Related
Is there a way to easily adjust the volume using the wheel? Or do we have to get the stylus out :?
Cheers
Just tried SPB pocket plus but it doesnt have a volume indicator, just a control which doesnt show what the volume is set to!
any clues?
What is it that you want to do?
If you move the jogwheel during a call, you can change the voulme of the speaker...
OK, But do you know how to adjust the volume when not in a call without tapping the screen? is there a way to do this please?
probably clumsier than tapping the screen, but if you have both Spb Pocket Plus and MS VoiceCommand, you can issue commands for Volume Up, Volume Down, Volume Loop, and Mute.
You can also tapp on the Comm Manager button and toggle the between (preset volume), (vibrate), and (silent).
Is there a good screen tap recorder which works with the tytn?
I tried Vitobuttonmapper which does this but it messed up all my other button assignments! I just want to be able to assign the voicedialler press and hold function to bring up the volume bubble!
Anyone found a prog which will turn a screen tap into an .exe which will be assignable to a button?
Vijay?
Anyone??????
with aebutton plus 2.4.3 beta (its now in 2.4.4 beta), if you remap the "ok" buttons after adding it, you can select it in such a way (under "\options\restore volume slider\" select "if today is active").
Now in the today screen, when you press the ok button, the volume slider will be activated. You can then use he left right up/down keys to select the volume of choice.
However, upon capturing the ok button, i have to map the ok button to close active apps when pressed twice. Pressing it once, regardless of the program in the foreground yields nothing.
To minimize, i have the use the red phone button.
I use the following mortscript:
Code:
MouseClick 160,0
Sleep 100
MouseClick 160,200
In portrait QVGA.
There's a neater way with VJKeyPress as well, but I can't remember the settings right now
If necessary it'll be easy to turn this into a seperate app.
V
vijay555 said:
If necessary it'll be easy to turn this into a seperate app.
V
Click to expand...
Click to collapse
That would be v. nice! would it be possible to make it landscape aware too?
(i'm to much of a thicky for mortscript..... )
I've found a wonderful opensource device lock application (deltaLock). It can lock the device using hardware buttons and can keep device locked even if device was waked up by sms or gprs connect attempt. BUT. As far as I use my phone for playing music I conclude it is not very handy to have volume buttons nonfunctional. I have just added ability to control volume while device is locked.
The applications consists of two exe files. First, deltaConfig is used to set key codes for unlocking / controling volume. Second, deltaLock, locks device. You can set two keys for unlocking (they have to be pressed simultaneously) and one for each "Volume Up", "Volume Down", "Mute". By pressing volume buttons system sound volume changes, so it is useful not only when music is playing but also when the phone ringing or you are in the middle of conversation. By now, there are 10 sound levels available (common 5 is not enough for me but 10 is ok), it could be increased later (sound volume variable type in windows systems is word, so it can be any integer in range [0..2^16-1].
The best way to lock your device is to bind deviceLock to one of hardware keys. It can be done by Settings->Button, but it is better to configure unlock buttons first
Original deltaLock can by downloaded by the link above, deltaLock with volume control - here. Hope somebody will find this little app useful
assigning lock
hi, my wizard doesn't give me the option to assign delta lock with volume control to a hardware key. i did install the original lock first, and after uninstalling it the button assignment screen still has the original deltalock but givs the error message: ...cannot be opened...
any help would be great,
thanks in advance
The easiest way to fix it is to install original deltaLock again and then simply overwrite files in /program files/deltaLock with those unpacked from archive i provided (just copy deltaLock.exe and deltaLockConfig.exe from archive to /program files/deltaLock folder on your pda).
Sorry, i was too lazy to make an installer, but i'll fix it soon
I made a cab installer
working
many thanks, it's working perfectly now
You're welcome. Glad it's working now.
Hello there,
Thanks very much for that great program, in fact I have another issue, my Volume Control Scroller is not woring at all in my PDA2k (WM5), so it is impossible for me to mute the ring if i don't want to answer the phone, so what i am really searching for is a program like yours but without Device Lock, is there any program that I can change some buttons on my device(while PDA2k has many) to control volume?? I hope i can find like this program with you...
Thanks again,
Ghaith
umm
check AE Button Plus but it isn't free
hey, thanks alot, I tried the program, and it is working for volume control, but while Phone is ringing, these volume controls are not working, so I got nothing
anyway thanks again
Any additional Functions for a Great Program?!?!
Your program seems to be exactly what i am looking for. I carry a veriation of the HTC Wizard branded the Cingular 8125. I hate accidently picking up calls or dismissing messages or alerts when the device is in my pocket, briefcase or while pulling it out of the holester. Your program seems to be right up the alley of what I am looking for. Are any of the programs perameters user definable?
What I mean is, I just don't want to accidently answer a call or ignore a call. Nor do I want to accidently start a program, dismiss an sms, email, reminder or alert. But I would like all of the functionality of the volume slider to mute ringers on incoming calls until they go to vm and use my Windows Media Player and all of its functionality at the same time. I know this seems like having my cake and eating it too, but I have to think these devices are smart enough to handle it.
