Database Users

How to switch on automatic telephone answering

In the setting of "telephone"is the opportunity to set the device to automatic answering after 1-15 rings. That would be ideal when you are having a BT headset, because you would not have to press on the headset button. However, this does not work. Is there a setting in the registry to make this work?

press the green phone button then go into tools>options
then click on the more tab and youll see Automatic pickup
if not on your wm2003 then get a registry editor and go to:
HKEY_CURRENT_USER>ControlPanel>AutoPickup
change the Auto Pickups value from 0 to 1
and Ring to what ever you want (mines set to 3)
hope this helps u
gaz

Thanks for your advice. I already performed the actions and in the registry it is all set. However, on my XDA II it does'nt work. I also tried to use the wired headset, because I know from my regular phone that there it only works when you have the headset attached, but nothing , nada.
Any other suggestion?

aint got a clue then mate sorry

As far as I know this option has never worked, its a OS bug.....
It didn't work on my XDA with 2002 and 2003, and it doesn't work on my MDA II with the latest MDA update. Maybe somebody has worked out this thing, in that case I would be very happy to hear about it because I agree, it's a shame we cannot use it.

It seems that an auto pickup is possible ONLY if the wired earphones are plugged in. So maybe it's possible to simulate such situation with some kind of software, or registry changes, but without swiching off the phone speaker and microphone?

O2 XDA II delay on answer before voice is connected

Does anyone else have this problem? I answer the call by pressing green handset button but the calling party and myself cannot hear each other for about 3 to 4 seconds....
I ahve ahd some callers who were about to give up just as we were evntualy able to talk. If this is a fault, then I need to get it looked at under warranty.
:?:

bakerk said:
I answer the call by pressing green handset button but the calling party and myself cannot hear each other for about 3 to 4 seconds....
Click to expand...
Click to collapse
Long shot, I know, but - do you have Towa's Bluetooth Tools installed? They can cause such behaviour.
Cheers
Daniel

I have the same issue, the work around is not to answer until the third ring!
The problem only occured for me after loading imates 1.72 rom on my XDAII
ta
Christian

I did have pocket bluetooth tools installed and have now uninstalled it.
I had it installed because it turns on bluetooth on an incoming call and is handy when using the Jabra 250.
However it follows that maybe the delay is causd by this very switching on of BT so I'll report back when it's had a good testing.
The ROM I am running is not the newest one quoted in the second reply and if this is a side effect of installing that rom then I will stay as I am...boy does that delay bug me
thnx all
:roll:

Ok all...problem solved...it was the bluetooth tolls that cause it...uninsatlled ans now no delay.
Thanks all for your help :lol:

I also experience delay, but i cannot uninstall pocket bloutooth tools because then my BT GPS won't work anymore
Is there a way to disable this headset functionality in pocket bluetooth tools because i don't need it, I only need com port for BT GPS... Is there any alternative solution for MDA-II ?
Tnx in advance,
Davor

Bluetooth car kit and voice dialling question

Does anyone here use their MS Mobile 2003 “smart” phone with a Bluetooth car kit?
I wonder if you can help me…
With my old Nokia phone, it used to activate the connection to the car kit when I turned on the engine.
However, on the MDA Compact, I have to go to Bluetooth, select the car kit, and select “Set as Hands-free” every time I get into the car, witch is rather annoying.
Does anyone know how to make this automatic? Is there a third party utility perhaps that would monitor the availability of the car kit every so often, and connect to it automatically when it is available?
And another question, does anyone know of a good utility for voice dialling?
I tried Microsoft Voice Command 1.5, it is alright, more or less (apart from awful recognition of spoken numbers, even if spoken by upper class English people) it does recognise the contact names, witch is all that I need - however, I cannot get it to react when I press the action button on the car kit.
I still have to take the phone out of my briefcase, and hold it in my hand, witch is illegal whilst driving.
My dream application, would be something basic, that I can train for certain contacts that I call regularly (like with my old nokia phone, which appeal glows by the minute) – as this way, thick eastern European accents do not matter ;-)
Thanks in advance for any pointers!

I have the MDA Compact Working with the CK7W form Nokia.
Works good exept the voice dailing, You can thakeand disconnect a call with the remote controle.

But do you have to manualy connect to the car kit every time you get into the car?
Once it is connected, I can accept and end calls using the action button. so that is not a problem

No just hold the center button of the remote for 2 seconds, than it will connetct again

tbouman said:
I have the MDA Compact Working with the CK7W form Nokia.
Works good exept the voice dailing, You can thakeand disconnect a call with the remote controle.
Click to expand...
Click to collapse
Hold on a minute, I have the same Nokia car kit, and my Compact when connected suffers badly with reported echoes at their end, not mine.
Do you have this problem?
I was to believe that this was a common problem not resolved yet!
Mike.

