Related
please help i have the t-mobile mda compact pm200 and i was removing a cracked version on pocket dos v1.09 from the remove list and it said windows wil need to perform a soft rest yes or cancel i clicked yes and my system restarted but now it just get stuck at the t-mobile screen. i have tried doing the manufatures hard reset but no joy i have take out the battery no joy and i can't even access it through my p.c what can i do to get it up and running again i don't care about the data already on there cuz it is all backed up on my sd cad
When you took out your battery, have you been waiting til the backup battery fully drained out? It takes about 30-60 minutes, better leave a few hours. Try this and post your results...
thank for trying but unfrtunatly it had no effect i tried for two hours then reinserrted it and no joy so i waited a further day but still nothing any other ideas tnx
Is it getting into BootLoader? Then you might try Flashing a new ROM!
how would i go about doing that? my computer won't even recognis3e my phone
I had about the same problem:
I was trying to install the Pocket PC Greek language support (free trial version) from the site http://greek.pocket-pc.penreader.co...der_Greek.html. on my MDA Vario Tmobile when it crashed!! It shows just a white screen and does nothing at all!! I soft and hard reseted the device but after restarting it shows the Tmobile screen and after a few seconds a white screen! Actually I am not so sure that the device is hard reseting because it doesn't ask me for a confirmation of the hard reset. When I startup my device it stops on the same white screen.No windows loading, no other commands accepting, not recognized by my desktop.
Did anybody have the same problem before? Does anybody know how can i get my PPC on working condition again
Thanks dagonist.
I hope somebody can help....
See for ROM upgrades on the forum :wink: if u get some images on the mini then it's not dead! It's just stuck at the bootloader mode, meaning that the OS is somehow damaged.. To solve this prob u must plug the mini into the pc (it will be recognised as an unidentified device, don't worry), then download a ROM upgrade set (u will find these on the net or in the xda-dev ftp). Execute the prog, wait 'till it finished and voila! Ur device will come as new If u encounter problem do a simple search in the forum regards rom - bootloader - upgrade and u willl find a lot of infos :wink:
Hope this helps, MocciJ
Thanks MocciJ.....but my desktop pc doesnot "see" my pocket pc at all!!
:? then it isn't yet in bootloader, is just stuck at the beginning of a broken OS! I mean that it tries to load the OS, but then it gets stopped since he read bad ROM (probably deleted in some way since u encountered this prob removing a prog) try to get it in bootloader mode, by pressing together the camera, power and reset buttons.. U will lose all the things in the RAM memory, but in this case u really can't do anything else.. After entering in bootloader, u can easily upgrade it..
MocciJ
Well, I just tried the camera button+power button+reset button....and nothing happens! It reset and comes back to the same white screen...
Any other suggestions??
well, did u tried to make it correctly? I mean: for entering boot loader u havce to press camera + power, and then reset (with camera and power pressed) if u can't still enter the bootloader, then I'm out of ideas, sorry...
MocciJ
I amdoing it write but nothing happens....
In the screen what can u read? If u read serial (it is barely visible) then see if it turn to usb when u connect the cable: if yes, we 're at a very good point...
When it starts up it shows the Tmobile logo and then for a few seconds :
ipl 1.08
spl 1.08
gsm 01.09.10
(something else...)
after a few seconds a white screen without any letters or anything else.
But I cannot see it anywhere on my desktop pc...
:? I can't figure out how you can get it back.. If it displays images and text, then the bootloader is still alive.. It even tells u the correct version of the complete ROM.. but I wonder why it can't access to the bootloader.. u must search in the forum how to reach the bootloader, but I'm sure of the power camera reset combination; when u can read SERIAL or even better USB on the device, u probably have solved most of ur problems, but chances are that u have even bad clusters of ROM, and cannot be restored with an upgrade (it happened to the External Rom of my mini after a bad upgrade)
I suggest to send it to repairs, before doing somewhat wrong, because if there is an original ROM inside they will repair it for sure, free :wink:
MocciJ
Thanks. The problem is that I got the phone from ebay, from a UK seller, and it was locked to Tmobile. So I don't think that I can ask for a factory/guaranty repair....
