TomTom 5.1 - JASJAR, XDA Exec, MDA Pro General

I have installed TomTOm 5.1 on my Orange SVP M5000, i am using a Polstar Fusion GPS reciever, but can get a com port to work with it. I have an XDAII before and had to use a com port patch. have tried the patch on the M5000, but does not work. Is there anything i can do ?
any help would be greatfull. thanks.
cram

http://forum.xda-developers.com/viewtopic.php?t=28386&highlight=bt+working
Follow this link. It should solve the issue

Related

Running XDA with WM2003 ? Radio and TomTom working ?

Hello,
i have XDA with PPC2002 and TomTom Navigation.
Has somebody upgraded to WM2003 and TomTom installed ?
All working fine ? Also Radio ok ?
Thank you very much for your answers
Chris
What happens with language ? I have PPC2002 now in German.
Is the upgrade working with German PPC2002 ?
Will WM2003 be in English ? Is it possible to have it in German ?
Thanks
Chris
i have wm2003 running with navigator, i installed navigator and voice but not gps, upgraded to 2.04 then installed latest gps, no probs except for map display, you have to swap between map and navigator to get the map to display.
smallboy said:
i have wm2003 running with navigator, i installed navigator and voice but not gps, upgraded to 2.04 then installed latest gps, no probs except for map display, you have to swap between map and navigator to get the map to display.
Click to expand...
Click to collapse
@smallboy
Thanks for the answer. Did you upgrade from SX56 soft ?
Any probs with phone or other ?
Can you explain short what important steps you did when upgrade
(Hard Reset, then upgrade phone first or WM2003, ...)
Thank you very much
Chris
do you talk to your gps through a serial cable ? I have tried and failed to get my xda 1, wm2003 to talk to my garmin etrex summit through a serial cable with null modem adaptor.
any tips ?
in the gps app, com 1 comes up as does not exist and com 2 has no data on it.
thanks,
maltloaf
Maltloaf, go to settings/connections/beams, make sure "receive incoming beams is unchecked, this will release com 1, the settings for tomtom should be nmea 4800, or just choose tomtom gps on com1 because this has its default the same.
thank you worked a treat...
malty
Angel_of_Fate said:
What happens with language ? I have PPC2002 now in German.
Is the upgrade working with German PPC2002 ?
Will WM2003 be in English ? Is it possible to have it in German ?
Thanks
Chris
Click to expand...
Click to collapse
German ROM Update for WM 2003 (and screenshots) for MDA 1 is here:
http://www.mathiaspohl.de/mda
TomTom is running fine, make sure that you use the latest version of GPS.
regards, Koponet

Bluooth problem with new ROM XDA II

Hi,
Bluooth problem with new ROM:
ROM-1604eng
ROM-16036wwe
ROM-v16050
ROM -16021wwe
ROM-16052ger
All these versions presents the same problem, now XDA II allows that GPS HOLUX GR. 230 find com 5, and the GPS Viewer obtains to see the data of GR. 230, To put the PwerLOC Destinator does not obtain to communicate itself with port 5, nor using Pocket Bluetooth Tools, in these versions of ROM the Pocket Bluetooth Tools freez in com 7. The only way to use the PwerLOC Destinator and with 1,03,00 ROM and the Pocket Bluetooth Tools, :twisted: :idea: this way I do not obtain to use upgrade ROM.
Somebody has some suggestion?
Best,
Jose

TTN 5 not connect to Qtek S100

My Qtek S100 works fine with TTN 3 but i can't connect with TTN 5.
The voice sound of TTN 5 is no clear, too.
Can anybody help?
I haven't used TTN at all.. but as far as I know.. TTV 5 works with the latest ROM 1.12
I hope someone else could give you more info
cheers
I'm running TTM 5 fine on my MDA compact. Didn't have any problems.
Rom version is 1.11
Stefan
It would help if you told people which GPS device you have and what COM port it uses.
I have an EMTAC bluetooth GPS device.
thanks
I believe that uses COM5. If you look at this thread:
http://forum.xda-developers.com/viewtopic.php?t=23428&highlight=emtac
it has a download link for a TT5 patch to enable the PDA to see COM 5 so it should then work.
re:
I have Qtek S100 bought to optimus, now with Rom 1.12 in portuguese and it worked well with TTN 3 and now works well with the buggy version, I think it's a Beta version of TTN5. My GPS is also an Emtac so I don't know why yours doesen't work
http://forum.xda-developers.com/download.php?id=5517

s100 + tomtom5 + gps bluetooth socket

hi to everyone,
I've a Qtek S100 rom 1.06.04 ita and I'm using without any problem tomtom 3 and my gps socket bluetooth.
As I need ton upgrade to tomtom 5 I tryed to install it, and also tu update to tomtom 5.21 but the sw doesn't recognise the receiver. I've tryed all the software options, but I didn't find any solution.
There's anyone that can help me?
thanks
I think there was talk here, that the update from 5 to 5.** wasn't required on the S100? I can't remember.. but that could be the problem.
I've tryed to update to the 5.21 only because I've the problem with the 5.00
in few days I'll try to update the s100 rom, maybe it's the solution...
the strange is that with the tt3 the receiver works without problems.

wm6 ROM GPS problems

Hello,
I have upgraded to wm6 and the software that worked before, tomtom and igo display: "Invalid GPS device". Can someone provide wm5 or a solution so that i can still us my phone with the GPS ?
And yes, i have tried wm6.5 and frechn wm5 and still the GPS does not work, will i ever be able to fix this ?
Thanks,
Caius

Categories

Resources