Question # 1 : If I change my T-Mobile Vario rom into Qtek 9100 rom , will this have an effect on my EMEI number ?
Question # 2 : Do I have to unlock my Vario first before I update my rom to Qtek 9100 ?
:?:
A ROM update has no effect on your EMEI
yes you will have to unlock it first , see here
I did it!
My MDA Vario T-Mobile have now Qtek ROM and 50MB RAM instead 44mb!
Check this tool to ulock CID to can upgrade:
http://forum.xda-developers.com/viewtopic.php?t=33796
IMEi is same.
Related
Guys, I have O2 XDA2 with ROM 1.66.00WWE, ext ROM 1.66.165, and bootloader 1.06,
I want to upgrade my XDA2, so I downloaded an i-mate ROM version 1.72.126,
and using ER2003edit I changed the carrier from CDL to O2,and leave all parameter as it is...
but when I run himaupdate.exe, it said country id error,ce checksum error, etc,etc...
then I change the carrier gain to CDL, still no luck...
last, I repeat again the first step above, but I didn't use ER2003edit, so the ROM is original (still in CDL carrier, right), voila, it passed the error message, but I'm affraid to click upgrade button since mine is O2 XDA2 not imate...
is it ok to upgrade?isn't it strange that my O2XDA2 choose CDL carrier for upgrade?
please help...
bump?!
UPGRADE ????
darkcell, my friend.
your conclusion is ; this is failure hardware.... not only rom, so, that's a big problem !!!
how opinions from o2 club, jakarta (ivan or niki).
thank's
afaik eredit2003 is only capable of changing operator id's (=country id) for the Extended ROM.
Please see the upgrade instructions on this site on how to make the iMate rom work with your O2 XDAII
Has anyone managed to sim unlock the orange m600 unit
I have tried the lokiwiz from another thread but it didnt work.
rom version is 2.10.1.22 wwe
radio 02.07.20
extended rom 2.10.1.107
operator version 13.10.1.107
thanks
When you do manage it, do share the ROM!
willing to hep
IF anyone is working on this i would be willing to help
Me too ....
I can't unlock my phone to use my two SIMCards
HELP me ...
Please
(It's ORANGE FRENCH SPV M600 !)
Lockiwiz can only unlock your Prophet device if your Rom version is 1.XX.XXX. For the new AKU2 ones there is no solution yet.
:?
We just have to wait for an updated version of LOckiwiz or aWizard tools.
Ok, had a modicome of sucess with this, converted it to a Imate Jamin and then used the wizard unlocker to sim unlock it. Its works fine for voice but have not got the gprs to work yet. Although i am using a dual sim and this may be the problem.
will let you know as things progress
Has anyone tried the Imei check site (http://www.imei-check.co.uk/m600unlock.php) I know you have to pay for this, but that is still better than having your phone locked to orange (nothing against orange, just that I have an o2 contract...)
IMEI Check
Works ok unlocked mine there yesterday took less than 5 mins
Ok, thanks, i will stand a new version
Right, let me get this straight...
"Lockiwiz can only unlock your Prophet device if your Rom version is 1.XX.XXX. For the new AKU2 ROMS (i.e Orange M600 ROM) there is no solution yet."
If this is the case, then can we use A-Wizard or the hacked romupdateutility to FLASH back to a pre-AKU2 ROM and then use Lokiwiz to unlock the device, and then flash back to a 'latest AKU2 ROM' (Dopod one is latest and greatest atm) and continue to have a SIM UNLOCKED device???
Please can someone try this? I get my M600 in a week and need to be able to unlock it. Am in the USA atm and need to use a T-Mobile SIM in it.
Appreciate any help.
No lokiwiz can unlock the newer version, i have one and its done it fine, the problem is to achieve this i had to convert the unit from orange to either a dopod or an imate jamin.
Once flashed with the new rom lokiwiz quit happily unlocked the sim.
The only problem i have is i managed to disable the gprs connection detection. I think its something to do with the radio update and not quite getting the conversion right. I have been following the instructions from this and other sites and might have made a mistake.
Hopoing t sort this when i get time
I don't understand ???
You can UNLOCK or not ?
You want my ROM for check it and understand why it doesn't work ?
popeyesfx said:
No lokiwiz can unlock the newer version, i have one and its done it fine, the problem is to achieve this i had to convert the unit from orange to either a dopod or an imate jamin.
Once flashed with the new rom lokiwiz quit happily unlocked the sim.
Click to expand...
Click to collapse
thanks popeyesfx, but which ROM version did you flash to and how did you do it? Was it the new AKU2 Dopod rom specifically?
Did you have to use A-Wizard first to change CID or did you use the hacked romupdateutility to flash the rom from Orange to Dopod/I-mate?
Thanks
I used the modified update util of the ftp site and then used the latest jamin rom from the ftp site, this updated fine and i didnt get any operator errors.