Thanks. The problem is that I got the phone from ebay, from a UK seller, and it was locked to Tmobile. So I don't think that I can ask for a factory/warranty repair....
seee i tried all of thoose things but i found the main problem was getting the computer to recoginise the thing and the program i put on was a cracked version ( i know i am a naughty boy) so if i send it off they could cause legal problems couldn't it
it depends on what u are meaning by "not recognised" but I assume that windows dosesn't even try to recognise the device (I mean that there aren't bubbles, notifications, or any other changes on the system) for the cracked software, well if u have installed it right into any RAM folder (not in the storage memory) then u can tell the repairing center that ur unit simply doesn't power on correctly.. :wink:
MocciJ
Hi Friends,
My new mobile phone SPV M600 got stuck whil starting showing four lines of messages as shown below.
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 2.10.1.22
Can any one please help me in geting my phone to today's screen.
I also attached the screen shot for reference.
did you try a hard reset ?
Ya I tried both hard as well as soft reset but same screen is stuck again and agian.Can any one please help me in this regard as I am very new to PDA family.
Ok, first things first:
Since you are new to this, are you sure you preformed a hard reset?
It is done by holding power + camera + comm manager buttons (one on the right, two on the left) and pressing with stylus in the reset hole at the same time.
A message should appear asking you to press 'send' (green phone button) to confirm reset.
If this does not help, you may have a serious problem.
Please answer the following:
Is the device fully charged?
Phone will fail to boot if the battery is too low.
Did you install any software right before this happened?
This should have been resolved by hard reset, but just in case I am asking.
Did you change the ROM, attempted CID / SIM unlock?
This could require more serious measures than I can advise on.
I did exactly the same thing which you mentioned.But even then it is stuck at the same screen.
Ya u r right I unlocked my mobile using a software from eBay.The unlock was successfull and I tried to insert T-Mobile sim, it also captured the signal and I was able to make and recieve calls then after that I wantedly switched off the phone and then tried to start it, there got the problem.
Can any one help me in this regard please.
I am having the same problem, but my phone is not sim-locked.
I've got the same problem after attempting smart1_wm6_pp8mb.exe
I'm having the same problem with my G4 QTEK S200:
Attempted to upgrade to WM6 Rom using smart1_wm6_pp8mb.exe
After reboot the phone got stuck at the QTEK Screen
Tried Hard Reset (Camera+Power+Comm+Reset) followed the steps with the same results (bricked)
I also tried re-flashing the rom back to the factory one using RUU_Prophet_220734_2207114_024721_QtekWWE_Ship and ROMUpdateUtility-NoVendorID.exe in Windows Vista with WMDC (Windows Mobile Device Center v. 6.0.6873) and the phone in boot loader mode (tri color screen) with working USB cable, with windows firewall disabled and symantec AV disabled as well, RUU keeps saying error 260 "the update utilitiy cannot connect to your pda phone..." .
Do you think I should try this process using XP instead? No matter what i try i keep getting the error 260
Any help would be greatly appreciated
Got it fixed!
it was definately a Vista issue. once i tried it in XP with ActiveSync it worked like a charm and i got my phone back up and running. also used spb backup and restored all my settings.
ipl/spl screen
i got the same problem with new rom wm6, and the 260 eror, my problem is that i have xp and the activesync does`t connect ...
... means i cant redo the original rom ????
PLEAAASEEE HELPPPP !!
Again My phone SPV M600 got stuck at IPL/SPL screen
Please Can some one advice me how to get my phone back.
I raised the same issue 7 months back after that my phone got recovered automatically and there were no issues till last month. Last month onwards it is again got the same problem and now it is permenantly stuck at that screen what ever you do.
yekanth said:
Please Can some one advice me how to get my phone back.
I raised the same issue 7 months back after that my phone got recovered automatically and there were no issues till last month. Last month onwards it is again got the same problem and now it is permenantly stuck at that screen what ever you do.
Click to expand...
