I have I-mate Jasjar and Jabra Bt 800 handsfree headset, and headsets maximal sound volume is quite low. My problem is that when I start speed voice dial from the headset, this file (i suppose) is played through Jabra BT-800, and the sound is so short and weak that it's very hard to hear if there is any background noise..
I'd like to know how to change either /windows/voicbeep.wav to some longer/more audible wav-file. File is located in ROM, and I can't just remove/replace it. Or is there a way to change the file that is played by speed voice dial?
Best regards, Antti R.
Can you see caller's ID on jabra BT-800 handsfree headset, from I-mate Jasjar ? I am ready to buy Qtek 9000 and I dont know if i can see caller's ID on a bluetooth handsfree headset !!
thnx
Can you see caller's ID on jabra BT-800 handsfree headset, from I-mate Jasjar ? I am ready to buy Qtek 9000 and I dont know if i can see caller's ID on a bluetooth handsfree headset !!
thnx
yes, you can
Caller-ID is displayed in BT 800, not the name from contacts..
I managed to change the Voice speed dial start sound by copying new wav file over \windows\Default.wav, not the voicbeep.wav as I originally expected. I tried with dogbarg.wav, and now I definitely know when say to whom I'm calling to ;^)
That's a useful tip for all headset owners, araappa... Thanks!
araappa said:
wav file over \windows\Default.wav, not the voicbeep.wav as I originally expected.
Click to expand...
Click to collapse
Could someone tell me how to overwrite this file, it tells me its read-only and refuses?
Related
go to hklm\software\oem\voicecommand and set the value of "launchapenable" from 1 to 0
when activating voicedial from your headset (press connect button at the headset 2 sec.) it diverts all audio to the bluetooth.
works also with musik.
pressing the button again it disconnects the bluetooth and the main speakers are active again.
in this case the original voice dial does not work anymore until you change the value back to 1.
for me a good solution because i don't use voice dial and prefer insted skype and headset.
Very good tip...will try that!
Cheers...!
Works on QTEK S100 with Jabra Bt 250 Headsets?
Do you happen to know if the BT specification of the EXEC allows it to transmit stereo audio? Say from a mediaplayer to a BT car kit?
If so, that would send me over the edge and Id have to buy a BT carkit!
...ohh, on 2nd thoughts, it would also depend on the bandwidth too. Anyone know what sort of frequency range BT stereo may be limited to?
for stereo output is another reg.hack needed i think. because pushing the voicedial button at the handset it activates the bluetooth headset profile for listening to the voice but voicedial doesnt start. so you can use it for normal micro and loudspeaker.
maybe anybody knows how to activate in this case the "high quality audio profile" by editing the registry instead of "headset profile"?
Great job, The sound (in music) is good ? i tested this but the sound wasnt good.... I think my headset isnt good for music.
yes it depends on the bluetooth profile. for good quality "high quality audio" (A2DP) profile is needed.
blueangel
would this work on a blueangel running WM5?
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
hdubli said:
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
Click to expand...
Click to collapse
No it does not work in QTEK s100....
Works -but not great
very tinny muffled sound on my moto HT 820, was hoping it would work as well as the bluetooth stack update for the magician.
Sound does come out in both ears on my stereo phones. but I dont desire to listern to the tinny sound.
Still great find and discovery. Just hope someone can progress it to A2DP asap.
sorry, but can anybody tell me how to edit the registry in WM5? I never did it before. What tool do you guys use? Is it something free?
Thanks.
I used PHMREGedit
Here's the link:
http://www.freewareppc.com/utilities/phmregistryeditor.shtml
andyes....it's free.
Tried it with my BT200
I know the registry works....but cannot get it to play on the headset.
It works...becos upon pressing the phone button on the head set for 2 sec, the audio comes from the handset. On redoing it again, the audio goes off from the handset.
Mine is working fine. I really like the way its now.
Thanks a lot.
Ooops....
my Bt200 wasn't working. That's why there was no audio coming from it.
Need to figure out why there is no audio coming from the headset.
