Silly question...... i know
Could someone tell me how to do a hard reset please.
Cant find it in the search.
I dont have the destructions for my mini s im afraid.
I pressed the 2 top buttons on keyboard and pressed stylus in hole, but that only does a soft reset.I thought this was the way to do it.......Obviously not!
Cheers
Go to settings clear storage, it will ask you to press 1234 and yes. It should only take a min or two.
hold comm manager + voice comm insert stylus into hole [do not release 2 buttons]... wait a few seconds then a message will appear asking you to press the send button, once you press send it will perform a hard reset.
cheers guys
Related
Hi everybody,
I just can't seem to reset my K-Jam. I tried it a dozen times but it still is a soft reset. Ok before everybody get's angry: I know how to hard reset (hold the two side top buttons and press the reset button). I tried it in different timings like first holding down the two side top buttons then pressing the resetbutton and holding it for almost a minute. Or first pressing and holding the reset button and then the two buttons but it is always a soft reset.
I guess it is a soft reset because I don't get the calibrate screen thing.
Any tips here because I want to get rid of the slowdowns from the virusprogram....?
Wouter
Hi,
I had the same problem. Theres a facility in settings called 'Clear Storage'
start>settings>system>'Clear Storage'
this actually does a hard re-set.
Thanks Webster,
I didn't think of that one! That did the trick!
Wouter
Hold down the Comm Button and Voice Button continuously while tapping the reset hole.
As long as you keep holding down the two buttons, the screen will go black and soon prompt you to hit Send to hard-reset (wipe the unit), or any other key to continue with a soft-reset (reboot).
Thanks Beyondthetech,
I'll try that next time when I need it :wink: .
Great blog you have! Has been very useful in making up my mind.
I'll install TT 5 later now I know how it can be done. :lol:
Wouter
Just a small update
Just to let you guys now. I finally found out the proper way to hardreset.
The trick is not to let go of the Communications and Voice Command button until you have stopped pressing the soft reset hole. Just wait with releasing the two buttons until there is a message on the screen asking you to press the Sent key to hard reset.
Another funny thing is that you can restore a backup (made with Sunny Backup) on another K-Jam device. It still runs. This came in handy because I exchanged mine for another because of some hardware problems.
Wouter
Which one is the "Sent key".
the telephone "call" key (green handset) (left side)
Can someone please advise me, I've brought the Xda Mini S today. I am trying to pefrorm a hard reset and following the instructions from the user manual but it keeps on performing a Soft Reset instead.
What do I do? Please help!
start / settings / system / clear storage enter 1234 and away you go!
Thank you very much Lord Buckingham, it's done now!
Thanks again!
So why doesn't the manual say this, and they way it says doesn't work?
I had same prob, so did a quick search on here. Great wealth of information!
some of users said they were able to do hard reset by buttons,
holding those buttons and quickly pushing soft reset, they said it realy hard to find moment to release buttons...
anyone know the button combo? TIA
hard reset procedure: hold comm manager button (the one on the left), power (on the top) and voice dial button (the one on the right) at same time, and while holding them press soft reset buttton. realise soft reset button (stil holding top 3 buttons and format screen will appear. pres green button and that's it.
wow that's a lot of buttons! will try that the next time i do a HR. thanks
My manual states comm manager button, voice comm button together then reset button
XDA-PLUS said:
My manual states comm manager button, voice comm button together then reset button
Click to expand...
Click to collapse
Thats correct.
No need for the power button to hold.
have anyone gotten that to work..boy have I tried..but I never seem to find the right timing
lynxlynx said:
have anyone gotten that to work..boy have I tried..but I never seem to find the right timing
Click to expand...
Click to collapse
There is no timing...
Just press and hold comm. button and the voicedial button.
Than put your stylus for one sec on the reset hole and still hold the 2 buttons mentioned above.
Than the phone will boot and you will see a screen asking you to press the (green) send button to hardreset.
Panja said:
XDA-PLUS said:
My manual states comm manager button, voice comm button together then reset button
Click to expand...
Click to collapse
Thats correct.
No need for the power button to hold.
Click to expand...
Click to collapse
i had the same problem with hard reset yesterday (my first hard reset ever . after a few tries i found that most proper way to hard reset device is:
1) press & hold comm button + voice dial button
2) press reset button (while holding buttons mentioned above)
3) KEEP HOLDING comm & voice dial buttons
4) after a while hard reset is done, so we can release all buttons
big thx eva_d!
arrggh!