Click to collapse
A rom reinstall on xp solved my problems on that one. retry a couple of times! It may not work the first time! hard reset as well...
Try an official wm5 rom just in case
good luck
Can you please gimme step by step procedure
HI Phil,
I am new to these kind of installations . CAn you please Gimme step by step procedure for ROM installation.
mine is now also stuck, after trying to install new rom. wont connect to active sync either, have i fooked it? tried hard reset etc.
thanks
(with a turned off phone, press and hold camera button then insert USB cable)
then flash provider ROM
RECOVERING FROM ERROR IN STEP 8 WM5->WM6
1. Don't panic
2. Don't panic
3. Unplug the phone
4. Reset with stylus,and keep the Camera Button pressed.
5. A 3 color screen will appear(Bootloader Screen)
6. Connect your device with your PC,and run the NVID(no vendor) WM5 rom.
7. The device will be resetted after RUU(rom update utility)finishes
8. Repeat the WM6 upgrade,from STEP 5..
Click to expand...
Click to collapse
from here http://forum.xda-developers.com/showthread.php?t=310452
hi jay
i seen your post in n00b guys one, i fixed it!!!!, thank you so much, i couldnt remember how to get it to those 3 colours.
thanks again
Colin
Hi Iam unable to get the NVID ROM
Hi,
I am unable to get the NVID ROM. The Rapidshare link that has been provided in the other thread is not working. Can some one tell where can i get the ROM.
collywog19 said:
i seen your post ...
Click to expand...
Click to collapse
no problem mate.
..and yekanth i see what u mean about the dead links. i have the files on my computer at home but i'm posting from my prophet right now, so i can't upload. Try using the "pdaviet temp" from one of the wm6 threads?
(http://rapidshare.com/files/54265407/Prophet_PV_Temp.zip)
Hi Iam able to update the Rom but no use
Hi,
To mention my phone is from orange-UK. I got the orange rom from our FTP site and did the flashing/update what ever you say.But still it is getting stuck at the same IPL/SPL screen. Iam very much worried that I will not get a proper solution for my problem.It will be very grate full if some one resolve my problem.
just seems strange...how did you fix it last time? did it just start working again? A random guess would be that the camera button got liquid spilled on it or is stuck in.
If the camera button is pressed in the phone will go to 3 colour screen every time it is turned on.
It won't do any harm if you try to press/move that button to see if u can "unstick" it, not likely I think but u never know...
Hi,
I tried a new rom and now am stuck at the bootloader with no OS on the phone.
ipl 2.10.0001
spl 2.10.0001
gsm 02.69.21
os 4.0.0.0
I have searched all the forums and still cannot get my spvm600 to do anything. I have tried to run several roms but the problem is they cant see the phone as activesync wont connect. is there a way i can boot from the sdcard or somthing or do i have a expensive paperweight. when i try to hold down the camera and comms keys on start it asks me to format the device and then says doen and goes back to the above screen
anyone?
ideas?
Try to restart your device and deliberatly go to boot loader (keep camera button in) (keep usb disconnected).
once at boot loader screen connect usb cable ... you should now see "usb" in bottom left corner on device screen.
now run a wm5 rom like in step 1 of "how to upgrade from WM5 to WM6" thread - - http://forum.xda-developers.com/showthread.php?t=310452.
it worked for me!
every rom i try to install on it needs activesync to connect to it but activesync douesnt connect to it as the phone has been formatted. there must be a way to fix it but but i am totally stuck
Rom Upgrade doesnt need Active Sync, you just need to be in bootloader and have the usb cable connected. Then just go through the update utility.
I try that and it still seems to say no device connected would you like to try copying again. I cant understand it cause it makes that bling noise when i plug it in
Use Update_NOID
You must use the No_ID Updater to upload a ROM from the 3 colour screen. Just run this exe file and you should not have any problems.
Hi,
Please help, I too have the same problem. Installed all the versions but no use. Can any one help me how to downgrade to Original German ROM version for Neo. So that I can return to O2 company... otherwise this become expensive paper weight
thankyouthankyouthankyou
YEEAAAAHHH
my phone is now working.
the no id rom worked a treat.
xtrafletch thanks a million!!