Sigh another problem!
So basically, the registry works.
Im using Total Voice COmmander and it works with WMP.. No need to install another software to play music thru BT.
I just press my Jabra headset twice and it goes "Say Command".. then I say "Play a music"..
Sometimes it's stubborn and Calls someone or Says "Today you have no Appointment" but I guess with a lot of practice, my Dopod understood what Im saying and played me a song.. Now, Im having trouble with my Dopod catching the title of the song i want it to play. I've placed voice tags on the songs and 50% of the time, my dopod got it right.. got to work on the other 50% though..
Greetings,
I'm using a Sony Ericsson HBH-DS970 stereo Bluetooth headset with my TyTN and so far I have only one gripe - when the headset is connected, the ring tone somes through the handset only, not the phone itself, which means that I'll miss any incoming calls if I don't have the earbuds inserted.
Also, the ring tone sometimes does not start until about 20 seconds after the display has started to announce the incoming call.
I tend to have the earbuds hanging from my neck if I'm not listening to music, and the ring tone is not loud enough to be heard that way.
I suspect this may be by design, because it's assumed that a stereo Bluetooth headset is always in/on the ears when connected to the phone, but I want to use the 970 as my only headset even when I'm not about to listen to music.
Is there any way to get a ring tone from both headset and phone?
/POL
?
Anyone figure this one out yet? I have the same problem...
same here, anyone find a solution please post, I think I can change it from the registry I will check it.
Can I ask you folks a question relating to the use of the headset Sony Ericsson HBH-DS970 with the HTC Hermes...do you get all the functionality ie caller ID, the ability to accept and reject the call, compatible with mediaplayer etc.
I have a concern that with the headset not being a HTC product, perhaps some of the Sony functionality may not work with the handset.
Thx
From my experience the ringtones will not come to the speaker if you use the headset as wireless stereo. I only use the headset as handsfree, which makes the ringtones go through the phone.
I used the DS970 for two week with my O2 Trion,feature like Caller Display is No any problem,But when using media player sometime it may out of control, like cann't accept call and control volume or stop.
And the sound quality is acceptable,but it will stop few second after 1 or minutes, I have change the regedit.
May I know is there any way to fix it?
Still no solution?
Anyone come up with a solution to this problem? It really bugs me not to get a ringtone from the unit itself, just thru headset... Works just fine with my old mono handsfree, would be great to have it in the stereo heaseat to...
i have the same problem
hello i have the same problem
the ring sound is only on my headset i have tested with 1.13.097fr and now 1.13.234fr if anybody have the ring on the phone with a headset stereo a2dp cang give us is configuration rom and other soft for the bluetooth.
thank and sorry for my english
juste a little frenchy
There seams as if there's no solution in sight, I got the exact same problem, also with HBH-DS970 and with Jetware Mobile's "Hands-free extension" installed.
I'm still running WM5, anyone who have tried WM6?
/Fluff
Same "design feature" here with my HBH-DS970 and HTC S710 WM6 Smartphone, so it's not ROM, device or OS version specific. I would suggest this is by design.
I'm pretty sure this is by design since thats how it works on my BT8010. Its stereo so it seems to make sense all sounds go through headset although it would be nice if it was an option. The BT8010 has a button on the headset to take it out of music mode so then they will go through the phone but I guess that doesn't help any of you out much.
Another option would be to just uncheck wireless stereo in the pairing and just check it back when you want to do wirelss stereo.
Hi all, I have MDA Pro with BT headset Motorola H500. When I have call, the headset just play its built-in ringtone. I have set different tones for some 'important' contact and want to listen to them on BT headset, is there any software or registry tweak can do it? I used MS Voice Command and it direct the ringtone to the BT headset, but using that program was a huge memory consuming and not useful for a non-native speaker like me. Any help would be appreciated.
PS: sorry for my bad English.
Your headset needs to support the handsfree profile not just the headset profile for this to work.
When I tap & hold on the headset icon, there are 'set as hands free' entry, click on it has no effect, anything i can do to activate handsfree? TIA.