My idea would be a Device Key Lock user interface where eu had the ability to define through check boxes what programs to allow or not allow while the device or keys where locked. And that all of the functionality of the programs allowed where available.
Is it out there?
Thanks
CG
Part 2
Also a way to define how much time would go by before the device would lock on its own.
CG
On my wizard, a program called SmartsKey (which also mostly works on our Mogul) could use the rocker switch as a volume up and down toggle, when you are outside of a call.
I am annoyed at having to tap the volume icon to change my volume on my phone when at the today screen. We need to have some way to map the scroll wheel's button to open the volume settings when pushed, and then we could simply scroll the wheel up or down to change the volume. Also on the wizard, you could hold down the comm manager button to toggle mute.
I would be willing to work on this with anyone else that would like to try and either make a script or small app that would allow us to do this. It's one of the only major gripes I have so far with this phone. I guess I was just spoiled with the wizard, but I know that this is a hugely capable phone. It would make sense that we could map something to that push button on the wheel. I just don't know how to look for it.
What do you think? Wouldn't that make adjusting the volume a lot better? It seems like this should be the way it works from the factory.
****UPDATE****
I have found a little 48k app that opens the volume balloon. This will definitely work for now, until I can figure out if we can use the wheel button cleanly or not. I have mapped it to the push and hold voice command button, so that when I hold the button, the volume balloon opens. YAY!!
File is attached for logged-in users
That sounds like a pretty cool idea, but I really haven't been bothered too much by the scroll wheel not always acting as volume. I wouldn't know much about writing a script or application, but I'd be happy to help with testing.
A FREAKING MEN. how ridiculous can they be? every phone since the beginning of time has had a hard button to change to vibrate.
Yes, Please! I have found this quite annoying as well. I wish I had the know-how to help you.
Great idea. I find myself never using the scroll wheel for anything and always wanting it to simply control the volume.
try AEBUTTON PLUS i duno if it will work on the mogul, but u can give it a try
if you use the 5-tabbed home plugin from HTC, one of the tabs is ringer profile, and it mutes/vibrate/normal settings allow for quick ringer change. I find that it is enough for my needs.
that is one feature i love on my treo 755. i can stut the volume of with a keyflick. very useful for when in meetings or with a customer (i am a car salesman). when walking up to a customer i just flick off the volume.
i cannot do this on my mogul. i have to unlock the screen, go to the volume tab, then click on the volume. 3 steps that require looking at the screen vs one that can be done in pocket or a holster...
I am currently getting some pointers on where to start from those much smarter than I. Hopefully I will get some responses and will be able to start on this. I understand the concept, but it will just be a little game of connecting the dots. I KNOW that this can be done. And it WILL happen
nonegiven said:
Great idea. I find myself never using the scroll wheel for anything and always wanting it to simply control the volume.
Click to expand...
Click to collapse
That is exactly how my Mogul works....... hold it up to your ear and try it.
now.... i want to design a sturdy replacement back with a coiled antenna and a place to store all these 2 Gbyte micro-SD chips
7r380r said:
That is exactly how my Mogul works....... hold it up to your ear and try it.
now.... i want to design a sturdy replacement back with a coiled antenna and a place to store all these 2 Gbyte micro-SD chips
Click to expand...
Click to collapse
It works this way when you are inside of a call, yes, but I am referring to when you are OUTSIDE of a call, such as at the today screen. Currently, the only way to adjust the volume outside of a call would be by tapping on the volume icon and adjusting the volume.
The idea is to push in the scroll wheel's button to open that volume adjustment screen, so then we can just scroll the wheel up or down to change the device and ringer volume.
I agree that there needs to be a volume control like other HTC devices, however the scroll wheel is great for navigating menus, and pressing it in is the "enter" button. Would you really want to give that option up for something else? Imagine scrolling through your emails and you find the one to open and press it in only to be presented with the volume control instead. I wouldn't want that...
Also, remember that the scroll wheel and d-pad are linked. The hardware can't differentiate the two- in other words, whatever you set the scroll wheel and press-in to do, the d-pad and center button will do as well. Think about this really hard before you try it.
bump for the update
update from whom? This is your own thread!
Dishe said:
update from whom? This is your own thread!
Click to expand...
Click to collapse
I edited my first post to include the zip, and then the thread was down towards the bottom, so I posted a bump reply so that it could be up to the top again, in the way it would have if I had posted the zip by hitting reply instead. Make sense?
I'm working on something similiar to this... kind of tricky...
I don't want to hook the whole input subsystem, so what I am attempting to do is create a today plugin and that will sieze control of the wheel when on the today screen and change the volume.
I've got it basically working, just need to tweak when it grabs control; right now it does it on WM_PAINT, but that message is sent quite a bit and spikes processor usage. And I'd like to get it working without actually drawing a window, not sure how well WM6 will play with that.
