My K-Jam is connected to my laptop via the USB cable but the K-Jam cannot connect to the internet even though the laptop can. Can anyone help please? I use Active 4.1
i haven't yet done this on the kjam but have on the jam and for that what i did was go to connection settings and where it says "This computer is connected to:" select internet. and i think it should work.
thanks fone_fanatic
It is a little different with the K-Jam but I got it working. The adjustment was needed under Network Cards. So thanks for the steer in the right direction.
terryjbennett said:
My K-Jam is connected to my laptop via the USB cable but the K-Jam cannot connect to the internet even though the laptop can. Can anyone help please? I use Active 4.1
Click to expand...
Click to collapse
Go to Setting --> Connection -->Advance--->Select Network.
Choose [My Work Network ] instead of My ISP.
It should now work.
Thanks to you too waiho. Between yourself and fone_fanatic I got it working.
Related
I am trying to configure my XDA2 to connect to my PC and surf the internet via a BT connection. I can Sync via BT but when I try to set up my connection it keeps asking for a phone number despite me saying it is over a Bluetooth connection and my IP is broadband. Sorry if this has been asked but I did search for any info on this.
thomo said:
I am trying to configure my XDA2 to connect to my PC and surf the internet via a BT connection. I can Sync via BT but when I try to set up my connection it keeps asking for a phone number despite me saying it is over a Bluetooth connection and my IP is broadband. Sorry if this has been asked but I did search for any info on this.
Click to expand...
Click to collapse
Why do you need to setup connection for since it's already connected with ActiveSync via BT? Basically once you get connection between your device & activeSync, that's all the step you did. Unless a firewall has stopped your device from accessing to the internet; if it's the case, create exception for your activeSync, and retry browsing with your device.
hope this helps.
regards.
thanks for yor reply, Each time I try to connect the the interneet on my device it keeps trying to connect via GPRS and not through my PC via BT....
Go to ActiveSync, open the options menu & go to Rules tab.
At the bottom, you will find Pass Through Conenction, make sure its set to The Internet and not Work
Cheeeers 8)
thats it, it finally works. Thanks very much.
Glad to hear that, thomo
You're welcome anytime, dude :wink:
activesync through bt
go to setup in bluetooth and select the activesync in bt
pair the pda or ppc
give password
in wm2005 select activesync through the bt
brouse internet
i did myself
I'm having a similar problem and have effected the setting as above, however IE on my IIs says "the page you are looking for cannot be found". My computer connects fine and I have the same issue when trying to connect the device via WiLan, although I do connect to the network.
I've been trying to fiddle with the settings for a few days now but no success...anyone out there got any ideas.
Many thanks
I have mastered it now, I sync using BT on my device, leave it connetced, close Active sync on my XDA 11, Click on IE and the device connects through my PC, super duper.........
Thanks, this is what i am looking for now. I will try it
i can now only online with cable, not through Bluetooth connection
go into the advantage settings for connections
there you should be able to change the network back to my isp insted
of my network
bluetooth-internet
Hai...iam new here..i have got O2mini and would like to connect to internet via bluetooth...
i try using usb cable and activesync program to serve internet and its working.
...i succesfully connect my pc and ppc via bluetooth by using ppc activesync but when try connet to internet its still go to gprs..
pls help me...TQ
like i said again and again in this thread it's all about which network is picked in advantage settings under network connections in systems
I also tried to make a connection to the internet with activesync and usb. But with my mda doesn't work. iexplorer says the page you are looking for cannot be found. But my ppc says "connectivity the internet Pc connection". What are the settings on your ppc, so i can check?
Somebody help me.
test with ping
and maybe messenger to see if it's a dns issue
and if people use pocketplus they prob should make sure that it's not set to close insted of minimizing otherwise the connection would most likely be closed when they close activesync
Thank you very much. You solved my problem.
ezzkht said:
Go to ActiveSync, open the options menu & go to Rules tab.
At the bottom, you will find Pass Through Conenction, make sure its set to The Internet and not Work
Cheeeers 8)
Click to expand...
