I attach the relevant files of the rom update utility for the HTC galaxy (Dopod p100). I appreciate help from those who already did work on "NO-ID" upgrades before... currently I would like to update a chinese machine with English rom. The attached brings the machine to bootloader but after few seconds stops and reports Invalid vendor...
I appreciate any help.
P.S. the complete image rom is in the FTP under upload/Dopod p100
Just received my Qtek G100, we need a new forum ;-)
I'm seeing some interesting stuff in the DopodP100 directory, including an ENG ROM, have you tried it ?
My ROM is ENG 1.00.06 ENG - no BT Headset profile :-(
Just received my Qtek G100, we need a new forum ;-)
I'm seeing some interesting stuff in the DopodP100 directory, including an ENG ROM, have you tried it ?
My ROM is ENG 1.00.06 ENG - no BT Headset profile :-(
Hi,
Do u still have the english rom?? Can u upload to the FTP site again?
Same problem Here
Have a P100 with chinese rom and have been looking for an english version for some time now, was able to find a Qtek G100 english rom, but it would give me a invalid ID message. Please, this is becoming a common problem..
Related
Updated rom's to version Radio 4.16 and Rom 3.15.15
URL: http://julia.online.o2.nl/xda_downloads/xda_software1/RUU_ENG.exe = ROM upgrade
URL: http://julia.online.o2.nl/xda_downloads/xda_software1/RSU_ENG.exe = RADIO upgrade
Hello i was wondering if the above ROM updates will work on my QTEK 1010:
ROM Version: 3.16.13 ENG
Radio Version: 3.19.01
I mean anyone tested if before or managed to upgrade his QTEK with the above ROM versions from O2 and were there any complications!!
:?: :?: :? :?: :?:
Thanks
Yes I did and it worked fine. I have it running on T-Mobile MDA, Qtek 1010 and Eurotel dataphone (rebranded Qtek). No problems.
I tried to upgrade and got the following error:
----------------------------------------------------------------------------------
The ROM Image that you are trying to upgrade is not compatible to your pocket pc.
Here are there differences:
Your device information:
ModelW10A:007
ROM Version: 3.16
Language: English
Your upgraded image information
ModelW10A:001
ROM Version: 3.15
Language: English
Please download the compatible utility and try again
-----------------------------------------------------------------------------
So where is the problem?
Thanks
nanis
It has been answered a few times, look through fora. it's a general pocket pc language change question, but applies to this one too. You need to rewrite the ROM header to match your device. Can be sort of tricky if you don't know what you're doing.
Did you install it
I have the same qtek with 3.16 and 3.19 shall I do it or wait to uk version?
If you don't mind O2 startup screen & O2 autoconfig...
supplier or distributor
nanis said:
I tried to upgrade and got the following error:
----------------------------------------------------------------------------------
The ROM Image that you are trying to upgrade is not compatible to your pocket pc.
Here are there differences:
Your device information:
ModelW10A:007
ROM Version: 3.16
Language: English
Your upgraded image information
ModelW10A:001
ROM Version: 3.15
Language: English
Please download the compatible utility and try again
-----------------------------------------------------------------------------
So where is the problem?
Thanks
nanis
Click to expand...
Click to collapse
Hi,
My advise to you is to try to get the latest rom upgrade from
either your supplier or distributors.
Also be very wary and careful when you got advice from this
forum on where or which website to download etc especially the
one which you do not have any informations if it suit your device
or not. If it is not suitable then after downloading it to your device
it will freeze up and you have to get it replaced. These people who
give advise take for granted everyone who view this forum are
professional like them. They never realise there are lots of new
users of the device that are trying to find out more informations.
Sometimes no warning was given to you when they just give you
the website to download etc.. I am one of those new user and also
I believe one of the victims too. I do support their intetests in this
forum but not the way some of the advise are given. Hope they
got the message. So good luck to you and happy upgrading.
Why on earth would you want to go from 3.16/3.19 to 3.15/4.16? Makes no sense to me...
bamse: because it's better
I'am used xda radio upgrade 4.16.00 with qtek
it is fine
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Re: Which is a recent / suitable ROM and Radio upgrade for Q
faisal said:
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Click to expand...
Click to collapse
You may use any ROM Updgrade, you may even want to cook your own ROM, but please do not think of performing a radio stack upgrade if your present radio is working well and giving you a trouble free service.