I then used lokiwiz and it unlocked the sim fine.
just as an aside, the problem with the gprs turned out to be a thing with the orange unit itself. I tried a non flashed on and it has the same problem (doesnt show the connection but will connect to it fine when triggered by other software)
there is another link on here that gives you a full discription on how to convert the unit just cant remember it (old age im afraid lol) :lol:
Which ROM to install on an Orange SPV M600?
Just got a new Orange M600, herebelow is the device info;
ROM version: 2.10.1.22 WWE
Rom Date: 2/16/06
Radio Version: 02.07.20
Protocol Version: 413.1.03
ExtROM version: 2.10.1.107
Operator Version: 13.10.1.107
IPL 2.10.0001
SPL 2.10.0001
I used machinagod lokiwiz 0.3 to SIM unlock my SPV M600.
Now;
1) Will my phone be SIM Locked again if i did a Hard Reset?
2) Which ROM is the latest and best and can i install it on IPL/SPL 2.10.0001? If yes, then how?
merci pour l'astuce
Free Unlock Tested Prophet Spv M600 Pm300 From Amena
HI...
It's simple and the process is free ...
Only thing you need is the program Lokiwiz03a and no more. . .
1. Copies Cert_SPCS.cab, EnableRapi.cab to spv
2. install in the spv; 1. Cert_SPCS.cab, 2. EnableRapi.cab in order. . .
3. running the LokiwizMsl.bat which give you the code which you enter with not accepted simcard. . . enjoy. . .
work on all version and all spl . . . tested on ipl 2.15.0001 spl 2.15.0001 g4 chip . . .
Big thanks Juliocesarmaster ! Worked 1000% !
Juliocesarmaster that worked a treat thanks
I have just got a mda wizard vario and just wondering what is the best rom to update to, i have sim unlocked it but to update the rom i need to cid unlock it as well dont i thanks for your help.
yes you need to cid unlock ...best rom... latest i-mate one.
Hi Masters, My Qtek 9100 after appliying WM6.Crossbow.WWE.HTC.Wizard.v5.2.660-sck update ROM procedure, the device remains in the Three color screen with the codes:
IPL 2.26.0001
SPL 2.26.0001
GSM (not appear).
1?
Have some of you the original ROM for Qtek 9100, or where I can find a fix?
Please HELP ME, please.
Greetings for Caracas, Venezuela.
Well, your WIZARD is not DEAD - just starting in BOOTLOADER mode. Looks like you did not flash it right! SOLUTION: Flash it again - in case the WM6 won't flash try another ROM (best thing: your shipped one!).
Since you'e a QTEK owner you can register at the QTEKs homepage with its IMEI number (you can find it under the battery on the label) and download the latest ROMs ...
Still remains in Bootloader Mode
Hi June2003, I try to reflash the phone many times, but the status is the same, one of the thinks that I concern is that the Rom Update Utility ver 2.5.2 not show me the current version of my Qtek (the version the lastest ROM in Qtek site doesnt work) and the upgrade version.
Before the execute the process, I read some posts into this forum that Qtek 9100 aka Wizard could be upgrading from WM5 to WM6, and this is the reason about my phone is freeze.
Any advice......
Best Regards, Ulises.
The word for today is "wizard love".
Good Luck
well i use the uspl in the first update and dont problem but my girlfriend had flashed it with a ESN Rom i dont Know witch and now her devices is on the 3 color what can i do
i try to fla**** with
tmo wm6
o2 wm6
dopod 2m5
o2 wm5
greasy wm6
and nothing sayme the id vendor or the error the image is corrupted any suggest? the artemis is an Tmo compact 3 german and "supposly" with the uspl now the values are
ipl 3.07.0001
spl 3.07.0000
EDit with the usb monitor i had found my device is cid locked to the next T-MOB003 does any knows here i can get a dumped rom or offcial rom with that cid thx in advance
any idea where i can get a rom from tmobile nl wm5 or wm6 any one can uploadit or post the S/n of your device only for download the software plz help
i need a rom with the next cid T-MOB003 plz help me
londere said:
any idea where i can get a rom from tmobile nl wm5 or wm6 any one can uploadit or post the S/n of your device only for download the software plz help
i need a rom with the next cid T-MOB003 plz help me
Click to expand...
Click to collapse
goto tmobile.nl and download it
but my serial number its not valid can any one provideme the rom or the serial number for t mobile nerderlands
http://rapidshare.com/files/40989480/ARTEIMG-new.rar
Copy .nbh in memory, resolve bricked
ok
thx alot my friend trying
it dident work plz i need the tmob nerderlands rom for artemis cid = t-mob003 or the serial number from a tmobile rom from nederlands
http://download.sunrise.ch/downloads/manuals/qtek-windows/P3300_softwareupdate_GER.zip
i need it from nl not german plz #### for crhist love any one who provideme the serial number of your artemis for download from here http://member.htc.com/ruudownload/t-mobile/TMobileWM6Step1-TMNL.aspx plz pm### or post the rom here
closed solved found the rom herehttp://forum.xda-developers.com/showthread.php?t=348349&page=1