Related
Howdy folks,
I used to use WiViT SIM Status Switcher with my Magician, which worked well.
I would like a similar application for WM5. (WiViT SSS will not install on my Wizard)
Does anyone know of such an app that will work with WM5?
try this
it is a slight variaTION AND works with WM5 devices. i use it on the EXEC.
great stuff thanks ! i'll give it a shot
SSS does install now, thanks. But how about the license. The code you were given wont work on a different device. . . .
Just had contact with one of the Wivit developers.
A WM5 version is planned.
Just give these guys some more time.
I installed the download link on my mda II, but I can not start the application, does anyone has a function version / software for switching in WM5?
Does anyone know where I can buy a dual sim adapter for the Wizard (XDA Mini S) please? I don't want one where you have to cut up the SIM.
Thanks in advance.
max999 said:
I installed the download link on my mda II, but I can not start the application, does anyone has a function version / software for switching in WM5?
Click to expand...
Click to collapse
It's a today item which has to be enabled from within settings
Next version STK compatible?
Hi,
I use a dual sim solution where you have to cut your sims.
This worked fine, and the new dual card seemed to work.
It even made a new entry in my program group called "Hypercard"
I didn't had time to fully check it out, but that program is gone after shut down the device or do a soft reset..
Any way to get it back?
I also tried Wivit Sim Status Switcher, but only the cab i found here (Sim Switcher.cab) worked, although i had to manually edit the registry to reflect my Dutch ROM. (Program Files to Programmabestanden)
It would be great if someone could create a Dutch cab or could tell me how to edit..
It doesn't seem to switch the SIM's though.. Possibly because i run WM5 or because the adapter uses STK? (Sometimes it just dissapears from Today/Vandaag screen..)
I really hope Wivit's next version is STK, WM5 compatible. (and multilangual?)
Thanks,
allegro16
This version of the sim-switcher works great with my mai-12 dual sim.
One glitch though: after switching, the operator is not shown anymore. The software only says Registering...
birdibird said:
One glitch though: after switching, the operator is not shown anymore. The software only says Registering...
Click to expand...
Click to collapse
Me too
cizake said:
birdibird said:
One glitch though: after switching, the operator is not shown anymore. The software only says Registering...
Click to expand...
Click to collapse
Me too
Click to expand...
Click to collapse
Hmm, I found out how to get it back:
Disable in your settings / today / items the Sim Status Switcher
exit the settings screens until you're back in the today screen.
Enable the Sim Status Switcher again in your settings, and voila: There is your operator again.
:shock: ???
talkingbollox said:
Does anyone know where I can buy a dual sim adapter for the Wizard (XDA Mini S) please? I don't want one where you have to cut up the SIM.
Thanks in advance.
Click to expand...
Click to collapse
Use the search function. Theres a topic on nocut dual sim adapters.
I added a how-to to that thread
l6cum said:
try this
it is a slight variaTION AND works with WM5 devices. i use it on the EXEC.
Click to expand...
Click to collapse
Sorry, didn't find a link. Try what?
arg0 said:
l6cum said:
try this
it is a slight variaTION AND works with WM5 devices. i use it on the EXEC.
Click to expand...
Click to collapse
Sorry, didn't find a link. Try what?
Click to expand...
Click to collapse
Sorry again, never mind. I had not logged in and the link was not visible
Guys,
I've updated VJVolubilis to control the phone radio. I've put in a function to toggle the radio on and off, so for me, launching it twice will switch my dual sim. It should work on WM5, but I've only tested it on the emulator. Could I ask if anyone gets a chance, just to give it a quick go?
http://forum.xda-developers.com/viewtopic.php?p=256445#256445
Gracias!
V
birdibird said:
cizake said:
birdibird said:
One glitch though: after switching, the operator is not shown anymore. The software only says Registering...
Click to expand...
Click to collapse
Me too
Click to expand...
Click to collapse
Hmm, I found out how to get it back:
Disable in your settings / today / items the Sim Status Switcher
exit the settings screens until you're back in the today screen.
Enable the Sim Status Switcher again in your settings, and voila: There is your operator again.
:shock: ???
Click to expand...
Click to collapse
I cant get rid of the 'registering' . . . .
Like mentioned earlier in the topic:
Just disable/enable the plugin in the Today screen settings, it should work ok then.
I still hope the soon start replying to their mail..
They asked me to beta test and translate to Dutch, so i send them a Dutch copy of SSS, but haven't heard from them yet..
Allegro.
edsub said:
I cant get rid of the 'registering' . . . .