Hi guys,
I 'm in same situation but with higher versions, and can hardly wait to get a new 2003 ROM.
I can't just play with my XDA as I use it all the time for work and it's pretty stable so far. I just also can't tell that the ROM is 'totally' separate from the RUU in WM2003.
So the question is: is there any one here who has gone through a 2003 upgrade for Qtek 1010 to tell us his thoughts after the upgrade ?
I read a lot about the stability of 4.00.16 ENG, but all been written was for O2 R4.21 or T-Mobile R6.xx. Did any one in this region (Mid East) with R 3.2x went into this upgrade ? and what is the current status ?
Thanx all ....
Latest ...
I tried upgrading to 4.00.11 ENG from the kitchen ... no matter how many trys it just restarts and gives the same error message "Can't open USB/com port ..." ...
Do I miss anything ??
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Biso007 said:
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Click to expand...
Click to collapse
Hi Biso007,
Look at the IDIOTS GUIDE at:
http://www.xda-developers.com/forum/viewtopic.php?t=3171
and follow the instructions thoroughly one by one and you can't go wrong, it did work for me, I was in the same situation.
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Well i am using WM2003 4.00.11 and its working fine for me no problem i cooked in the kitchen you just need to read arround this great forum for a whgile on topics such as upgrades and ROM to know exactly what you are dealing with and then you will able to upgrade smoothly.
:wink:
Hi ARZLEB
I read lots and lots about upgrade lessons but none of them worked for me .... I got an advice to use SD card with bootloader as it's the only working way. Now I wonder why the EXE method was created!!
I see that u got the 4.00.11 working. Did u upgrade it using EXE or SD card. Any help would be so appreciated ... thnx
Well i used the EXE methode the file i cooked in the Kitchen but i didnt change the version i left as 3 at the bottom of the page it works fine i upgraded from 3.XX to 4.XX then i downgraded from 4.00.11 to 4.00.05 then upgraded again all using EXE format so far working great.
i will be honest with you i know about the SD methode very well but never tried it so u have to make more search on this issue.
If you need anything more plz message me anytime and i will be more then whilling to help you step by step...
faisal said:
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Click to expand...
Click to collapse
Faisal sorry for very late reply.
I have flashed my Qtek (bought in Abu Dhabi) with several versions of roms cooked in kitchens (Jeff's and Stefans's), but I have finally settled with ATT release wm2003 Siemens SX56 upgrade. It comes with most of the bugs fixed (except multiple reset bug) and is quite stable. I almost never have to reset it. You can flash the ROM only by SD card method though. You can try it. It's always a good idea to flash using SD card method. USB method using ProgramA is not very safe. I guess the network in Pakistan is compatible with the one in the UAE, so you can safely use it, if you don't mess up with the Radio Stack. My Radio is 3.23.01 and I have no problems with that.
Hello to all of you,
Please help me to upgrade my Qtek 1010 to WM2003
device information:
Model: PW10A1
ROM Version: 3.16.70 FRA
Radio 3.19.1
1 Is it possible to update to wm2003
2 What rom update to use ,
3 Where can I get it ,
4 Is it possible to cook a rom in French ?
Thank you all for your help .
Florin
florin said:
Hello to all of you,
Please help me to upgrade my Qtek 1010 to WM2003
device information:
Model: PW10A1
ROM Version: 3.16.70 FRA
Radio 3.19.1
1 Is it possible to update to wm2003
2 What rom update to use ,
3 Where can I get it ,
4 Is it possible to cook a rom in French ?
Thank you all for your help .
Florin
Click to expand...
Click to collapse
Sorry for late reply. Dunno why nobody has replied to you yet.
I don't know if you can get a french version of ROM, but the one in English released by ATT for Siemens SX56 (A.30.09 ENG) works very good. I upgraded my Qtek 1010 from version 3.14 to wm2003 several versions cooked in Jeff's kitchen but I have so far found this to be the most stable and convenient. Not only that, many bugs in the earlier versions of wm2003 are fixed. (Multiple Reset Notification bug still exists but it can be handled by scarybear software available free at http://www.scarybearsoftware.com
You can get it if you follow this thread:
http://forum.xda-developers.com/viewtopic.php?t=5623&highlight=qtek+wm2003
I discovered that the Activesync method to flash this ROM does not work. The Program A just does not run. I used SD card method. It works.
