Hey Guys,
I just upgraded my Vario to the new ROM just released by T-Mobile. However, each time after I perform a soft reset, I need to manually tell it to connect to T-Mobile US. Any thoughts on how I set this to automatically detect?
Alex
If you already created GPRS connection, set
HKLM\Comm\ConnMgr\Providers\{7C4B7A3 8-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\(GPRS connection name)\AlwaysOn
to 1
Related
Hi,
I would need a little help to configure this GPRS connection.
I have all the parameters but it only accept to connect to GPRS then, I cannot browse at all.
I have installed Pocketcmd and Nettools and I don't resolve anything.
Thanks for your help
Hi me,
SFR just told me it was because of my SIM card that is too old (1999)... I have just realized that I have this number for more than 6 years (started in 1997....)
Well, they send me a new SIM and I'll be able to surf.
Thanks me for the answer and for my help
Hello Murcielago,
Sorry about reopening this post, but when you received your new SIM, was the network configuration automatically "imported" from it ? How was the procedure performed by you to set it ?
I'm asking it because since I installed a new ROM to my Pocket PC, I was able to set the network configuration but I couldn't use any GPRS traffic monitor software (and my guess it's because before I did the upgrade, there were a few "hidden" networks that Efficasoft software listed and these networks have just gone...)
Thank you!
Fabio.
Hi!
Thanks to all of your help I have finally been able to config my XDAII to work as a modem and connect to GPRS network both through IR and USB!
But last night there was a problem with the network which admitted that GPRS was down for an indefinite amount of time... so I need to connect using my XDAII as a "normal" non GPRS phone to connect to an ISP...
Has anyone done it and can tell me how to change the setting or how to set up a new connection to use XDAII as a modem?
Thank you,
Chris
Hi
I apologise in advance because I'm sure my problem is simply solved but I;ve not used the XDa for a while and I'm back to square 1. I have tried searching for the anser but I think my question is just to basic.
My XDA2 is unlocked and I use a T-Mobile sim in it. The problem I have is with the TOMTOM. When i try to update traffic info on the fly I get a message saying modem hung up (or something similar). It works fine when connecting via the cradle and my PC.
Now I think this is because the XDA2 is trying to connect using the O2 settings when I am on the road.
So my question is how do enter and then I get the XDA2 to use the T-Mobile settings?
EDIT: Sorry forgot to say so far I have done the following:
Start
settings
connections
Add new modem connection
enrtered T-Mobile
selected cellular line (GPRS)
entered access point as general.t-mobile.uk
user name as user
password as wap
Ok and update
seems it is connecting after all. Problem is I have to connect via GPRS first then up date the traffic. It's not picking up the connection if I just update direct from TomTom
any ideas?
I don't think you can do much about that, cause the tomtom, must automatically try to establish the GPRS connection.. like Internet Explorer does, it automatically checks if you have GPRS or Wi-fi connection, if not connected for you automatically. after reading your post. it does not start your GPRS connection, have you look into the settings of the tomtom, to see if he has an option that you can let it connect through your GPRS automatically?
My Phone: HTC TytN (Vodafone 1605 VPA Compact III).
I am new here and have 3 questions:
1. If i turn on WiFi and see the connection to my wireless network it still wants to connect to the internet through GPRS. Is there a setting or an order wich setting to use ?
2. My phone connects to my exchange server to get my mail automatically despite the fact that I is set to manualy. Then it keeps the GPRS connection open. I want to get may mail manually and not automatic ?
3. My phone is HSDPA prepared but it's not enabled. How do I enable this and keep it enabled also after a soft reboot or setting the device off and on again.
Thanks for your info .
hi, i just got a t-mobile MDA vario. its working arite on my operator but the only problem im facing is that it doesnt connects with my operator's GPRS. ive tried using another operator but still im unable to connect or browse thru it. Their CSR told me to get it reinstalled with an i-mate kjam configurations.
can sumbody help me out with it???
tx
Since you say T-mobile MDA vario i am assuming your using T-mobile Uk, all you need to do is create a new connection and enter general.t-mobile.uk as ur APN and then connect, no other settings needed. leave the username and password blank...
Start>Settings>Connections>Connections> Add a new modem connection (under my isp)> type in a connection name e.g My Connection select Cellular line (GPRS) as your modem> type the apn > blank username and pass> click connect and your done!!
hope that helps !
hey thx for the reply buddy, although i have a t-mobile mda vario but as i mentioned that im not using t-mobile services. I'm not even in uk is there any possibility that the gprs in this one is only compatible with t-mobile??? or is there anyother solution?
look on the ftp maybe for the extended roms of the imate or you can go online and lookup the settings that you would put into the connection part of the phone in the control panel.
who is your provider
Try hard resetting the device and try to connect again.
This has worked for me in the past when I had problems connecting.
im in pakistan. and i've configured my handset according to their settings but it's isnt working. i've checked with another operator but its of no use either.
can you please pass me the ftp link???
hard resetting goes like???
im a newbie
ok im done with the hard resetting, but its of no use in this case. where can i get ROM for its imate equivalent??
what if i have t-mobile mda in us what apn would i put?
knock knock... can somebody throw some light n help me out of it