I was trying to view files directly from my pc insted of me saving them to my sd card and then c them..i tired a few methods b4 in which i failed..but i installed the bluesoiel drivers for ppc and they work perfectly..but i am not able to get the pan thing working..can some one gimme a guide or guide me on how to do that pls??Thnx in advance
Any1 has any idea???any1 tirewd pan b4??and worked on theirs??
The bluetooth patch that you can find in another thread supports the FTP profile. Is that what you're looking for?
I have successfull PAN with my pc and magician. Just use bluesoleil stack both for ppc and desktop pc. It works ok the only problem I have is that I cannot surf the internet via PAN. Any help appreciated.
Oh by the way in order to make desktop pc folders visible to ppc apart from "sharing" them you should use one of the following programs: PocketLAN, or netuse. You can try the above progs without installing bluesoleil stack fro pc, give it a try.
elefas said:
I have successfull PAN with my pc and magician. Just use bluesoleil stack both for ppc and desktop pc. It works ok the only problem I have is that I cannot surf the internet via PAN. Any help appreciated.
Click to expand...
Click to collapse
surf the internet via PAN:
1) Go to "Network Connections" folder on your PC
2) Right click on your internet connection (not bluetooth!).
3) Click "Properties"
4) Go to "Advanced" tab
5) check "Allow other network users to connect...."
thanks truedim, I have already done this. It is not working though.
Dandie said:
The bluetooth patch that you can find in another thread supports the FTP profile. Is that what you're looking for?
Click to expand...
Click to collapse
Hmm..yes i am looking for that.
Related
well since i can have msn, internet and terminal services via bluetooth and activesync why the hell can't i have network ?? here is the good news !you can have network via ftp and resco explorer ! install IIS and the ftp protocol. configure ftp to a folder or partiton. On resco make a new ftp session, configure it and voila !
will this work over wifi?
will this work over wifi?
this works over bluetooth, by wifi it's more simple, you just have to configure the wireless and browse the network normally, you woun't need ftp
my badm, i meant for ad hoc device to device connections, (jam 2 jam)
i think not !
Re: network by bluetooth is possible with MS stack !! sort o
adolfotregosa said:
well since i can have msn, internet and terminal services via bluetooth and activesync why the hell can't i have network ?? here is the good news !you can have network via ftp and resco explorer ! install IIS and the ftp protocol. configure ftp to a folder or partiton. On resco make a new ftp session, configure it and voila !
Click to expand...
Click to collapse
I suppose I'm a noob at this. I really want to get this to work, because although I like the Bluesoleil stack it doesn't support certain headphones. But PAN works great on it...
I've installed MS IIS and the ftp protocol on my PC but don't know what to do. I have 3 networked drives, namely \\ads-1\d, \\ads-1\e and \\ads-1\f.
Please explain how I set up IIS to point to these drives. Or is there a site that can walk me through it? Many thanks!
I cant get into Internet via bluetooth connection after I upgrade ROM to v12.
does anybody have the same problems?
I can report that I didn't have problems, but setting it up was a pain in the ass.
Someone else has asked the question, and I wrote a walkthrough on how it was resolved...
V
vijay555 said:
I can report that I didn't have problems, but setting it up was a pain in the ass.
Someone else has asked the question, and I wrote a walkthrough on how it was resolved...
V
Click to expand...
Click to collapse
Vijay, can you let me have this walkthrough?
Cheers
pvb
Yeah. I wanted it also.!!
Since vijay555 probably busy w/ his wedding, let me try to help here:
1. On the PC side, make sure "Allow connections to one of the following:" is checked on ActiveSync's connection setting, and the right Com number is selected. (I assumed it's done since U could connect before)
On yr PPC:
2. Start > Setting > System > Bluetooth Setting, check everything and click "start" on ActiveSync Bluetooth setting.
3. Step 2 should bring up the other bluetooth setting page, click device, and add yr PC as a new device.
4. After finish the adding, start ActiveSync on yr PPC, click "Tools" > use bluetooth connection.
5. If U could activesync w/ BT, then U should be able to browse internet too.
OR you could remove that crappy bt stack and replace with one of your own favorites
i use toshiba stack + widcomm on my pc, works like a charm....not able to bluejack anymore :'(
Hi,
Can anyone tell me if it possible to browse my wifi connected Wizard (O2 mini S - latest O2 ROM) from my PC...
Ie i would like to be able to open window to my documents on my phone on my PC to copy file etc...
Thanks in advance!
Yes, but you will need some third party software, such as Resco Explorer, to 'map' the folders you want to access across the network.
Thanks for your quick reply, however i meant if/how is it possible to browse the files on the wizard from the PC over wifi network, not the other way around.
Cheers
lo thought i would try helping.
if you downgrade your active sync on your pc 2 or 3 releases it supports syncing via wifi.... the newer ones it was disabled on for some daft reason.
it may be enabled on the new beta version i dunno.
anyway if your pc was synced to it you certainly can view the my documents folder. also by bluetooth in any version of active sync, just need a bluetooth dongle for ur comp.
hopw that helps
I don't think you can downgrade with WM5, I believe that you need Active Sync 4.1 and above.