The ATT release comes with ROM upgrade and Radio Upgrade files. If you are not having any problems with your present radio, never attempt to upgrade the Radio Stack. You can find enough dead devices if you browse through this forum.
Somewhere I read in this forum that the NK.NBF file can be extracted from the downloaded file, however I could not figure out how. I ran the application and quit before it started to flash the device. You can find the NK.NBF file in c:\Program Files\SX56 Upgrade*\...\english\ folder.
You can get the .nbf file out by just opening the .exe file with winzip. At least that's how I did it
Perhaps it can be done with winzip. I use Ultimate Zip and it does not allow it
i just change the extention from exe to zip and the file acts like any other zip file
Hi,
> Newbie: first post <
First, I want to apologize if that kind of topic had been already posted (sure it has been posted!)
I've bought an I-mate JAM in Dubai and upgraded it with the 1.06 WWE Rom proposed on the Club I-Mate site in March. I decided to change that rom in purpose to have my Jam totaly in french but I don't know how exactly because there's a lot of different roms.
Furthermore, I've tried several times to flash my "precious" with the first Fr rom proposed here but after having done the reset (after doing "d2s 80000000 04000000 in romupdate.exe"), ActiveSync do not recognize the device and I can't continue (must be guest partnership, right?).
Should I downgrade that 1.06WWE rom to an older WWE Rom first?
If not, what is the precise procedure?
Already asked? Just give me the link.
Thank you very much.
PS: 'search' function already done.
No Idea? Still waiting for an advice.
here try this file to upgrade... just place this file inside the extracted ROM of your choice and run it ...... you will get a country ID error... don't mind the error just click ok and run the file again (notice that your device will be in the bootloader mode and you should keep it that way).....
and you will find the ROM you want in the ftp...
hope that helps.....
Thanks Papa Docta,
I had this file but deleted it like a noob...thank you!
So I can download the last Qtek FR rom instead of my actual I-Mate WWE rom, fix the country id with the file, and upgrade...
Seems to be easy...TOO easy? :?
yep... download the ROM u like, doesn't have to be the imate wwe and enjoy......
HI,
I had spent lot of time searching for WM6 ROM for my imate ,while doing that I came across Qtek ROM namedas WM6 . After installing i came to know that it was a WM5 rom named as WM6. But i didnt gave up and after searching XDA i got actual WM6 rom and I uploaded it. The Version details of WM6 are :
ROM version 4.0.0.0 WWE
ROM Date 2/15/07
Radio Cersion 02.47.21
Protocol Version 4.1.13.24
Ext ROM version 4.0.0.0.3 PDAViet
But now i want to downgrade back to Imate WM5 original ROM. Kindly help me getting that done.
Thanks in advance..
Regards,
KD
i have a JaMin 2 and i wasn't able to downgrade to the original I-mate Rom but u can downgrade to the NoID WM5 which is better than I-mate Rom
the link for the NvID Rom
The below link is for the New I-mate bootlogo
http://forum.xda-developers.com/showthread.php?t=349635
Hoping this will work for u
Thanks for such a quick reply. Also i would like to know what are the steps to be folowed whiles downgrading. I mean do i run NoID ROM first and then execute Enterbootloader.exe and then Romupdate utility for my G4. Kindly excuse if u find my questions silly, since i have not much knowledge into all this and i am only being concerned about my Imate.
Cheers and thanks in advance
KD
I have the same problem...I cannot hear anything or any body can not hear me...But the thing is that the speaker does play the ringtone when sombody is calling me so the speaker is ok...PLz help..
invercargill said:
I have the same problem...I cannot hear anything or any body can not hear me...But the thing is that the speaker does play the ringtone when sombody is calling me so the speaker is ok...PLz help..
Click to expand...
Click to collapse
i also face the same problem, my rom is WM6 fantastic b4, but after few times hard reset and soft reset and leave it for overnight all back to normal again... sometimes still cannot hear the caller voice.. i just soft reset again..... still no permanent solution yet...
one of the senior member suggested to re flash the ROM... but i'm still not sure how to do it
To downgrade to WM5, follow this.
WM6 and WM5 for I-mate Jamin
Please I have I-mate jamin
I need WM5 and WM6 for it please
also if anyone have it's arabic version ..it will be better
if it's not avilable, I need it's english one
I tried many links but it is all expired or "file cant be found"
please help
thanks alot