Click to collapse
i'm very new to this kind of stuff so can someone plz tell me if i can use the wifi feature on my qtek to pick up a wireless internet connection and have the phone connected to the computer through activesync simultaneously? cus i can't seem to make it work. everytime i try to connect the phone to the computer through activesync after i have had the wireless internet connected, the activesync seems to disconnect me from the wireless connection. so im just wondering if i can connect those 2 connections at the same time or not?
no you can't, sorry
Activesync tears down the wifi connection and builds a new conection using you PCs networking. You can still access the intenet through you PC though.
thanks
thanks for the quick reply. yeah i know i can access the internet through PC connection but the problem is that my wireless adapter is broken so i want to have my qtek pick up the internet and then use activesync to transfer the internet connection back to my computer so i can go online on my PC, thats all. so there is no way we can work it around huh?
Topic
i tried searching, but i get too much junk in the search.
when i connect using wifi, my connection keeps getting dropped, so is there a way to do it with USB?
thanks
Yes, AS by default shares the Internet connection of the desktop.
but its not working for me, i can't connect to aim with it or use PIE.
thanks
probably have to turn your proxy setting off.
how do i turn off proxy?
everytime i plug into active sync my phone gets an error like, ip address no defined or something.
thanks
I have the same problem is there a solution?
Please help?
Any fix for USB internet connection failure?
nicosomers said:
I have the same problem is there a solution?
Please help?
Click to expand...
Click to collapse
I think it is quite a common problem, come on guys can we get a fix for this?
Some of my data for you to consider:
Desktop PC connected directly to a router, Wizard, Prophet & Blue Angel all connect to internet via usb.
Laptop wirelessly connected to the same router none of the PDA's connect.
Laptop connected wirelessly to a different router (at work) again none of the PDA's connect.
Is it something to do with a wireless protocol?
Laptop and Desktop have slighlty different frewall software but I think I disabled it all on the laptop & still no joy.
Anyone able to use USB and wireless connection to connect to the internet?
I did see a registry hack offered by Dell, it relates to 'LS???' or something, tried it, no joy.
Any suggestions?
Try bluetooth ActiveSync instead of USB
Not really a fix for the USB problem but I can now do ActiveSync and browse the net together.
I have had a bluetooth dongle for the laptop for 'years' but never used it with the PDA. After some trial & error (about 45 minutes, not bad for me) I can now do ActiveSync with Bluetooth AND have access to the net THROUGH the laptop.
Speed is not as good as WiFi but it does work.
I read a tutorial some months ago on MoDaCo about setting up AS with BT. Suggest a search if you can't set it up by trial & error.
Hi,
This might be a silly question, but I was just wondering if it is possible to use the internet connection on a PC if the hermes was connected to it via USB?
I dont have wifi and my PC connects directly to the internet, is there anyway the Hermes can access this connection?
J'
Right now I am using my ATT8525 as my modem.
It took me a long time to get it but I'm still not sure how I excatly what settings I did.
One thing is ""Internet Sharing"
Find that and setup for USB and then connect. Your computer might see the connection and go from there.
Wish I could help more...
It should work automatically when your Tytn is connected via ActiveSync and your desktop computer has internet. No further configuration should be necessary on default. Just open the Tytn's IE and try it out ...
Oh my bad... I got the question backwards
OK, I have a jasjam with all the factory provider settings for internet. All works well. But how do I connect to a laptop and use the jasjam's internet on the laptop?
My moto has phone tools that does this. But I wanna do it with my jasjam... Help anyone?
argentocruz said:
OK, I have a jasjam with all the factory provider settings for internet. All works well. But how do I connect to a laptop and use the jasjam's internet on the laptop?
My moto has phone tools that does this. But I wanna do it with my jasjam... Help anyone?
Click to expand...
Click to collapse
Yeah it's fairly simple. Make sure Activesync 4.5 is installed on your laptop (don't know if you need it if you use Vista)
Connect your laptop to the device with USB cable.
On your device start Internet Sharing (if it doesn't have it then you will need to install a ROM that does... pretty much all cooked ROMS do)
Then click connect... give it a few seconds and you should be able to connect to internet via your phone's internet connection
You can also do this via bluetooth. First go to Internet Sharing and instead of USB select 'Bluetooth PAN' in the drop down box
Click connect...
Then only your Laptop in Control Panel> Networks tell it to connect to Bluetooth Pan and you should be done.
You can even do this via Wifi but you need to get commerical software called WMWifiRouter
Cheers. I found that the bluetooth I was using was a little complicated. Ended up using an older stick and it works great. Thanks.