Hi, I was trying to backup my device, as I have already done hard reset few times already and didn't want to have to install everything again each time I hard reset!
There don't seem to be an option, like it was on the Jam to backup device.
I did search guys but had no luck!
try sunnysoft backup manager 3.7 or spritebackup wm5 beta version but they have many bugs.............there isn't any way at the moment
You can try SK Tools, it has backup option and lot more...
s-k-tools.com
Related
Oh wise ones of the forum can you answer this question for me.
After reading through the forums many of you recomend Sprite Backup rather that using the supplied X Backup.
I have purchased Sprite backup now here's my problem.
I have done a backup using Sprite
If i have to do a hard reset will the sprite backup program be there so i can restore? like X Backup is, in the rom?
If not what do you sugest ?
heard that spirite can backup to the sd card as an exe file in which case you can just run that to restore
or if you have access to the cab file for spirite backup you can put it in the extented rom and it will auto install at hardreset time
I can confirm that Rudegar is correct; Sprite Backup allows you to create self-restoring backups. Keep one of these on your SD card and you can always resotore your device with data & programs after a hard reset.
Works very well for me.
PeterH
XDA II
Does it create the self exe backup atomaticly or do i have to change a setting can't seem to find a setting for it .
THE BEST IS X_BACKUP
hi friends... i have very carefully evaluated both the software and i can bet it with u all that xbackup makes a more complete and fool proof backup than sprite...
a major problem u will some times face after restoring with sprite is that ur sent msgs will no longr be showing in the sent msg folder!!!
i have had it tried it with many xda IIs owners!
FOZZER said:
Does it create the self exe backup atomaticly or do i have to change a setting can't seem to find a setting for it .
Click to expand...
Click to collapse
no, you need to select, options,swich to advanced mode,options,backup options,general back up options,and tick the create self-restoring backup files
hope this helps.
My PDA2K came with a backup program...albeit not a great one, but then I put Sprite on a bit later. I just found that Sprite won't work on the KJam (per Sprite Software) and I can't find a program on he KJam that will do backups...so how do you do one???
Thanks,
Tom
I don't there is anything out there that can backup wizard...
I'm using Sunnysoft backup manager and it works pretty good. After making the back-up I keep a copy of that as well as the programs .cab file on my mini sd card, so I can do a hard reset and restore even if i'm not near my computer. BeyondTheTech talked about it on his blog a while back. At that time I beleive he said it was the only back-up software working on WM5.
http://www.beyondthetech.com/blogs/kjam/
But PIM restore doesn'n work correct. So only new sync can resolve a problem
I am looking for a good backup software to save all the files and configuration between Hard Resets or ROM Upgrades, for Windows Mobile 5, thanks
I've seen several people on here recommend Sunnysoft Backup Manager. I've just now downloaded the trial, so I haven't had a cance to try it yet, but it does look to be very configurable. Since there's a free trial (14 days) give it a shot and see if it fits your needs.
http://www.sunnysoft.cz/en_clanek.php?clanekid=51
I have tested the Sunnysoft Backup Manager. It does backup and restore my Wizard, but only for files and programs. All my PIM data are lost. :?
BTW, The "Data Backup" program seems to work in the Dell x51v WM5.0 machine. Could anyone extract it from x51v and try if it work in HTC Universal or Wizard? :?:
kelford said:
I've seen several people on here recommend Sunnysoft Backup Manager. I've just now downloaded the trial, so I haven't had a cance to try it yet, but it does look to be very configurable. Since there's a free trial (14 days) give it a shot and see if it fits your needs.
http://www.sunnysoft.cz/en_clanek.php?clanekid=51
Click to expand...
Click to collapse
if you rename the file pim.vol (located in the root directory) to something like pim.vol.old and then do a soft reset and then start the restore, your pim data will be restored too.
Wolfgang
Yeah. Your idea works! It works even I just rename the pim.vol and start restore without soft reset.
Thanks a lot.
woschirmer said:
if you rename the file pim.vol (located in the root directory) to something like pim.vol.old and then do a soft reset and then start the restore, your pim data will be restored too.
Wolfgang
Click to expand...
Click to collapse
Sorry,
but why should the software backup my PIM-data ?
Just do a sync .. and they are there.
- Superbowl
Superbowl,
I don't trust outlook and otoh I'm on the road a lot of times without any chance to sync my data. So a local backup/copy is very helpful.
I had already some hardresets (not with the MDA Pro, but with other devices) without knowing where they came from and I was really happy to be able to restore my device in the hotel.
Wolfgang
but the "other devices" were doing a hard reset everytime u were running out of batteries, that s why it was usefull to have the contacts saved too.
Now this does not apply anymore.
I would need to restore my Data only after Rom upgrades, which i would prefer doing it on my home computer.(which has the contacts synchronized in outlook).
backup software
I am using sprite backup for a long time and it is amazing. I believe it is far better than the sunnysoft. At least 4-5 times faster.
It is reliable and restoring the state % 100. Morover scheduled or battery level dependant backups are available, too.
