hello people
i´ve got a problem with my Activ Sync...
If i want to connect my wizard with my Notebook nothing happend.
i don´t know what´s the problem, because at the beginning there are no problems, but after a hard-reset there´s no connection.
Sorry about my english, it isn`t very good (i´am german ! But I hope someone helps me ...
Here are some informations about my system: Win XP with Active Sync 4.1 and a VPA compact 2 :?: :? [/b]
I have had similar issues with ActiveSync before, and usually what you will end up doing is reinstalling the ActiveSync version that you have on both your laptop and your Wizard. Are you getting any messages at all when you dock your device? Does ActiveSync display a message saying "Trying to connect" or "Looking for device"?
thanks...
the problem was a hub. i had a hub between the wizard and the laptop. without the hub the connection is possible and the problem isn´t there.
but on my desktop, (no hub between desktop and wizard) there´s the problem still existing. the desktop try to connect and search a connection, but... there isn´t any connection...
Troubleshooting ActiveSync is a pain, isn't it? OK, I have a couple of things you can try...hopefully one of them will work...
1. If you have a firewall running (and yes, believe it or not Windows firewall can even be an issue), it needs to be configured to allow ActiveSync applications to work. For that, you'll need to consult the software provider's manual or their web site. Most of them have already identified this as a problem.
2. If you have partnered to this desktop before, make sure that the partnership names haven't changed. In other words your laptop is calling your wizard by the same name as your desktop.
3. Are you running a home network? I think I saw this in another post here, that VPN clients can be an issue because the computer is viewing your mobile hookup as a network connection. Uninstalling the clients can sometimes provide the cure.
I hope that this helps.
shaker,
please ensure you have XP Service Pack 2 on both machines.
ciao!
Related
hello all,
After the installation of ActiveSync, i insert the usb cable to laptop and put the Xda II on cradle, the ActiveSync in computer couldn't find any device (Xda II) and i can't setup the partnership, however, my Xda II display the "connected" only for 2 seconds and then interrupt for ever, i have installed the ActiveSync many times and hardreset the XdaII, but it is still not connected, what's wrong with this? :?: :?: :?:
When the xda 2 is first plugged into usb you should get a message on your laptop screen saying device found htc etc, once this is done activesync should see it. Which version of activesync are you using?
I tried the ActiveSync 3.7 and ActiveSync 3.8, the results are same. The laptop can find the USB, but the ActiveSync can't find the XdaII.
Idea
I am assuming Active Sync works on other computers?
If you are using XP,
Make sure the device is plugged in.
Open up task manager, (Ctr + Alt + Del), go to processes and end task on WCESMgr.exe and or wcescomm.exe.
Right click on My Computer, select Manage. Expand Device manager, Windows CE USB Devices, right click on PocketPC USB Sync and Uninstall, click Yes.
If you see any devices with an explanation point or marked Red, Uninstall them too.
Unplug your device.
Open up Active Sync, under the settings, make sure USB is checked.
Plug in your device.
I have seen this happen if windows did not configure the device properly at first.
As a thank you for my time, send me naked photos of your wife!!! KIDDING!!!! :shock:
Thanks for your help, i have done this by following what you said, but it is still not connected. When the laptop find the Device USB first time, the XDAII just display the "connected" for 1&2 seconds. I click the "Error" on XDAII, which is Synchronize with Server, then it displays:
The connection failed due to mising server information or user credentials. Tap Options, and then the Server tab to verify that your server name is correct. Then, tap'Optaions..." to verrify that your user credentials are correct and try again.
I haven't changed ther Server Synchronization in "Option", and my laptop doesn't need any user name and password to logon.
What's wrong with this? How to set up the "Option" in XDAII?
DUDE!!!
It is hella confusing.. BUT... You do not use the Server setting.
I use the Server setting but I have my own Exchange server 2003 and using Exchange Server 2003 Mobile Services, I have my Contacts, Calendar and Inbox always up to date via the Internet, (I have unlimited Internet through T-Mobile for $19 a month).
You need only to use the PC synchronization. Open Active sync, Tools, Options, Options again and check to make sure it is checked and USB is selected, OK, make sure the other two are "Ticked" as well, OK.. Then try.