Click to expand...
Click to collapse
Irritated the hell out of me.
The Languange file is just a text file, choose you language and just edit the text. I replaced it with ablank space
B.t.w. I still can't use it to switch SIMS, I need to go to the STK, switch and then turn the GSM function off and back on again. Anyone knows witch DUAL sim adapter handles V1 and V2 sims and can be used with WiViT's switcher?
Thanks, cheers,
cacti
le_cactus: have you tried VJVolubilis? I use a dual sim that uses fight mode to switch. VJVolubilis hopefully works on WM5 and Wm2003 to switch sims this way.
V
Hi
i am having a problem with browing any website on my PPC, the problem is that when i try to open any webpage it stalls on 1kb and it only opens the page partially.
I read another post and they managed to solve this by selecting the correct encoding which was Western European. is there any other possible reasons why this type of behaviour will be experienced on the device?
hope te hear from the superior knowledge of the forum members.
regards
reo
I had that problem when I used one of the custom roms. When I flashed the stock t-mobile ROM, it went away almost completely. Once in a great while it'll happen but I'm talking like twice since going with a stock rom. Couldn't tell you what the difference was as the stock rom performance was fine and I didn't really care enough to look into it further.
reo said:
Hi
i am having a problem with browing any website on my PPC, the problem is that when i try to open any webpage it stalls on 1kb and it only opens the page partially.
I read another post and they managed to solve this by selecting the correct encoding which was Western European. is there any other possible reasons why this type of behaviour will be experienced on the device?
hope te hear from the superior knowledge of the forum members.
regards
reo
Click to expand...
Click to collapse
I'm pretty sure it's a connection issue (I've had similar problems with, say, non-CrEme 4.1 + Toonel pre .54 combinations - see http://www.pocketpcmag.com/blogs/menneisyys/ConfigureToonel45.asp for more info).
BTW, what ROM do you have?
MTU settings could it be the reason ??
Hi
Just to let you no, recently i travelled to another country and i decided to get a sim card and test my device in this country, surprisingly it worked fine i could browse with no problems.
only from in my country on my network do i get this strange behaviour.
Do u think its related to the MTU settings ? if i adjust this then mayb it will allow me to browse, judging from your response i noticed that this option that you suggested is to reduce bandwidth usage therefore allowing to view pages faster.
Thanks kindly
reo
Yeah, this seems to be a problem with your wireless operator. (You could still give a try to it in a, say, inexpensive, GPRS-capable "dumb" phone like the S-E t68i / t610 connected to your PDA / notebook)
reo said:
Hi
Do u think its related to the MTU settings ? if i adjust this then mayb it will allow me to browse, judging from your response i noticed that this option that you suggested is to reduce bandwidth usage therefore allowing to view pages faster.
Thanks kindly
reo
Click to expand...
Click to collapse
You can surely give a try to Toonel (I've BTW linked in Toonel because, under WM5, the (old) Java version has exactly the same problems with old(er) Java environments - I've elaborated on this problem a lot in my articles. That is, the problem was similar to that of yours).
thanks for your help it is most informative, i am currently loading the toonel to test and i will post my results here.
thanks again
reo
setup using newer versions of the program, i hope it does not create an incorrect behviour.
setup toonel have just a quick query
Hi
i have managed to setup toonel version .50, using creme 4.21. i have pIE and this all on a WM5 OS.
i did not utilise the link i just executed directly from the toonel.jar file.
now it is running but i would like to just clearify that i done it correctly.
about the connections i used the method u suggested and created a new connection under the top selection which is used for programs to connect directly to the internet and named it toonel, and made all the adjustments on proxy, i also put the details of the modem which is the GPRS connection for my country.
now i am ready to use.
i have a question about the tab in Toonel called WEB, is there any setting that i should have setup in here, it has a an option called Parent Proxy address.
Regards
reo
HI
ok, i had to reset the device for things to start working properly.
now i hve to use the link, it doesnt set creme as the default JVM. so after i execute i get an error saying **cant find class client.WebUI
im sure there it is a path issue, but not sure about where is the web.ui
reo
Don't struggle with the Java version - use the new PPC-based one. See http://pocketpcmag.com/blogs/menneisyys/ConfigureToonel54.asp .
(Sorry, I've linked in the older Java version because it produced exactly the same symptomps under WM5 as yoour case, not because it's the Toonel version I recommend for you.)
hi
ok, i see. the behaviour i am experincing you noticed it using Toonel java version.
have you get any ideas what could be causing my problem ?