Hi,
Il from Belgium. SORRY FOR MY BAD ENGLISH
I have a Qtek S100
R 1.01.00
G 133.38
D 1.03.02 FRE ( French i think )
I tryd to change my Extended Rom from French to Dutch or English... with some file i dont know... im new it this stuff and i F**kt it up!!!
My Qtek just goene black and on the screen u can see USB 1.0.0
After open the baterycover and plug in back the qtek starts BUT after starting install the original app. it goes back to thr BLACK screen and nothing happens.
If I plug in the USB and connect it with my pc, it comes on the screen USB 1.0.0 ....
SO PLA HELP ME PLS!!!
I tryd hard / soft reset, NOTHING!
I look at XDA alredy 4 days everyday 4-6 hours I tryd SO MUCH, I take a day off work, so to can fix it!
IM GOIN CRAZY PEOPLE!!! PLS PLS HELP ME!
Best thing to do is go to bootloader mode and installing a new flash.
Bootloader mode can be found on the forum, but to help you out:
press simultaniously: camera button + power + soft reset (last one with the stylus)
Then start the rom update on your pc (do not use this from vista it wont work (or you have to find the fix online..)
Easiest way is to flash from windows xp works like a charm.
I have the same problem than rocky_gent but I can get the bootloader mode
i'm stack in bootloader mode ! And when i connect the usb cable doesn't display the "USB" but insists with "Serial V1.00".
I want to upgrade my rom from a secure digital (sd) cause i don't have another choice!
I 've been surfing through forums but i only found how to make an sd to upgrade your phone when you have an mda or xda (.nb1 files) . Qtek's roms have .nbf files !!! So i'm looking instructions to make an upgrade sd card with .nbf files (Qtek , Htc Magician) and not .nb1 (Xda)!!
http://forum.xda-developers.com/attachment.php?attachmentid=24569&d=1127232848
?
where can i get new flash? and yes im with vista, why it wount work???
hallow evryone...i am just a fresh user of WM and i got a i-mate k-jam g3 from ma elder bro... and i tried to upgrade it with WM6.5
but the stupidity that i did was.... i installed a charmer version in the wizard and now its stuck in the logo screen. :S
this is the rom that i installed:
http://forum.xda-developers.com/archive/index.php/t-502194.html
please guyz..help me out...
now that i cant run my wizard i cant connect with windows mobile device center and cant install new rom...
what should i do now??? how can i go back to my old WM5 ???
m really worried about the wizard...i was so happy to have that and now i messed evrything up...
please assist me how can i recover from this problem.....
thankuuuuuuu
try this
sunxray said:
hallow evryone...i am just a fresh user of WM and i got a i-mate k-jam g3 from ma elder bro... and i tried to upgrade it with WM6.5
but the stupidity that i did was.... i installed a charmer version in the wizard and now its stuck in the logo screen. :S
this is the rom that i installed:
http://forum.xda-developers.com/archive/index.php/t-502194.html
please guyz..help me out...
now that i cant run my wizard i cant connect with windows mobile device center and cant install new rom...
what should i do now??? how can i go back to my old WM5 ???
m really worried about the wizard...i was so happy to have that and now i messed evrything up...
please assist me how can i recover from this problem.....
thankuuuuuuu
Click to expand...
Click to collapse
can u see the bootlload mode??
is a coloured screen (varoius colors in horizontal bars)
if is possible then, flash again, with a wizard ROM now...
i hope you can fix it........
bro... its not the 4coloured screen...
its the screen written "IMATE" and its only blue...
and to flash with a new rom i need to sync my wizard with the PC... but my wizard is stuck in the one color (blue with the imate logo) screen...
To sync with your pc you must be at bootloader (tricolor) screen.
I took the following from the Wizard Wiki.
''To go to the 3 coloured bars , just press and hold the power button (top) + voicedial button(right top) keep it pressed and hit the soft reset hole (keep the other 2 buttons pressed until the 3 coloured bars come up)''.-