I'm gonna test this tomorrow in my shop, I will place a list with phones(other than Nokia) that will work with the CK7W[/quote]

My car kit is CK-1W
I am generaly happy with it, apart from the fact that on the MDA I have to manualy connect every time I get into the car.
I used it with many different phones, and it works fine.
so I think that it is the bluetooth manager of the MDA that is to blame.
my compaq Ipaw bluetooth manager was the best!
but this one, I cannot even get the activesync to work...

For the manual connect you have 2 blame the BT manager in w2003se.
I have good results with:
Nokia CK7W:
Qtek 9090
Qtek S100
Sony Ericsson P910(I)
Sony Ericsson P700i
Samsung D500
HP6340

Are there alternative bluetooth managers?
or a reg. hack I can implement?
thanks

Hmmm, I Don't know...Anyone?

Apparently not…

I had the same problems with my mr handsfree genius car kit, and i thought it was the fault of the car kit.
Just upgrade your rom to 1.06 and all your problems will disappear most likely.
Which rom do you have?
Andre

I have an old ROM.
however, all my atempts at upgrading it failed.
my device ID is something like TMOB-005, not 001
cracked update exe file did not help, running the scripts to modify the ROM files did not help...
in the end I felt inept, and gave up ;-)

TyTN with bluetoooth headset: voice speed dial wont work

PROFS OF THE XDA-WORLD, PLEASE HEEEEEEEEEEEEEEEEELP!
i have my htc tytn since 2 weeks. i connected my Samsung WEP-150 bluetooth headset (worked previously with Samsung tels, and qtek 9100). Now the issue is: after hard reset the headset works properly: push-beep-i say the name-he says the name and calls. And this is the last time it works until the next hard reset. The issu comes up with Nokia BH-200 headset too. The unit opens the audio gateway (can hear the noice), but closes it immediately, so i cant hear the beep, and say the name into the headset. If the unit is in my pocket, i cant say the name loud enough!
What i allready tried:
-upgrade to ext 106
-upgrade to jasjam 1.20...
-and with the original (ext 105) firmware the bttoggle prog.
The bttoggle (i red about it here) is a funny prog. Everybody wants to listen music on his unit, but i just wanted to use as designed. If i run the bttoggle 2 times (first is audio gateway on, second switches back to voice speed dial), the stuff works till the next softreset (or sometimes it loses the setup in suspend mode too).
Anyway, i think this is not good so.
PLESE HELP ME!!!
thx
peterke
PS: one more question: why is a com port in the headset profile there? is it useful? the dealer told me to switch it of, and only use the handsfree port.

sorry bout ur head set
I bought the same one that was already used but i cant activate it cuz i dont have the code,are they all the same code?were can i get the code to activate it ,do you know?i would appreciate the help if you have it!I know you said it sucks but i would still like to try it!

Disable Bluetooth-initiated redial?

I recently got a Samsung WEP500 to go with my Cingular 8125. It works great except for one problem: The WEP500 only has a single, big multi-function button. Pressing this button just once while the phone is idle will cause the phone to redial the last number. This is a pain because the button is really easy to accidentally activate when putting the earpiece in or when you just have it in your pocket. It's gotten to the point where I'll call my voicemail just to have that as the last dialed number, so I wont pocket-dial someone I know.
Is there a way to disable the redial functionality of a bluetooth hands-free headset? I'm running a pretty stock Cingular build, with the default ROM of 2.0.25.11 for both OS and radio, which is of course WM5.
I'd be most appreciative for any help. Thanks!

+1
Would be nice to leave my BT radio on all the time.

I am also having the same problem with my Bluetooth. Still waiting for a solution.

WEP500
I aslo have same problem.

Have you tried turning the headset off when putting it in your pocket?

I NEED this too. I have the Scala Rider Q2 for my motorcycle and a single press on the button re-dials ther last number I called, whereas if I hold it, it turns on the radio.
I often find myself trying to listen to my music and end up speaking to someone...
Thanks for the idea of calling my voice mail BTW, never thought of that.

I know this is an old thread, but just in case someone is still interested in this, you may try solving it the way i did for my HTC Polaris. I have no idea if Wizard got similar bluetooth stack or even if WM5 got an option to load audio gateway at commands extensions in general, but, well, it worth a try.
http://forum.xda-developers.com/showthread.php?p=5355333#post5355333

Disable Bluetooth-initiated redial.
Hi I´ve tried your cab file om my HTC touch cruise WM6 with a sony-ericson bluetooth headset device but it did´nt work.
Do You have a alternative solution or maybe an updated cabfile?