This Time I only want naked photos of your DOG!!! :lol: :shock:
There should be some problems with laptop, because everthing is ok when i connect my XDA with other PCs. I can't find what problem is with my laptop. It is running Windows XP professional edition.
Darge, this isnt going to sound very logical, but if you have more than one usb port, please try the other port, I have had similar problems with activesync whic have been resolved by doing this, dont ask me why because i dont know.
May be should try othe type of connection other than USB. Try using either bluetooth or wifi. May be you should search in the forum regarding connection using bluetooth or wifi.
My Xda and laptop are connected and working very well after i reinstalled the Windows XP for my laptop. It was the stupid and only way what i could do, because i have tried all kinds of solutions which were not useful.
Thanks a lot for your advice and help anyway. 8)
Can anbody help me on activesync problem for my WM5 machine Dopod818Pro?
After connecting with my device, program kept 'Connecting' without localizing the partnership with my company laptop? I have already turned off Sygate firewall, but it was not successful to install Partnership!!
Victor
Probably a port issue
You probably need to open up specific ports that Activesync is using. They are listed on threads here if you search.
same problem....and i have no firewall running.
MDA vario connection is not working
MDA Pro is working well
I have already solved the problem by disable Sygate Firewall software used by my company.
But how can I synchonize the device with home Desktop and company Laptop together? Both of them need not to synchonize all of the data.
Thanks!
When I plugged my JasJar into my computer via the USB cable, dirctly to the port on the back of my computer, my Windows XP system immediately detected the new device, and installed "Windows Mobile-based Device" (Network Adapter)
Upon attempting to find it with ActiveSync, it claims there is nothing connected. Upon attempting to activate ActiveSync on the JasJar itself, it comes to a window saying it is not connected, with info to connect to an exchange server.
I am using ActiveSync 4.1 (listed as 4.0 in Add/Remove Programs) downloaded from Microsoft website. I was at the time attempting to sync with Microsoft Outlook 2000. I have since connected the device to alternate USB ports, hard reset my device, upgraded to Microsoft Outlook 2003, and uninstalled + reinstalled ActiveSync 4.1 (in that order) in attempts to get my device working.
Alas, I experience faliure. However, my device charges, and if I uninstall the driver, it ceases charging. I do not have my SIM card in the phone yet, as I would like to be able to get a connection, and upgrade the ROM before I worry about making it a production system. Until then, I will be still using my old phone, who's profile I have deleted from ActiveSync, thinking it would conflict with my JasJar.
If anyone else has had this trouble at all, and figured out a way to get this to work, I would appreciate it if you could let me know. If any other information is needed, I can provide you with extensive information.
I have searched through I-Mate's supprt forum, and through xda-developers forums in the Universal sections, and looked elsewhere, and can not find any similar issues where ActiveSync will not see the device, or where it shows as a Network Adapter.
Thankyou!
yes I had same problem. Goto network connections>click on properties for local area connection Windows Mobile Device and checkmark all 3 boxes (Client for Microsoft Netwrok, File and Printer Sharing and Internet protocol.
It should connect and start working.
yes I had same problem. Goto network connections>click on properties for local area connection Windows Mobile Device and checkmark all 3 boxes (Client for Microsoft Netwrok, File and Printer Sharing and Internet protocol.
It should connect and start working.
I did so. All three boxes were checked, so I unchecked them, saved, disconnected the JasJar, reconnected, checked the boxes, and did the same disconnect/reconnect, and soft reset the phone as well. Alas, it remains in the same state.
I do have a very strict block on TCP/IP ports on my computer, however, that is only with the Ethernet and Wireless adapters vis Windows's TCP/IP filtering, so that should not affect this at all.
Are there any specific IP address settings I should have? I do not have any firewall software installed, Windows XP Professional Service Pack 1, and I have an HP iPaq 6315 that connects and syncs fine . . .
I very much want to upgrade to my JasJar. I am going to have to take it to one of my friend's houses who has a JasJar, and see if his computer sees it. I will not be able to do so for a while, maybe a week or so, but if I can not figure it out by then, it would at least narrow down the issue to either computer or JasJar.
