WiFiFoFum 2.0 WM5, VGA + Landscape support - JASJAR, XDA Exec, MDA Pro General

This appears to be being updated almost daily, not tried it yet, will have a go when I get home tonight.
http://www.aspecto-software.com/WiFiFoFum/files/WiFiFoFum-2.0.CAB
The thread is here...
http://www.aspecto-software.com/xoo....php?viewmode=flat&topic_id=311&forum=1&type=
remember the attachment may not be the latest version!
Regards

Thanks for the link. I think I'll try it out tonight.

works good, but i think there's a bug where a new MAC peer address appears every 5 seconds during a scan. Now MAC's don't rotate do they? Is it a falsey from the device itself?

after installing it ok, when i run it i get a error saying ""this version of (wififofum.exe) recuires a newer version of microsoft. NET framework than the version installed on this device""
Can any one please tell me how to fix this
thanks
John

Pop along to microsoft and download the .net compact framework 2.0

applecom said:
after installing it ok, when i run it i get a error saying ""this version of (wififofum.exe) recuires a newer version of microsoft. NET framework than the version installed on this device""
Can any one please tell me how to fix this
thanks
John
Click to expand...
Click to collapse
Here it is URL .NET .
GuidO

Thanks for both the replys, i have now downloaded a 25mb file, what do i do with this to make WiFifofum work on my Exec
Thanks

OOOPS sorry i did not realise it was run from the PC to install
WiFiFoFum, now works, Thanks again for your quick Help.

Related

NETCFSetupv2 Problem

Hi!
I have a Cingular 8125. I have installed the NETCFSetupv2 software in my phone memory.
Whenever I run a software that's based on using the .NET Compact Framework 2.0, I get an error. Attached is a screenshot of the error.
I have uninstalled, reinstalled the NETCF software, but I keep getting the same error message.
I would be grateful if somone could please help me with the problem. I went to the Microsoft site, but could not find a solution there.
PLEASE HELP ...
Thanks & regards ...
do you have a link to the download page?
Regards,
Jason
i have same problem too. I have a installed a 2.0 version, when i start a someone program requires a new versions!!!
I try to reinstall a .NET 2.0, i cant because i have a new version!
I find a patch from Microsoft site:
.NET Compact Framework 2.0 Service Pack 1 Patch
and everything is OK
Link:
http://www.microsoft.com/downloads/...87-9B5E-40C6-8D10-D3A43E5856B2&displaylang=en
new version of CF ??
Have you tried to install the 3.5 version? Cant remeber where I got it from but somewhere in here I found a link to MS's website for download. you could try upgrading.
SuPerSoBBie
Are you sure you downloaded the official release from MS, not from some third party site like freewareppc.com or whatever? (not disparaging that site, just pointing out possibility of corrupt file on third party site...)
Click here to download from MS themselves:
Official MS .Net Compact Framework 2.0 Distributable

Athena Unlocker Error

Hi,
I am new here. And, I am trying to unlock my Athena. I downloaded olipro's unlocker an tried to run it several times. But, I am unable to use it at all. What I keep on getting is in the screenshot. Please tell me what mistake am I making?
Thanks and Regards,
niits84
install .NET framework 2.0
Thanks
Hi,
Thanks for the reply. I already have .Net 2.0 installed. But, I realised that I have a Microsoft security patch installed for .Net 2.0 . This thing was probably automatically updated. So, I uninstalled it and volla! it wotks now
Cheers,
Niits84

How do you block incoming calls for windows 6?