Not unless your headset supports it. If it did, you would hear the ringtones.
I am looking at some specs of the headset, it do support both 'headset' and 'hands free' profiles. But I cannot hear the ringtone of MDA Pro just the default ringtone of the headset. Any ideas? Thx.
Hi ,
I know many guys are intesting use VC through bluetooth headset. I found that it can be done in HP6315. Original there is only hands-free/Headset profile for bluetoothn in 6315, the Widcomm BT version is 1.0.0build 3701, the all sounds is from phone to BT headset,the VC dial can be down through BT headset. But the MP3 quality is very poor.
I just upgrade the Widcomm driver to 1.6.0.700, there have another "High quality Audio"profile, so you can use stero BT headset to listen MP3. The quality is good. So if we use SE HBH-ds970 BT headst, we can listen good MP3 and also can dial the number through VC use HBH-ds970. It is very convenience to get both function. When you launch VC, the phone will connect BT handset, the sound is transfer to headset, you can say the number or others instruction by BT headset, when you finish it, the connection between 6315 and BT headset will automatic be active. It will not lost the battery of headset.
Here the question is I 'd like do it in 6515 since I need the mini keyboard and GPS function. 6515 already have "High quality Audio" and "Handsfree/Headset" profile, you can listen good quality music and also can call/answer the calling through BT headset. But it can not use VC, the VC sound is always from phone.
I check the Reg file of them, its are almost same. Unfortunately, I do not have knowledge of Reg file and widcomm stack, can some expert can help me on this?
Thanks in advance!
Regards,
lxy
Could someone share the latest BT drivers for 6515e?
Hi,
I wonder if I could find a good voice dialing software for my iPAQ. Could you please help?
Also, does anyone know the latest BT version post the 1.21 rom?
Thanks and kind regards,
Prankey
Searched the Blackstone forums but did not find any post/thread regarding this particular problem .....
I'm a new Blackstone owner (and a newbie on this forum). Love the device but one major issue I have is that ringtones dont come through via the BT headset. I have assigned different ringtones to people and based on the tone of an incoming call, I should be able to screen calls without looking at the phone ..... or so I thought.
My phone : Blackstone (ROM 1.14.405.X). Dec/7 hotfix from HTC installed (since ROM is older than 1.19)
My BT : Jabra BT3030 stereo headset (AVRCP works fine)
Can anyone please help ?
Thanks !!
Try assigning a long ringtone as there is a lag and this may be cutting off the ringtone
Thanks winwiz. Tried that without luck. I only get the default beep-beep in the BT headset warning me of the incoming call ......
Bump !!
Can anyone of you folks help me with this ?
I tried a few tricks - set a looooong ringtone (2 minute song) ...... selected a single ringtone for all contacts ...... but no luck, still get only beep-beep via the BT stereo headset for incoming calls, while the phone itself plays the correct ringtone.
Funny thing though - music comes through fine on the BT (A2DP works fine) and I'm also able to control music without issues (AVRCP also works fine).
Any help/suggestions are welcome !!
Cheers !!
SLVRstone said:
Bump !!
Can anyone of you folks help me with this ?
I tried a few tricks - set a looooong ringtone (2 minute song) ...... selected a single ringtone for all contacts ...... but no luck, still get only beep-beep via the BT stereo headset for incoming calls, while the phone itself plays the correct ringtone.
Funny thing though - music comes through fine on the BT (A2DP works fine) and I'm also able to control music without issues (AVRCP also works fine).
Any help/suggestions are welcome !!
Cheers !!
Click to expand...
Click to collapse
I'm a little out of touch with the very latest gear - BUT - would the headset output the ringtone?? Surely it just has it's own ringtone that is the only one it can play, whenever a call comes in?
It seems to me that to send the .mp3 file over bluetooth to a device that doesn't seem big enough to have a full codec supply would tax the Bluetooth bandwidth somewhat!
SLVRstone said:
(A2DP works fine)
Click to expand...