Now we no that it is probably a problem at my network, however is there any way to over come this ?
i actually noticed 1 thing, Magician S100 QTEK works on my network properly!!
any ideas what could be the difference ?
what are the chances that it is related to the UAProfile ? if so how could it effect the browsing ?
regards
reo
no luck with toonnel with "unlimited internet tzones"
now that tzones offers "unlimited internet" ( http://jkontherun.blogs.com/jkontherun/2006/12/got_tmobile_tzo.html ) I tried to use toonel with my wizard to speed up the connexion but didn't have any chance ... I tried the 3 versions on http://toonel.net/downloads.html (I even installed the Creme JVM) though ... some ports must still be closed ...
any idea/comment anybody ?
PS :
the good thing with "tzones unlimited internet" is that I can now use opera mini, gmail java, google maps java, etc ...
i had the same problem with uk tmobile. i called them and they said it would be fixed soon-and a few days later it was!!
maybe call your network provider before messing with your phone settings
dmonik said:
it would be fixed soon-and a few days later it was!!
Click to expand...
Click to collapse
you're right - It's working now yippee !
i know im a noob but i have a few important questions i need to know.
1st. Can you use wifi without the data plan? I bought a unlocked qtek to use on cingular and i was wondering if using the wifi on my home router was free. I really dont want to see a surprise data charge on my bill lol.
2nd. If i bought my qtek unlocked, does that mean it comes already pre registered with the wifi G or do i have to install the cab i found on xda forums to make it G. Thanks again!
IpodLover77 said:
i know im a noob but i have a few important questions i need to know.
1st. Can you use wifi without the data plan? I bought a unlocked qtek to use on cingular and i was wondering if using the wifi on my home router was free. I really dont want to see a surprise data charge on my bill lol.
2nd. If i bought my qtek unlocked, does that mean it comes already pre registered with the wifi G or do i have to install the cab i found on xda forums to make it G. Thanks again!
Click to expand...
Click to collapse
.
Hi ipodlover77 - welcome to the forum. Using wifi as you describe is free. With some of the newer roms it is already set to G, but if you have the same rom as me (see my signature) it will not and then install the cab you found - if you use the one i made it will affect the wifi settings only
oh, then can you please give me the url of the wifi settings you made? will the settings work on a unlocked qtek, used for cingular? thanks. and also, is it possible to stream youtube videos form the site on ur qtek? and finally, (sorry, i always have a lot of questions ) how would i know if im using cingulars data charge on wifi or my own? when i scan for networks on wifi, will it says like "pay"? thanks again for all the help.
IpodLover77 said:
oh, then can you please give me the url of the wifi settings you made? will the settings work on a unlocked qtek, used for cingular? thanks. and also, is it possible to stream youtube videos form the site on ur qtek? and finally, (sorry, i always have a lot of questions ) how would i know if im using cingulars data charge on wifi or my own? when i scan for networks on wifi, will it says like "pay"? thanks again for all the help.
Click to expand...
Click to collapse
My cab is here http://forum.xda-developers.com/showthread.php?t=254420&page=15&highlight=wlan
Yes the settings will work on an unlocked qtek used for cingular. You should be able to stream youtube videos via your wifi router although only those that suit your screen size will prob work properly.
You should never have to pay to cingular for using your wifi on your home router - to test this you can switch your phone to flight mode (phone radio off) and wifi will still work. The only time you would have to pay for wifi is when you connect to a pay wifi hotspot and then you would have to subscribe to the service first.
so what is the difference between the wlan g tweak and the wireless plugin tweak? and also after downloading the right one, do i just move it to the memory card via usb and open the .cab over the phone? thanks
IpodLover77 said:
so what is the difference between the wlan g tweak and the wireless plugin tweak? and also after downloading the right one, do i just move it to the memory card via usb and open the .cab over the phone? thanks
Click to expand...
Click to collapse
wlan g tweak - sets wlan to g mode and wireless plugin is a today screen plugin showing operator, bluetooth and wifi status. Yes that is correct way to install
well because it looks like your the only one helping me im just gonna direct all my questions to you (meschle). http://forum.xda-developers.com/showthread.php?t=255225
that is the link to download the registry wizard, i was wondering if thats the newest version?
IpodLover77 said:
well because it looks like your the only one helping me im just gonna direct all my questions to you (meschle). http://forum.xda-developers.com/showthread.php?t=255225
that is the link to download the registry wizard, i was wondering if thats the newest version?
Click to expand...