I googled and found the program called call-block.
problem is that
1st - its not free
2nd - it cant be installed on my PDA through vista
When i installed it, it just says it didnt detect any microsoft activesynch and when i downloaded the latest version (4.5) of activesynch, it says it cannot be installed on vista -_-.
So yeah, i'm really stuck here
can anyone help?
Stalvros said:
I googled and found the program called call-block.
problem is that
1st - its not free
2nd - it cant be installed on my PDA through vista
When i installed it, it just says it didnt detect any microsoft activesynch and when i downloaded the latest version (4.5) of activesynch, it says it cannot be installed on vista -_-.
So yeah, i'm really stuck here
can anyone help?
Click to expand...
Click to collapse
...CallFirweall
Hello.
Callfirewall works fine and it's free: http://www.pocketpcfreewares.com/en/index.php?soft=1993
ummm, how do you install it?
also im assuming that i need to download the 'smart phone' version~
thanks for that link
looks like a great site
thank you
Stalvros said:
ummm, how do you install it?
also im assuming that i need to download the 'smart phone' version~
Click to expand...
Click to collapse
trinity is a ppc...not a smartphone
http://www.logic-unlimited.com/callfirewall.php
Here there is newer.
Bye
thanks for the newer site
umm, how do you install it?
need help~
just put it into u r device,run the program in device,so that it will install it
you mean i can place it anywhere?
or must it be specific?
like perhaps my mini-sd card under msrogram files
or soemthing?
(sry, very very new at this)
yoyo
hi there,u can try out this software SpbPhoneSuite 1.3 from www.spbsoftwarehouse.com..there's more than wat u want...serial no???ask me if u want for FREE...
can the Callfirewall works on touch diamond p3700 if so how do i install it??
LOOKS THESE PAGES
http://www.geckobeach.com/cellular/secrets/gsmcodes.php
http://web.telia.com/~u47904776/gsmkode.htm
I LIVE IN ARGENTINA BUT THIS CODES WORKS IN ALL COUNTRY
GOOD LUCK
SORRY FOR MY POOR ENGLISH

HTC Home Customizer application

Hi!!
Anyone knows if it's possible to run the "HTC Home Customizer application" on a Qtek 9090 ??
I tried to install a couples of times, everythings looks correctly but never works..
Thanks !!
well it works just fine on Blueangel, if you useng WM5 you need .NET CF 2.0 to make it work
I have the WM6.1 CE OS 5.2.20758 and Microsoft .NET CF 2.0....
There are any special thing that I need to know to make it runs??
or any tutorial?
Thanks !!
trigo00 said:
I have the WM6.1 CE OS 5.2.20758 and Microsoft .NET CF 2.0....
There are any special thing that I need to know to make it runs??
or any tutorial?
Thanks !!
Click to expand...
Click to collapse
Not that I can think of. It is really a "Run the Cab" and "Have Fun" kinda application. It may sound like a silly question, but which version of HTC Home do you have installed? You may have to revert back to an older version to make it work. However, I have not seen anything that suggests this... but hey, give it s shot, it might just work
Thanks for your advise mate!
I'm using the "HTC Home Version 1.0 Final" and "2.1 Build 1005722" Plugin version
You know where can a find the old version ??
In the official website only I can find the new one...
Thanks again!
trigo00 said:
Thanks for your advise mate!
I'm using the "HTC Home Version 1.0 Final" and "2.1 Build 1005722" Plugin version
You know where can a find the old version ??
In the official website only I can find the new one...
Thanks again!
Click to expand...
Click to collapse
Try this one. I used to use it without any issues (not that I can remember though). I am not sure which version it is, but I know it works...
Thanks mate !!
I gonna try it now
It works perfect!!!!
thanks very much
The only problem is that now I can't find the HTC application to chage the apparence
Is that normal???
done !!!!!!
just install htc 1.0 final version after your file
Thanks again !!!!!

where can I find .NET Compact Framework 3.5 for htc hd2???

when I have downloaded some apps it is not working, then brings up a message that says "This program requires a newer version of Microsoft. Net Compact Framework than version installed on this device":S
Is it someone who can help me with this?
I'm pretty NOOB at this
http://www.megaupload.com/?d=2ZGV1DNJ
Lol...
You're not in the right section...
Anyway, you can find it here :
http://forum.xda-developers.com/showthread.php?t=347537
xobersten said:
when I have downloaded some apps it is not working, then brings up a message that says "This program requires a newer version of Microsoft. Net Compact Framework than version installed on this device":S
Is it someone who can help me with this?
I'm pretty NOOB at this
Click to expand...
Click to collapse
you for real son?
thanks it helped a lot

Categories

Resources