Click to collapse
A2DP is used for stereo music, not for talking. Maybe its just not possible (with your headset). But I'm quite unexperienced with bluetooth headsets .
Riceburner said:
I'm a little out of touch with the very latest gear - BUT - would the headset output the ringtone?? Surely it just has it's own ringtone that is the only one it can play, whenever a call comes in?
It seems to me that to send the .mp3 file over bluetooth to a device that doesn't seem big enough to have a full codec supply would tax the Bluetooth bandwidth somewhat!
Click to expand...
Click to collapse
johnpatcher said:
A2DP is used for stereo music, not for talking. Maybe its just not possible (with your headset). But I'm quite unexperienced with bluetooth headsets .
Click to expand...
Click to collapse
Hello Riceburner .... today's Bluetooth headsets do indeed play your phone ringtone. But it should have A2DP feature that allows music to stream in and your phone should also have A2DP to "send" the music to your headset.
The .mp3 file does not get sent to the bluetooth .... the mp3 plays on your phone as a ringtone when you get a call and the A2DP feature then streams it to your BT headset where you then hear the ringtone.
This can have a lag of even a few seconds, hence the suggestion from winwiz a few posts back to use a long playing ringtone.
johnpatcher - A2DP is indeed not for talking, but it is necessary for the ringtone to play in your headset until you answer the call at which time the traditional bluetooth kicks in to handle voice.
Cheers !!
Can anyone help ?
Here is a consolidation of the issue and my attempts to overcome :
My phone : Blackstone (ROM 1.14.405.X). ROM date Oct/24/2008
Any hotfixes : Yes - since ROM is older than 1.19, applied the Dec/7/2008 hotfix from HTC that addresses screen freeze during multi clicks.
My Bluetooth headset : Jabra BT3030 stereo headset (A2DP and AVRCP works fine with the Touch HD phone)
Problem : Phone ringtone does not play through the BT headset. I get only a "beep-beep" on the BT headset for incoming calls, while the phone itself plays the correct ringtone.
Tried the following :
1) set a long ringtone (2 minute long song) as suggested by winwiz. No luck
2) Selected a single ringtone for all contacts. Still no luck
3) Paired the exact same BT headset with another phone (symbian OS) and it works perfectly - A2DP, AVRCP as well as phone ringtone comes through via the headset. Frustrated !!!
Any help/suggestions are welcome !!
Could this be a WinMo issue as opposed to a Blackstone bug ? Found the following thread ........
http://forum.xda-developers.com/showthread.php?t=310438
One way to find out ...... can folks spare a few minutes to post their experience in using A2DP heasets with the Blackstone - were you successfully able to hear ringtones via your headset ?
Cheers !!
*Bump*
Can folks oblige by posting their experience using A2DP headsets with the Blackstone ? Were you able to hear ringtones via your headset ?
Thanks !!
thread digger
sorry bringing this up again
but got EXACTLY the same problem here
tryied the suggestions too, without success
any tips?
[]s
I have a BT headset too that can A2DP. (SE DS-980) I don't think its meant for it to transfer ringtones as what one poster mentioned. Anyway, whenever my phone rings, I can hear the tone from my phone and a common single tone from the headset then the contact info is displayed in the LCD so I know who's calling. Another option is if you have MSVC, you can set it to alert you who is calling and only through the BT headset when it connected. That way you'd know who's calling you.
kieboy said:
I have a BT headset too that can A2DP. (SE DS-980) I don't think its meant for it to transfer ringtones as what one poster mentioned. Anyway, whenever my phone rings, I can hear the tone from my phone and a common single tone from the headset then the contact info is displayed in the LCD so I know who's calling. Another option is if you have MSVC, you can set it to alert you who is calling and only through the BT headset when it connected. That way you'd know who's calling you.
Click to expand...
Click to collapse
thanks kieboy
guess i'll install MSVC
I use my A2DP headset to listen to music on my embedded helmet speakers while in my bike. And of course, to answer calls too. So, looking to the phones screen isn´t a option and the custom ring tones would be VERY usefull
but, if there's no other work around...
[]s