From Sprite Backup Website :
http://www.spritesoftware.com/en/personal/products/windows_mobile/pocket_pc.htm
"Windows Mobile 2005 devices cannot use Sprite Backup. We will be releasing a new version that will be compatible with these devices in the near future. Please keep visiting this site for updates. "
I missed WM 2005 part !!!
Well, finally I tried the (official) upgrade from WM5 (1.8.407.1) to WM6.
I found detailed instructions using SpriteBackup 3.14 or higher. And since Version 5.01 were deliverd with my Herald, I gave it a try!
But that's were this endless night began...
The instructions used "GetUpgradeData.exe" from Sprite Software.
This is what I did:
- I created a complete Backup with Sprite Backup 5.01.
- I did a hard-reset.
- I run the "GetUpgradeData.exe" and got a sbu-file I stored.
- I actually performed the ROM-upgrade
- I installed Sprite Backup.
But wenn I tried to restore the Backup I made earlier I didn't found the "Upgrade-Mode" that was mentioned in the instructions and which I created the sbu-file for.
On the Sprite-Homepage, I got the information, that this functions seems to exist only since 5.1!
So I installed the newest version as trial. But this damn software doesn't restore backup made with older versions of itself! :-O
Since I found no possibility to makes Sprite Backup 6 *do* this, I decided to give 5.01 a try nevertheless. But it didn't work. I actually can't remember anymore, what error came exactly in this situation, but I realized it would work.
Since then I look for a downgrade to restore my backup on good old WM5.0 and try the whole szenario with Sprite 5.1 (I don't like 6).
I actually *found* a WM5-ROM, but it's not 1.8.407.1, it's 5.4.407.1.
- I "updated" the ROM, WM5 runs fine.
- I installed Sprite 5.01.
- I run Sprite 5.01 and got an error mentioning to little free memory!
- I performed a hard-reset, installed Sprite and tried to restore selected parts of the backup to need less memory. It ends successful, but during the following Warm-Start I get repeatetly the error that "The last cold-start" wasn't complete. So it performs a new reset by itself.
And that *are* my possibilities:
- restore all and have to little memory
or
- restore parts an get this weird error.
Why is this? and How can I change it?
I still have the hope that a 1.8.407.1-ROM would fix all problems. But where to take from. :-((
Any ideas how I can save my Herald? Please? It's 7am now an I'm puzzeling for 5 hours now. I want everything back to normal! :-(
Thanks for every help you can give me...
I didn´t really read the howl thread - but
NEVER try to take a WM5 backup to work with a WM6 Rom!!!
You never treid to use a Windows 95 backup on a Windows Vista PC???
So why you wanne restore a backup from a complete different Rom??
Install all new. NEVER use a backup when flashing a new rom.
Just my 2 cents
papamopps said:
I didn´t really read the howl thread
Click to expand...
Click to collapse
No matter. It's just one posting. ;-)
NEVER try to take a WM5 backup to work with a WM6 Rom!!!
[...]
Just my 2 cents
Click to expand...
Click to collapse
Well, my two, too, until yesterdey, when I learnd about that option in Sprite Backup. I quote from the manual of "Sprite Backup 6":
http://www.spritesoftware.com/downloads/SpriteBackupHelp.pdf said:
Setting Upgrade Mode Options
Sprite Backup automatically detects if the restore process is being performed between different devices or ROM versions and automatically enables this function and you will be asked to select the type of 'Upgrade Mode' operation you wish to perform.
ROM: Use this option to perform restore operations between the same devices with different ROM revisions. For example: restoring from a KJAM ROM 2.16.9 to a KJAM AKU2 ROM version.
Device: Use this option when you wish to restore across devices and ROM versions. For example: When restoring a backup file created on a WM2005 KJAM device onto a WM 2006 JAZJAR device.
Safe: If your device does not boot after performing a ‘ROM Upgrade’ or ‘Device Upgrade’ restore use the ‘Safe Upgrade’ operation.
Click to expand...
Click to collapse
The problem is that my version of Sprite Backup does not have this capability unexpectetly. Which I realized when it was to late.
one comment of a nearly flashaddict:
i ALLWAYS install all new. it is much faster after a few month when you make a hardreset and flash new......
believe me. i flashed so many roms - and allways installed it completely new!!
Sure you are right. And actually that's my choice now.
I made it to restore at least my personal data in WM5, backed them up new and restorem *them* on new installed WM6.
Now I'm on the configurating, installing, reconstructing part. :-((
Hi all,
i'm planning to do a hard reset of my omnia II but since there is mobile shell and some other programs on it that are not original, i wanna know how to make sure i have a perfect backup of the phone before the reset.
can i make something like an image??
if notwhat will be backupped, and how do i run the backup??
thanks
Try SPB Backup or SPB Clone
did try spb backup, but he allways stops at some percentage...
now i copy all the files on my phone and did hard reset, but it is a hell of a job to put everything back...
will search for spb clone now and try that one
thanks