Click to collapse
The cab listed there is the latest one
ok last set of questions, or until i think of more lol, but thanks again for all ur help meschle. Ok, to run the Wifi G cab, do i have to download the Registry Edit, or can i install the cab with out it? wat is the mms settings for cingular? and FINALLY, wat is the best program to book up everything? thanks
IpodLover77 said:
ok last set of questions, or until i think of more lol, but thanks again for all ur help meschle. Ok, to run the Wifi G cab, do i have to download the Registry Edit, or can i install the cab with out it? wat is the mms settings for cingular? and FINALLY, wat is the best program to book up everything? thanks
Click to expand...
Click to collapse
No problem, this forum helps noobs period!
With the registry wizard this can do the g tweak for you, so you wont need my cab if you are going to install registry wizard.
Sorry dont know mms setting for cingular as i am uk - do a search it will be on the forum. What is book up? - do you mean look up? = google.
Ah ha quessed it now - backup! I use Spb backup and find it very good - http://www.spbsoftwarehouse.com/products/backup/?en
Others use Sprite backup - also very good i believe - http://www.spritesoftware.com/sprite-backup
meschle said:
No problem, this forum helps noobs period!
With the registry wizard this can do the g tweak for you, so you wont need my cab if you are going to install registry wizard.
Sorry dont know mms setting for cingular as i am uk - do a search it will be on the forum. What is book up? - do you mean look up? = google.
Click to expand...
Click to collapse
Props to you Meschle...
Your patience and kind reply border on the qualifications for sainthood...and I have noticed them in more than this response......
whoops lol. I guess i should read carefully before typing. I meant "boot" up. lol hahah
ok ok ok. I found something weird. WHen i tried to stream a youtube video, it kept saying java script
is outdated or is not turned on? any solution on how to start streaming the videos from the site to my phone?
IpodLover77 said:
whoops lol. I guess i should read carefully before typing. I meant "boot" up. lol hahah
ok ok ok. I found something weird. WHen i tried to stream a youtube video, it kept saying java script
is outdated or is not turned on? any solution on how to start streaming the videos from the site to my phone?
Click to expand...
Click to collapse
Try this then - (from coolsmartphone.com) TinyTube.net continues to get better and better. They've now made it even easier to find, send and watch your fave YouTube videos on your mobile. Take, for example, this YouTube video. Notice the URL - it's http://www.youtube.com/watch?v=RCLYGoM1GrU. Now, if you'd like to watch that on your mobile all you need to do is type http://tinytube.net/watch/RCLYGoM1GrU into the address bar. Just copy the "RCLYGoM1GrU" bit and stick it on the end of http://tinytube.net/watch/ - this can then be used or forwarded to any mobile user via text or email as the address to get the video.
TinyTube fill a very important "gap" that other sites such as Google video have already plugged - being able to convert the Flash-based videos into 3GP format for viewing on mobile devices. TinyTube.net have now added an "SMS this video to a friend" feature for the USA with plans to roll out elsewhere soon.
Boot up software = how do you mean? for what purpose?
knwlsh said:
Props to you Meschle...
Your patience and kind reply border on the qualifications for sainthood...and I have noticed them in more than this response......
Click to expand...
Click to collapse
Thanks for your kind words knwish
sorry again lol. i meant BACK up. Before installing the registry i wanted to back up everything. Like the rom so my phone wont become a brick. So is there an easy program for noobs like me that backs up everything? thanks.
IpodLover77 said:
sorry again lol. i meant BACK up. Before installing the registry i wanted to back up everything. Like the rom so my phone wont become a brick. So is there an easy program for noobs like me that backs up everything? thanks.
Click to expand...
Click to collapse
Backup! I use Spb backup and find it very good - http://www.spbsoftwarehouse.com/products/backup/?en
Others use Sprite backup - also very good i believe - http://www.spritesoftware.com/sprite-backup
OMG OMG hahhaha i found a new set of questions.
1st) how do i scan the area for wifi connections? I keep trying to look for "search wireless networks" but i cant find the button. I dont know any connection name or ids etc so im trying to find out how to search for wireless networks, quick and easy.
2nd) what is the fastest rom? Im using the updated qtek firmware and it is VERY slow. And i was wondering if there is a rom, that does everything the qtek rom does but alot faster.
3rd) how do i take that fricken vibration when i send a text message? I hate feelings the vibration for only sending a message.
IpodLover77 said:
OMG OMG hahhaha i found a new set of questions.
1st) how do i scan the area for wifi connections? I keep trying to look for "search wireless networks" but i cant find the button. I dont know any connection name or ids etc so im trying to find out how to search for wireless networks, quick and easy.