Aso need to see if I can make this work without it being the first item on the today screen.
For those interested the ticks on the volume balloon are the following values:
0xFFFFFFFF
0xCCCCCCCC
0x99999999
0x66666666
0x33333333
0x00000000
You can use those values with waveOutSetVolume(), just use NULL as the first parameter and the DWORD level as the second.
When I get it working, or tired of fighting with it, I'll post the source code.
kmartburrito said:
I edited my first post to include the zip, and then the thread was down towards the bottom, so I posted a bump reply so that it could be up to the top again, in the way it would have if I had posted the zip by hitting reply instead. Make sense?
Click to expand...
Click to collapse
oh, ok!
As promised, consider it an alpha version. I have included a release compiled dll, the source, and a sample .reg file.
Basically, it is a today plugin that steals the focus whenever ever the today screen is shown, then uses the wheel to raise and lower the volume. I think it has to have a visible window, so I made the window 1 pixel high and transparent.
Probably still needs a little work painting and figuring out when to grab focus. Right now I use the WM_PAINT as a test because I figure if the window is getting drawn then it is a good assumption the today screen is active.
Please post any updates to the source.
For those using Wisbar Advance and a button mapping app like Smartskey, you can map the scroll wheel button push to the WA volume adjuster, right?
"mute" button
It's not exactly what you're talking about, but you can get a cab at http://ppcgeeks.com/ring-toggle-hardware-fix-for-mogul-titan-t8079.html that lets you set any hard button to toggle between vibrate and ring. So you can use it as a mute button (but not quiet/loud).
Hey all,
One off the pet hates i have about the hermes as compared to the wizard is the loss off the volume adjust on the left hand side.
I like the scroll wheel on the hermes but i hate that it doesn't automatically activate the volume bar, having to get out the stylus and tap the volume icon, or smudge up the screen trying to clumsily tap it with my thumb is annoying.
Is there anyway of making a press and hold of the wheel activate the volume? or anything along those lines?
I'm sure I'm not the only one with this pet hate.
Thanks in advance.
i would love this feature.. i miss it from my wizard
I have been trying to do this as well with key mapping software. However I cant find one that will open up the volume controls when I press a specific button. I am able to map presses to volume up/down but thats not what i want. Hopefully somebody else has a solution.
I know exactly what you guys mean.
@Knockz... have you tries this already with AE Button Plus? The new version better recognizes keys that the older versions could not.
I'll give it a try and see.
addfoster said:
Hey all,
One off the pet hates i have about the hermes as compared to the wizard is the loss off the volume adjust on the left hand side.
I like the scroll wheel on the hermes but i hate that it doesn't automatically activate the volume bar, having to get out the stylus and tap the volume icon, or smudge up the screen trying to clumsily tap it with my thumb is annoying.
Is there anyway of making a press and hold of the wheel activate the volume? or anything along those lines?
I'm sure I'm not the only one with this pet hate.
Thanks in advance.
Click to expand...
Click to collapse
Think I may have the solution to your needs:
What I've done is use this portions of Wisbar (WisVol.exe) someone extracted from the full program.
Copied WisVol.exe to SD Card under programs
Made a Shortcut to: \Windows\Start Menu (with Resco Explorer)
Mapped my PTT Key to the new shortcut
Now I can access the volume with out using my stylus.
I use the PTT open the volume settings and the wheel to increase or decrease the volume.
Hope this helps....
Here is the file....
PTT Key?
Thanks Jac, I will have to give this a try. I should be able to map the exe directly to a key using aebutton plus. Hopefully this works.
PERFECT!!!! Just gave it a try. Linked my PTT key to the program using AEButtons Plus and now when I press it I can scroll my volume.
Thanks for the tim Jac. Somebody should build this into the next rom.
addfoster said:
PTT Key?
Click to expand...
Click to collapse
On ATT 8525 HTC Phones have a new function Push To Talk (PTT) Kinda like a walkie talkie function
ahhh, well i got it all as i need now, using that wisbar and AEButton plus. Thanks to all.
Hi all,
I wanted you all to know another cool feature, use AEButton to trigger the wisbar volume bubble from the following post (it does not adjust volume on first click and it has a smaller step for volume settings):
http://forum.xda-developers.com/showpost.php?p=1591985&postcount=5
Regards,
Nika.
WisBar Volume CAB
I've been using Wisbar Volume for quite a while and it's been wonderful...
To give back a little here is a cab I've made for easy install and removal with a shortcut to start menu (sorry no graphics for the shortcut)
I've also been using for a while the Wisbar Volume control above...it works great!
Might there be a registry tweak for the number of steps for the volume button? I generally listen to music with the screen off. If I want to change the volume using the physical button I am limited to 5 steps. However, the volume control for the HTC player has 15 steps; much more usable. Is there any way to change the button increments to 15?
Thanks in advance.
-Bob-
It looks like if you go to the registry you can change where you want the small volume control used in music player to appear and add it to other apps. So hopefully someone will be able to figure out a way to make it appear all the time.