Thankyou for your help, if you have any more information, maybe I just need Service Pack 2 . . . need to clean my HD up a little to make room for it though.
Minor Success
I have more information. I was able to connect to a computer that has Windows XP Service Pack 2 installer. It was a success. I was able to sync. So, I am attempting to install Service Pack 2 on this machine as well, and see if that is what is troubleing the whole sequence.
OK, there is something else. I upgraded my PC to Windows XP Service Pack 2, and it still fails. However, it fails differently now. The network adapter it is listed as has a conflict. I attempted uninstall, and reinstall of the adapter, and Active Sync, and no success.
It works on the Windows XP SP2 laptop, but not on the desktop. These ssytems are very similar in the setup with the way they have been configured, so I am uncertain as to why this is happenning. It makes me jolly sad.
Hi all, im havein a problem syncing my 8125 with my pc with activesync 4.1. when i connect it XP recognixes the phone and a network connection is established, and activesync opens and just keeps saying connecting......the green ball just keeps goin round and round..tried restarts on both phone an pc and tried reinstalling activesync..please help im goin nutz here
It's Probably Your Firewall
I use Trend Micro and I had to create new rules for the firewall. The link below will hopefully get you going in the right direction.
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
thanks for the help
that link was kinda useful, but im still having problems which i think are related to my firewall software. i use kaspersky anti hacker and i have allowed all the processes for activesync in the firewall setup, but i think its the ports that im havin difficulties with. anyone with expierence with this firewall please help!
Cingular 8125 Sync Issue
I have the Cingular 8125.
One thing I can say is that the Sync between the 8125 and ActiveSync is buggy. For instance, It keeps wiping out my favorites bookmarks on my system when doing a bi-directional sync. - wierd.
Anyways, After playing around with this phone for a few weeks, I do know that ActiveSync uses TCPIP via USB to communicate with the 8125. My suggestion is to temporarily disable any and all firewalls and see if it syncs up. When I plug my phone in I get a new network adapter that shows up and obtains an IP address from nowhere (169.254.2.2) as my systems are firewalled from the internet entirely and I don't run DHCP on my network.
I suggest the following:
1) See if Windows see a new network adapter when you plug in the 8125.
2) Disable all firewalls from that adapter.
3) Establish a firewall ruleset allowing data for both your local private network subnet (10.1.0.0/255.0.0.0, 172.16.0.0/255.255.0.0, 192.168.1.0/255.255.255.0) and the 8125 network subnet (169.254.2.0/255.255.255.0)
4) When the phone is connected, it shows up in "My Computer" as "Mobile Device".
Hope this helps.
OCDemonSeed
Same problem
I have the same problem with TyTN e Windows Vista/XP... And I have no idea about the way to solve it!
The strange thing is that happens only with TyTN and not with MTeoR!
I've been using ActiveSync for my iMate Jam for the past 2 years through the USB connection on my laptop.
Last week I signed up for a 3G broadband connection with MTN (South African company) and got a [email protected] E220 HSDPA modem which also connects through USB port.
Since installing it there seems to be something blocking ActiveSync through the USB as although ActiveSync does 'Connect', it can't synchronize. (Syncronise is lowlighted)
Uninstalling [email protected] fixes the problem, so it definately is something in that software conflicting with ActiveSync. Obviously uninstalling is not a workable solution as my broadband won't work, and I need it.
I've downloaded and installed the latest ActiveSync and [email protected] applications, but it made no difference.
My PC is a Dell Inspiron 640m running XP SP2 and my PPC is a iMate Jam running Windows Mobile 2003SE. I know ActiveSync uses port 990.
I've searched the www for a solution without success. Tried calling MTN support, but their techies were busy and not available..."
Has anyone got any suggestions on how I can fix this - Please.
-
Alternatively, if someone can point me at a website where I can find out how to set up synchronisation using BlueTooth between my Dell (Windows XP SP2) and iMate Jam (Windows Mobile 2003SE) I'd be very happy. I can only find sites that refer to other combinations and I'm unable to get it right.
Thanks