2nd) what is the fastest rom? Im using the updated qtek firmware and it is VERY slow. And i was wondering if there is a rom, that does everything the qtek rom does but alot faster.
3rd) how do i take that fricken vibration when i send a text message? I hate feelings the vibration for only sending a message.
Click to expand...
Click to collapse
Hey you have set up your own thread for Q's lol. First change your name to Wizardlover77 and we are in business!
If you just turn your wifi on via comm manager it will automatically search for you. Others use wififofum http://www.pocketpcfreewares.com/en/index.php?soft=1020
Plenty of roms out there - which rom are you using? i.e. the numbers
There is molskis rom that gives you 30mb free ram and farias new 3.2aku rom just to mention a couple. Browse the wizard upgrading for a week or so before deciding to upgrade and you will need to decide if you have a g3 or g4 chip - ipl numbers - .001 = g4
Change your notification settings for messages in settings\sound and notifications not to have vibration.
meschle said:
Backup! I use Spb backup and find it very good - http://www.spbsoftwarehouse.com/products/backup/?en
Others use Sprite backup - also very good i believe - http://www.spritesoftware.com/sprite-backup
Click to expand...
Click to collapse
Sprite is the only app that can restore after a ROM upgrade
ok. So when i turn off my phone, it says some data will lose? which exactly will the device lose?
and also if i turn off my phone. does meschles Wifi G tweak, erase? it says its still installed but are the settings messed up or is it perfectly fine still?
ok I thought of another problem. like I said before I don't have any data plan on my package so I'm surfing wifi over my own home router. ok so I found this really cool site that actually streams the videos to my phones WM. is this costing me data I don't have? the videos streaming url was like mms something. just want to make sure its not costing me money. and lastly do they charge me for downloading stuff from the internet straight to my phone while using my router connection? thanks in advance!! happy thanksgiving everyone!
GPRS.exe was a program someone developed here which activated the data connection. Unfortunately, I can't find the original thread, so if someone can point me there this post can be deleted.
I was curious as to who the developer was, and if they could easily pump out a version that doesn't display any pop up messages (New IP or Can't connect), either by default or command line. This is so it can be used in startup scripts for programs that don't connect by default.
Thanks.
If you are looking for the author, I beleive it originated at MoDaCo...Follow this thread might take you there:
http://forum.xda-developers.com/showthread.php?t=333429&highlight=NOGPRS
The program can just be found here:
http://forum.xda-developers.com/showthread.php?t=310087&highlight=NOGPRS
jomo25 said:
If you are looking for the author, I beleive it originated at MoDaCo...Follow this thread might take you there:
http://forum.xda-developers.com/showthread.php?t=333429&highlight=NOGPRS
The program can just be found here:
http://forum.xda-developers.com/showthread.php?t=310087&highlight=NOGPRS
Click to expand...
Click to collapse
This is not what he is looking for, he is looking for GPRS.exe, not NOGRPS, they do completely different things.
As far as having a version of GPRS.exe without messageboxes, I've been looking for that too, but haven't found one yet. Another option, is to use Mortscript which has a function you can call that to connects to the data network.
GPRS On
Here the prog.
Just execute the exe on you device
Cheers
hrb
hrb said:
Here the prog.
Just execute the exe on you device
Cheers
hrb
Click to expand...
Click to collapse
Doesnt work on HTC Kaiser with official WM06.
Nadav.
hi,
I used to be able to use my mogul as modem so I could sruf the web on my laptop from the road...I made the reg changes to make it possible under WM5.
I upgraded to WM 6.1 ROM today, and I'm no longer able to get on the internet using the phone...
is there more reg changes I need to make or did they do away with this ?
well - I was able to get this to finally work using the same registry changes as before on WM5.
Question:
Is it still safe to use internet sharing on WM6.1 without sprint finding out you are using the phone as modem and charging the $40? ( i rarely use it)
pj94z said:
well - I was able to get this to finally work using the same registry changes as before on WM5.
Question:
Is it still safe to use internet sharing on WM6.1 without sprint finding out you are using the phone as modem and charging the $40? ( i rarely use it)
Click to expand...
Click to collapse
----------------------------------------------------------------
maybe.
or you can a,lways find a good wifi sharing program that hacks past that and those are untraceable.
mike760534211 said:
----------------------------------------------------------------
maybe.
or you can a,lways find a good wifi sharing program that hacks past that and those are untraceable.
Click to expand...
Click to collapse
As for these programs, what would you recommend? Can you point me in the direction to download?
Thx