I can't think of a way to browse the PPC on a wireless network which is a good thing for security.
hi, have you tried pocket controller? you can control your ppc from the pc via wifi.
tbito said:
hi, have you tried pocket controller? you can control your ppc from the pc via wifi.
Click to expand...
Click to collapse
Excellent, thankyou for pointing me in this direction, it does exactley what i want (and a bit more!)
Cheers,
Bachy
use activesync when your connected via usb? you can browse the files
Hi, I've enabled an ActiveSync connection with my Trinity and my computer via bluetooth..
What I really want though is to have it connect automatically once I'm within range and everything is on, how would I do this?
Thanks for any help!
Hi, How did you manage to sync via Bluetooth.
Thanks
Haven't done this yet, I need to buy a dongle... but according to the info I've read you need to setup a pan service that is the equivilent of a wifi ad hoc connection...
smalley83 said:
Hi, How did you manage to sync via Bluetooth.
Thanks
Click to expand...
Click to collapse
Search the forums.
PAN service...I'll give it a go..
Question for El_Mariachi
So, you have your PPC rigged up to sync through bluetooth each time you put it in the cradle? That's my goal, but I'm having some trouble you might be able to help with.
Here's my situation:
- PC and PPC are paired
- Sync is possible through bluetooth manually
- In the Activesync program on the PPC I go to Menu>Connections>
The "Synchronize all PCs using this connection:" box is ticked
However, the drop down list of options only contains "`USB" and nothing else
If it isn't too much trouble, could you check your registry here:
HKCU>ControlPanel>Comm
And please list all the values under that Key?
I really appreciate it.
Apparently you have to sync manually there is no other way. I'm not sure how to check the registry but let me know and I'll be happy to post the values
In terms of syncing...
Pair your PPC with your PC
Enable an incoming COM Port from your PC via bluetooth
In AS on your PC, allow connections through that COM Port
On your PPC, in AS, select connect via Bluetooth, select your PC, ActiveSync should appear and check the box.
Then connect via bluetooth again and it should work!
Exporting regsitry keys
If you have a registry editor installed, it should be easy. If you don't have a registry editor installed, and you don't really want to install one I will understand. On the other hand, if you don't mind then a popular freeware is fdcsoft's task manager http://forum.xda-developers.com/attachment.php?attachmentid=32913&d=1168267333
Once installed, open the program and find the regedit tab. Open HKEYCurrentUser>Comm>Rasbook (see Rasbook location attachment for a pic) and look and see if there isn't a key called Bluetooth, or perhaps `Bluetooth. If there is, then tap and hold that key and select Export. (See Bluetooth Export attachment for another pic) If you zip and attach that file then I can download it and see if it works on my PPC.
Again, if this is too much hassle then it's cool, but it might really help me out. Thanks.
John
Is it possible to have a shared folder on the trinity, so I can acces it from my pc in lan? And is it possible to print documents, through a shared printer, directly from trinity?
Thanks.
No answers?
May find your answer here
And google redirects me here
zooster said:
Is it possible to have a shared folder on the trinity, so I can acces it from my pc in lan? And is it possible to print documents, through a shared printer, directly from trinity?
Thanks.
Click to expand...
Click to collapse
I did sharing but not thru tcp/ip but with bt ftp service
I am also interested in printing thru trinity or wm6 if there's any freeware.
nichri said:
I did sharing but not thru tcp/ip but with bt ftp service
I am also interested in printing thru trinity or wm6 if there's any freeware.
Click to expand...
Click to collapse
Can you tell me how u did thru ftp?
http://pocketpccentral.net/software/printing.htm
http://www.resco.net/pocketpc/explorer/ (can map network drives)
Surur
surur said:
http://pocketpccentral.net/software/printing.htm
http://www.resco.net/pocketpc/explorer/ (can map network drives)
Surur
Click to expand...
Click to collapse
Thank you very much, but the problem is that the printer is not directly on the lan but shared through a pc in lan, I dunno whether those programs allow it...
ftp thru BT
zooster said:
Can you tell me how u did thru ftp?
Click to expand...
Click to collapse
First of all I am using Karmba rom.
to use Bluetooth ftp I followed the steps below:
1. Open commManager
2. Click on Settings then Bluetooth
3. On the last tab of the next screen you will see 'FTP'
4. Click on ftp and then enable both options i.e. 'Bluetooth Explorer' and 'File Sharing'.
5. Select which folder will share as ftp, i.e. I chose the whole SD card folder.
6. Don't forget to set your trinity to 'discoverable mode i.e. 'Make this device visible to other devices' - you can find it in the 'Mode' tab.
7. When you browse with your laptop and and find your trinity, you will see that under services there's an ftp service.
good luck