomaplay] again - only this time try and figure out why it associates itself with image files that I'd rather the OE windows prog opened.
Thanks for the tip on Adv.Config Tnyynt - TBH I'd not tried to load that one yet, I'll try that in a sec though (it was a godsend on the HD)
There was definitely something funny going on with the memory space on the device, as after the hard reset I'm back up to '116MB free of 181MB' - whereas, even once I'd uninstalled all that had been added - and deleted additional ringtone wavs - I only managed to get a max. of 53MB available showing.

blackb1ade said:
Hard reset and we're back to full speed again - I guess it was one of the programs that was screwing it up - thanks all for the 'benchmark'
I'm a bit suspicious that it was kinomaplay, as that was [occasionally]interfering with other operations by overlaying itself on top at times and was hard to get out of that loop as the 'X' [close] box wasn't always *really* there (only shown on screen but no actual function)
I might try it[kinomaplay] again - only this time try and figure out why it associates itself with image files that I'd rather the OE windows prog opened.
Thanks for the tip on Adv.Config Tnyynt - TBH I'd not tried to load that one yet, I'll try that in a sec though (it was a godsend on the HD)
There was definitely something funny going on with the memory space on the device, as after the hard reset I'm back up to '116MB free of 181MB' - whereas, even once I'd uninstalled all that had been added - and deleted additional ringtone wavs - I only managed to get a max. of 53MB available showing.
Click to expand...
Click to collapse
Sounds like Kinomaplay is searching and associating with files in the background. I think it may be set to do that by default but you can tell it not to in the settings - only trouble is you may have to wait for it to do it's thing as not sure if you can interrupt it. I got so fed up with the programme on the HD I trashed it - lovely interface though

Strange thing with Windows folder loading, with the "normal" Explorer it takes my device a very long time too (first few times did a soft reset because i thought it was hung also), but with Total Commander explorer the Windows folder is there instantly, sounds like Explorer runs into something, just have to figure out what though.
Crazy . . . . . . . . . . .

Mine takes just a split second to load windows folder!
But it crashes 2 - 3 times a day! Without doing nothing! When i try to unlock it, screen wont go on! Battery off, here we go again! And i got the no sound problem.. After 3-5 calls, i car hear what others are saying but they cant hear a word from me!! This is happening all time.. (tested all this even with stock rom and no apps installed or any tweak etc..)
I read here in the forums that other people have similar problems..And in italy the distribution stopped because of defected rom??
Some say it heppened in france too.. (allthough i live in greece, i got mine sent from france, expansys headquarters..)
So maybe its roms problem? Or just me having a possible defected device..?
Any of you with freezing problems etc..??

Some hangs and freezes in here too, latest was this morning when I had my phone plugged in the charged over night. I tried waking up the phone to check time so I press the power button: Button lights go on but no image on screen, had to take out battery and restart the phone.
Also I have had a few random hangs that required a soft reset too. I have installed the Electopia demo and the OpenGL speed tester. Also installed .net compact framework 3.5 because an app from marketplace said to require it.
I hope HTC takes care of this issues in an upcoming rom update! Otherwise the phone seems fine, although maybe a bit slower that I've seen in the pre-production reviews and videos which is odd...

drfroz said:
Some hangs and freezes in here too, latest was this morning when I had my phone plugged in the charged over night. I tried waking up the phone to check time so I press the power button: Button lights go on but no image on screen, had to take out battery and restart the phone.
Also I have had a few random hangs that required a soft reset too. I have installed the Electopia demo and the OpenGL speed tester. Also installed .net compact framework 3.5 because an app from marketplace said to require it.
I hope HTC takes care of this issues in an upcoming rom update! Otherwise the phone seems fine, although maybe a bit slower that I've seen in the pre-production reviews and videos which is odd...
Click to expand...
Click to collapse
I noticed that the hangs have something to do with the charging of the phone,no matter if its via usb or power pluged. Thanks for confirming though.. This is MAJOR issue for me..You think that your phone is ok in your pockets but it is shut down!!
About the sound problem i mentioned before?

Knock on wood my HD2 is rocksolid for now! Everything is fast and stable!

HD2 often doesn't wake up ?

Hi
My HD2 often fails to wake up when I press any of hard button. Before I perform a hard reset I wanted to ask you guys if there are any tweaks or apps which might be causing this. I am using the stock T-Mobile UK firmware, and besides tweaking a few settings via BsB Tweaks, the phone is pretty much in its original state.
My previous HD used to do this for a time, until I realized it started happening after setting up Windows Exchange server. After hard resetting and setting everything up again, it worked fine. I wonder if the problem I have with the HD2 is also due to the exchange server.
Sometimes the phone does wake up a couple of minutes after I pressed buttons, sometimes an incoming SMS helps it. And many times it just wakes up as it should when I press the Home or power button.
I don't have many apps installed, besides Tomtom.
Cheers !

Hi, the same was to me: sent an sms, locked the device, tried to unlock it in half an hour - screen blank, no response to buttons at all. ROM is stock. I remember, I also had TomTom installed and some other popular tweaks, not remember which exactly. After it, I did hard-reset the phone (restored original state). Didn't had the same problem after it.
But had a lot of other problems with HD2 - unsent sms even after sms fix from HTC, unlock screen of S2U2 locked completely (someone was calling me at this moment!), sporadic change of clock time zone...
It is my first smart-phone, and I'm disappointed soooo much... Used "true" mobile phones for years, but never had such problems.

I had the same problem but it's seemed to have stopped (for about 2 days now). It got to the point where the phone wouldn't get past the boot screen! I had to re-flash in the end....
I think it may be related to the applications I may have running. Although, most people are saying the ROMs so far are not 100% stable. (I'm running the Official Test version of 1.61)
The things I've done to try to get around it is :
- Ensure .NET compact frame work is installed to set up 3.5 and set up correctly in the registry
- Once in a whie I run the cleanRAM application that's been developed here on these forums
I don't think I've found the total solution yet, but I'm sure having these in check will help.

To give an update :
I did a hard reset yesterday. (it's always painful, but also exciting as you can set it up from start - sad i know)
This time I set up the windows exchange server straight from the beginning, then installed all the tweaks, tomtom, hotfixes etc. It woke up everytime since then, touch wood !
I'm not sure, but there are security policies pushed through to the device (like making screen lock compulsary etc) when I set up the exchange server, maybe this is causing some sort of conflict with the device, which is maybe somehow avoided when you set it up before anythin else... I dunno.
I'll let you know if it fails to wake up again.
By the way, so far I only installed BsB tweaks, but didnt apply any tweaks yet. I changed the battery percentage display, 16 quick links cab, and 3G switch in the Coms Manager, but that's it. No tweaking in the registry yet, just so that I can determine the root cause if it happens again. But so far it looks good ! It also seems faster (as it always does

Is it still running stable ?

Chaps,
Look in this thread for a possible solution to your problems....http://forum.xda-developers.com/showthread.php?t=596484
WB

Dark Knight said:
Is it still running stable ?
Click to expand...
Click to collapse
It has been pretty much stable. Since the hard reset I was adding (or tweaking) tweaks and cabs in a controlled manner to see which one might be causing the freezing.
After I installed the Disable Auto Device Lock.cab (search the forum, I think it is in the sticky Tips and Tricks post), my HD2 didn't wake up a few times. I uninstalled dit and it is working fine again.
Weird, but maybe that's the registry change that conflicts with the exchange server policies that are pushed to the device, and causes the freeze.