This has been the best forum i have come accross. My phone function ends up as being a blank in the task manager and i constantly by mistake quit i while i am trying to quit something else. a proper pain...
I am tryin to hard reset the phone so i can set it up in corporate mode...i just seem to be completely unableto get it...i have been trying to hold the two buttons and press reset while still holding the two buttons....five minutes later still nothing....arrgh. Any solutions.... :shock:
This is from the manual:
To perform a hard reset
1. Press and hold the Comm Manager button and Voice Command
button on the device.
2. Keep the two buttons pressed, and at the same time, use the
stylus to lightly press and hold the RESET button.
Click to expand...
Click to collapse
it is frustrating at first but it is easier with practice. in my experience i released the stylus after about 5 secs and i was prompted with a question if I wanted to format the device [hit send button to start]
Do you really need hard reset?
Did you try clear storage?
Some times it is enough to clear your phone...
If you're feeling generous, can you try hardreset using VJEschaton?
I've never tested it on WM5 hardware, I haven't had a good reason to hardreset yet.
V
VJEshscaton now works on the Wizard, although I think there are easier ways to reset our phones Eg, using them!
V
fresh123breeze said:
Do you really need hard reset?
Did you try clear storage?
Some times it is enough to clear your phone...
Click to expand...
Click to collapse
Is there any difference?
Because i tried that and i think they do the same job!!!
How do i hard reset a Prophet?
I currently do not have my manual with me.
Thanks
Imp
hold camera and connection button (on the left of the device) keep pressed and then hit the soft reset button at the bottom of the device. keep the 2 side buttons pressed until a message pops up asking if you want to hard reset. press green call button to accept.
Alternative method: Go to :arrow: Setting > System > Clear Storage . I t will tell you to enter '1234' and then press 'YES'. It will hard reset you PDA.
fastest said:
hold camera and connection button (on the left of the device) keep pressed and then hit the soft reset button at the bottom of the device. keep the 2 side buttons pressed until a message pops up asking if you want to hard reset. press green call button to accept.
Click to expand...
Click to collapse
Thats the correct answer, according to dioxda2 the 'clear storage' option does not do a hard reset and now that I tried, I know he is right.
I'm having a heck of a time figuring out how to hard reset my MDA.
I've tried holding down comm mgr and camera while hitting the reset button. This brings me to the sd load screen and then to the tri color screen and nothing happens from there. I also tried the voice record button and camera button press while hitting reset which takes me directly to tri color.
Sorry for the dumb question, but can anyone give me explicit directions? Or maybe a tip on something I might be doing wrong?
start>settings>clear storage
Default password should be 1234. That hard resets your device as well.
You're close! Hold Comm and Record at the same time. While hodling hit the Reset for a couple of seconds. Continue Holding the two buttons and you'll get a Format Screen. Hit the Green <Send> button on your phone.
Or else you could hit the Clear Storage button from Settings / System though I never have.
Good
luck!
Steven
chow
Thanks guys.
Much appreciated.
Hi,
Desperately trying to hard reset an MDA Vario.
Holding comm button, voice command button and hitting reset but after 100 times its just not working.
Is there another way of doing it? Just what am I missing??!?!
Thanks in advance,
HPJ
You are doing it the correct way, after you hit the reset button you should see something like "Press send to restore factory default" you should then press "SEND" ie: the green telephone button.
You could also try "Settings/system/Clear Storage"
Cheers.
That did the job, thanks. No idea the usual way would not work, and its good to know that 'clear storage' performs a hard reset....I orginally thought it may only do a soft reset!
Cheers
Could it be that you were still holding the buttons in after you pressed reset?
You have to let them go as soon as you press the reset.
Cheers
Dave... said:
Could it be that you were still holding the buttons in after you pressed reset?
You have to let them go as soon as you press the reset.
Cheers
Click to expand...
Click to collapse
as well, I struggled with this for ages as well. On my Wizard with the latest imate ROM you have to HOLD the Comm Mgr + Voice Dial (and when still held in) press & release the reset button BUT CONTINUE TO HOLD THE TWO BUTTONS until a message appears on screen saying press the green send button to Hard Reset
Dave idea "Settings/system/Clear Storage" is better..i was struggling with hard reset